Search

In this study, fluid viscosity effects on LSP performance in terms of boosting pressure were numerically investigated. A water–glycerin mixture with different concentrations corresponding to varying apparent viscosities was flowed through an in-house manufactured LSP under various flow conditions, e.g., changing flow rates, rotational speeds, and fluid viscosities. The pressure increment between the intake and discharge of the LSP was recorded using the differential pressure transducer. The same pump geometries, fluid properties and flow conditions were incorporated into the numerical configurations, where three-dimensional (3D), steady-state, Reynolds-averaged Navier–Stokes (RANS) equations with a standard SST (shear stress transport) turbulence model were solved by a commercial CFD code. With the high-quality poly-hexcore grids, the simulated pressure increment was compared with the corresponding experimental measurement. The internal flow structures and characteristics within the cavities contained by the LSP impeller and diffuser were also analyzed. The good agreement between the numerical results against the experimental data verified the methodology adopted in this study. [ABSTRACT FROM AUTHOR]

Infrared stealth technology plays a vital role in improving the survivability of future aircraft. The exhaust system is the main source of infrared radiation on the rear side of the aircraft, and stealth coating is an effective measure to reduce the infrared radiation on the solid wall of the nozzle. Mature commercial computational fluid dynamics software was used to obtain and analyze accurate data of the flow field to study the infrared radiation characteristics of the stealth coating on the turbofan engine nozzle. Furthermore, infrared simulation software based on the reverse Monte Carlo method, line-by-line calculation technique, and database technology for high-temperature gas parameters of a narrowband model were used to numerically simulate the exhaust system of a turbofan engine with infrared suppression coating. Assuming that the damage percentage of the external adjusting plate is constant, the findings reveal that the overall infrared radiation intensity exhibits a steadily increasing trend with the increase in the number of damaged adjusting plates. The maximum change in the infrared radiation intensity between eight damaged adjusting plates and one damaged adjusting plate was 11.67%. Thus, regular inspection and maintenance are required for the stealth coating on the external adjusting plate of the aero-engine tail nozzle to maintain stealth integrity. [ABSTRACT FROM AUTHOR]

In the oil shale in situ conversion project, it is urgent to solve the problem that the reaction degree of organic matter cannot be determined. The yield and composition of organic products in each stage of the oil shale pyrolysis reaction change regularly, so it is very important to master the process of the pyrolysis reaction and reservoir change for oil shale in situ conversion project. In the in situ conversion project, it is difficult to directly obtain cores through drilling for kerogen maturity testing, and the research on judging the reaction process of subsurface pyrolysis based on the maturity of oil products has not been carried out in-depth. The simulation experiments and geochemical analysis carried out in this study are based on the oil shale of the Nenjiang Formation in the Songliao Basin and the pyrolysis oil samples produced by the in situ conversion project. Additionally, this study aims to clarify the evolution characteristics of maturity parameters such as effective biomarker compounds during the evolution of oil shale pyrolysis hydrocarbon products and fit it with the kerogen maturity in the Nenjiang formation. The response relationship with the pyrolysis process of oil shale is established, and it lays a theoretical foundation for the efficient, economical and stable operation of oil shale in situ conversion projects. [ABSTRACT FROM AUTHOR]

Hybrid DC microgrid clusters contain various types of converters such as BOOST, BUCK, and bidirectional DC/DC converters, making the control strategy complex and difficult to achieve plug-and-play. The common master–slave hierarchical control strategy makes it difficult to achieve accurate and stable system control. This paper proposes an accurate peer-to-peer hierarchical control method for the hybrid DC microgrid cluster, and the working principle of this hierarchical control method is analyzed in detail. The microgrid cluster consists of three sub-microgrids, where sub-microgrid A consists of three BUCK converters, sub-microgrid B consists of three BOOST converters, and sub-microgrid C consists of two bidirectional DC/DC converters. According to all possible operations of various sub-microgrids in the microgrid cluster, the top-, mid-, and bottom-level controls are designed to solve the coordination control problem among different types of sub-microgrids. In this paper, a hybrid microgrid cluster simulation model is built in the PLECS simulation environment, and an experimental hardware platform is designed. The simulation and experiment results verified the accuracy of the proposed control strategy and its fast plug-and-play regulation ability for the system. [ABSTRACT FROM AUTHOR]

In order to weaken the influence of external groundwater on in situ pyrolysis exploitation, the flow characteristics of groundwater were studied according to the oil shale reservoir characteristics of Qingshankou Formation in Songliao Basin, China. In addition, the parameters of marginal gas flooding for water-stopping were optimized. Taking a one-to-one pattern and a five-spot pattern as examples, the characteristics of groundwater flow under the in situ process were studied. Under the one-to-one pattern, the external groundwater flows into the production well from the low-pressure side, and the water yield was basically stable at 1000 kg/d. In the five-spot pattern, the groundwater can flow into the production wells directly from the windward side, and the water yield of the production well on the leeward side mainly comes from the desaturated zone; the water yield of each production well remains at a high level. By setting water-stopping wells around the production well and keeping the gas flooding pressure slightly higher than the production well, the water yield of the production well can be reduced and stabilized within 100 kg/d under gas flooding pressures of 3 and 5 MPa. However, the gas yield of the production well slightly decreased when the gas flooding pressure reduced from 5 to 3 MPa. Therefore, the gas flooding pressure of water-stopping wells shall be determined in combination with the water yield and gas yield, so as to achieve the best process effect. It is expected that the results will provide technical support for large-scale oil shale in situ pyrolysis exploitation. [ABSTRACT FROM AUTHOR]