Search

Biodiesel is a proven alternative fuel that can serve as a substitute for petroleum diesel due to its renewability, non-toxicity, sulphur-free nature and superior lubricity. Waste-based non-edible oils are studied as potential biodiesel feedstocks owing to the focus on the valorisation of waste products. Instead of being treated as municipal waste, waste coffee grounds (WCG) can be utilised for oil extraction, thereby recovering an energy source in the form of biodiesel. This study evaluates oil extraction from WCG using ultrasonic and Soxhlet techniques, followed by biodiesel conversion using an ultrasonic-assisted transesterification process. It was found that n-hexane was the most effective solvent for the oil extraction process and ultrasonic-assisted technology offers a 13.5% higher yield compared to the conventional Soxhlet extraction process. Solid-to-solvent ratio and extraction time of the oil extraction process from the dried waste coffee grounds (DWCG) after the brewing process was optimised using the response surface methodology (RSM). The results showed that predicted yield of 17.75 wt. % of coffee oil can be obtained using 1:30 w/v of the mass ratio of DWCG-ton-hexane and 34 min of extraction time when 32% amplitude was used. The model was verified by the experiment where 17.23 wt. % yield of coffee oil was achieved when the extraction process was carried out under optimal conditions. The infrared absorption spectrum analysis of WCG oil determined suitable functional groups for biodiesel conversion which was further treated using an ultrasonic-assisted transesterification process to successfully convert to biodiesel. [ABSTRACT FROM AUTHOR]

The production of biodiesel using vegetable oil is an effective way to meet growing energy demands, which could potentially reduce the dependency on fossil fuels. The aim of this study was to evaluate grape seed (Vitis vinifera), Philippine tung (Reutealis trisperma), and kesambi (Schleichera oleosa) oils as potential feedstocks for biodiesel production to meet this demand. Firstly, biodiesels from these oils were produced and then their fatty acid methyl ester profiles and physicochemical properties were evaluated and compared with palm biodiesel. The results showed that the biodiesel produced from grape seed oil possessed the highest oxidation stability of 4.62 h. On the other hand, poor oxidation stability was observed for Philippine tung biodiesel at 2.47 h. The poor properties of Philippine tung biodiesel can be attributed to the presence of α-elaeostearic fatty acid. Furthermore, synthetic antioxidants (pyrogallol) and diesel were used to improve the oxidation stability. The 0.2 wt.% concentration of pyrogallol antioxidant could increase the oxidation stability of grape seed biodiesel to 6.24 h, while for kesambi and Philippine tung, biodiesels at higher concentrations of 0.3% and 0.4 wt.%, respectively, were needed to meet the minimum limit of 8 h. The blending of biodiesel with fossil diesel at different ratios can also increase the oxidation stability. [ABSTRACT FROM AUTHOR]

Optimizing the process parameters of biodiesel production is the key to maximizing biodiesel yields. In this study, artificial neural network models integrated with ant colony optimization were developed to optimize the parameters of the two-step Cerbera manghas biodiesel production process: (1) esterification and (2) transesterification. The parameters of esterification and transesterification processes were optimized to minimize the acid value and maximize the C. manghas biodiesel yield, respectively. There was excellent agreement between the average experimental values and those predicted by the artificial neural network models, indicating their reliability. These models will be useful to predict the optimum process parameters, reducing the trial and error of conventional experimentation. The kinetic study was conducted to understand the mechanism of the transesterification process and, lastly, the model could measure the physicochemical properties of the C. manghas biodiesel. [ABSTRACT FROM AUTHOR]