Search

In order to improve the cuttings transport ability and well hole purification effect of horizontal shale gas wells in the Sichuan and Chongqing area, a new type of aluminum alloy drill pipe is put forward, and the floatability is validated by theoretical analysis and actual parameter calculation. According to the cuttings migration mechanism, the cuttings cleaning simulation model of the new aluminum alloy drill pipe and the traditional steel drill pipe was established by Fluent, and the hexahedral mesh is used to divide the model. Thus, the mesh independence and convergence of the two models are verified. Then, the simulation model is verified by comparing the calculation results of the two simulation models with the experimental data of the indoor cuttings migration device. Finally, the rock-cleaning ability of the two drill pipes is analyzed under the conditions of changing the cuttings particle size, well inclination angle, displacement, and mechanical speed. Compared with the traditional steel drill pipe, the new aluminum alloy drill pipe can improve the borehole purification capacity by 13% on average. This research result is of great significance in reducing the quality of cuttings in the annulus and improving the borehole purification effect. [ABSTRACT FROM AUTHOR]

The hydrostatic bearing is the core component of ultra-precision computer numerical control (CNC) machine tools. Because the temperature rise in the oil film of hydrostatic bearings seriously affects the working accuracy of the bearings, it is important to study the flow and heat transfer characteristics of the oil film. Based on the physical model of an incompressible viscous fluid flowing in a flat microfluidic boundary layer, velocity, temperature and heat flux distribution equations of oil film are constructed by theories of heat transfer and hydrodynamics. Then, the effects of several parameters on velocity distribution, temperature distribution and heat flux distribution are analyzed, such as the upper plate velocity, the channel length, and so on. The results show that the dimensionless velocity of the oil film decreases with the increase in the upper plate velocity and the channel length. The oil film temperature distribution can be divided into three zones: the increasing zone, stabilizing zone and decreasing zone. The heat flux decreases linearly with the increase in the plate thickness, and increases linearly with the increase in the temperature difference. [ABSTRACT FROM AUTHOR]