Search

A field survey of indoor environmental measurements and questionnaires on thermal sensation, overall comfort, and behaviors was conducted in four office buildings in Japan by visiting each office every month over a duration of more than a year during the coronavirus disease 2019 (COVID-19) pandemic. The indoor environment was measured concurrently. We obtained 1047 votes from office workers in their 20s to 60s. The regression and Griffiths' methods were used to calculate the indoor comfort temperature. A logistic regression analysis was used to develop the occupant behavior model. Over 70% of the occupants found the indoor environment comfortable at a mean comfort temperature of 23.2 to 25.9 °C. Gender differences were observed in thermal sensation and overall comfort, but a gender difference was observed only in the cooling mode for the indoor comfort temperature. An adaptive model was developed for the office buildings in Nagasaki city to predict the indoor comfort temperature from the outdoor air temperature. The proportions of heating, cooling, and fan usage can be predicted from the outdoor air temperature using a logistic regression analysis. The adaptive model and occupant behavior model are useful for the indoor temperature control of the existing buildings and thermal simulation of the new building design. [ABSTRACT FROM AUTHOR]

Comfort temperature is important to investigate because the chosen office indoor temperatures affect the energy used in a building, and a thermally comfortable environment makes the occupants be more productive. The effects of temperature on comfort are broadly recognized for thermal comfort. Japanese office buildings are well equipped with air-conditioning systems to improve the thermal comfort of the occupants. The main objectives of this research were to compare the winter comfort temperature in mixed mode (MM) and heating, ventilation and air-conditioning (HVAC) office buildings and to investigate the relationship between the comfort temperature and the indoor air temperature. This study measured the thermal environmental conditions of the office buildings and surveyed the thermal comfort of the occupants. The field survey was conducted during winter in seven office buildings located in the Aichi prefecture of Japan. In total, 4466 subjective votes were collected from 46 occupants. The result suggested that the occupants were found to be more satisfied with the thermal environment of MM buildings than that of HVAC office buildings. Overall, 95% of comfort temperatures were in the range 22~28 °C in MM and HVAC buildings, which were higher than the indoor temperature of 20 °C recommended by the Japanese government. The comfort temperature was highly correlated to the indoor air temperature of the MM buildings than to that of HVAC buildings. This indicated that the occupants were more adapted towards the given thermal environment of MM buildings. [ABSTRACT FROM AUTHOR]

A good thermal environment is important in a place where occupants stay for a long time. Since heating a house consumes a lot of energy, an energy-efficient heating method will be required. Then, by combining a heat pump and underfloor heating, there is a possibility that both thermal comfort and energy saving can be achieved. The survey was conducted on a detached house located in Nagano Prefecture, Japan. The average outside air temperature was 4.2 °C. This study investigated the indoor thermal environment, evaluated the operating performance of the heat pump, and calculated the heat load by two-dimensional analysis. More than 80% of the subjects were satisfied with the thermal environment and the neutral temperature was 18.9 °C. In the operation of the heat pump, defrost operation was confirmed, but the average COP was 2.9, and it operated efficiently. In addition, the heat loss from the foundation slab was examined. Proper insulation placement has shown the potential to reduce heat loss. In conclusion, the use of heat pumps as a heat source has been shown to be efficient even in cold climates, and this study supports the construction of new heating methods. [ABSTRACT FROM AUTHOR]