Search

• Solar photovoltaics stored by using cheap and abundant materials. • The Calcium-Looping process is integrated as electricity stored system (40% efficiency) • Electric-to-electric performance of the whole system reaches 57%. • A notable cost reduction could be achieved as alternative to batteries. Solar photovoltaic plants are today a competitive alternative to power plants based on fossil fuels. Cost reduction in photovoltaics modules, scalability and ease of installation of these plants are enabling a rapid worldwide expansion of the technology. Nevertheless, dispatchability still remains as the major challenge to overcome due the intrinsic variability of solar energy. Most of the current solar photovoltaic facilities at large scale lack energy storage while those with storage systems rely on expensive batteries. Batteries are based on elements such as nickel, lithium or cadmium whose scarcity hinder their sustainability for storing energy in the large scale. This manuscript presents a novel concept to integrate thermochemical energy storage in photovoltaic plants. Furthermore, the concept is also directly adaptable to wind power plants to store surplus energy. The paper analyses the suitability of the Calcium-Looping process as thermochemical energy storage system in solar photovoltaics plants. The system works as follows: part of the power produced in the solar plant provides electricity to the grid while the rest is used to supply heat for calcination of calcium carbonate. After calcination, the products of the reaction – calcium oxide and carbon dioxide- are stored separately. When power production is required, the stored products are brought together in a carbonation reactor wherein the exothermic reaction releases energy for power production. The overall system is simulated to estimate the process behaviour and results show that storage efficiencies of ∼40% can be achieved. Moreover, an economic analysis is developed to compare the proposed system with batteries. Due to the low price of natural calcium oxide precursors, such as limestone, and the expected longer lifetime of equipment as compared to batteries, the Calcium-Looping process can be considered as a potential alternative for improving dispatchability in solar photovoltaic plants. [ABSTRACT FROM AUTHOR]

• Hydrogen storage systems enable flexible energy conversion and scheduling. • Hydrogen storage cost accounts for the largest proportion of system cost. • The hydrogen energy storage system has less demand for energy storage space. With global energy consumption increasing year by year, the industrial sectors of the world's countries have never been more urgent in achieving carbon reduction. Renewable energy plays a crucial role in the industrial decarbonization process. As the most mature renewable energy technology, wind and photovoltaic power generation have made significant progress in recent years. However, the intermittent characteristics hinder the efficient use of renewable energy. Existing research provides sufficient support for the flexible scheduling of large-scale renewable energy. Hence, this paper proposes a combined energy system composed of wind power-photovoltaic-energy storage salt cavern with hydrogen as the energy scheduling carrier. The system mainly realizes energy conversion through electrolytic water equipment and fuel cells. Then, Qianjiang City, Hubei Province, is taken as the analysis object, and the working conditions of each component in the system are optimized with the help of an improved particle swarm optimization algorithm. According to the results, the system's contribution to the energy system is discussed, and the system's economy and carbon reduction effect is studied. The analysis proves that the improved particle swarm optimization algorithm has a stronger solving ability. The combined energy system can effectively improve the economy and renewable energy utilization rate, meet the regional electricity demand, and significantly reduce carbon emissions. The economic analysis of the system shows that the operation and maintenance cost of hydrogen storage salt caverns accounts for the largest proportion of the total cost, about 60 %. Compared with several existing large-scale energy storage technologies, it is found that the energy efficiency of the whole system is only about 40 % due to the limitation of technology maturity. Nevertheless, the flexibility of the hydrogen storage system layout is relatively high. The required underground space volume is only equivalent to 1/6 and 1/2 of pumped storage and compressed air storage with the same scheduling capacity. The system will provide a theoretical support for the optimization of energy pattern and layout. [ABSTRACT FROM AUTHOR]

Abstract: The large band variation in the wind speed and unpredictable solar radiation causes remarkable fluctuations of output power in offshore wind and photovoltaic system respectively, which leads to large deviation in the system frequency. In this context, to minimize the deviation in frequency, this paper presents integration of different energy resources like offshore wind, photovoltaic (PV), fuel cell (FC) and diesel engine generator (DEG) along with the energy storage elements like flywheel energy storage system (FESS) and battery energy storage system (BESS). Further ultracapacitor (UC) as an alternative energy storage element and proportional–integral (PI) controller is addressed in order to achieve improvements in the deviation of frequency profiles. A comparative assessment of frequency deviation for different hybrid systems is also carried out in the presence of high-voltage direct current (HVDC) link and high-voltage alternating current (HVAC) line. Frequency deviation for different isolated hybrid systems are presented graphically as well as in terms of integral square error (ISE). Both qualitative and quantitative analysis reflects the improvements in frequency deviation profiles with use of ultracapacitor (UC) as energy storage element. [ABSTRACT FROM AUTHOR]