Search

Abstract: The Heartland Area Redwater CO2 Storage Project (HARP) is a staged CO2 storage project located near Edmonton in the industrial heartland of Alberta, Canada. The project, being developed by ARC Resources Ltd. of Calgary, aims to store CO2 captured from diverse sources into the very large Redwater Leduc Fm. carbonate reef situated at depths between 922 and 1234 m and with a thickness of up to 275 m. In the first stage, a pilot operation will be implemented by the spring of 2011 that will inject between 200 and 300 t CO2/day. In the second stage, depending on the regulatory and economic environment, the pilot may be scaled up to a commercial-sized operation by 2015 that will inject at least 1 Mt CO2/year. Each stage of the project has several phases, with Stage I/Phase I having been completed in the summer of 2009. Work focused on the characterization of the storage unit: Namely, the Redwater reef, its caprock, and the immediately underlying and overlying aquifers. In Stage I/Phase II, injection and monitoring wells will be drilled and site-specific characterization and pilot design will be completed, while at the same time seeking regulatory approval and community acceptance for the pilot operation. In Stage I/Phase III, the pilot operation will be constructed. A multi-disciplinary, multi-organizational research program comprising major research organizations and universities in western Canada is being built around this CO2 storage project. This paper presents the results of Phase I of the project: Characterization of the storage unit and adjacent strata. [Copyright &y& Elsevier]

Abstract: This paper will present results of a numerical modelling study on CO2 migration through abandoned wells. Leakage of CO2 through plugged and abandoned wellbores is one of the major concerns for long-term safety and effectiveness of geologic CO2 sequestration. For risk assessment and mitigation, it is not only important to understand and characterize the potential for CO2 leakage through wellbores but also subsequent CO2 migration beyond the primary sequestration reservoir. Subsequent to the leak, CO2 may take a direct path towards the accessible environment or it may migrate in an indirect stair-stepping manner through wellbores/fractures across multiple, shallow permeable strata. In the later case, identification of leak source and application of mitigation strategies may become a challenge. For this study we use data from a site in Alberta, Canada which has reported natural gas leak at surface. Investigations on origin of the gas and potential gas migration path from the original source to the surface at the analog site show that the gas could be moving through multiple wells and across multiple formations. There are multiple wells at the site which were drilled and abandoned without production casing and are completely open between two hydrocarbon bearing zones creating cross-flow across zones through open wellbores. Our study focuses on the deeper formations and potential for leakage for CO2 injected in deeper formation. A complex numerical fluid-flow model is developed for the site in FEHM, LANL’s porous media fluid-flow simulator. The model explicitly accounts for wellbore details such as abandonment plugs, casing, annulus cement, etc. The model was used to perform long-term simulations of CO2 injection and potential migration through abandoned wells. Numerical simulation results show limited migration of CO2 through abandoned wells. Such detailed simulation would be valuable to develop effective abandonment practices as well as mitigation strategies at CO2 sequestration sites. [Copyright &y& Elsevier]