Search

This study focuses on the investigation and comparison of combustion characteristic parameters and combustion performance indices between fast-growing trees and agricultural residues as biomass sources. The investigation is conducted through direct combustion in an air environment using a thermogravimetric analyzer (TGA). Additionally, partial least squares regression (PLSR)-based models were developed to assess combustion performance indices via near-infrared spectroscopy (NIRS), serving as a non-destructive alternative method. The results obtained through the TGA reveal that, specifically, fast-growing trees display higher average ignition temperature (227 °C) and burnout temperature (521 °C) in comparison to agricultural residues, which exhibit the values of 218 °C and 515 °C, respectively. Therefore, fast-growing trees are comparatively difficult to ignite, but sustain combustion over extended periods, yielding higher temperatures. However, despite fast-growing trees having a high ignition index (Di) and burnout index (Df), the comprehensive combustion performance (Si) and flammability index (Ci) of agricultural residue are higher, indicating the latter possess enhanced thermal and combustion reactivity, coupled with improved combustion stability. Five distinct PLSR-based models were developed using 115 biomass samples for both chip and ground forms, spanning the wavenumber range of 3595–12,489 cm−1. The optimal model was selected by evaluating the coefficients of determination in the prediction set (R2P), root mean square error of prediction (RMSEP), and RPD values. The results suggest that the proposed model for Df, obtained through GA-PLSR using the first derivative (D1), and Si, achieved through full-PLSR with MSC, both in ground biomass, is usable for most applications, including research. The model yielded, respectively, an R2P, RMSEP, and RPD, which are 0.8426, 0.4968 wt.% min⁻4, and 2.5; and 0.8808, 0.1566 wt.%2 min⁻2 °C⁻3, and 3.1. The remaining models (Di in chip and ground, Df, and Si in chip, and Ci in chip and ground biomass) are primarily applicable only for rough screening purposes. However, including more representative samples and exploring a more suitable machine learning algorithm are essential for updating the model to achieve a better nondestructive assessment of biomass combustion behavior. [ABSTRACT FROM AUTHOR]

This study investigates the non-destructive analysis of proximate parameters (moisture content, MC; volatile matter, VM; fixed carbon, FC; ash content) in various chipped and ground biomass using a combination of destructive thermogravimetric analysis (TGA) and non-destructive near-infrared spectroscopy (NIRS) with partial least squares regression (PLSR). The thermogravimetric method determines proximate analysis data through TG and DTG curves, tracking biomass mass loss over time or temperature. NIRS scans chipped biomass in diffuse reflectance, and ground biomass in transflectance mode, covering the wavenumber range from 3595 to 12,489 cm−1. PLSR-based models (Full-PLSR, GA-PLSR, SPA-PLSR, MP PLSR 5-range method, and MP PLSR 3-range method) are developed and evaluated based on R2P, RMSEP, and RPD. MC and FC models for chip biomass exhibit satisfactory performance, making them cautiously applicable in various applications, including research. Optimal models for MC and FC in chip biomass, constructed using GA-PLSR with the second derivative and Full-PLSR with a constant offset, yield high R2P values (0.8654 and 0.8773), low RMSEP values (0.85% and 2.12%), and high RPD values (2.9 and 3.0), indicating applicative capabilities. Other parameters such as MC and FC in ground biomass, as well as VM and ash content in both chip and ground biomass, are found suitable for rough screening. Model sensitivity, assessed by calculating LOQ, indicates high sensitivity for VM in both chip and ground biomass and FC in chip biomass, as the calculated LOQ value is lower than the minimum reference values used during model development. However, for the remaining parameters, LOQ values surpass the established minimum reference value, suggesting limitations in predicting samples below the calibration range. Continuous model enhancement incorporating an ample number of representative biomass samples and consistent validation with unknown samples are imperative for ensuring accurate predictions. [ABSTRACT FROM AUTHOR]

The ultimate analysis parameters, including carbon (C), hydrogen (H), nitrogen (N), and oxygen (O) content in biomass, were rarely found to be predicted by non-destructive tests to date. In this research, we developed partial least squares regression (PLSR) models to predict the ultimate analysis parameters of chip biomass using near-infrared (NIR) raw spectra of non-wood and wood samples from fast-growing tree and agricultural residue and nine different traditional spectral preprocessing techniques. These techniques include first derivative (sd1), second derivative (sd2), constant offset, standard normal variate (SNV), multiplicative scatter correction (MSC), vector normalization, min-max normalization, mean centering, sd1 + vector normalization, and sd1 + MSC. Additionally, we employed a genetic algorithm (GA), successive projection algorithm (SPA), multi-preprocessing (MP) 5-range, and MP 3-range to develop a PLSR model for rapid prediction. A dataset consisting of 120 chip biomass samples was utilized for model development in which the samples were non-wood samples of 65–67% and wood samples of 33–35%, and the model performance was evaluated and compared. The selection of the optimum performing model was mainly based on criteria such as the coefficient of determination in the prediction set (R2P), root mean square error of the prediction set (RMSEP), and the ratio of prediction to deviation (RPD). The optimal model for weight percentage (wt.%) of C was obtained using GA–PLSR, yielding R2P, RMSEP, and RPD values of 0.6954, 1.1252 wt.%, and 1.8, respectively. Similarly, for wt.% of O, the most effective model was obtained using the multi-preprocessing PLSR–5 range method with R2P of 0.7150, RMSEP of 1.3088 wt.%, and RPD of 1.9. For wt.% of N, the optimal model was obtained using the MP PLSR-3 range method, resulting in R2P, RMSEP, and RPD values of 0.6073, 0.1008 wt.%, and 1.6, respectively. However, wt.% of the H model provided R2P, RMSEP, and RPD values of 0.5162, 0.2322 wt.%, and 1.5, respectively. Notably, the limit of quantification (LOQ) values for C, H, and O were lower than the minimum reference values used during model development, indicating a high level of sensitivity. However, the LOQ for N exceeded the minimum reference value, implying the samples to be predicted by the model must be in the range of reference range in the calibration set. By scatter plot analysis, the effect of combined non-wood and wood spectra of biomass chips on rapid prediction of ultimate analysis parameters using NIR spectroscopy was investigated. To include different species in a model, the species have to be not only in the different values of the constituents to make a wider range for a robust model, but also must provide their trend line characteristics in the scatter plot, i.e., correlation coefficient (R), slope, and intercept (same slope and slope approached to 1, and intercept is same (no gap) and approached zero, high R approached to 1). The effect of the R, slope, and intercept to obtain the better-optimized model was studied. The results show that the different species affected the model performance of each parameter prediction in a different manner, and by scatter plot analysis, which of these species were affecting the model negatively and how the model could be improved was indicated. This is the first time the effect has been studied by the principle of a scatter plot. [ABSTRACT FROM AUTHOR]

In this study, partial least squares regression (PLSR) models were developed using no preprocessing, traditional preprocessing, multi-preprocessing 5-range, multi-preprocessing 3-range, a genetic algorithm (GA), and a successive projection algorithm (SPA) to assess the higher heating value (HHV) and ultimate analysis of grounded biomass for energy usage by employing near-infrared (NIR) spectroscopy. A novel approach was utilized based on the assumption that using multiple pretreatment methods across different sections in the entire NIR wavenumber range would enhance the performance of the model. The performance of the model obtained from 200 biomass samples for HHV and 120 samples for ultimate analysis were compared, and the best model was selected based on the coefficient of determination of the validation set, root mean square error of prediction, and the ratio of prediction to deviation values. Based on the model performance results, the proposed HHV model from GA-PLSR and the N models from the multi-preprocessing PLSR 5-range could be used for most applications, including research, whereas the C and H models from GA-PLSR and the O model from the multi-preprocessing PLSR 5 range method 5-range air performance and are applicable only for rough screening. The overall findings highlight that the multi-preprocessing 5-range method, which was attempted as a novel approach in this study to develop the PLSR model, demonstrated better accuracy for HHV, C, N, and O, improving these models by 4.1839%, 8.1842%, 3.7587%, and 4.0085%, respectively. Therefore, this method can be considered a reliable and non-destructive alternative method for rapidly assessing biomass properties for energy usage and can also be used effectively in biomass trading. However, due to the smaller number of samples used in the model development, more samples are needed to update the model for robust application. [ABSTRACT FROM AUTHOR]