Search

This paper delves into the potential impact of a changing climate on the energy performance of European buildings. Research aims to provide a comprehensive evaluation of current energy requirements focusing on the envelope, considering existing regulations in national policies. Energy simulations are conducted at 94 locations across the European Union to cover the climatic variability and Koppen climate classification. The research analyzes future climate scenarios for the years 2030, 2050, and 2070, using three different Representative Concentration Pathways (RCP 2.6, 4.5, 8.5). According to a comprehensive analysis of heating, cooling, and overall energy performance, climate plays a significant role in buildings' energy balance. In moderately cool climate countries, the demand for air conditioning is projected to decrease in the years ahead. Conversely, in countries with a warm climate, there is a projected increase in the overall energy demand. Consequently, a revision of current energy regulations should be a priority. Providing insights into the relation between building design, energy efficiency, and climate change, the research identifies policy adjustments to ensure buildings can effectively respond to changing climatic conditions. A holistic and dynamic approach can support building design accounting for long-term impacts of climate change to create resilient and energy-efficient structures. • National building energy regulations of European Member States do not tackle climate change. • Over next decades, a decrease in heating demand is forecasted across all climate zones. • There is potential for a future considerable increase of cooling demand in Europe. • A reduction in total building energy demand in colder climates and an increase in warmer climates can be expected. • Revise national energy regulations, especially in warmer zones, to curb the expected rise in Europe's total energy demand. [ABSTRACT FROM AUTHOR]

The energy retrofitting of residential stock is not always straightforward where heritage protected housing is concerned. In southern Europe, many examples built under the Modern Movement codes are now obsolete in terms of energy efficiency. The aim of this paper is to assess the potential for improvement of comfort conditions and energy efficiency in Mediterranean heritage residential buildings, through the incorporation of passive strategies in keeping with preserving heritage values. Long-term monitoring and field tests in representative flats of the case-study building were carried out and, focusing on a single example, adaptive comfort equations were used to assess results. The passive strategies considered are the thermal isolation of the air cavities of walls, changing window frames, optimizing window glazing, and setting up regular mechanical ventilation rates for indoor air changes. Although simulation results generally predict a better energy performance after testing retrofit strategies, the potential decrease in energy demand is more noticeable than the potential improvement in comfort conditions. • The improvement of comfort and energy efficiency in a heritage building is assessed. • Long-term monitoring and field tests were carried out in representative flats. • Passive strategies in keeping with preserving heritage values were examined. • Adaptive comfort equations were used to assess results focusing on one flat. • Energy efficiency improvements are more noticeable than those of comfort conditions. [ABSTRACT FROM AUTHOR]

Abstract Waste heat is an abundant resource that if recovered with a heat pump would increase energy efficiency in industrial processes. This will provide improvements in heat utilization and reduce the environmental impact of greenhouse gas emissions from the combustion of fossil fuel. A hydrocarbon high temperature heat pump has been developed to demonstrate the potential to deliver heat at a temperature of 115 °C. The heat pump provides heat for applications such as drying, pasteurization and other processes. Using hydrocarbons, the heat pump aims for a clean energy system. This paper reports on a 20 kW capacity cascade heat pump with propane in the low temperature cycle and butane in the high temperature cycle. Based on a theoretical model, an experimental setup is built with standard components that are commercially available. A prototype compressor is investigated for its performance at high temperature conditions. The heat pump can recover waste heat at 30 °C and deliver heat up to 115 °C. With an average heating coefficient of performance (COP) of 3.1 for a temperature lift of 58–72 K, the heat pump is a more cost efficient and environmentally friendly system compared to existing solutions of a steam boiler. Highlights • Experimental investigation of a high temperature heat pump up to 115 °C. • Experimental investigation of a modified compressor for high temperature heat pump. • Coefficient of performance (COP) of 2.1 and 3.1 for waste heat at 30 °C and 60 °C. • Heat pump COP at 60 °C waste heat break-evens with gas boilers in less than 3 years. • Carbon emissions reduction of over 95% in Norway and 30% in Europe. [ABSTRACT FROM AUTHOR]

By 2020 Europe has to increase its energy efficiency and share of renewables in 20%. However, even accomplishing these challenging objectives Europe will be effectively wasting energy as we demonstrate in this paper. In our way towards a fully renewable scenario, we need at least to stop wasting energy in order to guarantee the energy supply needed for growth and comfort. We waste energy when we employ more primary energy than the final energy we ultimately use and this excess cannot be reutilized. In this paper we propose the WE (wasted energy) as a novel metric to measure the performance of energy systems and set up appropriate targets. The WE incorporates information about energy efficiency and renewable sources. Unlike European legislation, the WE considers them in an integrated way. This approach will help Member States to exploit their intrinsic capabilities and design their optimum strategy to reach their objectives. Using the information in Eurostat, we calculate the WE of Member States in EU-28 and their evolution. We also analyze illustrative examples to highlight strategies to reduce the WE, study the connection between economic development and WE, and provide a tool to diagnose the potential of improvement of an energy system. [ABSTRACT FROM AUTHOR]

Europe is encouraging new buildings to minimize their primary energy dependence to be considered, from 2021, Nearly Zero Energy Buildings (NZEB). In this regard, solar thermal energy is being extensively used as a renewable source to produce Domestic Hot Water (DHW). However, solar thermal energy fields may be oversized during the warmest season of the year, rejecting the waste heat to the ambient while increasing the air conditioning demand. The Solar-driven Ejector Refrigeration System (SERS) may be a solution for solar cooling. Nevertheless, the SERS performance is constrained when low to medium temperature solar thermal collectors, commonly installed for DHW production, are used in warm climates. Consequently, this paper reformulates the SERS application as a novel fresh air pre-cooling system for air handling units. Thereby, greater evaporating temperatures that enable the SERS adoption in NZEB are explored. In doing so, the seasonal performance under severe operating conditions is analyzed considering the two-phase flow ejector geometry, as well as refrigerants with low global warming potential. Main results demonstrate a maximum seasonal COP of 0.37 by using R717. Moreover, an average cooling capacity of 28.3 kW could be produced per kW of electricity if an optimized multi-ejector solution with R600 is adopted. • A novel fresh air pre-cooling system for air handling units is presented. • The Solar Ejector Refrigeration System (SERS) is modeled and analyzed. • Low GWP refrigerants and the geometry of two-phase flow multi-ejector modules are considered. • A seasonal based simulation is conducted to obtain the seasonal COP of the system. • A cooling capacity above 28 kW could be produced per kW of electricity consumed by the pump. [ABSTRACT FROM AUTHOR]

Abstract: In transmission and distribution systems, the high number of installed transformers, a loss source in networks, suggests a good potential for energy savings. This paper presents how the Spanish Distribution regulation policy, Royal Decree 222/2008, affects the overall energy efficiency in distribution transformers. The objective of a utility is the maximization of the benefit, and in case of failures, to install a chosen transformer in order to maximize the profit. Here, a novel method to optimize energy efficiency, considering the constraints set by the Spanish Distribution regulation policy, is presented; its aim is to achieve the objectives of the utility when installing new transformers. The overall energy efficiency increase is a clear result that can help in meeting the requirements of European environmental plans, such as the ‘20–20–20’ action plan. [ABSTRACT FROM AUTHOR]

Abstract: This study begins with a review of energy consumption by end-use sector in Hawaii. Then, the energy generated from renewable energy sources is analyzed between 1991 and 2006. The results show that while geothermal is a considerable source of renewable energy on the Island of Hawaii (also known as Big Island), fossil fuel is the main energy source in the State of Hawaii. The energy intensity index for the State of Hawaii is then calculated by dividing energy consumption per capita by the income per capita. The calculated energy intensity index reveals that energy consumption is directly controlled by per capita income. The results also indicate that the energy intensity index increases over time despite positive developments in energy efficient technologies. In the second part of the paper, the effect of the tourism industry on energy usage in the State of Hawaii is analyzed. The results show that tourism volume, measured in terms of tourist arrival numbers, does not change the energy consumption directly. However, a change in tourism volume does affect per capita income within a few months to a year. In the last part of the study, the energy efficiency index of Hawaii is compared with consumption averages for the US, California and the most energy efficient country in Europe, Denmark. The comparison shows that Hawaii lags behind California and Denmark in terms of energy efficiency. The comparison also shows that an increase in energy efficiency corresponds to an increase in per capita income across the board, which is in agreement with a recent report published by the American Physical Society. [Copyright &y& Elsevier]