Search

[Display omitted] • The LCA methods and findings of 41 papers on air-conditioning systems are examined. • Retrieved studies presented discrepancies in the LCA goals and scope definition. • The global warming potential (GWP) was the most evaluated indicator across papers. • Grid-connected electrical heat pumps generally had a higher life cycle GWP. • Improvements related to AC energy sources and other life cycle aspects are proposed. Air conditioning (AC) has become the fastest-growing energy end-use in buildings worldwide, and its adoption is expected to increase further due to various socioeconomic factors and climate change. Despite this, the decarbonization of space cooling is progressing slowly; hence, the emissions burden at each stage should be examined in detail. Given this context, it is crucial to assess the environmental performance of AC systems by considering a comprehensive approach like the Life Cycle Assessment (LCA). While several studies have already targeted the LCA of AC systems, a clear overview of those studies' methodologies, assumptions, and results is still lacking. Therefore, this systematic review examined the methods and key findings of 41 peer-reviewed articles. Although the results revealed discrepancies among the goals and scope, impact assessment methods, and indicators, most articles predominantly focused on the global warming potential (GWP) impact, and its reported quantification was further analyzed. It was observed that grid-connected vapor-compression heat pumps/chillers (conventional systems) presented higher GWP impacts than other AC systems powered by renewables, which in contrast, exhibited higher impacts in some toxicity and resource depletion-related indicators. However, the share of GWP showed different distributions, as the pre-operation emissions of solar-powered AC systems (either PV or thermal) were higher than those of conventional systems, mainly driven by reduced energy consumption usage. This review concludes with some recommendations for each stage of the life cycle. Since the operation phase generally showed the highest impact, more efforts should be devoted to accelerating the transition to a 100% clean electricity power system at a national scale. In contrast, the need to power AC systems with on-site renewables should be carefully assessed based on the context. [ABSTRACT FROM AUTHOR]

• Energy Communities analysis and review in Europe and, more specifically, in Spain. • Promoting energy poverty reduction and cooperation through Energy Communities. • Real case study focused on reducing energy poverty in the city of Getafe (Spain). • Selection of public buildings to implement energy community in two neighborhoods. • Significant electricity bill reductions for energy poverty households. Advancements in renewable energy technologies, a growing awareness of the need for sustainable energy solutions, and the emergence of new business models in the energy sector, have contributed to the growth of Energy Communities. Public entities can find in energy communities today an opportunity to tackle energy poverty, to increase the cooperation among citizens and to empower them to be a more active player within the energy sector. This paper analyzes energy communities in Europe and focuses specifically on Spain; considering the three beneficial aspects previously mentioned. It aims to obtain ground truth about the applications of these new citizens' arrangements. A citizen-led initiative at the city of Getafe (Madrid, Spain) is included and discussed in detail. This case study focused on reducing energy poverty of its participants. An energy community was designed and implemented as a collective PV solar self-consumption infrastructure. The roofs of various public buildings in the two case study neighborhoods were selected for locating the PV installations. Real metered data were used to evaluate the solution. A public building was selected for the energy community, considering generation on roof and dwellings proximity. The results provided that out of the 77% PV generations could be used to contribute to the demand of 100 residences; while the resulting 23% would provide approximately 60% of the energy demand of the public building. The setting up of the Energy Community not only had the technical part but also included workshops seminars and information sessions, to ensure that people prone to benefit and maximize its impact. [ABSTRACT FROM AUTHOR]

• Design criteria for active solar technologies integration in the historic built environment to favor energy transition, cleaner energy production, and climate mitigation. • Comparison of international guidelines' recommendations, design and assessment criteria. • Common glossary for the integration of active solar technologies in cultural heritage. • Definition of clear and updated design criteria valid for traditional and innovative active solar systems. • Support to solar innovation for the development of ad hoc products that considered correct design criteria. The paper focuses on architectural integration of active solar technologies (photovoltaic and solar thermal systems) in the historic built environment. Interpreted and used as a building material in the envelope, they are able to positively support energy transition and to contribute to climate change mitigation without compromising the original typological-functional characteristics. Their integration is fostered by innovative architectural design, aesthetical appeal, flexibility, multi-functionality, cost reduction, and technological development. Moreover, they can enhance economic value, functionality, and human comfort of buildings. Despite these advantages, there is a social diffidence on their acceptability due to policy, design, technical, economic and information barriers. To overcome these issues, the paper aims at identifying shared design criteria for their integration in the historic built environment, through a detailed assessment of 44 international guidelines. The study develops a taxonomy of international recommendations on energy efficiency, microgeneration, and solar integration, missing in literature so far, by analysing and comparing recurring criteria and recommendations. Also, a glossary of the most important terms according to the aesthetic, technical, and energy integration levels is created. Thus, the research defines an innovative framework of reliable design criteria, and a shared vocabulary to promote active solar technologies integration in the historic built environment. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) façade on building envelope in an urban area can potentially produce clean electricity to meet the energy demand of the buildings and also provide weather protection. In order to assess the potential of PV application on building façade, energy generated and cost related to the PV installation, it must be analysed during the design process so that it can provide enough information to the designer, investor, and end user to make a decision in implementing renewable technologies. This paper focus on performance and financial evaluation using System Advisor Model (SAM) developed by National Renewable Energy Laboratory (NREL) to evaluate the potential of vertical photovoltaic façade system on a high-rise building in Malaysia based on 5 possible design scenario using Heterojunction Intrinsic Thin-film module (HIT-Si) with the nominal efficiency of 15.6%. The annual energy generated through the vertical photovoltaic system is between 400–700 MWh meanwhile roof system generate about 240MWh annually. The payback period for the vertical photovoltaic system in Malaysia is about 12 years. Although the installation of photovoltaic vertical façade in the tropical region can be quite challenging especially in urban area, but with proper studies and carefully design approach, its can open new opportunities in Malaysian built environment. [ABSTRACT FROM AUTHOR]