Search

To explore the potential for further enhancing the gas mixing uniformity of natural gas (NG) engines, this paper identifies turbulent kinetic energy (TKE), which has an essential impact on gas mixing, as the entry point of the research. After establishing a computational fluid dynamics (CFD) model for NG engines' direct injection and mixing processes, the inlet pressure is selected as the experimental variable to investigate the influence of TKE on gas mixing uniformity. In particular, by proposing the theoretical concept of the core mixing stage, the numerical variation rule between the best mixture concentration region (BMCR) percentage and the mean turbulent kinetic energy (MTKE) of the core mixing stage is analyzed under certain injection timing conditions. The results indicate that, with identical intake pressures, an advanced gas injection timing elevates the total turbulence kinetic energy (TTKE) during the core mixing stage, thereby amplifying the uniformity of the gas mixture at the ignition. In specific scenarios, as the intake pressure increases, the decreasing trend in the BMCR proportion closely resembles the diminishing trend in the MTKE during the core mixing stage. Scrutinizing the variation trend in either parameter allows for an approximate prediction of the variation trend in the other parameter. When the intake pressure is gradually raised from the naturally aspirated state, the adequacy of the gas jet development is progressively reduced by the increasing back pressure in the cylinder. [ABSTRACT FROM AUTHOR]

In recent decades, research on alternative fuel engines is becoming more and more popular. Compressed natural gas (CNG) has the advantages of abundant reserves and a lower cost. It can reduce vehicle emissions relatively quickly and has little impact on the entire transportation infrastructure. As the fourth generation of a gas fuel supply method, gas fuel direct injection (DI) technology can effectively avoid volumetric efficiency reduction and power reduction problems of the port fuel injection (PFI) method. However, the former's mixing path and duration are shortened greatly, which often leads to poor mixing uniformity. In order to improve the in-cylinder mixing uniformity, the in-cylinder mixing process of the CNG-fueled engine is taken as the research object in this study. The computational fluid dynamics (CFDs) models of the mixing process for the PFI and DI modes are established, and their mixing uniformities are compared. Besides, based on the authors' previous research, the influence mechanism of the piston crown shape and fuel injection angle on the mixing process of the CNG DI engine is explored. The results show that the probability distribution frequency (PDF) of the best mixture concentration region (BMCR) is as high as 72% for the PFI mode, which is much higher than for the DI mode. The shorter jet impingement distance of the flat top piston leads to higher turbulent kinetic energy (TKE) intensity, and the in-cylinder mixing uniformity will be improved. When gas fuel is injected into an area with a higher in-cylinder TKE, the average in-cylinder TKE will be higher, and the in-cylinder mixture will be more homogeneous. [ABSTRACT FROM AUTHOR]

The steady-state injection characteristic of gas fuel injector is one of the key factors that affects the performance of gas fuel engine. The influences of different injection strategies, such as different injection angles and different injection positions, on the mixing performance in gas-fueled engine have been emphasized in previous literatures. However, the research on the injection characteristics of the gas fuel injector itself are insufficient. The three-dimensional steady-state computational fluid dynamics (CFD) models of two kinds of injectors, in different opening manners, and the other two kinds of injectors, in different sealing methods, were established in this paper. The core region speed, stagnation pressure loss and mass flow rate were compared. Additionally, the effective injection pressure (EIP) concept was also used to evaluate the injection efficiency of gas fuel injector. The simulation results show that the jet speed of the pull-open injector is higher than the push-open injector under the same operating conditions. The injection efficiency of the pull-open valve is about 56.0%, while the push-open valve is 50.3%. In general, the steady-flow characteristic of the pull-open injector is better than that of the push-open one. The injection efficiency of the flat sealing injector is 55.2%, slightly lower than the conical sealing method. [ABSTRACT FROM AUTHOR]