Search

The pulp and paper industry (PPI) has several opportunities to contribute to meeting prevailing climate targets. It can cut its own CO2 emissions, which currently account for 2% of global industrial fossil CO2 emissions, and it has an opportunity to produce renewable energy, fuels, and materials for other sectors. The purpose of this study is to improve understanding of the decarbonization prospects of the PPI. The study provides insights on the magnitude of needed annual renewal rates for several possible net-zero target years of industrial fossil CO2 emissions in the PPI and discusses decarbonization opportunities, namely, energy and material efficiency improvement, fuel switching, electrification, renewable energy production, carbon capture, and new products. The effects of climate policies on the decarbonization opportunities are critically evaluated to provide an overview of the current and future business environment of the European PPI. The focus is on Europe, but other regions are analyzed briefly to widen the view. The analysis shows that there are no major technical barriers to the fossil-free operation of the PPI, but the sector renovates slowly, and many new opportunities are not implemented on a large scale due to immature technology, poor economic feasibility, or unclear political environment. [ABSTRACT FROM AUTHOR]

The building sector contributes to 40% of the total final energy consumption and 36% of CO2 emissions in Europe, and these are set to increase in the coming years. International directives are pushing towards a decarbonisation roadmap to improve the quality of cities and the health of citizens. Buildings have a potentially central role in terms of energy transition as a means to produce and save energy. Photovoltaic shading devices (PVSDs) protect buildings from direct solar radiation and overheating while producing renewable electricity onsite and increasing the users' thermal comfort. Even though the potential of the PVSD is considerable, the sector is still unexplored, and few studies on the topic are available in the literature. This systematic review aims to present an exhaustive overview of the current literature on state-of-the-art PVSDs by analysing the scientific framework in terms of the status of the research. It presents a performance-based approach focusing on innovative products, PVSD design strategies, and energetic performance in distinct climate conditions and configurations. In particular, 75 articles and about 250 keywords were identified, selected, and analysed. The literature review serves as a basis for further R&D activities led by both the industrial and the academic sectors. [ABSTRACT FROM AUTHOR]

Urban waste heat recovery, in which low temperature heat from urban sources is recovered for use in a district heat network, has a great deal of potential in helping to achieve 2050 climate goals. For example, heat from data centres, metro systems, public sector buildings and waste water treatment plants could be used to supply 10% of Europe's heat demand. Despite this, at present, urban waste heat recovery is not widespread and is an immature technology. Based on interviews with urban waste heat stakeholders, investors interested in green investments, and experience from demonstrator projects, a number of recommendations are made. It is suggested that policy raising awareness of waste heat recovery, encouraging investment and creating a legal framework should be implemented. It is also recommended that pilot projects should be promoted to help demonstrate technical and economic feasibility. A pilot credit facility is suggested aimed at bridging the gap between potential investors and heat recovery projects. [ABSTRACT FROM AUTHOR]

This paper focuses on the possible roles of aggregators in the European electricity markets and the challenges and opportunities they face in participating in different market segments. Demand response (DR) is becoming increasingly important with the growth of renewable energy, and aggregators can play a critical role in balancing supply and demand in real time. This paper provides an overview of prices in electricity markets in which DR aggregators can participate and provides recommendations for aggregators regarding which markets to focus on. However, the regulatory framework for aggregators is still evolving in Europe, creating challenges for them to navigate different market designs, regulatory frameworks, and pricing mechanisms. Through a combination of literature review and data analysis, this paper aims to provide insights for aggregators on how to maximize profits and minimize risks in the European electricity market. The article achieves this by conducting an extensive analysis of various markets, comparing their essential attributes relevant to the functioning of aggregators. [ABSTRACT FROM AUTHOR]

The increase in global average temperature, mainly due to the high rate of greenhouse gas emissions, has triggered severe global warming and climate change. In Europe, the building sector accounts for a significant portion of emissions and energy consumption, prompting attention on nearly-zero-energy buildings (nZEBs) and zero-carbon buildings, as they play a pivotal role in reaching the goal of climate neutrality by 2050. Passive systems offer a promising solution, optimizing energy usage by better adapting buildings to their local climates. This paper reviews the state-of-the-art of passive heating and cooling techniques, exploring their contributions to contemporary architecture and showcasing their features and adaptability across different climates. Furthermore, the link between traditional and bioclimatic architecture is assessed. Recent years have witnessed a surge in publications on bioclimatic solar passive strategies, reflecting an intensified debate on climate change. Europe leads research in this area, aligned with initiatives like the Green Deal and Fit for 55. While dynamic simulation software is widely utilized for energy efficiency analysis, there remains limited integration of Building Information Modeling (BIM) and life cycle analysis (LCA) tools, which could enhance holistic assessments. [ABSTRACT FROM AUTHOR]

This paper presents the Positive Energy District Database (PED DB), a pivotal web tool developed collaboratively by the COST Action 'PED-EU-NET', in alignment with international initiatives such as JPI Urban Europe and IEA EBC Annex 83. The PED DB represents a crucial step towards sharing knowledge, promoting collaboration, reinforcing decision-making, and advancing the understanding of Positive Energy Districts (PEDs) in the pursuit of sustainable urban environments. The PED DB aims to comprehensively map and disseminate information on PEDs across Europe, serving as a dynamic resource for sustainable urban development according to the objective of making the EU climate-neutral by 2050. Indeed, PEDs imply an integrated approach for designing urban areas—the districts—where a cluster of interconnected buildings and energy communities produce net zero greenhouse gas emissions, managing an annual local/regional overflow production of renewable energy. The paper describes the collaborative step-by-step process leading to the PED DB implementation, the current results and potentials of the online platform, and introduces its future developments towards a more user-friendly and stakeholders-tailored tool. The interactive web map offers a customizable visualizations and filters on multiple information related to PED case studies, PED-relevant cases, and PED Labs. Users can access detailed information through a table view, facilitating comparisons across different PED projects and their implementation phase. The paper offers insights and detailed analysis from the initial dataset that includes 23 PED cases and 7 PED-related projects from 13 European countries, highlighting the key characteristics of surveyed PEDs. [ABSTRACT FROM AUTHOR]

This paper describes a new underwater pumped storage hydropower concept (U.PSH) that can store electric energy by using the high water pressure on the seabed or in deep lakes to accomplish the energy transition from fossil to renewable sources. Conventional PSH basically consists of two storage reservoirs (upper and lower lake) at different topographical heights. It needs special topographic conditions, which are only limitedly available in mountain regions. Furthermore, due to the lack of acceptance and the environmental impact, new conventional PSH projects are very unlikely to be built in larger numbers in Europe in the near future. The presented solution solves these issues by placing the storage system on the seabed, thus having other geographical requirements. It operates as follows: in contrast to well-known conventional PSH plants, which use two separated water reservoirs of different heights, the U.PSH concept uses the static pressure of the water column in deep waters by installing a hollow concrete sphere in deep water. Storage of electricity is achieved by using a reversible pump in the hollow sphere. Upon opening a valve, water flows into the sphere, driving a turbine/generator, thereby discharging the storage device. In order to re-charge, the water is pumped out of the sphere against the pressure of the surrounding water. The power and energy, respectively, are proportional to the surrounding water pressure at the seabed. The amount of energy stored depends on the water depth and the volume of the spheres. The spheres need a cable connection to the shore or to a close-by floating transformer station (e.g., an offshore wind plant). No other connections such as pipes are needed. The functional principle of this energy storage technology, its state of the art, its storage capacity and the shape and size of the required spheres are discussed in this paper. [ABSTRACT FROM AUTHOR]

The Renewable Energy Community (REC) in Europe promotes renewable energy sources (RESs), offering social, economic, and environmental benefits. This new entity could alter consumer energy relationships, requiring self-consumption, energy sharing, and full utilization of RESs. Modernizing energy systems within the REC requires addressing self-consumption, energy sharing, demand response, and energy management system initiatives. The paper discusses the role of decentralized energy systems, the scenarios of the REC concept and key aspects, and activities involving energy generation, energy consumption, energy storage systems, energy sharing, and EV technologies. Moreover, the present work highlights the research gap in the existing literature and the necessity of addressing the technological elements. It also highlights that there is no uniform architecture or model for the REC, like in the case of microgrids. Additionally, the present work emphasizes the role and importance of technological elements in RECs, suggesting future recommendations for EMS, DSM, data monitoring and analytics, communication systems, and the software or tools to ensure reliability, efficiency, economic, and environmental measures. The authors also highlight the crucial role of policymakers and relevant policies, which could help in implementing these technological elements and show the importance of the RECs for a sustainable energy shift and transition. [ABSTRACT FROM AUTHOR]

The reduction of energy demand in buildings is one of the key challenges in contemporary construction. To this end, the application of structural and material partitioning solutions that provide a high level of thermal insulation and the employment of technical installations with high energy performance have become widespread. However, there are a number of other factors that can reduce energy demand. These include the optimal use of heat gains from solar radiation. An aspect that is often discussed in the literature is the overheating of buildings due to excessive heat gains from solar radiation. This article is a case study showing the impact of the orientation of a single-family passive house on its heating energy demand. The building under consideration is located in Central Europe. External climate parameters measured directly at the site during experimental examinations were used for the calculations. This paper adopts six calculation options, considering the different orientations of the glazed façade. As the simulations showed, the effect of solar radiation on the energy demand between two extreme options of glazing orientation, that is south and north-facing orientation, reached 4.7% of the annual energy demand for heating, while for the option corresponding to the actual location of the building and the option involving south-facing windows, the difference was 0.3%, respectively. [ABSTRACT FROM AUTHOR]

This paper explores business models for community energy storage (CES) and examines their potential and feasibility at the local level. By leveraging Multi Criteria Decision Making (MCDM) approaches and real-world case studies in Europe and India, it presents insights into CES deployment opportunities, challenges, and best practices. Different business models, including community energy cooperatives, utility–community partnerships, demand response, energy services, and market mechanisms, are analyzed. The proposed method combines the MCDM method PROMETHEE II with the fuzzy set theory to obtain a complete CES business model ranking, addressing project uncertainties. The analysis emphasizes CES's role in balancing local renewable energy supply and demand, facilitating energy sharing, and achieving energy independence. Findings prioritize models like Community Cooperative, Energy Arbitrage, and Energy Arbitrage Peak Shaving for CES with renewables. Environmental benefits include reduced diesel use and greenhouse gas emissions. Efficient cooperatives are advocated to recover costs and enable competitive energy prices. The paper highlights the need for novel value propositions to boost the energy transition in local communities. This research contributes to the discourse on CES business models, fostering knowledge exchange and promoting effective strategies for sustainable energy systems. [ABSTRACT FROM AUTHOR]

The use of economic instruments within environmental policy has become a challenging topic for policymakers, governments and scholars. Environmental taxes have emerged as a prevailing preference in developed countries to promote sustainability. Recently, a particular focus has been given to waste generation and disposal, shifting the attention from greenhouse gases to another important source of environmental pollution. This paper investigates the effect of national environmental taxes and policies on industrial waste. A fixed effects model is used for 34 countries across Europe from 2004 to 2022. The results suggest that environmental taxes and energy policies reduce industrial (hazardous and non-hazardous) waste. However, environmental tax reforms should take into consideration the deterioration in environmental quality, the increase in economic costs and undesirable social consequences. [ABSTRACT FROM AUTHOR]

Instrument transformers are largely used to measure voltages and currents in public electricity networks. Their performance is essential for Power Quality measurements. Tests and procedures to estimate the effect of single influence factors are performed according to current standards. However, the instrument transformers are exposed simultaneously to more than one factor. The standardized procedures for their characterization with combined influence factors are under construction in Europe. The work in this paper is focused on the development of a new set-up for the determination of the accuracy and frequency response of medium-voltage transformers within the combined influence factors of temperatures and vibrations. The test set-up includes a platform for the combination of temperature and vibrations, a generating system for harmonics up to 9 kHz superposed with 35 kV, 50 Hz voltage and a reference measuring system. The results of several tests carried out on a 35 kV/100 V/50 Hz voltage transformer in the presence of these influence factors are discussed in this paper. They show that the accuracy and frequency response of the voltage transformers are more influenced by temperature than by vibrations. [ABSTRACT FROM AUTHOR]

Global energy consumption is growing rapidly, with the frequency and intensity of extreme events constantly increasing, posing a long-term threat to power supply and consumption. Therefore, analyzing the spatiotemporal characteristics of electricity consumption and quantitatively assessing the impact of extreme events on electricity consumption are of great significance. Based on fine-grained electricity consumption data from Europe for the years 2019–2022, this paper employs a data mining perspective and four methods including Z-score, Isolation Forest, Local Outlier Factor, and Autoencoder to detect abnormal electricity consumption during extreme events. Additionally, it combines indicators such as elastic loss, vulnerability, and duration to measure the impact of extreme events on electricity consumption. It is found that low temperatures could lead to abrupt changes in electricity consumption, with Northern Europe being more significantly affected by low temperatures. The COVID-19 pandemic had the most significant impact on electricity consumption in Europe, with the middle part of Europe being the hardest hit during the first wave of the pandemic. Electricity anomalies during the pandemic period were related to national pandemic control policies and exhibited some lag. High temperatures persisted for a longer duration in the middle part of Europe. [ABSTRACT FROM AUTHOR]

Reducing emissions from fluorinated gases (F-gases) is considered one of the key conditions for the European Union (EU) to be able to meet the requirements of the European Green Deal, primary objectives of which are the reduction in greenhouse gas emissions by at least 55% by 2030 compared to 1990 and the gradual transition to net climate neutrality by 2050. To this end, a quota system for hydrofluorocarbons (HFCs) is already in place, introduced through the updated F-Gas Regulation (517/2014). The aim of this paper is to review an innovative scheme currently under development that strongly promotes the Recovery, Recycling and Reuse (3R) of F-gases extracted from the heating, ventilation, air conditioning and refrigeration (HVAC-R) equipment of the building sector, thus offering a sustainable alternative source for refrigerant supplies. Therefore, the basic operating principles of the so-called "3R ECOSYSTEM" are outlined and especially its three main components, which are: the self-certification/self-declaration platform, the F-gas identification and recycling units (prototypes) and the Retradeables marketplace. In addition, an overview of both the demonstration phase and the scheduled replication phase of the 3R ECOSYSTEM is provided, including the estimated impact on carbon dioxide (CO2) savings due to the progressive uptake of the circular use of existing F-gases across Europe. [ABSTRACT FROM AUTHOR]

Due to high electricity prices and possible shortages of gas and other energy commodities, various fluctuations in electricity generation will need to be regulated. Given the increasing expansion of wind power plants in Europe and worldwide. It is necessary and essential to put power regulation into practice, as mandated by regulation 2016/631 EU. A significant power balance problem may arise on the grid, which may lead to cyclical and recurring blackouts in the future. The motivation for this paper is to raise awareness of the controllability of wind turbines and to highlight the gentle pace of research in this area for pitch angle control. Therefore, the chief idea of the paper is to develop a proposal for wind power plant power control by changing the rotor blade rotation, following previous research in this area, and determining the shortcomings and possibilities. The paper provides a numerical method for controlling the power output of a wind power plant, for which an algorithm has been proposed. This control is intended to provide a framework for the design and implementation of a wind power plant control program. Coordination between the multiple sources will fulfil a leading role in smooth power management. [ABSTRACT FROM AUTHOR]

In this paper, a simple model is proposed for predicting the thermal energy requirements of greenhouses in Europe. The model estimates the annual heating requirements and the maximum required heating power, along with the corresponding heating and zero-energy operating periods. It is based on the greenhouse technical data (the overall heat loss coefficient, cover transmission, sensible absorbance), the cultivation conditions (temperature range), and the meteorological data (solar radiation and ambient temperature) according to the site characteristics (longitude and latitude). The model results can be obtained using a hand calculator. The model results are compared with those of a detailed model simulating a greenhouse's thermal performance and they agreed with real data from the literature. Moreover, a model sensitivity analysis revealed the effect of various factors on the greenhouse's energy requirements. The results proved that the most significant factor affecting heating requirements, the maximum heating power, and heating periods is the latitude of the greenhouse site, whereas zero-energy periods are primarily influenced by the plant cultivation temperature range and then by the latitude. According to our findings, in lower latitudes (40 to 50 degrees), heating requirements range from 250 to 430 kWh/m2/y, whereas, in higher latitudes (50 to 60 degrees), heating needs range from 430 to 650 kWh/m2/y. [ABSTRACT FROM AUTHOR]

Over 30% of the world's land area is covered by forests. Approximately 761 million m3 of wood is harvested annually in Europe (2017). The aim of the paper is to assess the amount of wood (biomass) produced in Europe per year, as it determines the amount of carbon dioxide released from wood because of combustion for heating and energy purposes. The circular bioeconomy was applied as the theoretical framework for this study. The study employs official statistics on material flows and also uses a technology assessment, which allows for more precise estimations. It can be estimated that 110 million tons of harvested woody biomass are converted into energy every year. This constitutes nearly 69% of processed wood, with burned wood treated as zero-emission. From the analysis of the compiled results, it can be concluded that, in Europe, more than 50% of the mass of raw wood material harvested per year is used for energy in the first stage of processing by manufacturing industries. These processes produce products that become the raw material for further processing, as a result of which, further amounts of wood biomass are used for energy purposes. [ABSTRACT FROM AUTHOR]

2020 was a key year for several targets in European energy and climate policy, including the requirement for European countries to deploy smart metering for at least 80% of electricity consumers. This target was set to ease the transition towards a consumer-centered and digitalized energy system. In fact, there are numerous applications that are facilitated or are directly linked to smart meters. Among others: demand response programs that enable consumers to be active in the energy market, and remote grid monitoring by the Distribution System Operator. In this paper, we analyze the initial provisions of the Third Energy Package and those of the Clean Energy Package, with particular focus on the recently approved directive on common rules for the internal market for electricity and the newly introduced smart meters specifications. We present the highlights of the national cost–benefit analyses for smart metering roll-out, focusing on the decisions made by the Member States with respect to a potential smart meter roll-out, that was targeted to be completed by 2020 and present the current situation of smart metering roll-out. We also present and categorize some of the R&I smart grid projects realized over recent years, focusing on the ones that deal with smart metering integration in order to depict the smart metering applications and technologies tested on the ground. Therefore, this paper portrays a full picture with respect to smart meters in Europe today and gives insights for monitoring smart metering roll-outs taking into account the current trends in smart metering applications. [ABSTRACT FROM AUTHOR]

Industrial applications of hydrogen are key to the transition towards a sustainable, low-carbon economy. Hydrogen has the potential to decarbonize industrial sectors that currently rely heavily on fossil fuels. Hydrogen, with its unique and versatile properties, has several in-industrial applications that are fundamental for sustainability and energy efficiency, such as the following: (i) chemical industry; (ii) metallurgical sector; (iii) transport; (iv) energy sector; and (v) agrifood sector. The development of a bibliometric analysis of industrial hydrogen applications in Europe is crucial to understand and guide developments in this emerging field. Such an analysis can identify research trends, collaborations between institutions and countries, and the areas of greatest impact and growth. By examining the scientific literature and comparing it with final hydrogen consumption in different regions of Europe, the main actors and technologies that are driving innovation in industrial hydrogen use on the continent can be identified. The results obtained allow for an assessment of the knowledge gaps and technological challenges that need to be addressed to accelerate the uptake of hydrogen in various industrial sectors. This is essential to guide future investments and public policies towards strategic areas that maximize the economic and environmental impact of industrial hydrogen applications in Europe. [ABSTRACT FROM AUTHOR]

To meet the 2050 EU decarbonization goals, there is a need for new and innovative ideas to increase energy efficiency, which includes reducing the energy consumption of buildings and increasing the use of on-site renewable energy sources. One possible solution for achieving efficient thermal energy transition in the building sector is to assign new functionalities to the building envelope. The building envelope can function as a thermal energy storage system, which can help compensate for irregularities in solar energy availability. This can be accomplished by utilizing phase change materials as the energy storage medium in the building envelope. In this paper, two phase change materials with different melting temperatures of 21 °C and 28 °C are compared for their application in a dynamic solar building envelope. Both experimental and numerical studies were conducted within the scope of this study. The laboratory testing involved simulating the conditions of the four seasons through steady-state and dynamic experiments. The performance of the phase change materials was evaluated using a small-scale PASLINK test stand that imitates indoor and outdoor conditions. A numerical model of a small-scale building envelope was created using data from laboratory tests. The purpose of this model was to investigate how the tested phase change materials perform under different climate conditions. The experimental findings show that RT21HC is better at storing thermal energy in the PCM and releasing it into the indoor area than RT28HC. On the other hand, the numerical simulation results demonstrate that RT28HC has an advantage in terms of thermal storage capacity in climates found in Southern Europe, as it prevents overheating of the room. [ABSTRACT FROM AUTHOR]

Over the last two decades, the tidal energy industry has laid the groundwork for creating commercially viable tidal power generation projects to strengthen sustainable energy policies around the world. At the end of 2021, the cumulative installation of tidal stream technology that has been deployed in Europe reached 30.2 MW, where the majority of the installations are by small and medium-sized companies. Due to a growing demand among investors related to the global tidal energy industry, the reliability and safety of operational-stage tidal energy systems' components are becoming increasingly important. In this context, companies, universities and research institutes are focusing on conducting large- and small-scale tests of tidal turbine elements to validate their projected design life, and major attention is being given to assessing the structural integrity of turbine blades. This review paper focuses on structural tests that have been reported for axial flow tidal turbine blades manufactured using composite materials around the world, highlighting the testing standards, equipment and instrumentation required. Overall, this review article discusses the state of the art in the structural testing of tidal turbine blades. In addition, it highlights the global concerns and research gaps to ensure the long-term sustainability of axial flow tidal turbine blades. In addition, the information contained in this article will be useful for formulating a smooth and reliable mechanism to enhance the evaluation process of the structural properties of tidal turbine blades in the future. [ABSTRACT FROM AUTHOR]

Internal Combustion Engines (ICE) are experiencing a transition era in which research and innovation are mainly pushed by environmental issues: emission reduction and fuel saving are indispensable requirements of the new technologies, otherwise the end of ICE is proposed in Europe. Modifications, in reality, are under discussion by 2026 but the environmental issues are anyway welcomed. In the transportation sector, today dominated by ICEs, it appears that the reduction in the propulsion power, hybridization at various degrees, and exhaust post-treatment improvements will guarantee technological solutions able to support the transition in the next couple of decades toward full electric propulsion. Waste Heat Recovery (WHR) is a very interesting opportunity since almost two-thirds of fuel energy is not converted into mechanically useful energy. Moreover, the integration with other thermal streams on board (cooling and lubricating mediums, EGR cooling) can add further value to the recovery opportunity as well as the concept of managing the engine thermal management which can produce a sensible contribution that is appreciated mainly during urban driving. A huge scientific effort is underway, and a great expectation is perceptible. More generally, the technological options that can achieve a reduction in overall fuel consumption and, thus, the improvement of global engine efficiency, are the most valuable when they can be introduced without massive changes to the engine layout. This happens in all the energy applications in which ICEs are involved since the recovery unit can be introduced in the exhaust line. The mechanical energy recovered can be easily transformed into electrical energy, so represents an interesting integration with the hybrid propulsion powertrains. In this paper, a review of the most important technologies referred to the WHR is presented, outlining advantages and drawbacks, and setting up the presently available technologies referred to the transportation sector. [ABSTRACT FROM AUTHOR]

Renewable energy sources (RESs) and electricity demand are not evenly distributed geographically across Europe. Thus, harvesting the wind energy from the north and solar energy from the south and delivering them to the demand in central Europe is a more viable solution. However, the present High-voltage alternating current (HVAC) transmission grids have been sometimes congested; thus, High-voltage direct current (HVDC) provides another possibility along the existing HVAC infrastructure. In this paper, we propose a hybrid HVAC-HVDC grid, allowing a large penetration of concentrated RES in Europe and North Africa. More specifically, the HVDC network is constructed to transfer wind and hydro electricity from northwestern Europe and solar electricity from north Africa, while the HVAC network is used to distribute electricity within each country or among adjacent areas. To quantitatively evaluate the feasibility and relevant performances, multiple dimensions of indicators are designed. Employing several European energy scenarios up to 2050, the performances of the proposed HVAC-HVDC infrastructure are analyzed and compared. The calculation results show that compared with the pure HVAC grid, the integrated HVAC-HVDC grid can significantly reduce greenhouse gas emissions and pollutants, leading to a further reduction in the number of deaths from air pollution. In addition, the HVAC-HVDC grids can accommodate a higher penetration of RES without causing infeasible power flows. [ABSTRACT FROM AUTHOR]

Analyzing data from the Energy Poverty Observatory in Europe, it emerges that more than 50 million households in the EU live in energy poverty (people that cannot heat their homes during winter; cannot make their homes comfortable during the summer; pay their energy bills late). Research studies realized in the last 20 years highlight that making energy demand efficient and effective is the more significant and socially important the more it is able to involve users who are unable to sustain energy demand. The evolution of the research sees a narrowing of the field of investigation by focusing on the user dimension of energy poverty, stressing the role of citizens not only as consumer but also as producers of solutions to tackle energy poverty, real energy communities of agents. The paper aims to provide a systematic literature review highlighting the major findings of the topic, investigating the relationship between spatial and social issues, and looking at the state of energy poverty by addressing the profiling of users and consequently of services useful to overcome their current vulnerable condition. The paper is structured in two core sections. The first one gives the results of a systematic literature review on the energy/fuel poverty topic, the second one deepens the role of communities and individuals need, crucial in defining new design approaches for supportive solutions to tackle energy poverty. [ABSTRACT FROM AUTHOR]

This editorial paper tackles the issue of the consumer attitudes toward energy reduction and changing energy consumption behaviors. This topic is of special relevance today as Europe faces an unprecedented energy crisis as a result of diverting from Russian supplies of oil and gas due to the war in Ukraine. For many years now, Europe has relied upon cheap and affordable Russian oil and gas (in fact, the European Green Deal and the strategy for the decarbonization of the economy by 2030 were indirectly based on it), but the transition to the renewable future now appears to be jeopardized. As energy prices are soaring globally, it is not yet clear whether this would have an effect on significantly changing consumer behavior and increasing energy efficiency and security as many consumers are reluctant to change their old habits and are used to having their energy on demand and for any possible occasion. However, changing energy consumption behaviors would be beneficial not only for handling the current energy crisis but also for setting the long-term trends with respect to energy saving, which is crucial for fighting global warming and climate change while sustaining economic growth. [ABSTRACT FROM AUTHOR]

This paper presents a comparative analysis of various capacity mechanisms that are either in force or under approval in key countries/regions in Europe and the US. A detailed analysis on the necessities that led to the establishment of the capacity mechanisms, along with various fundamental technical and operational features associated with the design and operation of different capacity mechanisms, mainly in Europe (Italy, France, Germany, Belgium, Poland, Great Britain, Ireland, Cyprus) and complementarily in the US (PJM, New England), are presented. This analysis is complemented by a real-life application regarding the long-term capacity remuneration mechanism that is expected to be established in Greece in the near future. A detailed simulation of the envisaged capacity mechanism auctions under differentiated scenarios has been performed, regarding the future Greek power system operating conditions during the forthcoming decade (2022–2031). Test results illustrate that the outcome of the auctions is heavily dependent on the future energy generation mix and the market participants' bidding strategy. Whereas, the total cost that will have to be undertaken by the electricity supply companies and, ultimately, by the end-consumers for the financing of the proposed capacity mechanism lies in the range of 5.5–8.7 €/MWh for the entire study period. [ABSTRACT FROM AUTHOR]

Every type of agricultural production is a burden for the natural environment. The paper's objective is to assess the energy use efficiency, GHG emissions, and provide an economic analysis of buckwheat production for Central Europe (Poland). The analysis and comparison involved two production systems: low-input and high-input ones. The experiment involved three varieties of buckwheat, Panda, Volma, and Mancan. The yields for analysis were obtained from the field experiment which was set up in 3k-p fractional design was applied in two replications in which at the same time five factors were tested (A—variety, B—mineral fertilisation, C—sowing rate, D—weed control, E—growth regulator). A quartile was used as a statistical tool to select production systems. A high-input buckwheat production regime required, on average, 74.00% more energy than a low-input system. The total mean energy input for three varieties ranged from 7532.7 to 13,106.9 MJ ha−1 for low- and high-input systems, respectively. The results show that the energy use efficiency, specific energy, and net energy gain for the low-input system were on average 1.51, 9.6 MJ kg−1, and 3878.8 MJ ha−1, respectively, for the investigated varieties. For the high-input system, it was 1.35, 10.9 MJ kg−1, 4529.9 MJ ha−1, respectively. The total CO2 equivalent emissions during buckwheat production were higher for the high-input system than for the low-input system by more than 40%. The economic analysis demonstrated that the high-input system had better economic efficiency (without EU payment), 1.01 on average, than the low-input system, 1.07 on average. The international literature does not offer research on energy analysis for the production of common buckwheat and GHG emissions. The findings of this study demonstrate how the production systems affect energy and economic efficiency as well as GHG emissions. The authors suggest further research in Europe and globally, particularly on the energy use efficiency and GHG emissions in the production of common buckwheat, to verify the present results and improve production technologies (reduce inputs and costs). [ABSTRACT FROM AUTHOR]

This paper analyses decarbonisation scenarios for the European passenger car fleet in 2050. The scenarios have been developed using the backcasting approach and aim to reduce greenhouse gas (GHG) emissions of passenger cars to a level defined in the Transport White paper that is 60% below 1990 levels. Considering the emission levels of 2010, a yearly reduction of 1.7% is required in order to achieve the target. Car emissions were decomposed into the main emission factors of mobility, efficiency and carbon intensity. How these factors change over time depends on various external factors: the pace of technological improvements, the future role of cars in society’s mobility system and the priority given to decarbonising energy demand. The analysis showed that if car mobility and ownership continue to increase as expected in a ‘business as usual’ case, a share of 97% plug-in hybrid or battery electric vehicles might be required by 2050, together with a substantial decrease in greenhouse gas emission from electricity production. A transition to more advanced car technology such as automated driving, advanced batteries or lightweight materials in vehicle production would raise vehicle efficiency. Should car mobility continue at a high level, an early technology transition will be required. [ABSTRACT FROM AUTHOR]

Future power production in Europe is expected to include large shares of variable wind and solar power production. Norway, with approximately half of the hydropower reservoir capacity in Europe, can contribute to balance the variability. The aim of this paper is to assess how such a role may impact the Norwegian hydropower system in terms of production pattern of the plants, changes in reservoir level and water values. The study uses a stochastic optimization and simulation model and analyses an eHighway2050 scenario combined with increases in the hydropower production capacities in Norway. The capacity increases from ca. 31 GW in the present system to 42 and 50 GW respectively. The study uses 75 years with stochastic wind, solar radiation, temperature and inflow data. The results show that the hydropower system is able to partly balance the variable production and significantly reduce the power prices for the analyzed case. The paper shows that some of the power plants utilize their increased capacity, while other plants do not due to hydrological constraints and model limitations. The paper discusses how the modelling can be further improved in order to quantify more of the potential impacts on the future power system. [ABSTRACT FROM AUTHOR]

One quarter of global energy consumption goes towards meeting transport needs. In Europe, the share of energy for transport is much higher and accounts for about a third. Therefore, it is very important to monitor the sustainable development and progress of the sector. This paper seeks to develop a framework for the sustainability assessment of road transport in EU countries and to evaluate the countries' achievements in the last decade. The research adheres to the provision that the developed framework should be easily applied in future studies. Therefore, significant attention is paid to the selection of indicators and their availability, as well as the selection of the research instrument itself. The multi-criteria decision-making (MCDM) technique TOPSIS has been applied for calculations and countries' ranking, in order to compare countries' achievements in the last decade (2010–2020). The last ten years' analysis allows us to identify the direction of individual countries in developing road transport. [ABSTRACT FROM AUTHOR]

To meet the target of reducing greenhouse gas emissions, hydrogen as a carbon-free fuel is expected to play a major role in future energy supplies. A challenge with hydrogen is its low density and volumetric energy value, meaning that large tanks are needed to store and transport it. By injecting hydrogen into the natural gas network, the transportation issue could be solved if the hydrogen–natural gas mixture satisfies the grid gas quality requirements set by legislation and standards. The end consumers usually have stricter limitations on the gas quality than the grid, where Euromot, the European association of internal combustion engine manufacturers, has specific requirements on the parameters: the methane number and Wobbe index. This paper analyses how much hydrogen can be added into the natural gas grid to fulfil Euromot's requirements. An average gas composition was calculated based on the most common ones in Europe in 2021, and the results show that 13.4% hydrogen can be mixed with a gas consisting of 95.1% methane, 3.2% ethane, 0.7% propane, 0.3% butane, 0.3% carbon dioxide, and 0.5% nitrogen. The suggested gas composition indicates for engine manufacturers how much hydrogen can be added into the gas to be suitable for their engines. [ABSTRACT FROM AUTHOR]

Nowadays, there is an urgent necessity for breakthrough technologies able to reduce process complexity and to lower costs to make the biomass-based biodiesel supply chain competitive. This paper presents an innovative methodology for the identification of secondary biomass potentials for biofuel production. The methodology, divided into four steps, defines the criteria that allow identification of promising scenarios of biomass supply chains for commercial application of innovative technologies. The model set up a scoring procedure based on carbon emission avoidance, efficient resource exploitation and sustainability indexes. Applying the four levels of analysis (biomass availability, suitability analysis, regionalization and multi-criteria analysis), the cereal straw supply chains in four European districts (Scandinavian, Hanseatic, Central European and Mediterranean) have been identified and grouped in 18 biomass supply regional clusters (BSRCs). The clusters represent the most promising hotspots where biomass availability, logistics and feedstock requirements for a novel conversion technology meet. Central European and Mediterranean districts are those with the highest cereal straw bioeconomic potentials which allow mono-feedstock supply chains and relatively high capacity of a conversion technology at 200 MWth and beyond. Central Europe has an overall bioeconomic potential of 16.249 kt (232.359 TJ) distributed over 36 regions and organized in 12 BSRCs. The Mediterranean district has an overall bioeconomic potential of 3541 kt (50.630 TJ) distributed over nine regions and organized in four BSRCs. [ABSTRACT FROM AUTHOR]

An underappreciated source of renewable energy is wastewater, both municipal and industrial, with global production exceeding 900 km3 a year. Wastewater is currently perceived as a waste that needs to be treated via energy-consuming processes. However, in the current environmental nexus, traditional wastewater treatment uses 1700–5100 TWh of energy on a global scale. The application of modern and innovative treatment techniques, such as microbial fuel cells (MFC), would allow the conversion of wastewater's chemical energy into electricity without external energy input. It has been demonstrated that the chemically bound energy in globally produced wastewater exceeds 2.5 × 104 TWh, which is sufficient to meet Europe's annual energy demand. The aim of this paper is to answer the following questions. How much energy is bound in municipal and industrial wastewaters? How much of that energy can be extracted? What benefits will result from alternative techniques of waste treatment? The main finding of this report is that currently achieved energy recovery efficiencies with the use of microbial fuel cells technology can save about 20% of the chemical energy bound in wastewater, which is 5000 TWh on a global scale. The recovery of energy from wastewater via MFC technology can reach as much as 15% of global energy demands. [ABSTRACT FROM AUTHOR]

The objective of this paper is to investigate the cause of several unexpected high amplitude oscillations that occurred in the surge tank water level of a real hydropower plant during secondary load-frequency control (LFC) maneuvers, after the replacement of the turbine runner, and to propose solutions that allow the power plant to continue providing secondary LFC in a safe and reliable manner. For this purpose, a simulation model has been developed and calibrated from data gathered during several on-site tests. Two different solutions are proposed in order to cope with the observed problem: using a state-dependent load change rate limiter or modifying the hydro turbine governor gains; the turbine governor remains the same as before the runner replacement. The proposed solutions are tested against a set of realistic secondary LFC signals by means of simulations and compared to each other as a function of the probability that the surge tank water level descends below a minimum safe level and the quality of the secondary LFC response. The results presented in the paper demonstrate the validity of the methodology proposed to determine the state-dependent ramp limit, as well as its effectiveness to prevent the surge tank drawdown and to provide clear insight into the trade-off between response quality and power plant safety. [ABSTRACT FROM AUTHOR]

The positive energy district (PED) is a rather recent concept that aims to contribute to the main objectives of the Energy Union strategy. It is based on an integrated multi-sectoral approach in response to Europe's most complex challenges. But to what extent have its development and implementation been supported by research and innovation programs? And what is the state of the art of its implementation and effective penetration into the current energy systems of European cities, according to the evidence provided by the scientific literature? This study aims to investigate these issues, providing a critical overview of the PED situation by means of a systematic literature review based on the use of open-access bibliometric software supplemented with content analysis. The results show that less than half of the documents analyzed refer to actual case studies, 80% of which were funded as part of research projects. This seems to lead to the conclusion that although PEDs have been strongly encouraged by the scientific community and policy initiatives at the European level, their implementation in cities is still limited. Moreover, an uneven distribution among countries can be observed. To overcome the existing barriers to PED diffusion and implementation, it would be useful to provide more ad hoc funding and, above all, facilitate its accessibility also by municipalities not yet well integrated into European projects, initiatives, and networks. [ABSTRACT FROM AUTHOR]

Decarbonizing heating in buildings is a key part of climate change mitigation policies, but deep retrofit is progressing slowly, e.g., at a pace of 0.2%/y of the building stock in Europe. By means of tests in two flats of a multiapartment housing complex recently renovated to very low values of energy needs, this paper explores the role of deep retrofitted buildings in providing energy flexibility services for the occupants/owners/managers and for the energy system. Key to this flexibility increase and capacity savings is the large reduction of energy needs for heating via a high level of external insulation, which allows the thermal capacity of the building mass to act as an energy storage, without the large energy losses presently affecting a large part of the building stock. Due to the limited number of case studies reporting experimental applications in real buildings, this research aims to offer an analysis based on a series of tests and detailed monitoring which show a significant increase in the time interval during which the low-energy-needs building remains in the comfort range, compared to a high-energy-needs building, when active delivery of energy is deactivated during the heating season. Intermittent renewable energy might hence be stored when available, thus enhancing the ability of the energy system to manage inherent variability of some renewable energy sources and/or increasing the share of the self-consumption of locally generated RES energy. Besides, two unplanned heating power outages which have involved the entire building complex allowed us to verify that deep retrofitted buildings are able to maintain thermally safe indoor conditions under extreme events, such as a power outage, for at least 5 days. [ABSTRACT FROM AUTHOR]

Offshore wind turbine drive train technology is evolving as developers increase size, aim to maximise availability and adapt to changing electricity grid requirements. This work first of all explores offshore technology market trends observed in Europe, providing a comprehensive overview of installed and planned capacity, showing a clear shift from smaller high-speed geared machines to larger direct-drive machines. To examine the implications of this shift in technology on reliability, stop rates for direct-drive and gear-driven turbines are compared between 39 farms across Europe and South America. This showed several key similarities between configurations, with the electrical system contributing to largest amount of turbine downtime in either case. When considering overall downtime across all components, the direct-drive machine had the highest value, which could be mainly attributed to comparatively higher downtime associated with the electrical, generator and control systems. For this study, downtime related to the gearbox and generator of the gear-driven turbine was calculated at approximately half of that of the direct-drive generator downtime. Finally, from a perspective of both reliability and fault diagnostics at component level, it is important to understand the key similarities and differences that would allow lessons learned on older technology to be adapted and transferred to newer models. This work presents a framework for assessing diagnostic models published in the literature, more specifically whether a particular failure mode and required input data will transfer well between geared and direct-drive machines. Results from 35 models found in the literature shows that the most transferable diagnostic models relate to the hydraulic, pitch and yaw systems, while the least transferable models relate to the gearbox. Faults associated with the generator, shafts and bearings are failure mode specific, but generally require some level of modification to adapt features to available data. [ABSTRACT FROM AUTHOR]

This paper analyzes the potential for deep renovation of an apartment building to the level of a passive house in different contexts in the continental part of Europe. The examined variables include different local climatic conditions, levels of economic development, and levels of market development (energy prices, energy footprint, labor prices, etc.) as well as different energy efficiency retrofit scenarios in four different countries. The adequate methodology was developed here in order to obtain an optimal solution for deep renovation in each context. The proposed methodology was based on the interaction of energy simulation and mathematical optimization. In this model, the energy performances of a building are determined with the EnergyPlus package and the optimal solution was obtained by using a mixed-integer non-linear programming model. The results demonstrate that the optimal solution for each analyzed location cannot provide cost-effectiveness over the lifetime of a building, so the introduction of additional subsidies or incentives, such as carbon taxes and upfront subsidies, is necessary. [ABSTRACT FROM AUTHOR]

This paper presents a pre-normative roadmap that foresees the developments in the charging of heavy-duty electric vehicles (HD-EVs). It supports and facilitates the future standardization efforts of charging technologies by creating an overview of the popularity of charging technologies and the end users' needs. The required input for the work was collected using a comprehensive investigation on the available charging technologies and their standardization, reviewing the existing roadmaps and research work, and conducting surveys and interviews of end users and technical stakeholders. According to the findings, a pantograph on the roof of a vehicle and plug-based charging are currently the most used charging interfaces. This trend is likely to continue in the future, since (1) pantographs on vehicle roofs, (2) pantographs on infrastructure, and (3) plugs were graded as charging interfaces with the highest potential by the participants of the technical survey. Static and conductive charging technologies show more potential than dynamic and wireless charging technologies. Nevertheless, inductive charging may be a future charging solution for HD-EVs if the current bottlenecks in the technology can be addressed. These bottlenecks include high prices, slightly lower efficiency, lack of standardization, the maximum achievable power, and safety concerns. Furthermore, interoperability was repeatedly mentioned as the main challenge for today's charging technologies. [ABSTRACT FROM AUTHOR]

Accounting for nearly 40% of final energy consumption, buildings are central to European energy policy. The Directive on Energy Performance of Buildings establishes a benchmarking system known as cost-optimality to set minimum energy performance requirements in new and existing buildings. This paper applies the cost-optimal methodology to an existing structure located in the Mediterranean area (Southern Italy). The building is composed of two units that have been considered for different uses: hotel and multi-residential. Several energy efficiency and renewable measures have been implemented both individually and as part of packages of measures. The cost-optimal solution has been identified as able to optimize energy consumption and costs from financial and macroeconomic perspectives. The first reference building (hotel use) shows a maximum reduction of primary energy and CO2 emission of about 42%, falling within the CasaClima energy class D, while the second reference building (residential use) achieves a value of 88% for primary energy and 85% for CO2 emissions, falling into class B. Thermal dispersions through the envelope can be limited using a suitable combination of insulating materials while a variety of technical variants are selected, such as VRF (variant refrigerant flow) systems, heat pumps with fan coils associated with controlled mechanical ventilation, solar thermal and photovoltaic. This paper illustrates the development of energy retrofit projects, in order to reach a balance between efficiency measures and costs for a building having two different uses, providing guidance to similar case studies related to a warm climate. [ABSTRACT FROM AUTHOR]

The share of industry in final global energy consumption was more than 30% in 2020, of which, the hard-to-abate sectors accounted for almost 60% of total final consumption in industry. Similarly, in Europe, industry accounts for around 25% of final energy consumption. In order to reduce the impact of industry in energy consumption and greenhouse gas emissions, Europe has set many policies that support and regulate the sector, including pricing carbon emissions in a cap-and-trade scheme called the European Emission Trading Scheme (EU ETS). According to the EU ETS, in 2021 the verified emissions of all stationary installations were around 1.3 billion tons of carbon dioxide equivalent emissions. In 2021, the total allocated allowances amounted to around 1 billion tons of carbon dioxide equivalent emissions, half of which were freely allocated. After reviewing the existing modeling approaches for industrial clusters and the available datasets, and assessing the energy consumption and carbon dioxide emissions at plant level using a geographical information system approach (GIS), a taxonomy for industrial cluster decarbonization was introduced. This taxonomy shows that describing industry as sets of clustered installations rather than based on the conventional sectoral economic classification provides more insights into energy transition. First, the cluster description provides a more accurate techno-economic assessment based on a finer characterization of economies of scale compared to traditional energy systems models. Second, the industrial clustering approach may more realistically show the feasibility, in addition to the costs and benefits from coupling industry with transport (e.g., industrial fleets and logistics) or buildings (e.g., city scale), due to a more detailed representation of the energy sources and sinks. [ABSTRACT FROM AUTHOR]

Nuclear energy is presently the single major low-carbon electricity source in Europe and is overall expected to maintain (perhaps eventually even increase) its current installed power from now to 2045. Long-term operation (LTO) is a reality in essentially all nuclear European countries, even when planning to phase out. New builds are planned. Moreover, several European countries, including non-nuclear or phasing out ones, have interests in next generation nuclear systems. In this framework, materials and material science play a crucial role towards safer, more efficient, more economical and overall more sustainable nuclear energy. This paper proposes a research agenda that combines modern digital technologies with materials science practices to pursue a change of paradigm that promotes innovation, equally serving the different nuclear energy interests and positions throughout Europe. This paper chooses to overview structural and fuel materials used in current generation reactors, as well as their wider spectrum for next generation reactors, summarising the relevant issues. Next, it describes the materials science approaches that are common to any nuclear materials (including classes that are not addressed here, such as concrete, polymers and functional materials), identifying for each of them a research agenda goal. It is concluded that among these goals are the development of structured materials qualification test-beds and materials acceleration platforms (MAPs) for materials that operate under harsh conditions. Another goal is the development of multi-parameter-based approaches for materials health monitoring based on different non-destructive examination and testing (NDE&T) techniques. Hybrid models that suitably combine physics-based and data-driven approaches for materials behaviour prediction can valuably support these developments, together with the creation and population of a centralised, "smart" database for nuclear materials. [ABSTRACT FROM AUTHOR]

Building a hydrogen economy is perceived as a way to achieve the decarbonization goals set out in the Paris Agreement to limit global warming, as well as to meet the goals resulting from the European Green Deal for the decarbonization of Europe. This article presents a literature review of various aspects of this economy. The full added value chain of hydrogen was analyzed, from its production through to storage, transport, distribution and use in various economic sectors. The current state of knowledge about hydrogen is presented, with particular emphasis on its features that may determine the positives and negatives of its development. It was noted that although hydrogen has been known for many years, its production methods are mainly related to fossil fuels, which result in greenhouse gas emissions. The area of interest of modern science is limited to green hydrogen, produced as a result of electrolysis from electricity produced from renewable energy sources. The development of a clean hydrogen economy is limited by many factors, the most important of which are the excessive costs of producing clean hydrogen. Research and development on all elements of the hydrogen production and use chain is necessary to contribute to increasing the scale of production and use of this raw material and thus reducing costs as a result of the efficiencies of scale and experience gained. The development of the hydrogen economy will be related to the development of the hydrogen trade, and the centers of this trade will differ significantly from the current centers of energy carrier trade. [ABSTRACT FROM AUTHOR]

As the regulations and consumer preferences in Europe tend to favor more energy-efficient household appliances, companies have to find innovative ways of saving electric energy during the operations of those appliances. One such method in dishwasher design is to reduce heat energy loss to the surrounding environment and reuse heat energy during the washing cycle, thus minimizing the time that heaters are operating. In this study, a numerical simulation involving computational fluid dynamics is implemented to speed up the iterative process of improving efficiency. The washing cycle has been simplified to include only the most critical moments of dishwasher work, and non-important components have been excluded. A workflow of simulations and numerical methods employed for this task is presented. The numerical simulations are compared with real-life experiments to assess their accuracy and verify boundary conditions. Geometric and washing cycle improvements are compared with the base design and show satisfactory results. [ABSTRACT FROM AUTHOR]

This paper studies the change in Energy Intensity (EI) of the main economic activities in the EU15 countries, which represents approximately 45% of their final energy consumption. The purpose is, first, to measure the different patterns between the countries by establishing differentiated typologies, and second, to investigate those reasons that explain the different trends by country. To attain our objective, the changes in EI are decomposed into their structural and efficiency components for EU15 countries for the period 1991-2005. Results reveal four different typologies for this set of countries, and show the importance of identifying those economic activities which, due to their special impact, are key to reducing energy consumption. The changes in the structural component are due mainly to a transformative process in which the importance of industry in the economy as a whole drops, while the opposite holds for services. However, the changes in the efficiency component do not seem to be linked to this same process. It does not appear as though the services sector resulted in a more efficient use of final energy. We have detected significant evidence of convergence for EI in the service sector that would help to understand the recent worsen evolution of EI in this sector (and in overall EI) of Southern European countries. It can also be concluded that an analysis of global EI change without distinguishing among its components can result in misleading conclusions and in improperly conceived Energy Policies. [ABSTRACT FROM AUTHOR]

Energy communities (ECs), intended as collective action initiatives in the energy field involving citizens' participation, have been gaining relevance for the past decades as an alternative way to organize the energy chain to challenge the incumbent system. With Europe's recently adopted Clean Energy Package, ECs found a formal recognition by the European Union as potential actors of the transition of the energy system towards a wider and more decentralized use of renewable sources. Although the potential role of ECs in the transition is therefore hardly questionable, a thorough comprehension of the enabling factors that might foster their diffusion and scaling up is still lacking. Through a comparative analysis of the evolutionary trajectories in six EU countries regarding their energy systems, their regulatory frameworks and their historical evolution of ECs, namely through the example of cooperative models, this paper aims at providing some preliminary evidence about the factors and dynamics that seem to have played, and may play, a role in hampering or facilitating EC model diffusion. Attention is therefore specifically paid to three dimensions of analysis referring to: the energy mix and market structure; the institutional and policy landscape; the wider social attitudes towards environmental issues and cooperation among citizens. In addition to providing a wide comparison of different EU countries, the paper shows that the historical evolution pathways have to be carefully taken into account to understand what might trigger ECs exploitation in the EU. [ABSTRACT FROM AUTHOR]

Renewable energy has a crucial role in facing climate change. One promising strategy is the creation of energy communities that require active involvement from a bottom-up perspective. Their implementation is difficult, as they currently rely on local policies, community readiness, and technological availability. The objective of this paper is to provide a qualitative overview of energy community concepts and strategies at the European level. The aim is to identify common approaches that are framing the development of energy communities, and to understand the most successful steps leading to their creation and growth. To achieve this objective, a threefold methodology is provided: (1) an updated review on policies dealing with energy communities at the European and Italian level; (2) a qualitative overview of European-funded projects under the Horizon 2020 work program; and (3) a qualitative overview of some of the most successful existing energy communities in Europe. The results outline a series of considerations and lessons learned that are useful for implementing this transition pathway in a real case, which is also presented in the paper. The conclusions will identify some future directions of this research, particularly in relation to the results coming from the implementation of actions in the real case. [ABSTRACT FROM AUTHOR]

Due to the energy transformation in buildings, the proportions of energy consumption for heating, ventilation and domestic hot water preparation (DHW) have changed. The latter component can now play a significant role, not only in the context of the annual heat demand, but also in the context of selecting the peak power of the heat source. In this paper, the comparison of chosen methods for its calculation is presented. The results show that for contemporary residential buildings, the peak power for DHW preparation can achieve the same or higher value as the peak power for heating and ventilation. For this reason, nowadays the correct selection of the peak power of a heat source for DHW purposes becomes more important, especially if it uses renewable energy sources, because it affects its size and so the investment cost and economic efficiency. It is also indicated that in modern buildings, mainly accumulative systems with hot water storage tanks should be taken into account because they are less sensitive to design errors (wrongly selected peak value in the context of the uncertainty of hot water consumption) and because they result in acceptable value of peak power for DHW in comparison to heating and ventilation. [ABSTRACT FROM AUTHOR]

The power-to-methane technology is promising for long-term, high-capacity energy storage. Currently, there are two different industrial-scale methanation methods: the chemical one (based on the Sabatier reaction) and the biological one (using microorganisms for the conversion). The second method can be used not only to methanize the mixture of pure hydrogen and carbon dioxide but also to methanize the hydrogen and carbon dioxide content of low-quality gases, such as biogas or deponia gas, enriching them to natural gas quality; therefore, the applicability of biomethanation is very wide. In this paper, we present an overview of the existing and planned industrial-scale biomethanation facilities in Europe, as well as review the facilities closed in recent years after successful operation in the light of the scientific and socioeconomic context. To outline key directions for further developments, this paper interconnects biomethanation projects with the competitiveness of the energy sector in Europe for the first time in the literature. The results show that future projects should have an integrative view of electrolysis and biomethanation, as well as hydrogen storage and utilization with carbon capture and utilization (HSU&CCU) to increase sectoral competitiveness by enhanced decarbonization. [ABSTRACT FROM AUTHOR]

The current European energy policies have an influence on the need to rehabilitate the housing stock in order to meet the objectives of the European Union. Most of this housing stock was built without any type of energy regulation in adverse technical and economic conditions and thus is now energetically obsolete. The major rehabilitation effort required must be approached through actions based on previous quantitative energy knowledge of the existing buildings in order to guarantee the efficiency of energy-retrofitted solutions. This assessment can be carried out through monitoring dwellings conditioned by use patterns; through simulation programs, which do not usually offer faithful representations of energy conditions; or by using test cells, which allow us to evaluate a controlled indoor environment without the influence of users. The objective of this paper is to present the design and performance of test cells as an experimental method for vertical facade analysis in order to tackle the problem of retrofitting residential buildings in a Mediterranean climate, taking into account energy and environment. With this equipment, efficiency and energy savings, as well as illumination and interior air quality, can be simultaneously and comprehensively evaluated. [ABSTRACT FROM AUTHOR]