Search

Abstract: Studies have been carried out to show that there could be benefits in employing a hybrid of the post combustion capture and oxyfuel processes. The former is suited for retrofit purposes but involves an energy intensive solvent regeneration process. The oxyfuel process would result in high partial pressures of CO2 in the flue gas making separation easier. However, the Air Separation Unit is also energy intensive and significant modifications would have to be made on the power generation process. An enhanced- O2 coal power plant with post combustion CO2 capture would produce flue gas with reduced mass flow and higher CO2 partial pressures. The dynamic response of the downstream CO2 capture plant was studied in this paper. [Copyright &y& Elsevier]

Abstract: The permeability of the coal seam is the main petrophysical property controlling the performance of the ECBM operation, since it affects both the CO2 injection and CH4 recovery. In the present paper, coal swelling of intact coal samples is studied both under unconstrained and constrained conditions. Unconstrained swelling experiments are performed in a view cell under a static high pressure gas atmosphere, whereas gas injection experiments are carried out in a flow cell, where the sample is subjected to a given hydrostatic confinement. Both experiments are performed by using different gases, namely He, CO2, CH4 and N2, and under typical coal seam conditions, i.e. at high pressure and at 45 ∘C. The results of the unconstrained coal sample showed that swelling increases monotonically with pressure up to a few percents for adsorbing gases, with CO2 swelling coal more than CH4 that swells more than N2, whereas for helium, a non-adsorbing gas, volume changes are negligible. The results of the flow experiments were successfully described using a mathematical model consisting of mass balances accounting for gas flow and adsorption, and mechanical constitutive equations for the description of porosity and permeability changes during injection. Results showed increase in permeability with decreasing effective pressure on the sample. Moreover, when CO2 is used a permeability reduction was observed compared to Helium, which can be explained by taking into account the effects of swelling on the flow dynamics. [Copyright &y& Elsevier]

Abstract: There is strong world-wide interest in developing new and improved processes for post-combustion capture of CO2, usually using chemical absorption. Developers of new processes make positive claims for their proposals in terms of low energy consumption, but these are usually difficult to validate. This paper demonstrates that rigorous application of thermodynamic analysis and process simulation provides a powerful way to quantitatively evaluate the energy requirements of CO2-capture processes by applying this methodology to the analysis of the chilled-ammonia process. [Copyright &y& Elsevier]