Search

In this paper an approach for analysing the potential for implementation of different technology pathways for the European pulp and paper industry (PPI) is presented. The approach is based on detailed technical research and aggregates the knowledge from previous studies to incorporate the whole European PPI. Thus, the potential for different technology pathways can be estimated on a European level whilst still considering important characteristics of individual mills. The usefulness of the approach was exemplified by applying it to a case study of the potential for introduction of carbon capture and storage (CCS) within the European PPI. The results from the case study show that for the European PPI, CCS has an up-hill road in order to be a viable, large scale alternative for reduction of CO2 emissions. If CCS is to be introduced in large scale within the European PPI, large biomass-based point sources of CO2 emissions need to be included when planning for CCS infrastructure and also the infrastructure needs to be built out for clusters emitting <20 MtCO2/yr. [ABSTRACT FROM AUTHOR]

In this paper, the methods of the integration of a supercritical coal-fired power plant with membrane CCS installation are shown. In addition to membrane modules, the CCS installation also consists of two vacuum pumps and two CO2 compressors. In this paper, the relationship between the auxiliary power required to drive these machines and the recoverable amount of heat is shown. This relationship is the reason for the integration of the supercritical coal unit with the CCS installation, which is used for cooling compressed CO2 in the CCS installation by use of condensate (or feed water) from the supercritical coal unit cycle. This cooling process causes both a reduction of the auxiliary power required to drive the compressors and vacuum pumps and increase of power ratio of a steam turbine. In this paper, the optimisation method for minimising the decrease of overall efficiency of the power plant connected with its integration with CCS installation is shown. This results in choosing the optimal pressure ratios in the applied compressors and vacuum pumps under the condition of sufficient heat transmission to the steam turbine cycle. For investigated units, the cost of CO2 emission avoidance and the break-even price of electricity were also calculated. [Copyright &y& Elsevier]

Abstract: In this paper, different electricity demand scenarios for Spain are presented. Population, income per capita, energy intensity and the contribution of electricity to the total energy demand have been taken into account in the calculations. Technological role of different generation technologies, i.e. coal, nuclear, renewable, combined cycle (CC), combined heat and power (CHP) and carbon capture and storage (CCS), are examined in the form of scenarios up to 2050. Nine future scenarios corresponding to three electrical demands and three options for new capacity: minimum cost of electricity, minimum CO2 emissions and a criterion with a compromise between CO2 and cost (CO2-cost criterion) have been proposed. Calculations show reduction in CO2 emissions from 2020 to 2030, reaching a maximum CO2 emission reduction of 90% in 2050 in an efficiency scenario with CCS and renewables. The contribution of CCS from 2030 is important with percentage values of electricity production around 22–28% in 2050. The cost of electricity (COE) increases up to 25% in 2030, and then this value remains approximately constant or decreases slightly. [Copyright &y& Elsevier]