Search

The rapid development of renewable energy sources and electricity storage technologies is further driving the change and evolution of traditional energy systems. The aim is to interconnect the different electricity systems between and within countries to ensure greater reliability and flexibility. However, challenges are faced in reaching it, such as the power grid complexity, the system control, voltage fluctuations due to the reverse power flow, equipment overloads, resonance, incorrect island setting, and the diversity of user needs. The electricity grid digitalization in the market also requires the installation of smart devices to enable real-time information exchange between the generator and the user. Inverter-based distributed generation (DG) may be used to control the grid voltage. Smart PV inverters have the capability to supply both inductive and capacitive reactive power to control the voltage at the point of interconnection with the grid, and only technical parameters of smart PV inverters limit this capability. Reactive power control is related to ensuring the quality of voltage in the electricity distribution network and compensating reactive power flows, which is a technical–economic aspect. The goal of this research is to present an analysis of controllers that supply reactive power to the electrical grid via PV systems. This research analyzes recent research on local, centralized, distributed, and decentralized voltage control models in distribution networks. The article compares various approaches and highlights their advantages and disadvantages. The voltage control strategies and methodologies mentioned in the article can serve as a theoretical foundation and provide practical benefits for PV system development in distribution networks. The results of the research show that the local voltage control approach, as well as linear and intelligent controllers, has great potential. [ABSTRACT FROM AUTHOR]

As the number of available renewable energy sources has increased annually, there has been a corresponding rise in the levels of pollution created by traditional electricity generation, ultimately contributing to breaking down the stability of the electrical system at large. Therefore, there is an increasing need to integrate the use of nonpolluting electricity sources, such as pumped storage hydropower plants (PSHP), to ensure the stability of the power system and to maintain the frequency of the system from year-to-year. This paper addresses the issue of PSHP being unsuitable for providing Frequency Containment Reserve (FCR) services and proposes real measurements of the aggregation approach to obtain different data arrays. Based on this, the proposed methodology is orientated toward obtaining transfer functions that were developed using the parametric identification models, and the efficiency of these functions was thoroughly investigated. The proposed transfer function in this paper, in combination with battery energy storage system (BESS) technologies, would allow PSHP technologies to occupy a space in the ancillary services market by providing FCR, Frequency Restoration Reserve (FRR), and Replacement Reserve (RR) services. The performance of the function activated in the BESS is positively validated using the Simulink modeling environment. [ABSTRACT FROM AUTHOR]

The traditional unidirectional, passive distribution power grids are rapidly developing into bidirectional, interactive, multi-coordinated smart grids that cover distributed power generation along with advanced information communications and electronic power technologies. To better integrate the use of renewable energy resources into the grid, to improve the voltage stability of distribution grids, to improve the grid protection and to reduce harmonics, one needs to select and control devices with adjustable reactive power (capacitor batteries, transformers, and reactors) and provide certain solutions so that the photovoltaic (PV) converters maintain due to voltage. Conventional compensation methods are no longer appropriate, thus developing measures are necessary that would ensure local reactive and harmonic compensation in case an energy quality problem happens in the low voltage distribution grid. Compared to the centralized methods, artificial intelligence (heuristic) methods are able to distribute computing and communication tasks among control devices. [ABSTRACT FROM AUTHOR]

It is essential for the electricity sector to analyze and determine the distribution capacity throughput and apply new methods aimed at increasing the capacity of the transmission system. Consequently, the transition to modern electricity networks is two-sided, i.e., involving technological and social modifications. The demand response (DR) redistributes consumption away from peak times when grid load and costs are the highest. It incentivizes customers to use electricity when supply is high and inexpensive due to various market mechanisms. The present DR policy proposals stress the importance of fostering behavioral change through competitive pricing and customer participation in reducing carbon emissions and implementing smart energy solutions (including monitoring tools, such as smart meters and applications). The internet of things (IoT) has been applied to ensure adaptive monitoring of energy consumption and cost-effective and adequate demand-side management (DSM). The article is based on the research of the most recent sources of DR implementation methods applied at the power distribution level. It explains the main concepts, classifications, and entities implementing DSM programs, and suggests new visions and prospects for DSM and DR. Moreover, it discusses the application of blockchain technology potential for the internet of energy. [ABSTRACT FROM AUTHOR]