Search

This paper documents depositional structures and their reservoir characteristics in the Wufeng–Longmaxi shale from outcrops and cores using thin sections, X-ray powder diffraction (XRD) analysis, carbon–sulfur analyzer, helium porosimeter, decay permeameter, and focused ion beam scanning electron microscope (FIB-SEM). In the study area, clayey and silty laminae abound in the shale. Clayey laminae are rich in bedding parallel fractures, microfractures, and organic pore networks. Silty laminae are rich in isolated inorganic pores and limited amounts of bedding non-parallel fractures. Various inter-lamination of clayey and silty laminae form five depositional structure types which are closely related to the ancient hydrodynamics, paleoredox condition, and sedimentation rate and have significant impacts on shale fractures, microfractures, pore types, pore-size distribution, and porosity. For the paper lamination (PL) and grading lamination composed of siltstone and claystone (GL-SC), organic pores account for 71.6% and 61.4% of the total, and dense bedding parallel and non-parallel fractures intersect to form connective networks. In the interlaminated lamination composed of siltstone and claystone (IL), grading lamination composed of claystone (GL-C) and structureless beds (SB), organic pores merely account for 20% to 51.8% of the total and minor isolated bedding parallel fractures occur. Among five depositional structure types, the PL and GL-SC have the highest porosity, permeability, TOC content, siliceous content, organic pore proportions, and ratios of horizontal to vertical permeability, which help them become shale gas exploration and development targets. [ABSTRACT FROM AUTHOR]

Against the backdrop of the national strategic goals of carbon peaking and carbon neutrality, the imperative for China's low-carbon new energy transformation is evident. Emerging as an efficient and clean new energy source, the coal-based "three gases" (coalbed methane, tight sandstone gas, and shale gas) have gained prominence. Nevertheless, the current exploration of the coal-based "three gases" is limited to individual reservoirs, posing challenges to achieving overall extraction efficiency. The primary obstacle lies in the conspicuous disparities in gas content among different reservoirs, with the causes of such disparities remaining elusive. To address this issue, this study focused on the Permian Longtan Formation (coal, shale, and tight sandstone) in the southeastern Sichuan Basin. Through a comparative analysis of the mineral composition, organic geochemical features, and pore structure characteristics, this study aimed to delineate reservoir variations and establish a foundation for the simultaneous exploration and exploitation of the coal-based "three gases". The research findings revealed that the differences in reservoir characteristics account for the variations in gas content among coal, shale, and tight sandstone. The mineral composition of the rock formations in the study area primarily consists of quartz, feldspar, clay minerals, pyrite, calcite, and dolomite. By comparison, the coal samples from the four major coal seams in the study area exhibited relatively large pore sizes, which are favorable for gas accumulation. [ABSTRACT FROM AUTHOR]

After more than 10 years of exploration, development, research, and practical efforts, China has opened up new perspectives for the commercial exploitation of marine shale gas. While high shale gas production is a main driver for energy security and economic development in China, there have been few attempts to systemically scientific analysis the challenges, prospect, development strategies, and goals for shale gas. Here, we present a detailed comparison of the differences in shale gas between the Sichuan Basin and North America from multiple dimensions, explain how and to what extent recent advances have been made, discuss the current challenges, and provide strategies to deal with these challenges. We demonstrate that a total of 13 graptolite zones developed in the Wufeng–Longmaxi Formations, achieved by representative cores from 32 coring wells and 7 outcrop profiles, can establish the chronostratigraphic framework in the Sichuan Basin, which leads to the potential impact of high-quality reservoir distribution and shale gas production. Shale gas is still faced with the challenges of complex underground and surface conditions, low single-well EUR, and immature deep development engineering technology. To circumvent these issues, here, we propose several strategies, including sweet-spot optimization, low-cost drilling techniques, and efficient fracturing technologies. Our results strengthen the importance of adopting fundamental theoretical research and practical and feasible development goals to realize more commercial discoveries of shale gas of diverse types and higher growth of shale gas reserves and production. [ABSTRACT FROM AUTHOR]

The abundant reserve of shale gas in Sichuan Basin has become a significant natural gas component in China. To achieve efficient development of shale gas, it is necessary to analyze the stress state, pore pressure, and reservoir mechanical properties such that an accurate geomechanical model can be established. In this paper, Six wells of Neijiang-Dazu and North Rongchang (NDNR) Block were thoroughly investigated to establish the geomechanical model for the study area. The well log analysis was performed to derive the in-situ stresses and pore pressure while the stress polygon was applied to constrain the value of the maximum horizontal principal stress. Image and caliper data, mini-frac test and laboratory rock mechanics test results were used to calibrate the geomechanical model. The model was further validated by comparing the model prediction against the actual wellbore failure observed in the field. It was found that it is associated with the strike-slip (SS) stress regime; the orientation of SHmax was inferred to be 106–130° N. The pore pressure appears to be approximately hydrostatic from the surface to 1000 m true vertical depth (TVD), but then becomes over-pressured from the Xujiahe formation. The geomechanical model can provide guidance for the subsequent drilling and completion in this area and be used to effectively avoid complex drilling events such as collapse, kick, and lost circulation (mud losses) along the entire well. Also, the in-situ stress and pore pressure database can be used to analyze wellbore stability issues as well as help design hydraulic fracturing operations. [ABSTRACT FROM AUTHOR]

Recently, deep and ultra-deep shales (depth >3500 m) of the Lower Paleozoic Wufeng–Longmaxi formations (WF–LMX) have become attractive targets for shale gas exploration and development in China, and their gas contents may be influenced by the occurrence of water to some extent. However, the water content and its distribution in the different nanopores of the deep and ultra-deep shales have rarely been reported. In this study, a suite of the WF–LMX ultra-deep shale samples (5910–5965 m depth) from the Well PS1 was collected for water content measurements, and low-pressure CO2 and N2 adsorption experiments of both as-received and experimentally dried shale samples were carried out to investigate the distribution of water in the different nanopores. Since the studied ultra-deep shales are characterized by higher thermal maturity (equivalent vitrinite reflectance (EqVRo) > 2.5 %) and ultra-low water saturation, the pore water is generally dominated by irreducible water. The content of irreducible water of the studied shales varies from 1.57 to 13.66 mg/g, averaging 6.74 mg/g. Irreducible water may mainly occur in the clay-hosted pores, while it could also be hosted in parts of organic pores of organic-rich shales. Irreducible water is primarily distributed in non-micropores rather than in micropores of the studied shales, which mainly occurs in micopores with a diameter of 0.4–0.6 nm and mesopores with a diameter of 2–10 nm. Very low contents of irreducible water could reduce the specific surface area and volume of non-micropores of the shales to some extent, but the effect of irreducible water on the specific surface area of non-micropores was more significant than the volume of non-micropores, especially for organic-rich shale samples. The ultra-deep shale gas may be predominately composed of free gas, so low contents of irreducible water may play a limited role in its total gas contents. Overall, our findings can be helpful for a better understanding of water distribution in the highly-matured shales, and provide a scientific basis for ultra-deep shale gas exploration. [ABSTRACT FROM AUTHOR]

Deep marine shale gas reservoirs are extremely rich in the Sichuan basin in China. However, due to the in situ conditions with high temperature and high pressure (HTHP), in particular reservoir pressure being usually much higher than the test pressure, it is difficult to accurately clarify the adsorption behavior, as seepage theory plays an important role in shale gas reserves evaluation. Therefore, three kinds of sorbent, including illite, quartz and kerogen, and two simulation methods, containing the grand canonical ensemble Monte Carlo method and molecular dynamics method, are synthetically used to determine the methane adsorption behavior under HTHP. The results show that both absolute adsorption and excess adsorption decrease with the increase of temperature. When the pressure increases, the absolute adsorption increases quickly and then slowly, and the excess adsorption first increases and then decreases. The superposition of wall potential energy is strongest in a circular hole, second in a square hole, and weakest in a narrow slit. The effect of pore size increases with the decrease of the pore diameter. Under HTHP, multi-layer adsorption can occur in shale, but the timing and number of layers are related to the sorbent type. [ABSTRACT FROM AUTHOR]

The formation mechanism and propagation behaviors of a three-dimensional hydraulic fracture network in fractured shale reservoirs remain unclear, especially when the scale of hydraulic fractures is much larger than that of natural fractures. In this study, taking the well XH in the Longmaxi shale reservoir in the Sichuan Basin, China as an example, we develop a fully three-dimensional numerical model for hydraulic fracturing coupled with microseismicity based on the discrete lattice method. We introduce a randomly generated discrete fracture network into the proposed model and explore the formation mechanism of the hydraulic fracture network under the condition that the hydraulic fractures are much larger than natural fractures in scale. Moreover, microseismic events are inversely synthesized in the numerical model, which allows the evolution of the fracture network to be monitored and evaluated quantitatively. In addition, we analyze the effects of injection rate, horizontal stress difference, and fluid viscosity on fracture propagation. Our results show that when the scale of hydraulic fractures is much larger than that of natural fractures, the fracture morphology of "main hydraulic fractures + complex secondary fractures" is mainly formed. We find that a high injection rate can not only create a complex fracture network, but also improve the uniform propagation of multi-cluster fractures and enhance far-field stimulation efficiency. Optimizing the horizontal wellbore intervals with low horizontal stress differences as the sweet spots of hydraulic fracturing is also beneficial to improve the stimulation efficiency. For zones with a large number of natural fractures, it is recommended to use an injection schedule with high viscosity fluid early and low viscosity fluid late to allow the hydraulic fractures to propagate to the far-field to maximize the stimulation effect. [ABSTRACT FROM AUTHOR]

The increasing proportion of unconventional worldwide energy demands have consistently promoted the necessity for exploring a precise, high-resolution, objective, and quantitative stratigraphic division method for macroscopically homogeneous mudstone successions. The chemostratigraphy can resolve this problem well, although it has been applied successfully in North America, but not systematically studied in China for shale gas exploration and development. This work has conducted a chemostratigraphic analysis of Wufeng and Longmaxi Formation on the Changning section of Sichuan Province, southwestern China, to testify its applicability for shale gas exploration in China. Principal component analysis (PCA) was first employed to reduce the dimensionality of datasets. Three chemofacies, including detrital (K, Ti, Fe, Al, Na, Mg, Cr, Zr, Rb), authigenic (Ca, Sr, Mn, Si, S, Ba), and redox-organic (P, V, Ni, Zn, Cu, TOC), were found. Subsequently, constrained clustering analysis was utilized for the zonation of each chemofacies into chemozones. Consequently, the whole Changning section was divided into twelve chemozones (CZ I–CZ Ⅻ). The geochemical interpretation for these chemozones can be resolved from the regional changes in paleogeography and paleoceanography during the Late Ordovician to Early Silurian period. Thus, a three-stage geochemical evolution along the Changning section can be classified: (1) the siliceous and anoxic deposits of Wufeng Formation (CZ I–CZ III) with high TOC contents; (2) the siliceous and anoxic sedimentary rocks of bottom Longmaxi Formation with still higher TOC (CZ Ⅳ); (3) the calcarous-detrital and oxic sediments for the rest of Longmaxi Formation (CZ Ⅴ–CZ Ⅻ). In considering their high content of TOC and abundant brittle siliceous minerals, the CZ (I–Ⅳ, 0 m–33.6 m) are thought to be the most preferable sweet spot for shale gas exploration. [ABSTRACT FROM AUTHOR]

The effect of clay minerals on the methane adsorption capacity of shales is a basic issue that needs to be clarified and is of great significance for understanding the adsorption characteristics and mechanisms of shale gas. In this study, a variety of experimental methods, including XRD, LTNA, HPMA experiments, were conducted on 82 marine shale samples from the Wufeng–Longmaxi Formation of 10 evaluation wells in the southern Sichuan Basin of China. The controlling factors of adsorption capacities were determined through a correlation analysis with pore characteristics and mineral composition. In terms of mineral composition, organic matter (OM) is the most key methane adsorbent in marine shale, and clay minerals have little effect on methane adsorption. The ultra-low adsorption capacity of illite and chlorite and the hydrophilicity and water absorption ability of clay minerals are the main reasons for their limited effect on gas adsorption in marine shales. From the perspective of the pore structure, the micropore and mesopore specific surface areas (SSAs) control the methane adsorption capacity of marine shales, which are mainly provided by OM. Clay minerals have no relationship with SSAs, regardless of mesopores or micropores. In the competitive adsorption process of OM and clay minerals, OM has an absolute advantage. Clay minerals become carriers for water absorption, due to their interlayer polarity and water wettability. Based on the analysis of a large number of experimental datasets, this study clarified the key problem of whether clay minerals in marine shales control methane adsorption. [ABSTRACT FROM AUTHOR]

Complex geology and fracturing operations have led to frequent sand production problem in the shale gas well. Sand production brings huge engineering risks and seriously affects the normal production of the shale gas well. In order to study the property and source of the yielded sand, sand samples in three production periods of flowback, production test and gas production are collected from Sichuan Basin of China. Combining the methods of particle size analysis, microscope observation, scanning electron microscope, CT scanning, infrared spectroscopy and energy dispersive spectrum analysis, the multi-scale structure and composition characteristics of the yielded sand from different production periods were investigated. Results show that the sand size is the largest in the production test period and the smallest in the gas production period. The large-size sand is blocky in the flowback period, while it is flaky in the period of production test and gas production. The roundness of sand becomes worse as the sand size decreasing. Sand composition has the characteristics of fracturing proppant and shale mineral. Cementing material between large-size sands has the network structure and the higher content of aluminum and iron. Organic chemicals are found to be adhered to the sand surface in all three periods. Both shale fracture and proppant failure can generate particles that provide the material source for sand production. This research provides the source of the yielded sand and a theoretical guidance for the sand production mechanism. [ABSTRACT FROM AUTHOR]

An accurate understanding of formation and gas properties is crucial to the efficient development of shale gas resources. As one kind of unconventional energy, shale gas shows significant differences from conventional energy ones in terms of gas accumulation processes, pore structure characteristics, gas storage forms, physical parameters, and reservoir production modes. Traditional experimental techniques could not satisfy the need to capture the microscopic characteristics of pores and throats in shale plays. In this review, the uniqueness of shale gas reservoirs is elaborated from the perspective of: (1) geological and pore structural characteristics, (2) adsorption/desorption laws, and (3) differences in properties between the adsorbed gas and free gas. As to the first aspect, the mineral composition and organic geochemical characteristics of shale samples from the Longmaxi Formation, Sichuan Basin, China were measured and analyzed based on the experimental results. Principles of different methods to test pore size distribution in shale formations are introduced, after which the results of pore size distribution of samples from the Longmaxi shale are given. Based on the geological understanding of shale formations, three different types of shale gas and respective modeling methods are reviewed. Afterwards, the conventional adsorption models, Gibbs excess adsorption behaviors, and supercritical adsorption characteristics, as well as their applicability to engineering problems, are introduced. Finally, six methods of calculating virtual saturated vapor pressure, seven methods of giving adsorbed gas density, and 12 methods of calculating gas viscosity in different pressure and temperature conditions are collected and compared, with the recommended methods given after a comparison. [ABSTRACT FROM AUTHOR]

In order to effectively evaluate shale gas reservoirs with low porosity, extra-low permeability, and no natural productivity, dipole array acoustic logging, which can provide various types of information including P-wave slowness (DTC) and S-wave slowness (DTS), is widely used. As the dipole array acoustic logging tool has a larger investigation depth and is suitable for complex borehole environments, such as those with a high wellbore temperature, high drilling fluid column pressure, or irregular borehole wall, it has been mainly applied to the evaluation of lithology, gas potential, fractures, and stimulation potential in shale gas reservoirs. The findings from a case study of the Sichuan Basin in China reveal that the acoustic slowness, S-P wave slowness ratio (RMSC), and S-wave anisotropy of the dipole array acoustic logging can be used to qualitatively identify reservoir lithology, gas potential, and fractures. Using the relationship between DTC and the total porosity of shale gas reservoirs, and combined with the compensated neutron (CNL) and shale content (Vsh) of the reservoir, a mathematical model for accurately calculating the total porosity of the shale gas reservoir can be established. By using the relationship between the RMSC and gas saturation in shale gas reservoirs and tied with density log (DEN), a mathematical model of gas saturation can be established, and the determination of gas saturation by the non-resistivity method can be achieved, delivering a solution to the issue that the electric model is not applicable under low resistivity conditions. The DTS, DTC, and DEN of shale can be used to calculate rock mechanic parameters such as the Poisson's ratio (POIS) and Young's modulus (YMOD), which can be used to evaluate the shale stimulation potential. [ABSTRACT FROM AUTHOR]