Search

The use of a battery energy-stored quasi-Z-source inverter (BES-qZSI) for large-scale PV power plants exhibits promising features due to the combination of qZSI and battery as energy storage system, such as single-stage power conversion (without additional DC/DC boost converter), improvements in the output waveform quality (due to the elimination of switching dead time), and continuous and smooth delivery of energy to the grid (through the battery energy storage system). This paper presents a new simplified model of a BES-qZSI to represent the converter dynamics with sufficient accuracy while using a less complex model than the detailed model (including the modelling of all switches and switching pulses). It is based on averaged values of the variables, voltage/current sources, and the same control circuit than the detailed model, except for the switching pulses generation. The simplified model enables faster time-domain simulation and is useful for control design and dynamic analysis purposes. Additionally, an energy management system has been developed to govern the power supply to grid under two possible scenarios: 1) System operator command following; or 2) economic dispatch of the stored energy. The results obtained from simulations and experimental hardware-in-the-loop (HIL) setup for different operating conditions of the grid-connected large-scale PV power plant with battery energy storage under study demonstrate the validity of the proposed simplified model to represent the dynamics of the converter and PV power plant for steady-state stability studies, long-term simulations, or large electric power systems.

In a developing world where the demand for energy increases every day, the use of hybrid systems is a viable and important solution. The rivers present a significant potential for the electrical generation from the hydrokinetic use of the river currents, as well as the use of the solar radiation by means of the generation of photovoltaic solar energy for the electrical supply in rural areas. This paper presents a combination of both forms of electricity generation, photovoltaic generators and river turbine, to configure a hybrid system together with a subsystem of support based on hydrogen and batteries to guarantee the electrical supply of a set of isolated loads. The complete design of a hybrid system satisfies the energy requirements of a load. The methodology includes the optimal location of the turbine in a cross section of the river to maximize the performance of the hydroelectric generator, and the techno-economic study of all components of the hybrid system for an efficient use of renewable energy resources. The results show that the hybrid system provides the power demanded by the loads, hydroelectric and solar photovoltaic generation are optimized, and the battery storage subsystem loading status is kept avoiding deep discharges.

Electric vehicles are the most promising sustainable transport technology for solving problems linked to the internal combustion engine vehicles. Wireless charging reduce the main problems associated with electric vehicles, driving range, charging time and size and cost of the battery. Inductive power transfer is the most promising technology for dynamic wireless charging of electric vehicles, which can be used to supply the motors and charge the battery while moving. This paper presents a comparative study of a dynamic wireless power transfer system for charging electric vehicles driving on three stretches of traffic road (motorway, highway and urban stretch) in Cadiz (Spain). The study analyses the electricity consumption demanded by the dynamic wireless power transfer system and the battery state-of-charge of the electric vehicles that travel the stretch to evaluate the increase of autonomy, the length of the stretch or speed of the vehicle for achieving a specific increase of state-of-charge. The results show a great dependence on stretch of road, with large fluctuations in the urban stretch and more stability in the highway and motorway. This study could help to design stretches of roads with dynamic wireless power transfer and to quantify the power and energy demanded by the system.

Although electric vehicles (EVs) are experiencing a considerable upsurge, the technology associated with them is still under development. This study focused on the control and operation of a medium-voltage direct-current (MVDC) microgrid with an innovative decentralized control system, which was used as a fast charging station (FCS) for EVs. The FCS was composed of a photovoltaic (PV) system, a Li-ion battery energy storage system (BESS), two 48 kW fast charging units for EVs, and a connection to the local grid. With this configuration and thanks to its decentralized control, the FCS was able to work as a stand-alone system most of the time though with occasional grid support. This paper presents a new decentralized energy management system (EMS) with two options to control the power sources of the FCS. The choice of the power source depends on the MVDC bus voltage, the state-of-charge (SOC) of the BESS, and the control option of the EMS. This control was tested by simulating the FCS, when connected to several EVs and under different sun irradiance conditions. Simulation results showed that the FCS operated smoothly and effectively, which confirms the feasibility of using this technology in EVs.

Solar energy has been consolidated as one of the main renewable energy sources capable of contributing to supply global energy demand. However, the solar resource has intermittent feature in electricity production, making it difficult to manage the electrical system. Hence, we propose the application of Deep Learning (DL), one of the emerging themes in the field of Artificial Intelligence (AI), as a solar predictor. To attest its capacity, the technique is compared with other consolidated solar forecasting strategies such as Multilayer Perceptron, Radial Base Function and Support Vector Regression. Additionally, integration of AI methods in a new adaptive topology based on the Portfolio Theory (PT) is proposed hereby to improve solar forecasts. PT takes advantage of diversified forecast assets: when one of the assets shows prediction errors, these are offset by another asset. After testing with data from Spain and Brazil, results show that the Mean Absolute Percentage Error (MAPE) for predictions using DL is 6.89% and for the proposed integration (called PrevPT) is 5.36% concerning data from Spain. For the data from Brazil, MAPE for predictions using DL is 6.08% and 4.52% for PrevPT. In both cases, DL and PrevPT results are better than the other techniques being used.

Integrating energy storage systems (ESS) with wind turbines results to be an interesting option for improving the grid integration capability of wind energy. This paper presents and evaluates a wind hybrid system consisting of a 1.5 MW doubly-fed induction generator (DFIG) wind turbine and double battery-ultracapacitor ESS. Commercially available components are used in this wind hybrid system. A novel supervisory control system (SCS) is designed and implemented, which is responsible for setting the active and reactive power references for each component of the hybrid system. A fuzzy logic controller, taking into account the grid demand, power generation prediction, actual DFIG power generation and state-of-charge (SOC) of the ESSs, sets the active power references. The reactive power references are proportionally delivered to each element regarding their current limitations in the SCS. The appropriate control of the power converters allows each power source to achieve the operation defined by the SCS. The wind hybrid system and SCS are assessed by simulation under wind fluctuations, grid demand changes, and grid disturbances. Results show an improved performance in the overall response of the system with the implementation of the SCS.

This paper presents a “full green” version of a rubber tyre gantry (RTG) crane with a fuel cell (FC) unit and supercapacitors (SCs) as energy storage system (ESS), instead of using the conventional RTG powered by a diesel engine. The SCs provide the required high current peaks and power demands when accelerating the load in the hoisting-up movement. Once the power demand reaches a steady level (hoist up constant speed), the FC provides the energy needed for the rest of the movements. The SCs are also charged when the hoist down movement is taking place. In this case, the regenerative energy can be stored in the SCs instead of being burnt in the braking resistors as in the conventional RTG crane. The new hybrid powertrain based on FC and SCs is designed and evaluated from the real driving cycle of the RTG crane. Simulation results, which include a comparative study with the current configuration of the RTG crane (powered only by diesel engine), demonstrate the technical viability of the RTG crane powered by FC and SCs. This hybrid powertrain is more expensive than the diesel powertrain, but more energy-efficient, and a better solution from the environmental point of view.

As a result of the increasing wind power penetration on power systems, the wind farms are today required to participate actively in grid operation by an appropriate generation control. This paper presents a comparative study on the performance of three control strategies for DFIG wind turbines. The study focuses on the regulation of the active and reactive power to a set point ordered by the wind farm control system. Two of them (control systems 1 and 2) are based on existing strategies, whereas the third control system (control system 3) presents a novel control strategy, which is actually a variation of the control system 2. The control strategies are evaluated through simulations of DFIG wind turbines, under normal operating conditions, integrated in a wind farm with centralized control system controlling the wind farm generation at the connection point and computing the power reference for each wind turbine according to a proportional distribution of the available power. The three control systems present similar performance when they operate with power optimization and power limitation strategies. However, the control system 3 with down power regulation presents a better response with respect to the reactive power production, achieving a higher available reactive power as compared with the other two. This is a very important aspect to maintain an appropriate voltage control at the wind farm bus.