Search

The rapid global economic development over the past two decades has been accompanied by rising energy demand and CO 2 emission rates. Understanding the driving forces of CO 2 emissions is necessary for future energy planning and policy formulation. This paper examines the driving factors behind the increase in CO 2 emissions in Malaysia with special focus on the manufacturing, electricity and transportation sectors. The paper extends the Kaya identity by incorporating energy mix, investment efficiency, capital-labor substitution, population-to-employment, urbanization rates, and per capita CO 2 , along with the standard variables including economic activity, economic structure, and energy intensity. The paper also evaluates if any macroeconomic instability (economic crisis) in the country has led to reduction in emission rates. The study utilizes the latest country data, covering the period 2002–2016. The result shows that, while economic activity is always associated with CO 2 emissions, more efficient energy use would help restrain the rise in emission rates without hampering economic growth regardless of economic structure. Emission reduction targets in Malaysia should be reinforced with an appropriate economic restructuring that restrains the economic structure effect. Due to the extensive energy use in the transportation and electricity generation, future emission control should focus more on these sectors. • The paper identifies the factors affecting CO 2 emissions, considering the economic, technical, and social aspects. • The study investigates whether the economic downturn induces further emission control. • Results indicate economic activities and urbanization process are the main driving factors. • Energy efficiency, renewable energy use, and capital-labor substitution should be strengthened. [ABSTRACT FROM AUTHOR]

Insight on how industrial's practices and commitments could affect better energy-efficient buildings implementation is still limited despite the emerging concerns over the demand to minimize energy consumption. This study aims to fill the gap by investigating industry behaviours and practices and recommending holistic energy-efficient management strategies in Malaysia. The study used an explanatory sequential mixed approach comprising 4 case studies of conventional buildings, 72 building stakeholders submitted a survey questionnaire, and 7 experts were interviewed to enable triangulation of information. The analysis revealed that current energy management strategies are based on low-hanging fruit measures. The results also suggest that financial, managerial, and knowledge limitations are the primary constraints to effectual energy-saving methods. This paper demonstrates three-tier intervention strategies in education, policy, and technology towards accelerating industry transition in achieving best practices in energy-efficient buildings. The outcomes of this study may advantage building interested parties in addressing relevant barriers to energy-efficient execution and designing effective efforts to encourage conventional building for the building advancement in Malaysia. This research offers findings by delivering greater practical perspectives on the extent of industry practises and behaviours regarding energy-efficient building implementation, including by presenting energy management approaches for benchmarks in energy-efficient buildings in Malaysia. • Financial, managerial and knowledge are the constraints to effectual energy-saving. • Intervention in education, policy and technology are the strategies for energy-saving. • Low-hanging fruit measures effective for simple behavioural changes. [ABSTRACT FROM AUTHOR]

This paper investigates the causal relationship between energy consumption and economic productivity in Malaysia at both aggregated and disaggregated levels. The investigation utilises total and sectoral (industrial and manufacturing) productivity growth during the 1971–2012 period using the modified Granger causality test proposed by Toda and Yamamoto [1] within a multivariate framework. The economy of Malaysia was found to be energy dependent at aggregated and disaggregated levels of national and sectoral economic growth. However, at disaggregate level, inefficient energy use is particularly identified with electricity and coal consumption patterns and their Granger caused negative effects upon GDP (Gross Domestic Product) and manufacturing growth. These findings suggest that policies should focus more on improving energy efficiency and energy saving. Furthermore, since emissions are found to have a close relationship to economic output at national and sectoral levels green technologies are of a highest necessity. [ABSTRACT FROM AUTHOR]

As the energy demand keeps growing with the world's increasing population, concerns have arisen about the carbon emissions that contribute to critical environmental issues. These environmental concerns drive many nations to commit themselves in pursuing sustainable energy resources. Different process integration techniques have been developed to achieve a viable energy planning sector. In reference to the literature review, the use of time-sliced based models in optimization problems is still sparse. Hence, this paper aims to develop a time-sliced based optimization model that can be integrated into energy integration models. With that, a multi-period pinch-based methodology (targeting, scheduling, and optimization) for electric power systems with the hybridization of renewables and fossil-based energy is proposed. The prospective framework is designed to meet the emissions limit, fulfil energy demand, and minimize the electricity bill. An illustrative case study in Malaysia incorporated with an actual billing system is used to demonstrate the effectiveness of the proposed framework. The results show that it is capable of reducing the total electricity bill by 35% and achieving a 71% reduction of emissions by using solar PV as the renewables. • Three-step multi-period pinch-based methodology for energy planning is presented. • The model incorporates an actual billing system. • Time-sliced based optimization model is developed in the proposed framework. • Optimal emission reduction ratio and storage size are identified as 0.71 and 236 kWh. • The total electricity bill can be further reduced by 35%. [ABSTRACT FROM AUTHOR]

Abstract: Currently, the main crop for biodiesel in Malaysia is palm oil. Recently, Jatropha curcas has drawn the attention of the Malaysian Government. This paper aims to study the feasibility of Jatropha as a potential biodiesel feedstock for Malaysia. Physico-chemical properties of Jatropha biodiesel and its blends with diesel followed by engine performance and emissions characteristics of B10, B20 and B0 were studied. The results show that viscosities of B10 and B20 are closer to diesel. Moreover, only the oxidation stability of B10 and B20 meet the European specifications (EN 590) of 20 h. Therefore, only B10 and B20 have been used to evaluate engine performance and emission. Compared to B0, the average reduction in brake power (BP) is 4.67% for B10 and 8.86% for B20. It was observed that brake specific fuel consumption (BSFC) increases as the percentage of biodiesel increase. Compared to B0, a reduction in hydrocarbon (HC) emission of 3.84% and 10.25% and carbon monoxide (CO) emission of 16% and 25% was reported using B10 and B20. However, the blends give higher nitrogen oxides (NO x ) emission of 3% and 6% using B10 and B20. As a conclusion, B10 and B20 can be used in a diesel engine without any modifications. [Copyright &y& Elsevier]

Abstract: This paper describes the synthesis of a rubber seed supply network to support the green energy demand in Malaysia. An optimised rubber seed supply network design, which maximises biomass utilisation, secures local biomass supply as well as reduces material loss and emissions resulted from inefficient logistic activities has been carried out. The utilisation of rubber seed oil (RSO) for biofuel production in Malaysia and its contribution to the national biomass renewable energy portion is forecasted. The supply network of the biomass is synthesised through mixed integer linear programming. Both centralised and de-centralised rubber seed processing facilities are studied. The network model shows that the selection of rubber seed processing plant is highly dependant on the volume of feedstock. A simplified real case study is presented to demonstrate the optimisation model. In addition, biodiesel price is largely dependent on the feedstock market. Thus, comparison of crude palm oil (CPO) and RSO production processes have been made in term of (i) energy and utility consumptions, (ii) feedstock price and (iii) environmental impact. Sensitivity analysis of rubber seed oil price for obtaining optimal blending ratio of rubber seed oil and crude palm oil has been performed in order to determine the market uncertainty of the biodiesel price. The potential of substituting rubber seed oil for crude palm oil as an alternative blending feedstock for biodiesel production has been validated. [Copyright &y& Elsevier]

Industry and agriculture in Malaysia are the main contributors to economic growth and employment. These sectors also play an important role in Malaysia's total exports. The question then is whether technological innovation, sectoral output, and exports growth have had a real impact on these two sectors, which are very important for policy-making. This paper attempts to empirically identify such relations using econometric methods, including an autoregressive distributed lag (ARDL) bounds testing method and a dynamic ordinary least squares (DOLS) during 1978–2018. The results confirmed that overall long-run economic growth is the main contributor to the increase in energy consumption with a greater magnitude than in the short-run. In the long-run, an increase of 1% in economic growth leads to an increase of 4.6% and 1.1% in energy demand in agriculture and industrial sectors, respectively. Exports are the second largest contributor to energy demand in the overall economy and the agriculture sector. Finally, the technological innovation that enhances energy efficiency is only effective in reducing energy consumption in the industrial sector, which ultimately reduces emissions. [Display omitted] • It the relationships between energy consumption and crude oil price is investigated. • Technological innovation have negative relationships with energy consumption. • Economic growth is the main factor to energy consumption in the short- and long-runs. • The magnitude of long-run economic growth effects are greater than the short-run. • Agriculture export is the main contributor to energy consumption in the short-run. [ABSTRACT FROM AUTHOR]