Search

Considerable efforts have been made to reduce the energy consumption of buildings due to the energy crisis, and, the Korean government has supported the use of renewable energy through various grants. Among the possible renewable energy sources, geothermal energy can be used regardless of the outside weather. Therefore, energy consumption can be reduced considerably in summer and winter. Despite the increasing use of renewable energy, the use of renewables has not been operating appropriately. Therefore, this study examined some of the problems of the operation of renewable energy and some possible improvements. The aim of the study is to evaluate a building containing an actual installed multi-geothermal heat pump (Multi-GHP) system, in terms of the energy efficiency. In addition, this study evaluated the present control system and the method of complex operation regarding existing heat sources systems and GHP systems through a simulation. The results can be regarded as the result of a hybrid operation method for the improvement of an existing operation. Therefore, the Multi-GHP system energy use of a hybrid operation condition of the Multi-GHP systems and the absorption (ABS) chiller-heater system was reduced compared to the operation condition of the Multi-GHP system, and the total energy consumption of the heat source equipment was reduced. The proposed operation plan was evaluated after applying the system to a building. These results showed that the efficient operation of a Multi-GHP hybrid operation method is possible. As a result, the GHP energy use of Multi-GHP systems and the ABS chiller-heater system was reduced by 30% compared to existing operation and the total energy consumption of heat source equipment was reduced by 78%. [ABSTRACT FROM AUTHOR]

Large buildings cause more than 20% of the global energy consumption in advanced countries. In buildings such as hospitals, cooling loads represent an important percentage of the overall energy demand (up to 44%) due to the intensive use of heating, ventilation and air conditioning (HVAC) systems among other key factors, so their study should be considered. In this paper, we propose a data-driven analysis for improving the efficiency in multiple-chiller plants. Coefficient of performance (COP) is used as energy efficiency indicator. Data analysis, based on aggregation operations, filtering and data projection, allows us to obtain knowledge from chillers and the whole plant, in order to define and tune management rules. The plant manager software (PMS) that implements those rules establishes when a chiller should be staged up/down and which chiller should be started/stopped according different efficiency criteria. This approach has been applied on the chiller plant at the Hospital of León. [ABSTRACT FROM AUTHOR]

In Taiwan, over 45% of the energy in common buildings is used for the air-conditioning system. In particular, the chiller plant consumes about 70% of the energy in air-conditioning system. The electric energy consumption of air-condition system in a clean room of semiconductor factory is about 5–10 times of that in a common building. Consequently, the optimal chiller loading in energy saving of building is a vital issue. This paper develops a new algorithm to solve optimal chiller loading (OCL) problems. The proposed two-stage differential evolution algorithm integrated the advantages of exploration (global search) in the modified binary differential evolution (MBDE) algorithm and exploitation (local search) in the real-valued differential evolution (DE) algorithm for finding the optimal solution of OCL problems. In order to show the performance of the proposed algorithm, comparison with other optimization methods has been done and analyzed. The result shows that the proposed algorithm can obtain similar or better solution in comparison to previous studies. It is a promising approach for the OCL problem. [ABSTRACT FROM AUTHOR]

In this paper, an optimal energy management scheme for building microgrids with rooftop greenhouse is proposed. A building energy management system (BEMS) is utilized for the optimal fulfilment of energy demands in the building and the greenhouse. The exhaust heat generated due to the operation of air conditioners in the building is used for fulfilling the cooling demands of the greenhouse via chillers. In addition to thermal and cooling demands, the four major control parameters (temperature, humidity, light intensity, and CO2 concentration) are also considered for optimal growth of crops in the greenhouse. A multi-agent system (MAS) is adopted to realize the interaction among several households of the building, the greenhouse, and the BEMS. The MAS comprises of several inner-level, intermediate level, and upper-level agents, which are responsible for their respective tasks. The performance of the proposed optimization strategy is evaluated for two seasons of a year, i.e., summer and winter. Numerical simulations have demonstrated the effectiveness of the proposed operation scheme for optimal operation of building microgrids with rooftop greenhouses. [ABSTRACT FROM AUTHOR]