Search

• Building-level hybrid RE systems support net-zero development goals and climate change mitigation. • Energy planning is multi-dimensional, and is affected by uncertainties. • A life cycle thinking based fuzzy decision support model is presented for identifying optimal hybrid building energy mix. • A combinatorial multi-objective optimisation was adopted considering the most viable RE technologies in the local market. • Solar PV and geothermal heating are the optimal residential energy choices for BC, under the selected case study scenario. The increasing concerns about the environmental and economic impacts of conventional centralised energy generation and fossil fuel usage have prompted an interest in renewable-based decentralised energy systems. Implementing such systems at building level can facilitate the development of net-zero energy buildings. Energy system planning is a multi-faceted problem that involves technical, economic, environmental, and social dimensions, and affects multiple stakeholders at different levels. A multi-objective optimisation approach is needed to identify the optimal energy choices at building level, while paying attention to stakeholder priorities and other constraints. The objective of this study is to develop a model to identify the optimal mix of renewable energy (RE) while also accounting for uncertainties, which can be integrated at building level with life cycle thinking. A framework was proposed for planning an optimised hybrid RE system at building level to support the net-zero development goals. The optimisation model was developed considering the objectives of minimising energy system cost, maximising operational cost savings, minimising the life cycle environmental impacts, and maximising the RE fraction. A combinatorial optimisation approach was adopted to reflect the practical engineering aspects of energy planning problems based on technologies available in the market. The developed framework was demonstrated through a case study conducted for an average multi-unit residential buildings (MURB) located in British Columbia, Canada. The results indicated that under the defined stakeholder priorities and constraints, ground source heat pumps and solar photovoltaics (PV) are the optimal energy choices for MURB, and the optimal energy system combination supplied 44% of the building's energy demand through RE. The findings will inform and guide community developers and other stakeholders with an interest in residential buildings, on the most suitable clean energy options for their building project during the pre-project planning stage. [ABSTRACT FROM AUTHOR]

[Display omitted] • A total of 95 papers systematically reviewed cool material as a mitigation strategy for urban heat island (UHI). • Based on the type of reflection and the spectral range, the analysis found 7 material technologies (UV–Vis-NIR). • Optical properties such as reflectance (ρ), absorptance (α), and emittance (ε) are key factors in cool materials design. • Technological setbacks constitute a key limitation to scale cool material technologies and low-cost alternatives. • DRC and super cool materials represent the most efficient innovations amongst current technologies. The challenging urban expansion represents a pressing need to implement climate mitigation strategies for the urban heat island (UHI) effects and significant threats to the environmental quality, energy consumption, and human health. Thus, this manuscript systematically evaluates 95 relevant studies through a robust evidence-based analysis centered on the latest advances in cool materials, their potential, technological innovation, and global trends. The results showed studies in 21 countries, 81 cities, and 16 climate zones, of which the majority belong to Humid subtropical climates (Csa) including 29 % of studies, Oceanic climates (Cfb) with 15 %, and Mediterranean climates (Cfa) with 13 %. Spectrophotometry analysis is used in 48 % of the studies, while the most studied technologies are the Daytime Radiative Cooling (DRC); 22 %, followed by Thermochromics (TC); 19 %, Cool-Colored (CC); 17 %, Phase Change Materials (PCM); 17 %, Retroreflectives (RR); 11 %, Light-colored (LC); 5 % and Fluorescents (FL); 5 %. Finally, DRC reported the highest cooling power of up to 136 W/m2, however, the latest developments advocate for climate-dependent dynamic modulation techniques of Super Cool Materials (SCM) with Passive Daytime Radiative Cooling (PDRC) attributes and engineered spectral properties to dissipate urban heat to outer space in different meteorological conditions and wavelengths levels of the atmospheric window (8–13 μm). [ABSTRACT FROM AUTHOR]

Abstract The study aimed to identify diurnal indoor temperature patterns and quantify the impact of outdoor on indoor temperature as well as of other modifying factors. Indoor and outdoor temperatures of 77 houses in Brisbane, Australia were monitored with temperature sensors for one year (May 2017–2018). A linear mixed effect model predicted that on average, a 1°C increase in outdoor temperature resulted in a 0.41°C increase in indoor temperature during both the cool and warm seasons. The age of the house, building material, roof material and insulation had a moderate influence on indoor temperature. Queenslander houses (a stand-alone timber structure mounted on stumps with an extensive veranda) were, in general, cooler (0.5°C cooler in winter) and reactive (meaning, having a strong association with the outdoor temperature), while slab-on-ground houses were, in general, warmer (0.3°C) and stable (meaning, having less association with the outdoor temperature). From the indoor temperature patterns identified for the heated and cooled houses it was concluded that in this climate, heating and cooling is seldom done for 24 h. This quantitative information is crucial for understanding the influence of temperature on human health and household energy consumption at the time when climate change mitigation approaches are being discussed. [ABSTRACT FROM AUTHOR]

As the global population becomes more concentrated in urban environments, higher numbers of people will be exposed to urban air pollution. The environmental and human health benefits of green roofs are widely recognized. The aim of this paper is to promote green roofs as an effective passive technique for pollution mitigation and adaptation to climate change. During the heating season, the ambient concentrations of PM1, PM2.5, and PM10 were measured above a green roof and a reference roof on a school building, located in New Belgrade, the second-most populous municipality and business center of Serbia's largest city. The percent reduction of PM10, PM2.5 and PM1, in January 2020, above the green roof compared to the reference roof was 7%, 16.6%, and 17.6%, respectively. The results show that lightweight green roof improve air quality in terms of PM concentrations for all months considered. In this paper, correlation analysis and the use of Pearson's coefficient were used in the process of analysis to determine the relationship between PM10, PM2.5, PM1, and ambient parameters: relative humidity, ambient temperature, and wind speed. It was found that the statistical correlation expressed by the Pearson coefficient between all PM particles and wind speed was statistically significant in all observed months except September. Also, the degree of significance of the correlation between PM particles and humidity and temperature of ambient air varies by month. [ABSTRACT FROM AUTHOR]

In the face of a changing climate, a growing number of construction firms are adopting carbon reduction targets on individual projects and across their portfolios. In the wake of the Paris Agreement, some firms are seeking a means of aligning their targets with sectoral, national and international mitigation commitments. There are numerous ways by which such an alignment can be achieved, each requiring different assumptions. Using data from the UK construction industry, this paper reviews current company commitments and progress in carbon mitigation; analyses the unique challenges in aligning construction targets, and presents a series of possible sectoral decarbonisation trajectories. The results highlight the disparity between current company targets and the range of possible trajectories. It is clear that a cross-industry dialogue is urgently required to establish an appropriate response that delivers both a widely-accepted target trajectory and a plan for its delivery. This paper is intended to stimulate and support this necessary debate by illustrating the impact of different methodological assumptions and highlighting the critical features of an appropriate response. [ABSTRACT FROM AUTHOR]

Increasingly compact high density urban development in cities has allowed urban heat island effect to take root and increase the energy consumption of commercial buildings to cool its interior. Although the extensive use of glass façade has allowed these buildings to harness daylight to light up the building interior, it has also allowed substantial solar energy to enter and heat up the building. This is especially critical in hot and humid tropical regions, where reducing solar heat gain, while minimizing heat loss are equally important. The evaluation of glass performance is often conducted using active measurement, which make use of known radiant source. However, this type of setup cannot be applied for testing under non-controlled weather. Though a passive test procedure can be conducted under actual weather conditions using the outdoor test chamber, it is not suitable for a large-scale testing and fast on-site characterization. In addition, this test is limited to the fabricated glazing and thus could not predict potential issues in the design stage. Advances in simulation techniques have enabled building professionals to evaluate the glass façade of a building at the design phase. However, the typical simulation tools are unable to integrate the high performance glazing description, which is generated thanks to advances in coating technology, using the existing glass models. Furthermore, these tools are often lack of local weather models that plays an important role in accurately assess the solar heat gain admitted into the building. This paper provides useful information on different high performance glass façades and assesses their applicability for green building in a tropical country like Singapore. The research effort encompasses an improvement in the methodology used to predict solar irradiance through building glass that incorporates seamlessly the advanced glass models into the solar irradiance simulation. In addition, this will show how to effectively estimate the actual sky behavior via a measured data-based optimization process. A comparison of the simulation results with the measurements from an outdoor climatic test chamber under tropical climate will be performed. An assessment based on the typical glass performance metrics (e.g. U-value and Solar-Factor) together with measured energy savings obtained with the use of different high performance glass façade compared to clear float glass as a control will also be presented. [ABSTRACT FROM AUTHOR]

Solar heat shielding against solar radiation over the entire building envelope is one of the most effective measures for achieving air-conditioning energy savings and preventing heat-island phenomenon in warmer climate regions. For this purpose, we proposed a new heat-shielding film, which possesses a retro-reflective property and a wavelength-selection property, while having the same degree of transparency as that of transparent glass. The proposed film can be easily applied to a wide variety of buildings and architecture, including new and existing buildings. This film embodies an innovative heat-shielding technique that makes it possible to effectively return solar radiation toward the sky, while minimizing the secondary effects to other buildings, to the ground, and so on. In order to verify these effects, several aspects of quantitative evaluation are demonstrated. The measurement results and concepts in this paper are referred to from the previous conference paper Inoue et al. [10]. [ABSTRACT FROM AUTHOR]

This paper uses an example of an architect designed and occupied suburban house in the temperate climate of Perth, Western Australia to demonstrate how climatic design and low-technology active systems can deliver thermal comfort in average climatic conditions. However when thermal conditions are more extreme acceptable temperature ranges may not be met. Thermal monitoring in the house over eight days of extreme temperatures in summer and winter shows that acceptable temperature ranges may not be met in winter. During extreme winter conditions south facing rooms fall below comfort conditions by up to 3 K in the late night and early morning. The conclusion drawn is that in naturally ventilated buildings personal and psychological behavioral adaptation must go hand-in-hand with climatic design. This behavioral adaptation may become more important in the future if current climatic extremes become the new normal. [ABSTRACT FROM AUTHOR]

Average air temperatures in the Mediterranean region are in the thermal comfort zone for human beings in summer. However, irradiation conditions, construction technologies and subjective comfort expectations are dramatically increasing the cooling demand in buildings, exacerbated by the ambient temperature increase due to the climate change and the urban heat island phenomenon. This paper investigates the impact of the urban environment on the energy and thermal response of residential buildings, considering the case of the city of Rome, Italy. Ambient air temperature and relative humidity were continuously measured in four neighborhoods in 2015 and 2016. The monitored neighborhoods are characterized by: location in the urban area; construction materials for buildings and pavements; geometry of the urban texture. Data were also measured by a non-urban station, used as undisturbed reference. The climatic data were then used to calculate the thermal response of a typical Italian residential building, ideally located in the monitored areas of the city. Two envelope configurations were taken into account: with and without thermal insulation. Heat island intensities up to 8 °C was detected, with maximum monthly averages equal to 2 °C. The urban heat island increases the building cooling energy needs by 12% in the peripheral neighborhood and by up to 46% in the city center, respect to the undisturbed zone. For not cooled buildings, it was found out that the number of hours of thermal discomfort remains significant in urban buildings, despite the application of night ventilation strategies, while comfort conditions are mostly reached for buildings in the countryside. [ABSTRACT FROM AUTHOR]

The interpretation of the energetic signature of a city, taken as an integrated urban energy system, has been attempted in this study. Instead of the customary bottom-up approach, we successfully identified an average gray-box dynamic model by inversion of measured hourly system load and weather data. The third-order lumped-parameter thermal network model is derived by applying energy conservation principles to major nodes representing buildings, paved surfaces and urban canopy. This powerful data-driven approach offers deep insights into the thermo-physical properties of the built structures as well as the coupling of buildings and the urban microclimate. In particular, the Urban Heat Island (UHI) intensity has been determined to be close to 2 °C while the corresponding electricity cooling load penalty is 12%. [ABSTRACT FROM AUTHOR]

The paper presents an energy simulation-based study to investigate the impacts of climate change on energy consumptions of an office building located in five different cities, United States. Annual energy consumption of a medium-size office building was predicted by building energy simulation software—EnergyPlus using TMY3 weather data and future climate data. In this study, we have used two sets of further climate data with different climate models including (1) Hadley Centre Coupled Model, version 3 (HadCM3), and (2) NCAR Community Earth System Model version 1 (CESM1) with the Community Atmosphere Model version 5 (CAM5). A morphing method was applied to downscale the monthly weather forecast to hourly forecast for use in building energy simulation for the two General Circulation Models (GCMs): HadCM3 and CESM1. Using the generated future weather files, HVAC operation related mitigation measures including adjustment of thermostat setpoints, reduced HVAC operation hours, reduced VAV box minimum flow setting, and mixed-mode ventilation were simulated to compare with ASHRAE Standard 90.1 baseline simulated using TMY3 weather data. Simulation results on predicted whole building, heating and cooling energy consumptions were examined. The paper highlighted the importance of efficiently operating mechanical systems in buildings to ensure a more sustainable future. [ABSTRACT FROM AUTHOR]

Recently high reflective materials such as high reflectance paint for wall and solar control film or Low-E glass for window are utilized as a building façade aiming for reducing the cooling load of the buildings. From a view point of the direction of reflected rays, almost half of the energy goes upward due to diffuse reflection in case of paint, meanwhile most of energy goes down to the ground due to specular reflection by the glass. This leads to deterioration of thermal environment of surrounding buildings, and is one of causes of urban heat island. Retro-reflective façade materials are promising candidates for mitigation of urban heat island. The authors successfully developed a new type of transparent solar control window film Albeedo that selectively reflects near-infrared rays towards the sky. The film has a saw-tooth microstructure with a spectrally-selective reflection layer. This microstructure is able to reflect infra-red rays toward the sky. The upward reflectance of the film is measured by our custom made spectroscope. Firstly, the sample is placed in a large scale integrating sphere. Then, solar energy absorptive materials are arranged under the sample to absorb the transmitted component and positioned where the downward reflection goes to. Finally, a halogen lamp irradiates the sample at an incident angle of 60° as a light source. The result of the upward reflectance of near-infrared is about 33%. We also conducted field test measurements to evaluate the energy savings of the interior of the building and the degree of reflection of the exterior. [ABSTRACT FROM AUTHOR]

While UHI mitigation potential of cool roofs has been deeply investigated compared to cool façades, still not sufficient research effort has been dedicated to quantify the benefits of combined cool building products. The present work evaluates the thermal performance of an innovative cool roofing membrane and a cool façade painting applied on a prototype building. Moreover, an analytical procedure able to predict the cool coating thermal performance is elaborated. Such methodology can be used to determine the passive cooling potential of each product as a separate envelope component and as a combination. To this twofold aim, a preliminary in-field monitoring is developed. Therefore, a sensitivity analysis is performed to evaluate the separate and combined passive cooling contributions of the roof and the differently oriented façades. Finally, the analytical procedure is developed to define external surface temperature profiles able to predict the building coating thermal performance by minimizing the number of temperature measurements. Results show the major contribution of cool roof membrane in reducing indoor operative temperature. Nevertheless, a non-negligible cooling effect in terms of outdoor surface temperature is imputable to the South cool façade. Moreover, the analytical model shows an acceptable accuracy in representing the behavior of the building coating. [ABSTRACT FROM AUTHOR]

• Design criteria for active solar technologies integration in the historic built environment to favor energy transition, cleaner energy production, and climate mitigation. • Comparison of international guidelines' recommendations, design and assessment criteria. • Common glossary for the integration of active solar technologies in cultural heritage. • Definition of clear and updated design criteria valid for traditional and innovative active solar systems. • Support to solar innovation for the development of ad hoc products that considered correct design criteria. The paper focuses on architectural integration of active solar technologies (photovoltaic and solar thermal systems) in the historic built environment. Interpreted and used as a building material in the envelope, they are able to positively support energy transition and to contribute to climate change mitigation without compromising the original typological-functional characteristics. Their integration is fostered by innovative architectural design, aesthetical appeal, flexibility, multi-functionality, cost reduction, and technological development. Moreover, they can enhance economic value, functionality, and human comfort of buildings. Despite these advantages, there is a social diffidence on their acceptability due to policy, design, technical, economic and information barriers. To overcome these issues, the paper aims at identifying shared design criteria for their integration in the historic built environment, through a detailed assessment of 44 international guidelines. The study develops a taxonomy of international recommendations on energy efficiency, microgeneration, and solar integration, missing in literature so far, by analysing and comparing recurring criteria and recommendations. Also, a glossary of the most important terms according to the aesthetic, technical, and energy integration levels is created. Thus, the research defines an innovative framework of reliable design criteria, and a shared vocabulary to promote active solar technologies integration in the historic built environment. [ABSTRACT FROM AUTHOR]

Strict energy performance requirements have reduced the building's operational energy use and related environmental impact in the past decades. Consequently, the embodied impacts of buildings gained importance, and hence focussing on the life cycle impacts has become essential to further reduce the environmental impact of buildings. Life cycle assessment (LCA) is an internationally accepted method used for this purpose. Current LCA studies of buildings typically look at their whole life cycle but ignore potential changes in operational energy use due to climate change. However, the latter is expected to influence the operational energy use of buildings to a significant extent. This paper aims to improve the assessment of the operational phase by including variations in the yearly operational energy use caused by climate change and expected changes in the electricity mix as a strategy for climate change mitigation. This adapted dynamic assessment method is used to assess a Belgian office building. The results indicate that a Representative Concentration Pathway (RCP) 8.5 climate change scenario causes a decrease of 18 % for the end use of gas for heating and an increase of 32.4 % for the electricity use for cooling and ventilation. For the case study, the reduction of the environmental impact due to the decrease in gas use compensates the impact increase due to the higher electricity use. An increase in environmental impact in future would however occur if both heating and cooling are provided by electricity. Furthermore, depending on the changes that will occur in the electricity mix, the global warming potential of the office building will change by −13 % for an electricity mix dominated by renewables and by + 10 % for one with mainly production by gas compared to the situation with the current mix. However, the inclusion of a more extended list of environmental indicators shows that the overall environmental impact will only reduce by 4 % or even increase by 7 % compared to the situation with the current mix. [ABSTRACT FROM AUTHOR]

• We attained significant energy reduction potentials by energy-efficient renovations. • Large-scale implementation of heat pumps decreased the total delivered energy. • Energy savings ranged from 2 to 9% in 2030, 2–14% in 2040, and 2–19% in 2050. • Energy efficient building stocks alleviated the need for increased energy capacity. • New constructions should follow low-energy-use standards. A geo-referenced building stock model was used to analyse the energy and climate performance of the Knowledge Axis in Trondheim, Norway, by 2050. Strategies for energy upgrades, construction of more energy-efficient new constructions, changes in heating technologies, and their implications in terms of energy savings and greenhouse gas (GHG) emissions associated with energy and materials are assessed through various scenarios. Thematic maps were used to display the development of the total floor area and energy use. Compared to the baseline scenario for the same year, the energy savings range from 2 to 9%, 2–14%, and 2–19% in 2030, 2040, and 2050, respectively. New passive house constructions combined with energy upgrades in renovation projects and the maximum use of heat pumps have the greatest energy-saving potential. Our results displayed a large variation in the total net GHG emissions as a result of the alternative emission factors. The total net GHG emissions are primarily affected by the energy savings (amplified by assuming fossil fuel as the marginal mix), electricity mix (Norwegian or European), and allocation chosen for the incinerated waste to feed the district heating system. [ABSTRACT FROM AUTHOR]

The paper provides an overview of a part of research related to the analysis of information technologies and measures for improving the energy efficiency in urban planning that can contribute to mitigating the impact of climate change. The first part of the paper deals with problems supported by the numerous data on negative effects of climate change on the cities, such as urban heat islands, energy and ecological crisis. The second part of the paper proposes solutions that rely on information technologies which facilitate process of urban planning. Two projects related to the implementation of measures for improving the energy efficiency in urban planning were conducted within this research. The first one is considering the design of a spa centre in an undeveloped mountain landscape and the second one is dealing with reconstruction of a residential block in urban built environment. In the first case study, the proposed solutions rely on the information technologies, while in the second case study they rely on the implementation of measures for improving the energy efficiency in urban planning. The results show that the application of different measures in urban planning depends on the level of the built environment. [ABSTRACT FROM AUTHOR]

The intensification of the Urban Heat Island effect (UHI) is a problem that involves several fields, and new adequate solutions are required to mitigate its amplitude. The construction sector is strictly related with this phenomenon; in particular, roofs are the envelope components subject to the highest solar irradiance, hence any mitigation strategy should start from them and involve their appropriate design process. For this purpose, cool materials, i.e. materials which are able to reflect a large amount of solar radiation and avoid overheating of building surfaces have been deeply analyzed in the last years both at building and urban scales, showing their benefits especially in hot climates. However, green roofs also represent a possible way to cope with UHI, even if their design is not straightforward and requires taking into account many variables, strictly related with the local climatic conditions. In this context, the present paper proposes a comparison between cool roofs and green roofs for several Italian cities that are representative of different climatic conditions. In search of the most effective solution, the answers may be different depending on the perspective that leads the comparison, i.e. the need to reduce the energy consumption in buildings or the desire to minimize the contribution of the UHI effect. [ABSTRACT FROM AUTHOR]

• Relative and absolute home retrofit targets are reviewed and discussed. • Retrofit depth is determined by policy targets or practical cost-effectiveness. • Research studies find feasible energy savings of around 60% maximum. • Neighbourhood is optimal spatial scale to large-scale deliver home energy retrofit. • Future retrofits to be phased instead of one-off, and less primacy of fabric first. Home energy retrofit has been a publicly-funded policy in many countries since the 1990s. Government motivations have spanned from combating energy poverty to climate action and sustainability. Given the ambition of public policy, this paper reviews the targets, spatial scales and metrics used to deliver and evaluate home energy retrofit. Large-scale retrofit projects do differ: by spatial area, by retrofit depth and in evaluation metrics (if used). This review surveys first, the quantities of homes and inhabitants in intermediate spatial scales used to plan retrofit programmes. Second, the optimal spatial scale and retrofit depth to deliver large-scale home retrofit. Third, the quantitative metrics to evaluate retrofits, and future trends in occupant-based metrics. Neighbourhood is found to be the optimal spatial scale for home energy retrofit. Deep retrofit is described as 60% energy savings that, in synergy with energy supply decarbonisation, promises to deliver 80% or higher emission reductions. Recent evidence shows a shifting primacy from fabric-first retrofit to decarbonisation of heat generation and occupant health and well-being. [ABSTRACT FROM AUTHOR]

• A new methodology for energy use and peak load forecasting is developed. • Forecast of total energy use show a decrease between 2 and 11 TWh towards 2050. • Indicators for evaluating the difference between energy forecasts and statistics. • Large differences in how well forecasts predicted energy use towards 2020. • Calibration of energy use models on multiple years may improve energy forecasts. Projections of future energy use in buildings are a crucial tool in the tracking and attainment of political targets for energy efficiency and climate gas mitigation. In this article, a new methodology for projecting both the final energy use and the peak power demand for the Norwegian building stock is presented. The novelty of the methodology is to combine a set of existing, previously documented models in a novel way that integrates building stock models, hourly energy demand load profiles, and energy system modelling. The result is a coherent long-term projection of both annual and hourly energy use for different energy carriers, presented here with four scenarios of final energy use. The results show an expected decrease in total energy use for the Norwegian building stock between −2 and −12 TWh towards 2050, corresponding to a −3% to −14% of the energy use in 2020. Models for projecting future energy use are helpful both to evaluate the potential effects of current policies and to help reveal the need for new or updated policies. However, to have the desired effect, the projections must be as realistic as possible and reflect the actual development in energy use in the building stock. This necessitates a methodology for evaluating historical long-term annual energy use projections to understand why some models succeed in predicting energy use development while others fail. In this article, a set of indicators for evaluating the calibration of different models are presented. The indicators evaluate the initial difference and the divergence in the annualised trend for energy use projection models, compared to statistical data. The indicators are used to compare selected historical energy use projections for the Norwegian building stock against energy use from statistics from 2000 to 2020. The comparison shows large differences between the different projections, where calibrated scenarios show energy savings that tend to be more optimistic in the reference projection but more conservative in the best case potential. [ABSTRACT FROM AUTHOR]

[Display omitted] • High resolution data from a Dutch net zero energy neighborhood is analysed. • Most buildings are positive energy, emit less carbon than they offset. • Large occupant differences in energy demand are visible across the households. • Occupant preferences and weather conditions greatly influence thermal energy demand. • Due to the high thermal efficiency, there is a high risk for summer overheating. Decarbonizing the building stock is a central component of global climate change mitigation efforts. In practice, this decarbonization can be achieved by a variety of different measures, including improvements in building energy efficiency, electrification of energy demand to reduce reliance on fossil fuels, and installation of distributed (renewable) generation in conjunction with flexible storage. However, these large-scale, often disruptive changes to the built environment also raise a number of concerns, such as loss of occupant comfort exacerbated by climate change, and introduction of additional stressors on the distribution grid. In this paper, we demonstrate several conclusions using detailed sub-hourly data of two years (2019–2020) collected from 40 homes in a recently refurbished net-zero energy neighborhood in the Netherlands. This paper shows that, in renovation projects like the case study, net-zero energy balances should be considered on a neighborhood, rather than building level to minimize worst case planning by accounting for occupant influences and seasonal effects. Furthermore, the energy flexibility and climate resilience in the buildings seems to be rather limited, as a result of energy efficiency improvements. While helpful in climate change mitigation efforts, the large seasonal differences in energy demand and generation imply that this evolution is perhaps sub-optimal from the grid perspective. The results illustrate that all homes in the study were net-zero energy over the two year period, sometimes net positive by up to a factor of three. This led to considerable excess generation especially during the summer months. In addition, it was found that indoor air temperature sensors in a number of buildings showed overheating beyond guideline thermal comfort temperature of 25°C, showing potential thermal comfort and heat stress for vulnerable occupants. These results motivate energy storage or modifications of the installed heat pumps to leverage summer excess generation while reducing the impact of summer heat waves. These findings should enable the Netherlands and other countries aiming to fully decarbonize the building stock formulate better, future-proof policies. [ABSTRACT FROM AUTHOR]

Highlights: [•] Presents time series of embodied emissions in UK construction from 1997 to 2011. [•] Contends that mitigation requires greater focus on material efficiency. [•] Identifies barriers to uptake of alternative materials, technologies and practices. [ABSTRACT FROM AUTHOR]

[Display omitted] Sustainable Development Goal #7 calls for "access to affordable, reliable, sustainable and modern energy for all." Scientific evidence is growing that greenhouse-gas emissions have a noticeable effect on the earth's climate. Many purpose-built post-war social housing estates in Europe that form high-density residential-tower blocks, however, do not meet current stringent energy-efficiency standards. As a result, many of these structures are under threat of overheating and require careful planning to implement holistic energy subsidisation schemes. This article presents a setup of building energy performance framework that was developed according to the in-situ measurements of building-fabric thermal structure to asset robust energy performance evaluation and certification schemes in the residential sector. This empirical study examines social householders' electricity reliability in accordance with assessing overheating risk of housing stock in South-eastern Europe where the weather is subtropical (Csa) and partly semi-arid (Bsh). It also investigates the gap between as-designed and as-built energy performances. The findings for thermal anomalies resulted from air infiltration through the building fabric, and a lack of natural ventilation through living spaces and excessive heat gains through sizeable and glazed areas. On a typical hot summer day, the internal temperatures of the simulated condominiums remained high throughout the day and night, ranging from a minimum 28.5 °C to a maximum 36.5 °C. Insights from this empirical study improve the national energy network and subsidisation schemes in Europe. The energy policy and regulations would benefit from conceptual level analysis and planning prioritisation in accordance with the climate characteristics of each EU-27-member state. [ABSTRACT FROM AUTHOR]

Highlights: [•] We set up a methodology for adaptation and mitigation strategies of cities. [•] The methodology is based on a generalized residential building typology. [•] Assessing the mitigation potential by refurbishment according to regulations. [•] Estimating the vulnerability to wind storms of residential buildings. [•] A case study is implemented in Hungary. [Copyright &y& Elsevier]

Abstract: International agreements have led to an increase of national climate policies. The selection and analysis of policy instruments are mainly oriented at their technical effectiveness and financial feasibility while social sustainability plays a minor role. As a consequence, the impact of climate policies on individuals’ life situation is largely unknown even though the design of these policies suggests effects on national and international patterns of income inequality. Focusing on the residential sector, this paper investigates how national climate policy strategies affect the relationship between income and utility costs of households within nation states. It is argued that the effect of climate policy on income inequality depends on the specific design of these policies. Market-based solutions of energy efficient housing insulation, for example, focus more on effectiveness and less on social justice. In contrast, financial benefits from regulatory climate policies like eco-taxes on fuel can be configured as an instrument for income-redistribution. This paper sets a link between environmental politics and social justice research in a multi-level approach focusing on inequalities in housing utility costs among socio-economic groups. The analysis is based on EU SILC data which is combined with climate policy instruments in the field of housing. [Copyright &y& Elsevier]

Abstract: The human thermal sensation inside a semi-outdoor space enclosed by a semi-transparent pitched roof, located in Parma, north of Italy, is compared with the outdoor sensation under the same climate conditions. The assessment of the semi-outdoor setting was performed using the Physiological Effective Temperature (PET) thermal sensation index. With the aim of mitigating the semi-outdoor climate, some natural means were considered at the design stage, namely, the solar radiation absorptivity of the glass sheet roof, natural airflow, space thermal capacity and roof evaporative cooling. The dynamic thermal simulation of the semi-outdoor space was performed for three representative weeks of the months of January, March and July by accounting for the actual climate of the location. The results show that the semi-transparent roof can improve the human thermal sensation inside the semi-outdoor space with respect to that of the outdoor space. The results also demonstrate the effect of each design parameter on the PET index. [Copyright &y& Elsevier]

Abstract: Future trends of cooling load due to heat gain through the building envelopes in the residential sector in subtropical Hong Kong under different emissions scenarios in the 21st century were investigated. Predicted monthly weather data from five general circulation models were gathered and analysed. An increasing trend of building envelope cooling load was observed. The average annual cooling load during the 2009–2100 period would be 6.1% and 9.8% more than that during 1979–2008 for low and medium forcing, respectively. If only the last 30 years (2071–2100) were considered, the percentage increase would be much larger at 12.3% and 21.6%. Four mitigation or energy conservation measures – raising the indoor temperature, thermal insulation, double glazing and tinted glass – were considered. Among them, raising the indoor temperature has the best mitigation potential because there is a growing awareness and recognition of adaptive thermal comfort and it can be readily applied to both existing and new buildings at no extra cost. [ABSTRACT FROM AUTHOR]

Abstract: One of the cheapest ways to reduce CO2 emissions is thermal renovation of existing homes. Germany is a world leader in this project, with a strict building code, generous state subsidies, and an advanced renovation infrastructure. The effects of its policies are here explored in the light of progressive tightening of the building code, and the strict criteria for subsidies. Data on costs and outcomes of residential building renovations are presented from published reports on renovation projects, and cross-checked with projects investigated directly. Comparisons are made in terms of euros invested for every kilowatt hour of heating energy saved over the lifetime of the renovations, for standards ranging from 150kWh (the lowest standard) to 15kWh (the highest) of primary energy use per square metre of floor area per year. It is found that the lowest standard is an order of magnitude more cost-effective than the highest, in terms of both energy saved per euro invested, and return on investment over the lifetime of the renovations, regardless of fuel prices. It is argued that this throws into question Germany''s policy of progressively regulating for higher renovation standards, and offering subsidies only for projects that go beyond the minimum standard. [Copyright &y& Elsevier]

Abstract: In this study the life cycle primary energy use and carbon dioxide (CO2) emission of an eight-storey wood-framed apartment building are analyzed. All life cycle phases are included, including acquisition and processing of materials, on-site construction, building operation, demolition and materials disposal. The calculated primary energy use includes the entire energy system chains, and carbon flows are tracked including fossil fuel emissions, process emissions, carbon stocks in building materials, and avoided fossil emissions due to biofuel substitution. The results show that building operation uses the largest share of life cycle energy use, becoming increasingly dominant as the life span of the building increases. The type of heating system strongly influences the primary energy use and CO2 emission; a biomass-based system with cogeneration of district heat and electricity achieves low primary energy use and very low CO2 emissions. Using biomass residues from the wood products chain to substitute for fossil fuels significantly reduces net CO2 emission. Excluding household tap water and electricity, a negative life cycle net CO2 emission can be achieved due to the wood-based construction materials and biomass-based energy supply system. This study shows the importance of using a life cycle perspective when evaluating primary energy and climatic impacts of buildings. [Copyright &y& Elsevier]

In view of advancing global warming, climate change adaptation and mitigation measures for buildings are becoming increasingly important. The following article discusses the question of whether current urban planning principles still provide a suitable framework for this purpose. Therefore, the aim of this paper is to identify and quantify the main parameters of the urban planning framework regarding energy demand and energy generation of buildings. In a novel, holistic approach, passive design measures were evaluated in a joint analysis based on a case study in the city of Vienna (Austria) with respect to their impact on heating and cooling energy demand, overheating potential, daylight availability, and solar potential of new buildings. The results show that by improving the thermal insulation of the building envelope, the importance of a high compactness of the buildings to lower the heating energy demand is decreased. In addition, moderate compactness can help reduce the energy demand for space cooling and artificial lighting and increase the solar potential of the buildings. Accordingly, the results question the dogma of a high degree of compactness that still exists to some extent and indicate that changing climatic conditions also require new approaches in the urban planning process. [ABSTRACT FROM AUTHOR]

Abstract: The relations between building material competitiveness and economic instruments for mitigating climate change are explored in this bottom-up study. The effects of carbon and energy taxes on building material manufacturing cost and total building construction cost are modelled, analysing individual materials as well as comparing a wood-framed building to a reinforced concrete-framed building. The energy balances of producing construction materials made of wood, concrete, steel, and gypsum are described and quantified. For wood lumber, more usable energy is available as biomass residues than is consumed in the processing steps. The quantities of biofuels made available during the production of wood materials are calculated, and the cost differences between using these biofuels and using fossil fuels are shown under various tax regimes. The results indicate that higher energy and carbon taxation rates increase the economic competitiveness of wood construction materials. This is due to both the lower energy cost for material manufacture, and the increased economic value of biomass by-products used to replace fossil fuel. [Copyright &y& Elsevier]

[Display omitted] • The pre-use stage (construction) emissions of buildings occur in a short time. • Wooden buildings seem to emit less compared to concrete ones in pre-use stage according to LCA. • Green building certificates need to consider embodied emissions more exhaustively. The construction and use of buildings consume a significant proportion of global energy and natural resources. Leadership in Energy and Environmental Design (LEED) is arguably the most international green building certification system and attempts to take actions to limit energy use of buildings and construct them sustainably. While there has been a wide range of research mainly focused on energy use and emission production during the operation phase of LEED-certified buildings, research on embodied emissions is rare. The aim of this study is to evaluate the efficiency of LEED regarding initial (pre-use) embodied emissions using life cycle assessment (LCA). The study comprised several steps using a designed model. In the first step, three optional building material scenarios were defined (optimized concrete, hybrid concrete-wood, and wooden buildings) in addition to the base case concrete building located in Iceland. Second, an LCA was conducted for each scenario. Finally, the number of LEED points and the level of LEED certification was assessed for all studied scenarios. In addition, a comparison regarding embodied emissions consideration between LEED and Building Research Establishment Environmental Assessment Method (BREEAM) as mostly used green certificate was conducted in the discussion section. The LCA showed the lowest environmental impact for the wooden building followed by the hybrid concrete-wood building. In the LEED framework, wooden and hybrid scenarios obtained 14 and 8 points that were related to material selection. Among these points, only 3 (out of a total of 110 available points) were directly accredited to embodied emissions. The study recommends that the green building certificates increase the weight of sustainable construction materials since the significance of embodied emissions is substantially growing along with the current carbon neutrality goals. As most of the materials for building construction are imported into Iceland, this study is useful for locations similar to Iceland, while overall it is beneficial for the whole world regarding climate change mitigation. [ABSTRACT FROM AUTHOR]

• Methodology for determining the energetically optimal walls U-value was presented. • Importance of considering future energy consumption in design of buildings was shown. • Future-oriented design demonstrated a reduction of the insulation carbon footprint. • The importance of considering microclimatic features in the design of dwellings was shown. In the context of climate change, it is difficult to maintain the energy performance of houses, especially in countries with building codes that regulate the maximum allowed amount of energy that a building can consume. For this reason, there is a need for a review of building standards and adaptation to the context of energy performance in planning future projects. The objective of this research was to ascertain the thermal transmittance of external walls for single-family homes and to establish the energetically optimal thickness of thermal insulation by using an energy simulation to maintain heating energy consumption in conditions of climate change while following the state regulations in the Los Ríos region of Chile. It was demonstrated that for each time period and in each geographical location of the region the optimal U-value of the external walls is different. For a house to have a heating energy consumption corresponding to 90 kWh/m2/year, it must have an optimal average U-value of the walls of 0.49 ± 0.11 W/m2K (year 2006 in the study region); however, for the period 2035–2050, this value is expected to reach 0.78 ± 0.14 W/m2K. In addition, it was shown that designing the house with an energy performance perspective of 15 years helps to reduce the carbon footprint of the use of thermal insulation in the walls by 20%. The results obtained demonstrate the importance of considering the effects of future climate change in the housing design process in terms of both energy and environmental. [ABSTRACT FROM AUTHOR]

Applying enhanced insulation products to buildings can improve building energy performance, thereby reducing carbon emissions during operation and aiding in the mitigation of climate change. Vacuum insulation panels (VIPs) exhibit superior insulation performance than conventional insulating panels, but it is necessary to reduce the heat loss at the edge through the envelope material of VIPs and improve their weak constructability. In this study, infrared-dried core materials and metal-less films were developed and applied to improve the thermal performance of VIPs, and a VIP composite board was proposed to improve the constructability. The manufactured VIPs and VIP composite boards were experimentally and numerically analyzed to evaluate the effective thermal performance, considering heat loss at the edges and connections. The dry core improved the thermal conductivity of the center of the VIP by 25% compared to the wet core, and the metal-less film resulted in the greatest reduction in heat loss with respect to the edges and connections. The effective thermal conductivity of a 0.6 m × 0.6 m metal-less VIP with two connected metal-less VIPs is 3.4 mW/m K, including thermal bridges at edges and connections. The variation in the effective thermal conductivity of the VIP composite board according to its thickness and the effective thermal conductivity of the VIP provides a reference for manufacturing VIP composite boards that can suitable meet thermal performance requirements if also future aging studies would give good enough results. [ABSTRACT FROM AUTHOR]

• Establishes a comprehensive framework to explore the multiple-effects exerted by urbanization on future building carbon emissions. • Constructs a carbon emission dynamic scenario simulation model by combining the extended Kaya identity and Monte Carlo simulation. • The building sector will reach its peak at 3.09 (±0.36) Bt CO 2 in 2037 (±4). • Rural residential building sector will be the first to reach its energy and emission peak. • Economic urbanization and space urbanization exert major promoting effects on the peaking time and emission peaks of building carbon emissions. The accelerating urbanization has posed great challenges to China's carbon-mitigation efforts and global climate change response. However, how does the urbanization process impact the peak of future carbon emissions from buildings is still unclear. This study first establishes a comprehensive urbanization framework from three dimensions. Then, a dynamic scenario simulation model is innovatively constructed by combining the extended Kaya identity and Monte Carlo simulation approach to explore future dynamic evolution trajectory, possible peaks and peaking time of China's building carbon emissions from 2000 to 2050, considering the uncertainties of factors. Finally, dynamic sensitivity analysis is performed to investigate the contributions of different dimensions of the urbanization. Results show that under the business-as-usual scenario, the rural residential building sector will be the first to reach its energy peak in 2027. Dynamic scenario simulation shows that the building sector will peak at 3.09 (±0.36) Bt CO 2 in 2037 (±4). Specifically, the urban residential building sector will peak at 1.27 (±0.18) Bt CO 2 in 2040 (±4), while the rural residential building sector will peak at 0.51 (±0.03) Bt CO 2 in 2021 (±4) and the commercial building sector will peak in 2038 (±4) at 1.41 (±0.30) Bt CO 2. Dynamic sensitivity analysis indicates that rural–urban migration will exert promoting effect on the peaking time and emission peaks of building carbon emissions through the concomitant effects of the urbanization process, i.e., the economic urbanization and space urbanization. Overall, this study can provide a better insight into the impact of urbanization on carbon emission peak and can support governments and decision-makers to formulate effective carbon-mitigation strategies. [ABSTRACT FROM AUTHOR]

• Embodied energy and embodied carbon as a tool for climate change mitigation. • A keyword analysis regarding EE and EC was carried out. • Bibliometric analysis and literature maps were developed. • 1003 documents were found in the Scopus database for the 1981–2019 period. • Current building material research claims for EE and EC standardization. Climate change mitigation is a recurrent consciousness topic among society and policymakers. Actions are being adopted to face this crucial environmental challenge, with a rising concern with a big impact on the building sector. Construction materials have a high carbon footprint as well as an energy-intensive activity. To measure the environmental damage and effects, life cycle assessment (LCA) is the methodology most widespread. However, the LCA methodology itself and the assumptions done to carry it out leads to a generalized burden to compare the case studies outcomes. LCA method and for instance geographical location are incompatibilities also revealed in embodied energy and embodied carbon assessments. Urgent actions are needed to clarify the confusions arisen in the research, considering a detailed study on the embodied energy and embodied carbon values. From a material level point of view, this paper aims to illustrate the chronological overview of embodied energy and embodied carbon through keywords analysis. Moreover, to support and corroborate the analysis, an organized summary of the literature data is presented, reporting the range of embodied energy and embodied carbon values up to now. This systematic analysis evidences the lack of standardization and disagreement regarding the assessment of coefficients, database source, and boundary system used in the methodology assessment. [ABSTRACT FROM AUTHOR]

• A trans -scalar analysis of architectural issues relating to passive solar heating through glazing. • A global estimation of the potential for passive solar heating in Europe. • A multi-criteria comparative analysis of the efficiency of different types of glazing. • An investigation of the carbon and energy payback times according to the properties of glazing. • An economic analysis using a novel method based on the levelized cost of energy. Glazing transparency provides buildings with valuable solar energy during periods of colder weather, thus contributing to the mitigation of climate change. However, this same transparency also leads to heat loss which can offset heat gains. Although the use of insulated glazing addresses this challenge by multiplying the number of glass panes, at the same time it reduces the solar factor and thus the heating potential. This article aims to estimate the potential for passive solar heating in Europe according to the energy performance of glazing. This potential is undoubtedly a valuable resource for sustainable architecture. However, an analysis based on regional weather conditions shows a wide disparity in the energy savings that can be expected from a south-facing facade. These savings are most often well below a building's average energy consumption and so a balance has to be found between the thermal resistance and the solar factor of glazing. In addition, the carbon footprint and cost of the most efficient glazing can considerably extend the environmental and economic payback time of a retrofit. This research shows that the potential for passive solar heating is significant but only as long as each architectural situation is analysed according to its specific context and function. This potential would be even greater if windows were designed and used as adjustable facade elements to suit variations in weather and use. [ABSTRACT FROM AUTHOR]

• A retrofit selection strategy employing economic and environmental decision criteria was proposed. • Building energy retrofits were evaluated through a life cycle thinking approach. • Retrofits with operational emissions savings may not be beneficial when considering life cycle impacts. • Energy mix and the heating system of the house greatly impact the effectiveness. • Retrofit selection changes with stakeholder priorities on environment and economics. Improving the energy performance of buildings has been a much-discussed topic over the past few decades. With the current focus on climate change mitigation, emissions reduction has also come to the forefront of this discussion. Retrofitting is an option to improve the energy and emissions performance of buildings. However, in the residential building stock, retrofit planning for existing buildings faces many complexities due to variations in climatic conditions and macro-environment as well as the presence of multiple stakeholder groups. Thus, in identifying solutions, it is necessary to take a holistic perspective that covers these different dimensions. In this paper, commonly used building energy retrofits were evaluated through a life cycle thinking approach. The performance of various retrofit options applicable for single family detached housing were evaluated using the HOT2000 energy simulation software package under the varying climatic conditions and energy supply scenarios across Canada. The retrofits were evaluated in terms of the additional investment, energy use and cost reduction achieved over the life cycle, and life cycle emissions reduction. The findings indicate that the provincial energy mix and the heating system of the house (i.e. electric or natural gas) play a major role in determining the effectiveness of a retrofit, and this "effectiveness" changes at different stakeholder levels. However, not all retrofits that reduce emissions make economic sense and vice versa when life cycle thinking comes into play. The findings will be useful for building owners and occupants as well as for policy developers and other decision makers interested in demand side management. [ABSTRACT FROM AUTHOR]

The building industry is expanding its ability to mitigate the environmental impacts of buildings through the application of life cycle assessment (LCA). Most building LCA studies focus on core and shell (C&S) and rarely assess mechanical, electrical, and plumbing (MEP) and tenant improvements (TI). However, C&S typologies in the commercial sector pose particular challenges to achieving net zero carbon due to the numerous renovations these building undergo through during their service life. MEP and TI are installed multiple times over the lifetime of commercial buildings leading to cumulative environmental impact caused by increasing material quantities and embodied carbon (EC). This study aimed to establish a preliminary range of material quantities and embodied carbon impacts for MEP and TI components, focusing on commercial office buildings in the Pacific Northwest. The first research stage involved quantifying material quantities while a second stage aimed to calculate Embodied Carbon Coefficients (ECC) and LCA impacts using different data sources. The embodied carbon estimates ranged from 40 to 75 kg CO 2 e/m2 for MEP and 45–135 kg CO 2 e/m2 for TI. However, with recurring instalments during a life span of 60 years the impacts become comparable to known impacts of core and shell systems. [ABSTRACT FROM AUTHOR]

• Halocarbon emissions in the building sector is increasing. • Non-Annex parties become bigger emitter instead of Annex parties. • Building sector accounts for more than half of global HFCs emissions. • Data sufficiency is key barrier for policy making. • Building cooling demand increase will push further halocarbon emissions. Estimates of the non-CO 2 greenhouse gas (GHG) emissions contributed by the buildings sector are necessary to evaluate this sector's potential for climate change mitigation. As data is lacking on fluorinated gases (F-gases) and hydrofluorocarbon (HFC) emissions from the buildings sector, this study aimed to estimate these emissions. First, the share of total global GHG emissions represented by buildings-sector emissions was estimated. Then, the HFC emissions of the buildings sectors in several countries (USA, EU, Japan, and China) are compiled. Next, based on necessary assumptions, global buildings-sector HFC emissions were estimated. Finally, this paper discusses implications for policy-makers. [ABSTRACT FROM AUTHOR]

• The climatic mitigation potential of façade is assessed for four different climates. • The impact of facade and ground properties on T mrt is assessed. • A novel Ladybug workflow which couples indoor and outdoor is validated. Within the bounds of climate change, the design of public spaces and buildings must contribute to the local thermal mitigation. In this context, there has been a considerable body of research emphasis on reducing the Urban Heat Island (UHI) phenomenon via the resurfacing of public spaces, streets and roofs, with vegetation and cool materials. At the time of writing, minor attention has been given to how buildings' façades could affect outdoor temperature ranges. Whereas facades are studied according to their capabilities of reducing building energy demand and grant indoor comfort, but scarce attention has been given to how their surfaces properties are affecting local microclimates. The proposed work thus assesses the thermal mitigation potential of façades properties such as windows to wall ratios and finishes attribute, such as reflectivity and emissivity. The study, starting from the definition and calibration of a Ladybug Tools' simulation workflow for the assessment of outdoor comfort conditions, simulates urban canyons located in three climate types (temperate warm, temperate cold, and tropical arid), parametrises façade types, along with canyon aspect ratios and ground thermal properties. By creating a hierarchy of importance of interventions between aspect ratios, ground and façade finishes, the work offers information useful to foster site-specific climate mitigation plans. [ABSTRACT FROM AUTHOR]

• Energy renovation has a central role in the Croatian plan of climate change mitigation. • Almost 600 buildings with 16,400 apartments were renovated in Croatia in four years. • Renovations induce 32 jobs in Croatian economy per 1 million EUR of investments. • Total economic effects are 3 times higher than initial direct effects of investments. • Energy renovation reduces energy import dependency of the Croatian economy. The aim of this paper is to gain new knowledge on contributions of energy renovation of multi apartment buildings to economy and climate changes. The research methodology is based on applying the input–output model, which enables the analysis of direct, indirect and induced effects. The analysis was conducted on the sample of the Republic of Croatia. The reference research period is from 2017 to 2020. The results obtained confirm the existence of indirect socioeconomic effects of energy recovery projects which were justified by being co-funded from national budgets or EU structural funds. The growth induced by gross value added and employment positively effects the revenue from taxes and contributions, and by co-financing energy renovations they do not disturb the stability of public finances. The energy renovation of multi apartment buildings increases the energy sufficiency of the domestic economy due to the fact that the need for imported energy decreases throughout the entire life of the investment. A decrease in import dependency decreases the sensitivity of the economy from possible negative effects of the disorder on the world market of energy products. The obtained results show positive effects of energy renovation of multi apartment buildings on climate changes, primarily through the decrease of the amount of energy consumption in an energy renovated area and the decrease of harmful particle emission (CO 2). [ABSTRACT FROM AUTHOR]

• Systematic review of the technological options to achieve zero energy buildings. • Relevant literature published was critically assessed. • With appropriate design, buildings can contribute to climate change mitigation. • Decreasing the embodied energy in the materials used in their construction. • Decreasing the energy demand and use during their operation phase. A systematic review of the technological options and strategies to achieve zero energy buildings was carried out to establish today state-of-the-art knowledge base and to present key design and performance factors that define those technologies with the final aim of contributing to climate change mitigation options of buildings. All relevant literature published from January 2013 to August 2019 was critically assessed. A total of 14,895 papers were identified and 220 reviews were evaluated as first literature source; this literature showed that the published information is diverse and not organized, therefore climates and building typologies is not possible solely through published information. Collected evidence shows that with appropriate design, buildings can contribute to climate change mitigation decreasing the embodied energy in the materials used in their construction and decreasing the energy demand and use during their operation phase. [ABSTRACT FROM AUTHOR]

Urban overheating affects the energy, health, power, survivability and environmental quality of cities. We calculated the magnitude of overheating in Sydney, Australia, at close to 9 °C, which causes a cooling penalty of up to 16% and an increase in the indoor overheating levels of up to 56%. We developed and evaluated eight heat mitigation scenarios based on the use of reflective surfaces, additional greenery, an increase in the evapotranspiration rate and several combinations of these factors. We estimated that mitigation can decrease the peak ambient temperature by up to 2.9 °C, reduce the maximum annual cooling consumption by up to 1.5 TWh, decrease the CO2 emissions by as much as 1.21 MT CO 2 , reduce indoor overheating by up to 80%, decrease the heat-related morbidity by 1.07–1.49, and decrease the heat-related mortality anomaly by as much as 1.39 per 100,000 citizens. We estimated the associated water penalty range to be between 80 and 100 Gl/year or between 13 and 16.7% of the water consumption in Sydney. [ABSTRACT FROM AUTHOR]