Search

Based on the magnetic gear effect, the field-modulated permanent-magnet machine (FMPMM) can realize the unequal pole design of the rotor PM field and the stator armature magnetic field. With the advantages of high torque density and high efficiency, the FMPMM has been widely studied in low-speed direct-drive applications. As a kind of machine excited by PMs, the performance of the FMPMM was affected by the demagnetization state. However, the method for establishing the FMPMM demagnetization model based on a finite element analysis (FEA) presented some problems, including tedious repeated modeling work and long calculation time-consuming under fine subdivision. Therefore, in this paper, a six-phase surface-mounted FMPMM was taken as an example, and an equivalent magnetic network (EMN) model was proposed for evaluating the machine performance under demagnetization. In order to realize the rapid establishing EMN models under diverse demagnetization types, the variable coercivity of PM was introduced. Furthermore, for the purpose of improving the calculation accuracy and shortening the calculation time, the least square method was used in fitting and analyzing the discrete results. Then, in order to verify the validity of the proposed EMN model, a prototype was fabricated and a testing platform was built. The air-gap flux density and the no-load back EMF obtained by the FEA, the proposed EMN model, and the experimental testing were compared. The results showed that the proposed EMN model can realize the rapid modeling and accurate analysis of the six-phase surface-mounted FMPMM under diverse demagnetization types. [ABSTRACT FROM AUTHOR]

This paper investigates magnet demagnetization characteristics of the modular permanent magnet machine. The influence of flux gaps on magnet flux density, losses distribution, torque and demagnetization are analyzed for different operating conditions. The magnet demagnetizations caused by three sources, such as the PM field, the armature field, and the magnet temperature rise, are individually investigated using the frozen permeability method. Furthermore, coupled electromagnetic (EM)-thermal modelling is also adopted in this paper to fully reveal the advantages of the modular machine in improving machine EM performances. This is essential due to the temperature-dependent properties of the machines, such as the magnet remanence, coercivity, and copper resistivity. For comparison propose, the EM performances with a particular focus on the demagnetization withstand capability for both the modular and non-modular machines are investigated based on the EM-thermal coupling. It is found that, compared to the non-modular machine, the modular machine can achieve higher torque, higher efficiency, and better demagnetization withstand capability. [ABSTRACT FROM AUTHOR]

This paper presents a new topology of an axial flux-switching memory machine with series-type permanent magnets (SPMs) to improve the flux regulation capability. The key idea was to combine low coercive force (LCF) PMs, which can be magnetized and demagnetized readily, with high coercive force (HCF) PMs in series to provide a variable air-gap magnetic flux. The flux regulating principle and the forward magnetization effect of HCF PMs on LCF PMs are presented and discussed. Based on 3D finite element analysis (FEA), the magnetization variation of LCF PMs and the electromagnetic performances of the machine under different magnetization states were investigated. Simulation results showed that the air-gap magnetic flux could be weakened by up to 45% by using a magnetization current impulse, significantly extending the PM motor's flux-weakening speed range. Finally, a prototype machine was built, and experiments were performed to validate the predictions. The basic experimental validation shows that the measured back-EMF and the flux regulating characteristic matched the 3D FEA results well. [ABSTRACT FROM AUTHOR]

This paper describes a study on the improvement of the dehydration performance of the conventional washing machine model. Recently, as interest in improving the dehydration performance of washing machines has increased, the need for a study on a high-speed electric motor has emerged. However, this conventional spoke-type PMSM has difficulty in speeding up due to the following problems. First, field weakening control is indispensable for high-speed operation of an electric motor. This control method is a big problem in causing torque drop and irreversible demagnetization of the motor. Moreover, the centrifugal force increases during high-speed operation, which adversely affects the stiffness of the motor. Therefore, in this paper, a new rotor shape of spoke-type PMSM was proposed to solve the above problem. [ABSTRACT FROM AUTHOR]