Search

To elucidate the wind-direction dependence of the rotor performance in closely spaced vertical-axis wind turbines, wind-tunnel experiments were performed at a uniform wind velocity. In the experiments, a pair/trio of three-dimensional printed model turbines with a diameter of D = 50 mm was used. The experiments were performed systematically by applying incremental adjustments to the rotor gap g and rotational direction of each rotor and by changing the wind direction. For tandem layouts, the rotational speed of the downwind rotor is 75–80% that of an isolated rotor, even at g/D = 10. For the average rotational speed of the rotor pair, an origin-symmetrical and a line-symmetrical distribution are observed in the co-rotating and inverse-rotating configurations, respectively, thereby demonstrating the wind-direction dependence for the rotor pair. The inverse-rotating trio configuration yields a higher average rotational speed than the co-rotating trio configuration for any rotor spacing under the ideal bidirectional wind conditions. The maximum average rotational speed should be obtained for a wind direction of θ = 0° in the inverse-rotating trio configuration. The wind-direction dependence of the rotational speeds of the three turbines was explained via flow visualization using a smoke-wire method and velocity field study using two-dimensional computational fluid dynamics. [ABSTRACT FROM AUTHOR]

This paper presents the design of a permanent magnet generator for a gearless backyard wind turbine. The magnetisation characteristics of the rotor steel and the stator at different field strength ranges were considered at the design stage and mathematically described using a model in Matlab. The detailed calculations and the design of the planar model were carried out using FEMM software. The high-quality results obtained from the calculations shown in the paper made it possible to make a real model of the generator. This paper presents views of the stator package, the rotor, the entire generator and selected test results. The parameter of this turbine that distinguishes it from a wide range of manufactured generators is its low, non-standard rotational speed and low breakaway torque, which allows the power plant to start in winds of approximately 2 m/s. Other advantages of this generator is its low weight resulting from the use of a light rotor and light alloys for the generator housing. [ABSTRACT FROM AUTHOR]