Search

A methanol island, powered by solar or wind energy, indirectly captures atmospheric CO2 through the ocean and combines it with hydrogen gas to produce a synthetic fuel. The island components include a carbon dioxide extractor, a desalinator, an electrolyzer, and a carbon dioxide-hydrogen reactor to complete this process. In this study, the optimal locations to place such a device in the Mediterranean Sea were determined, based on three main constraints: power availability, environmental risk, and methanol production capability. The island was numerically simulated with a purpose built python package pyseafuel. Data from 20 years of ocean and atmospheric simulation data were used to "force" the simulated methanol island. The optimal locations were found to strongly depend on the power availability constraint, with most optimal locations providing the most solar and/or wind power, due to the limited effect the ocean surface variability had on the power requirements of methanol island. Within this context, optimal locations were found to be the Alboran, Cretan, and Levantine Sea due to the availability of insolation for the Alboran and Levantine Sea and availability of wind power for the Cretan Sea. These locations were also not co-located with areas with larger maximum significant wave heights, thereby avoiding areas with higher environmental risk. When we simulate the production at these locations, a 10 L s−1 seawater inflow rate produced 494.21, 495.84, and 484.70 mL m−2 of methanol over the course of a year, respectively. Island communities in these regions could benefit from the energy resource diversification and independence these systems could provide. However, the environmental impact of such systems is poorly understood and requires further investigation. [ABSTRACT FROM AUTHOR]

Investments into wind power generation may be hampered by the uncertainty of future revenues caused by the natural variability of the wind resource, the impact of climate change on wind potential and future electricity prices, and the regulatory risks. We quantify the uncertainty of the economic value of wind farms in France, Germany, and Denmark, and evaluate the cost of support mechanisms needed to ensure the profitability of wind farms under present and future climates. To this end, we built a localised model for wind power output and a country-level model for electricity demand and prices. Our study reveals that support mechanisms are needed for current market conditions and the current climate, as well as under future climate conditions according to several scenarios for climate change and energy transition. The cost of support mechanisms during a 15-year period is evaluated to EUR 3.8 to EUR 11.5 billion per year in France, from EUR 15.5 to EUR 26.5 billion per year in Germany, and from EUR 1.2 to EUR 3.3 billion per year in Denmark, depending on the scenario considered and the level of penetration of wind energy. [ABSTRACT FROM AUTHOR]

The viability of Variable Renewable Energy (VRE)-investment strategies depends on the response of dispatchable producers to satisfy the net load. We lack a simple research tool with sufficient complexity to represent major phenomena associated with the response of dispatchable producers to the integration of high shares of VRE and their impact on system costs. We develop a minimization of the system cost allowing one to quantify and decompose the system value of VRE depending on an aggregate dispatchable production. Defining the variable cost of the dispatchable generation as quadratic with a coefficient depending on macroeconomic factors such as the cost of greenhouse gas emissions leads to the simplest version of the model. In the absence of curtailment, and for particular parameter values, this version is equivalent to a mean-variance problem. We apply this model to France with solar and wind capacities distributed over the administrative regions of metropolitan France. In this case, ignoring the wholesale price effect and variability has a relatively small impact on optimal investments, but leads to largely underestimating the system total cost and overestimating the system marginal cost. [ABSTRACT FROM AUTHOR]

In this study, we examine how Battery Storage (BES) and Thermal Storage (TES) combined with solar Photovoltaic (PV) and Concentrated Solar Power (CSP) technologies with an increased storage duration and rental cost together with diversification would influence the Moroccan mix and to what extent the variability (i.e., adequacy risk) can be reduced; this is done using recent (2013) cost data and under various penetration scenarios. To do this, we use MERRA-2 climate reanalysis to simulate hourly demand and capacity factors (CFs) of wind, solar PV and CSP without and with increasing storage capabilities—as defined by the CSP Solar Multiple (SM) and PV Inverter Loading Ratio (ILR). We adjust these time series to observations for the four Moroccan electrical zones over the year 2018. Our objective is to maximize the renewable (RE) penetration and minimize the imbalances between RE production and consumption considering three optimization strategies. We analyze mixes along Pareto fronts using the Mean-Variance Portfolio approach—implemented in the E4CLIM model—in which we add a maximum-cost constraint to take into account the different rental costs of wind, PV and CSP. We propose a method to calculate the rental cost of storage and production technologies taking into account the constraints on storage associated with the increase of SM and ILR in the added PV-BES and CSP-TES modules, keeping the mean solar CFs fixed. We perform some load bands-reduction diagnostics to assess the reliability benefits provided by each RE technology. We find that, at low penetrations, the maximum-cost budget is not reached because a small capacity is needed. The higher the ILR for PV, the larger the share of PV in the mix compared to wind and CSP without storage is removed completely. Between PV-BES and CSP-TES, the latter is preferred as it has larger storage capacity and thus stronger impact in reducing the adequacy risk. As additional BES are installed, more than TES, PV-BES is favored. At high penetrations, optimal mixes are impacted by cost, the more so as CSP (resp., PV) with high SM (resp., ILR) are installed. Wind is preferably installed due to its high mean CF compared to cost, followed by either PV-BES or CSP/CSP-TES. Scenarios without or with medium storage capacity favor CSP/CSP-TES, while high storage duration scenarios are dominated by low-cost PV-BES. However, scenarios ignoring the storage cost and constraints provide more weight to PV-BES whatever the penetration level. We also show that significant reduction of RE variability can only be achieved through geographical diversification. Technological complementarity may only help to reduce the variance when PV and CSP are both installed without or with a small amount of storage. However, the diversification effect is slightly smaller when the SM and ILR are increased and the covariances are reduced as well since mixes become less diversified. [ABSTRACT FROM AUTHOR]

In recent years, environmental concerns resulted in an increase in the use of renewable resources such as wind energy. However, high penetration of the wind power is a challenge due to the intermittency of this resource. In this context, the wind energy forecasting has become a major issue. In particular, for the end users of wind energy forecasts, a critical but often neglected issue is the economic value of the forecast. In this work, we investigate the economic value of forecasting from 30 min to 3 h ahead, also known as nowcasting. Nowcasting is mainly used to inform trading decisions in the intraday market. Two sources of uncertainty affecting wind farm revenues are investigated, namely forecasting errors and price variations. The impact of these uncertainties is assessed for six wind farms and several balancing strategies using market data. Results are compared with the baseline case of no nowcasting and with the idealized case of perfect nowcast. The three settings show significant differences while the impact of the choice of a specific balancing strategy appears minor. [ABSTRACT FROM AUTHOR]

We analyzed the role of predictable and unpredictable variability in the identification of optimal renewable energy mixes in an electricity system. Renewable energy sources are the fastest growing energy generation technology, but the variable nature of production linked to climate variability raises structural, technological and economical issues. This work proposes the differentiation of the treatment applied to predictable and unpredictable variability in the context of Markowitz portfolio theory for optimal renewable deployment. The e4clim model was used as a tool to analyze the impact of predictable sources of generation variability on the optimal renewable energy mixes. Significant differences appeared, depending on the consideration of risk, all of them showing room for improvement with respect to the current situation. The application of the methods developed in this study is encouraged in mean-variance analyses, since its contribution favors scenarios where unpredictable variability in the climate-powered renewable energy sources are considered for their risk introduction. [ABSTRACT FROM AUTHOR]

In this paper, we analyze the sensitivity of the optimal mixes to cost and variability associated with solar technologies and examine the role of Thermal Energy Storage (TES) combined to Concentrated Solar Power (CSP) together with time-space complementarity in reducing the adequacy risk—imposed by variable Renewable Energies (RE)—on the Moroccan electricity system. To do that, we model the optimal recommissioning of RE mixes including Photovoltaic (PV), wind energy and CSP without or with increasing levels of TES. Our objective is to maximize the RE production at a given cost, but also to limit the variance of the RE production stemming from meteorological fluctuations. This mean-variance analysis is a bi-objective optimization problem that is implemented in the E4CLIM modeling platform—which allows us to use climate data to simulate hourly Capacity Factors (CFs) and demand profiles adjusted to observations. We adapt this software to Morocco and its four electrical zones for the year 2018, add new CSP and TES simulation modules, perform some load reduction diagnostics, and account for the different rental costs of the three RE technologies by adding a maximum-cost constraint. We find that the risk decreases with the addition of TES to CSP, the more so as storage is increased keeping the mean capacity factor fixed. On the other hand, due to the higher cost of CSP compared to PV and wind, the maximum-cost constraint prevents the increase of the RE penetration without reducing the share of CSP compared to PV and wind and letting the risk increase in return. Thus, if small level of risk and higher penetrations are targeted, investment must be increased to install more CSP with TES. We also show that regional diversification is key to reduce the risk and that technological diversification is relevant when installing both PV and CSP without storage, but less so as the surplus of energy available for TES is increased and the CSP profiles flatten. Finally, we find that, thanks to TES, CSP is more suited than PV and wind to meet peak loads. This can be measured by the capacity credit, but not by the variance-based risk, suggesting that the latter is only a crude representation of the adequacy risk. [ABSTRACT FROM AUTHOR]

Transmission system operator (TSOs) need to project the system state at the seasonal scale to evaluate the risk of supply-demand imbalance for the season to come. Seasonal planning of the electricity system is currently mainly adressed using climatological approach to handle variability of consumption and production. Our study addresses the need for quantitative measures of the risk of supply-demand imbalance, exploring the use of sub-seasonal to seasonal forecasts which have hitherto not been exploited for this purpose. In this study, the risk of supply-demand imbalance is defined using exclusively the wind energy production and the consumption peak at 7 pm. To forecast the risks of supply-demand imbalance at monthly to seasonal time horizons, a statistical model is developed to reconstruct the joint probability of consumption and production. It is based on a the conditional probability of production and consumption with respect to indexes obtained from a linear regression of principal components of large-scale atmospheric predictors. By integrating the joint probability of consumption and production over different areas, we define two kind of risk measures: one quantifies the probablity of deviating from the climatological means, while the other, which is the value at risk at 95% confidence level ( V a R 95 ) of the difference between consumption and production, quantifies extreme risks of imbalance. In the first case, the reconstructed risk accurately reproduces the actual risk with over 0.80 correlation in time, and a hit rate around 70–80%. In the second case, we find a mean absolute error (MAE) between the reconstructed and real extreme risk of 2.5 to 2.8 GW, a coefficient of variation of the root mean square error (CV-RMSE) of 3.8% to 4.2% of the mean actual V a R 95 and a correlation of 0.69 and 0.66 for winter and fall, respectively. By applying our model to ensemble forecasts performed with a numerical weather prediction model, we show that forecasted risk measures up to 1 month horizon can outperform the climatology often used as the reference forecast (time correlation with actual risk ranging between 0.54 and 0.82). At seasonal time horizon (3 months), our forecasts seem to tend to the climatology. [ABSTRACT FROM AUTHOR]

We develop an open-source Python software integrating flexibility needs from Variable Renewable Energies (VREs) in the development of regional energy mixes. It provides a flexible and extensible tool to researchers/engineers, and for education/outreach. It aims at evaluating and optimizing energy deployment strategies with higher shares of VRE, assessing the impact of new technologies and of climate variability and conducting sensitivity studies. Specifically, to limit the algorithm's complexity, we avoid solving a full-mix cost-minimization problem by taking the mean and variance of the renewable production–demand ratio as proxies to balance services. Second, observations of VRE technologies being typically too short or nonexistent, the hourly demand and production are estimated from climate time series and fitted to available observations. We illustrate e4clim's potential with an optimal recommissioning-study of the 2015 Italian PV-wind mix testing different climate data sources and strategies and assessing the impact of climate variability and the robustness of the results. [ABSTRACT FROM AUTHOR]