Search

Abstract: Low-grade energy sources such as geothermal energy, favorable ambient air and industrial waste heat etc. exist widely. Sufficient utilization of these low-grade energy sources may reduce our daily dependence on high-grade energy sources such as electricity resulting in reduced emission of green house gas for environmental conservation. Active pipe-embedded structure as floor/ceiling usually with water as the medium to carry heat or coolth may utilize these low-grade energy sources for providing space air-conditioning. Compact arrangement of pipes in the structure may significantly enlarge heat transfer surface between the slab mass and water in the pipe allowing substantial heat flows even for relatively small temperature differences. Application of the heat or coolth storage capacity of this structure for preheating or pre-cooling is also one among the advantages of this structure for shifting load and exploiting the nighttime cheap electricity tariff in some regions. This paper presents the technology of the active pipe-embedded structure for utilizing widely existing low-grade energy sources following by a comprehensive review on the heat transfer calculation models of this structure and its practical applications in real building systems for space air-conditioning. This review shows that more works on the active structure, especially simple and transient models for dynamic and accurate performance prediction and easy integration with existing building energy simulation packages, are worthwhile for further promoting the practical application wherever the low-grade energy sources are favorable. [ABSTRACT FROM AUTHOR]

This paper presents a method which combines the bilinear control technique with a set-point reset technique to control the space temperature when its cooling is provided by a GSHP equipped with an on/off capacity control, aiming to (i) improve the robustness of the space temperature control by taking account of load uncertainty; and (ii) to reduce the frequency of the GSHP on/off cycling by using the indoor space temperature set-point reset. When the GSHP is on, a smaller space temperature set point is used; while the GSHP is off, a larger set point is used. The proposed control was tested on a simulation platform, which consists of a ground source heat exchanger, a GSHP, an air-handling unit (AHU) and a middle-sized room. The test results show that the proposed control method is able to achieve a good control performance and has the potential to be applied to a real GSHP integrated air conditioning system to improve the robustness of space temperature control and simultaneously reduce the on/off frequency of the GSHP. [ABSTRACT FROM AUTHOR]