Search

Rising population levels exert significant pressure on available freshwater resources. Scientists and researchers from various countries are diligently seeking a long-lasting solution using solar-powered desalination. This research paper investigates the current advancements in solar desalination research by utilizing the method of "scientometrics". Scientometrics employs traditional methodologies, including bibliometrics, which entails quantifying the number of research papers published, and citation analysis, which involves examining the frequency with which other researchers cite these papers. By integrating these two approaches, scientometrics provides invaluable information about the most influential countries, institutions, and individual researchers in the field. Utilizing the software program VOSviewer, a comprehensive analysis was conducted on 1855 research papers published between 2010 and 2024. These papers were selected based on a predetermined set of ten key search terms. The results of the analysis indicate that China is the leading country in this field, as it boasts the highest number of published papers and the most citations received overall. Notably, Egyptian research institutions have been identified as the most influential in this area. Moreover, a single author has notably amassed 3419 citations for their 54 published works on solar desalination. This analysis unveiled past and contemporary advancements in the field and identified current trends through keyword analysis. It also offers recommendations based on bibliometric findings, including suggestions for addressing the challenges faced by solar-derived systems and addressing research area saturation. [ABSTRACT FROM AUTHOR]

The power sector is one of the major CO2-emitting industries in China. It is also the first key emissions control industry included in China's national carbon trading market established in 2021. Therefore, based on the data of 30 provinces and cities in China from 2015 to 2022, this study analyzes the impact of the national carbon market policy on the carbon emissions of the power industry based on the generalized Difference-in-Difference (DID) model. Based on the method of text analysis, this paper constructs the carbon market policy intensity index of each region and incorporates it into the DID model. Empirical analysis finds that the national carbon market policy can significantly inhibit the carbon emissions of the power industry. However, the heterogeneity analysis of 30 provinces and cities shows that the national carbon market policy has a significant impact on the regions that already have a carbon pilot, but not on the non-pilot regions. Therefore, this paper demonstrates the effectiveness of the national carbon market policy in the power industry emissions control, and also exposes the heterogeneity between regions, providing an important empirical basis for the inclusion of other energy-intensive industries. [ABSTRACT FROM AUTHOR]

China is currently focusing on the cooperative control of air pollution and CO2 emissions, as well as the mitigation of economic policy uncertainty (EPU). By using panel data from 282 cities spanning from 2003 to 2017 and a newly constructed city-level EPU index, a spatial Durbin, two-way fixed-effects model is employed, with the aim of estimating the impact of EPU on the synergistic emissions intensity (SEI) of air pollutants and CO2. Additionally, this paper investigates the potential channels through which EPU influences SEI. It also explores how pressures related to environmental protection and economic development affect the impact of EPU on SEI. The results indicate that a unit increase in EPU will result in a rise in the SEI of local cities, adjacent cities, and total cities by 930.9%, 69,162.7%, and 70,093.6%, respectively. Moreover, the channel analysis suggests that EPU exacerbates SEI by undermining the upgrading of the industrial structure, augmenting industrial structure distortion, and escalating labor market distortion. Furthermore, the effect of EPU on SEI may be lessened by an increase in environmental protection pressure, while an increase in economic development pressure may exert a positive influence. Finally, this paper concludes by recommending that policymakers should prioritize the maintenance and stability of economic policies, facilitate the advancement of the industrial structure, enhance the efficiency of labor resource allocation, and underscore the significance of managing urban air pollution and CO2 emissions. [ABSTRACT FROM AUTHOR]

A reasonable allocation of production schedules and savings in overall electricity costs are crucial for large manufacturing conglomerates. In this study, we develop an optimization model of off-site industrial production scheduling to address the problems of high electricity costs due to the irrational allocation of production schedules on the demand side of China's power supply, and the difficulty in promoting industrial and commercial distributed photovoltaic (PV) projects in China. The model makes full use of the conditions of different PV resources and variations in electricity prices in different places to optimize the scheduling of industrial production in various locations. The model is embedded with two sub-models, i.e., an electricity price prediction model and a distributed photovoltaic power cost model to complete the model parameters, in which the electricity price prediction model utilizes a Long Short-Term Memory (LSTM) neural network. Then, the particle swarm optimization algorithm is used to solve the optimization model. Finally, the production data of two off-site pharmaceutical factories belonging to the same large group of enterprises are substituted into the model for example analysis, and it is concluded that the optimization model can significantly reduce the electricity consumption costs of the enterprises by about 7.9%. This verifies the effectiveness of the optimization model established in this paper in reducing the cost of electricity consumption on the demand side. [ABSTRACT FROM AUTHOR]

The process of carbon neutrality does have economic costs; however, few studies have measured the cost and the economic neutral opportunities. This paper uses a dynamic computable general equilibrium (CGE) model to simulate China's carbon neutrality path from 2020 to 2060 and analyzes its economic impact. This paper innovatively adjusts the CGE modeling technology and simulates the boundary of the Porter hypothesis on the premise of economic neutrality. The results show that the carbon neutrality target may reduce the annual GDP growth rate by about 0.8% in 2020–2060. To make the carbon pricing method under the carbon neutrality framework meet the strong version of the Porter hypothesis (or economic neutrality), China must increase its annual total factor productivity by 0.56–0.57% in 2020–2060; this is hard to achieve. In addition, the study finds that China's 2030 carbon target has little impact on the economy, but the achievement of the 2060 carbon neutrality target will have a significant effect. Therefore, the paper believes that the key to carbon neutrality lies in the coexistence of technological innovation and carbon pricing to ensure that we can cope with global warming with the lowest cost and resistance. [ABSTRACT FROM AUTHOR]

On the basis of "Carbon Peak and Carbon Neutral" goals, carbon sequestration projects are increasing in China. The integrity of cement sheaths, as an important factor affecting carbon sequestration projects, has also received more attention and research. When CO2 is injected into the subsurface from sequestration wells, the cement sheath may mechanically fail due to the pressure accumulated inside the casing, which leads to the sealing of the cement sheath failing. The elasticity and strength parameters of the cement sheath are considered in this paper. The critical bottom-hole injection pressures of inclined well sections under anisotropic formation stresses at different depths were calculated for actual carbon-sealing wells in the X block—the CO2 sequestration target block. The sensitivity factors of the critical bottom-hole injection pressure were also analyzed. It was found that the cement sheath damage criterion was tensile damage. The Young's modulus and tensile strength of the cement sheath are the main factors affecting the mechanical failure of the cement sheath, with Poisson's ratio having the second highest influence. An increase in the Young's modulus, Poisson's ratio, and tensile strength of the cement sheath can help to improve the mechanical stability of cement sheaths in CO2 sequestration wells. This model can be used for the design and evaluation of cement in carbon sequestration wells. [ABSTRACT FROM AUTHOR]

Through extensive data research and analysis, this paper comprehensively summarizes the status and key insights of global carbon dioxide capture and storage (CCS) development. It aims to gain a comprehensive understanding of the relevant policies, technologies, and security measures adopted by major countries in their CCS development processes. Furthermore, it explores the existing status and limitations of China's offshore development efforts, while providing valuable recommendations for enhancing China's offshore CCS initiatives, as well as serving as a reference for other nations worldwide. Offshore CCS plays a crucial role for China to achieve the development target of carbon peak and carbon neutrality, due to its energy structure and industrial distribution. While China possesses significant offshore CCS potential, achieving commercialization still requires substantial efforts. To facilitate the process and draw insights from successful experiences in other countries, this paper illustrates the characteristics and generalizes the experience of offshore CCS industry practices in America, Europe and Japan, respectively. Furthermore, it is recommended that a new round of investigation into offshore CCS potential be conducted, while promoting integrated collaboration between geological surveying and marine scientific research. Additionally, further research on industrial policies and green financial strategies should be undertaken. [ABSTRACT FROM AUTHOR]

A predictive model for the spatiotemporal distribution of electric vehicle (EV) charging load is proposed in this paper, considering multimodal travel behavior and microscopic traffic simulation. Firstly, the characteristic variables of travel time are fitted using advanced techniques such as Gaussian mixture distribution. Simultaneously, the user's multimodal travel behavior is delineated by introducing travel purpose transfer probabilities, thus establishing a comprehensive travel spatiotemporal model. Secondly, the improved Floyd algorithm is employed to select the optimal path, taking into account various factors including signal light status, vehicle speed, and the position of starting and ending sections. Moreover, the approach of multi-lane lane change following and the utilization of cellular automata theory are introduced. To establish a microscopic traffic simulation model, a real-time energy consumption model is integrated with the aforementioned techniques. Thirdly, the minimum regret value is leveraged in conjunction with various other factors, including driving purpose, charging station electricity price, parking cost, and more, to simulate the decision-making process of users regarding charging stations. Subsequently, an EV charging load predictive framework is proposed based on the approach driven by electricity prices and real-time interaction of coupled network information. Finally, this paper conducts large-scale simulations to analyze the spatiotemporal distribution characteristics of EV charging load using a regional transportation network in East China and a typical power distribution network as case studies, thereby validating the feasibility of the proposed method. [ABSTRACT FROM AUTHOR]

In the context of China's new power system, various regions have implemented policies mandating the integration of new energy sources with energy storage, while also introducing subsidies to alleviate project cost pressures. Currently, there is a lack of subsidy analysis for photovoltaic energy storage integration projects. In order to systematically assess the economic viability of photovoltaic energy storage integration projects after considering energy storage subsidies, this paper reviews relevant policies in the Chinese photovoltaic energy storage market. It analyzes the cost and revenue composition of photovoltaic energy storage integration projects, and constructs a system dynamics model for the levelized cost of electricity (LCOE) of such projects. Taking a specific photovoltaic energy storage project as an example, this paper measures the levelized cost of electricity and the investment return rate under different energy storage scenarios. Combining energy storage allocation ratios and internal rate of return indicators, this paper analyzes the net present value of photovoltaic energy storage integration projects under different subsidy standards. The results indicate that, while the current energy storage subsidy policies positively stimulate photovoltaic energy storage integration projects, they exhibit a limited capacity to cover energy storage investment costs, thereby failing to incentivize capital market participation in the construction of such projects. Rational allocation of energy storage capacity and optimization of corresponding subsidy policies are crucial prerequisites for enhancing the economic viability and widespread adoption of photovoltaic energy storage integration projects. This study not only aids in investment decision making for photovoltaic power stations but also contributes to the formulation of energy storage subsidy policies. [ABSTRACT FROM AUTHOR]

Despite the pressure of carbon emissions and clean energy, coal remains the economic backbone of many developing countries due to its abundant resources and widespread distribution. The stable supply of coal is also vital for the global economy and remains irreplaceable in the future global energy structure. China has been a major contributor to annual coal output, accounting for nearly 50% worldwide since 2014. However, despite implementing intelligent coal mining technology, China's coal mining industry still employs over 1.5 million underground miners, posing significant safety risks associated with underground mining operations. Therefore, the introduction of coal mining robots in underground mines is an urgently needed scientific and technological solution for upgrading China's and even the world's coal energy industry. The working face needs a shearer, hydraulic support, a scraper conveyor, and other equipment for coordination. The deep integration of intelligent technology with factors such as "humans, machines, the environment, and management" in the workplace is the core content of intelligent coal mines. This paper puts forward an advanced framework for robot technology systems in coal mining, including single robots, robotized equipment, robot crowds, and unmanned systems. The framework clarifies the common key technologies of coal mining robot research and development and the cross-integration with new technologies such as 5G, the industrial internet, big data, artificial intelligence, and digital twins to improve the autonomous and intelligent application of coal mining robots. By establishing a scientific and complete standard system for coal mining robots, we aim to achieve the customized research and development and standardized production of various types of robot. A specific analysis is conducted on the research progress of common key technologies such as the explosion-proof design, mechanical system innovation, power drive, intelligent sensing, positioning and navigation, and underground communication of coal mining robots. The current research and application status of various types of coal mining robots in China are summarized. A new direction for future coal mining robot research and development is proposed. Robotic mining systems should be promoted to enhance the overall intelligence level and efficiency of mining equipment. To develop human–machine environment-integrated robots to improve the autonomy and collaboration level of coal mining robots, the digital twinning of the entire mine robot system should be accelerated; the normalized operation level of coal mine robots should be improved; research on coal mining robots, shield support robots, and transportation robots should be performed; intelligence should be achieved in fully mechanized mining faces; and equipment shield support for fully mechanized mining faces should be provided. The practical process of implementing coal mining robotization is summarized in this paper, and the technical and engineering feasibility of the coal mining machine population is verified. [ABSTRACT FROM AUTHOR]

Due to the serious problems with energy efficiency, carbon emissions, and thermal comfort of rural residences in northern China, an optimization of active and passive heating technologies for rural residences is necessary. In this paper, an optimization for rural residences in northern China is conducted with four objectives: the whole life cycle carbon emission; the annual energy consumption through heating, ventilation, and air conditioning systems; the annual cost; and thermal comfort. In addition, the optimization model with active–passive heating technology synergy is resolved by NSGA-II genetic algorithm. The active and passive design variables, including the type of air source heat pump, orientation, the type and thickness of envelope insulation, the layer of window glass, the window-to-wall area ratio, as well as sunspace parameters are preferred to obtain the optimal solution. The results indicate that the optimal solution obtained by the ideal point method gives the most outstanding performance. Compared with the prototype, the optimized carbon emissions in severe cold and cold regions decreased by 56.1% and 54.6%, respectively. The annual energy consumption decreased by 59.7% and 62.2%. Finally, the roof insulation thickness is the most sensitive design variable in Pareto-optimal solution sets. This paper offers significant guidance in the application of the optimization method of active–passive technology synergy to the energy-saving design of buildings. [ABSTRACT FROM AUTHOR]

With the increasing penetration of renewable energy resources, their variable, intermittent and unpredictable characteristics bring new challenges to the power system. These challenges require micro-meteorological data and techniques to provide more support for the power systems, including planning, dispatching, operation, and so on. This paper aims to provide readers with insights into the effects of micro-meteorology on power systems, as well as the actual improvement brought by micro-meteorology in some power system scenarios. This paper provides a review including the relevant micro-meteorological techniques such as observation, assimilation and numerical techniques, as well as artificial intelligence, presenting a relatively complete overview of the most recent and relevant micro-meteorology-related literature associated with power systems. The impact of micro-meteorology on power systems is analyzed in six different forms of power generation and three typical scenarios of different stages in the power system, as well as integrated energy systems and disaster prevention and reduction. Finally, a case study in China is provided. This case takes wind power prediction as an example in a power system to compare the performance when applying micro-meteorological data or not. The experimental results demonstrated that using the micro-meteorological reanalysis dataset with high spatial--temporal resolution for wind power prediction performed better, verifying the improvement of micro-meteorology to the power system to some extent. [ABSTRACT FROM AUTHOR]

There have been fruitful publications on thermal comfort of urban residential buildings in China. However, there is a lack of reviews on this topic to perform a comprehensive analysis and find opportunities to meet occupants' thermal comfort needs while improving building energy efficiencies. This paper addresses this issue by presenting a systematic review on the advancements in research on thermal comfort in urban residential buildings in China. Firstly, two common thermal comfort research approaches, i.e., field studies and laboratory studies, are discussed. Secondly, eleven main thermal comfort evaluation indicators are summarized. Finally, this paper analyzes the thermal comfort survey data from different researchers, discusses the impacts of adaptive behaviors on human thermal comfort, and provides recommendations for future research on urban residential thermal comfort. It was found that people have higher and higher requirements for their indoor thermal environment as time goes by, especially in the winter; the thermoneutral temperature is higher in warmer climate regions in the summer but lower in the winter than in colder climate regions; the thermoneutral temperature tends to increase with the indoor air temperature due to an adaptation to the indoor thermal environment. The outcomes of this paper provide valuable information on thermal comfort behaviors of urban residents in different climate zones in China, which can serve as a resource for the academic community conducting future research on thermal comfort and assist policymakers in enhancing building energy efficiencies without compromising the occupants' comfort. [ABSTRACT FROM AUTHOR]

In recent years, the frequent occurrence of typhoon weather has posed a significant threat to the stable operation of the distribution network in the southeastern coastal areas of China. Ensuring the safety of distribution lines is crucial for the normal functioning of the distribution network. Therefore, this paper proposes a risk assessment method for distribution lines in typhoon weather. Firstly, the risk assessment system for distribution lines is constructed by considering three perspectives: line structure, line state, and social economic factors. Secondly, the weight of each evaluation index is calculated using the analytic hierarchy process and CRITIC weight method. The cooperative game method is then employed to combine the calculation results, and the results are further optimized using variable weight theory. Finally, a cloud model-based risk assessment model for distribution lines is established. The analysis and calculation of distribution network data in a specific area indicate that the risk assessment level, which takes into account social and economic factors, is more accurate compared to other methods discussed in this paper. It is observed that the multi-model approach yields higher accuracy than the single-model approach. Therefore, the proposed method holds significant reference value for evaluating the risk level of distribution lines. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) power generation is booming in rural areas, not only to meet the energy needs of local farmers but also to provide additional power to urban areas. Existing methods for estimating the spatial distribution of PV power generation potential either have low accuracy and rely on manual experience or are too costly to be applied in rural areas. In this paper, we discuss three aspects, namely, geographic potential, physical potential, and technical potential, and propose a large-scale and efficient PV potential estimation system applicable to rural rooftops in China. Combined with high-definition map images, we proposed an improved SegNeXt deep learning network to extract roof images. Using the national standard Design Code for Photovoltaic Power Plants (GB50797-2012) and the Bass model, computational results were derived. The average pixel accuracy of the improved SegNeXt was about 96%, which well solved the original problems of insufficient finely extracted edges, poor adhesion, and poor generalization ability and can cope with different types of buildings. Leizhou City has a geographic potential of 1500 kWh/m2, a physical potential of 25,186,181.7 m2, and a technological potential of 442.4 MW. For this paper, we innovatively used the Bass Demand Diffusion Model to estimate the installed capacity over the next 35 years and combined the Commodity Diffusion Model with the installed capacity, which achieved a good result and conformed to the dual-carbon "3060" plan for the future of China. [ABSTRACT FROM AUTHOR]

Wind turbine energy generators operate in a variety of environments and often under harsh operational conditions, which can result in the mechanical failure of wind turbines. In order to ensure the efficient operation of wind turbines, the detection of any abnormality in the mechanics is particularly important. In this paper, a method for detecting abnormalities in the bearings of wind turbine energy generators, based on the cascade deep learning model, is proposed. First, data on the mechanics of wind turbine generators were collected, and the correlation between the data was studied in order to select the parameters related to the bearing temperature. Then, the logical relationship between the observation parameters and the target parameters was established based on a one-dimensional convolutional neural network (CNN) and a long short-term memory (LSTM) network, and the difference between the predicted temperature and the actual temperature was assessed using the root mean square error evaluation model. Finally, a numerical example was used to verify the operational data from a wind farm unit in northwest China. The results show that the CNN-LSTM model proposed in this paper can detect abnormalities earlier in the state of the main bearing than the LSTM model, and the CNN-LSTM model can detect abnormalities in the main bearing that the LSTM network cannot find. [ABSTRACT FROM AUTHOR]

Analyzing and investigating the impact of implementing an environmental policy mix on carbon emission from private cars and social welfare holds significant reference value. Firstly, based on vehicle trajectory big data, this paper employs reverse geocoding and artificial neural network models to predict carbon emissions from private cars in various provinces and cities in China. Secondly, by simulating different scenarios of carbon tax, carbon trading, and their policy mix, the propensity score matching model is constructed to explore the effects of the policy mix on carbon emission reduction from private cars and social welfare while conducting regional heterogeneity analysis. Finally, policy proposals are proposed to promote carbon emission reduction from private cars and enhance social welfare in China. The results indicate that the environmental policy mix has a significant positive impact on carbon emission reduction from private cars and social welfare. Furthermore, in the regional heterogeneity analysis, the implementation of the policy mix in eastern regions has a significant positive effect on both carbon emission reduction from private cars and social welfare, while in central and western regions, it shows a significant positive impact on social welfare but has no significant effect on carbon emission reduction in the private car sector. [ABSTRACT FROM AUTHOR]

New-energy vehicles (NEV), particularly electric vehicles, are globally popular with political and financial support from governments, which aim at reducing energy consumption and environmental pollution in the transportation sector. This paper designs a matrix model which identifies the factors influencing the decision-making process on purchasing NEVs, and applies the model on a Chinese case to investigate the impact of influencing factors on Chinese consumers' purchase behavior to NEVs. The influencing factors are divided into five groups: economic, political, social, technological and environmental. Through a detailed questionnaire survey of 526 consumers in China, this paper conducts a correlation and difference analysis between these consumers' status and the influencing factors on the purchase decision-making of NEVs through SPSS software. The results indicate that economic, technological and political factors have a strong influence on purchase behavior, while social and environmental factors have a weaker influence. Additional principal component analysis on influencing factors' preference reveals that consumers' preferences have two tendencies: practicability or appearance, with the former is attracting far more attention. Rather than practicability or appearance, consumers care more about economic and political factors. According to these results, this paper suggests several policy implications on enhancing the consumers' willingness to purchase NEVs. [ABSTRACT FROM AUTHOR]

China aims to reduce carbon dioxide emissions and achieve peak carbon and carbon neutrality goals. Natural gas, as a high-quality fossil fuel energy, is an important transition resource for China in the process of carbon reduction, so it is necessary to predict China's natural gas demand. In this paper, a novel natural gas demand combination forecasting model is constructed to accurately predict the future natural gas demand. The Lasso model and the polynomial model are used to build a combinatorial model, which overcomes the shortcomings of traditional models, which have low data dimensions and poor prediction abilities. In the modeling process, the cross-validation method is used to adjust the modeling parameters. By comparing the performance of the combinatorial forecasting model, the single forecasting model and other commonly used forecasting models, the results show that the error (2.99%) of the combinatorial forecasting model is the smallest, which verifies the high accuracy and good stability advantages of the combinatorial forecasting model. Finally, the paper analyzes the relevant data from 1999 to 2022 and predicts China's natural gas demand in the next 10 years. The results show that the annual growth rate of China's natural gas demand in the next 10 years will reach 13.33%, at 8.3 × 1011 m3 in 2033, which proves that China urgently needs to rapidly develop the gas supply capacity of gas supply enterprises. This study integrates the impact of multiple factors on the natural gas demand, predicts China's natural gas demand from 2023 to 2033, and provides decision-making support for China's energy structure adjustment and natural gas import trade. [ABSTRACT FROM AUTHOR]

Photovoltaic power generation prediction constitutes a significant research area within the realm of power system artificial intelligence. Accurate prediction of future photovoltaic output is imperative for the optimal dispatchment and secure operation of the power grid. This study introduces a photovoltaic prediction model, termed ICEEMDAN-Bagging-XGBoost, aimed at enhancing the accuracy of photovoltaic power generation predictions. In this paper, the original photovoltaic power data initially undergo decomposition utilizing the Improved Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (ICEEMDAN) algorithm, with each intrinsic mode function (IMF) derived from this decomposition subsequently reconstructed into high-frequency, medium-frequency, and low-frequency components. Targeting the high-frequency and medium-frequency components of photovoltaic power, a limiting gradient boosting tree (XGBoost) is employed as the foundational learner in the Bagging parallel ensemble learning method, with the incorporation of a sparrow search algorithm (SSA) to refine the hyperparameters of XGBoost, thereby facilitating more nuanced tracking of the changes in the photovoltaic power's high-frequency and medium-frequency components. Regarding the low-frequency components, XGBoost-Linear is utilized to enable rapid and precise prediction. In contrast with the conventional superposition reconstruction approach, this study employs XGBoost for the reconstruction of the prediction output's high-frequency, intermediate-frequency, and low-frequency components. Ultimately, the efficacy of the proposed methodology is substantiated by the empirical operation data from a photovoltaic power station in Hebei Province, China. Relative to integrated and traditional single models, this paper's model exhibits a markedly enhanced prediction accuracy, thereby offering greater applicational value in scenarios involving short-term photovoltaic power prediction. [ABSTRACT FROM AUTHOR]

In order to achieve the ambitious goal of "carbon neutrality", countries around the world are striving to develop clean energy. Against this background, this paper takes China and Italy as representatives of developing and developed countries to summarize the energy structure composition and development overview of the two countries. The paper analyzes the serious challenges facing the future energy development of both countries and investigates the possibilities of energy cooperation between the two countries, taking into account their respective advantages in energy development. By comparing the policies issued by the two governments to encourage clean energy development, this paper analyzes the severe challenges faced by the two countries' energy development in the future and combines their respective energy development advantages to look forward to the possibility of energy cooperation between the two countries in the future. This lays the foundation for China and Italy to build an "Energy Road" after the "Silk Road". [ABSTRACT FROM AUTHOR]

Since the power generation structures and load characteristics in each province in China are quite different, the distribution of peak regulating resources and demands are extremely imbalance. Restricted by a low power marketization degree, peak regulating resource shortages, and transmission channel blocks, the efficient utilization of new energy is facing greater pressures. In order to improve the mutual aid in regional power grids and to obtain more precise simulation results, this paper proposes a two-layer optimization dispatching model, considering the mutual aid of peak regulation resources between each province. It determines the optimal startup mode and the units' power output in each province and obtains the power output arrangements for all the units and the technical and economic indicators. The model and the solution method are original and innovative. And it effectively solved the unequal distribution problem between the peak regulating demands and resources of each provincial power grid. Finally, taking an actual regional power grid in China as an example, the simulation results show that the proposed model can significantly improve the utilization rate of new energy, which verifies the effectiveness and feasibility of the proposed model and methods presented in this paper. [ABSTRACT FROM AUTHOR]

The complexity and strong spatial and temporal characteristics of municipal solid waste (MSW) have made resource utilization a major challenge in establishing the life-cycle model of MSW. Based on the planning of the domestic "dual-carbon" target and the current status of the structural transformation of resource utilization, this paper summarizes the physicochemical properties of MSW in China by component, species, and region. The aim is to identify the physicochemical components of MSW in different regions of China, drawing on the research findings of various scholars. A total of 159 sets of MSW data were collected, including 90 sets of physical composition and 69 sets of elemental composition. These data were used to calculate the calorific value of MSW and determine the energy-recovery and power-generation potentials before and after MSW classification. The analysis estimates the volume of MSW requiring removal in different regions of China in 2021 and assesses the effectiveness of the energy-recovery potential (ERP) and power-generation potential (PGP) before and after MSW classification in these regions. The aim is to offer insightful guidance and recommendations for municipal waste-treatment strategies tailored to the diverse regions of China. [ABSTRACT FROM AUTHOR]

This paper investigates whether and how tax and fee support policies at the firm level in China influence the total factor energy productivity of enterprises. Using panel data from Chinese public trading companies for the period 2004–2020, this study employs a panel model for estimation. The findings suggest that tax rebates contribute to the improvement of the total factor energy productivity of enterprises. Specifically, a 1% increase in tax refunds leads to a growth of approximately 0.008% in total factor energy productivity. Robustness tests and endogeneity checks confirm the validity of the results. Heterogeneity analysis reveals that tax rebates have a significant impact on state-owned enterprises, small- and medium-sized enterprises, and non-technology firms in terms of enhancing their total factor energy productivity. Mechanism analysis indicates that tax rebates facilitate firms in alleviating financing constraints and enhancing their innovation capabilities, thereby improving energy efficiency. The research findings of this paper provide empirical support for optimizing policy supply, improving energy usage efficiency, and promoting the development of a globally sustainable economy. [ABSTRACT FROM AUTHOR]

In recent years, the State Grid of China has placed significant emphasis on the monitoring of noise in substations, driven by growing environmental concerns. This paper presents a substation noise monitoring system designed based on an end-network-cloud architecture, aiming to acquire and analyze substation noise, and report anomalous noise levels that exceed national standards for substation operation and maintenance. To collect real-time noise data at substations, a self-developed noise acquisition device is developed, enabling precise analysis of acoustic characteristics. Moreover, to subtract the interfering environmental background noise (bird/insect chirping, human voice, etc.) and determine if noise exceedances are originating from substation equipment, an intelligent noise separation algorithm is proposed by leveraging the convolutional time-domain audio separation network (Conv-TasNet), dual-path recurrent neural network (DPRNN), and dual-path transformer network (DPTNet), respectively, and evaluated under various scenarios. Experimental results show that (1) deep-learning-based separation algorithms outperform the traditional spectral subtraction method, where the signal-to-distortion ratio improvement (SDRi) and the scale-invariant signal-to-noise ratio improvement (SI-SNRi) of Conv-TasNet, DPRNN, DPTNet and the traditional spectral subtraction are 12.6 and 11.8, 13.6 and 12.4, 14.2 and 12.9, and 4.6 and 4.1, respectively; (2) DPTNet and DPRNN exhibit superior performance in environment noise separation and substation equipment noise separation, respectively; and (3) 91% of post-separation data maintains sound pressure level deviations within 1 dB, showcasing the effectiveness of the proposed algorithm in separating interfering noises while preserving the accuracy of substation noise sound pressure levels. [ABSTRACT FROM AUTHOR]

This paper introduces an innovative cooperative model for energy efficiency retrofitting that incorporates carbon emission rights, addressing critical financial constraints in Energy Performance Contracting (EPC). By employing the fuzzy analytic hierarchy process (F-AHP) to evaluate risk assessment indicators and stakeholder contributions and utilizing the enhanced Shapley method for equitable benefit distribution, the model demonstrates significant improvements in financing and efficiency for energy conservation projects. The findings are as follows: (1) the energy efficiency retrofit model, which integrates carbon emission rights, effectively alleviates the financial constraints and fosters energy conservation and emission reduction in guaranteed-savings EPC projects; (2) the enhanced Shapley method is deemed appropriate for the equitable distribution of energy-saving benefits among stakeholders; (3) when compared with the traditional model and the benefit allocation-absent carbon rights, the energy-saving benefits of the energy efficiency retrofit model incorporating carbon emission rights are higher in individual and overall terms. The findings of this study offer a viable solution to financing challenges faced by stakeholders in such projects and delineate a pragmatic approach for enterprises to enhance energy efficiency and reduce emissions. [ABSTRACT FROM AUTHOR]

The conversion of coal-fired power plants to nuclear power stations is a potential method for decarbonizing coal power and offers a pathway for low-carbon development in China's power industry. This paper focuses on retrofitting China's coastal coal-fired power stations and compares the potential nuclear reactor technologies for the retrofit: China's mainstream pressurized water reactor and the commercially operated fourth-generation high-temperature gas-cooled reactor (HTGR). The analysis compares the degree of matching between the two technologies and coal-fired power stations in terms of unit capacity, thermal system parameters, unit speed, structural dimensions, and weight, which significantly impact the retrofit scheme. The results indicate that HTGR is more compatible with coal-fired power plants and is recommended as the type of nuclear reactor technology to be retrofitted. The study selected the 210 MWe High-Temperature Gas-Cooled Reactor Pebble-Bed Module (HTR-PM) as the reactor technology for retrofitting a typical 300 MW class subcritical coal-fired unit. Based on the concept of subcritical parameters upgrading, the potential analysis and strategy study of retrofit is carried out in terms of the turbine, the main heat exchange equipment, the main pumps, and the main thermal system pipelines in the conventional island. The results indicate that the conventional island of the HTR-PM nuclear power plant has significant potential for retrofitting, which can be a crucial research direction for nuclear retrofitting of coal-fired power plants. [ABSTRACT FROM AUTHOR]

The exploration of continental shale oil in China has made a breakthrough in many basins, but the pure shale type has only been found in the Qingshankou Formation, Gulong Sag, Songliao Basin, and the evaluation of shale oil occurrence and sweet spot faces great challenges. Using information about the total organic carbon (TOC), Rock-Eval pyrolysis, vitrinite reflectance (Ro), kerogen elemental composition, carbon isotopes, gas chromatography (GC), bitumen extraction, and component separation, this paper systematically studies the organic geochemical characteristics and shale oil occurrence at the Qingshankou Formation. The G1 well, which was cored through the entire section of the Qingshankou Formation in the Gulong Sag, was the object of this study. On this basis, the favorable sweet spots for shale oil exploration are predicted. It is concluded that the shale of the Qingshankou Formation has high organic heterogeneity in terms of organic matter features. The TOC content of the source rocks in the Qingshankou Formation is enhanced with the increase in the burial depth, and the corresponding organic matter types gradually changed from Ⅱ2 and Ⅱ1 types to the Ⅰ type. The distribution of Ro ranges from 1.09% to 1.67%, and it is the mature to high-mature evolution stage that generates a large amount of normal crude oil and gas condensate. The high-quality source rocks of good to excellent grade are mainly distributed in the Qing 1 member and the lower part of the Qing 2 member. After the recovery of light hydrocarbons and the correction of pyrolytic heavy soluble hydrocarbons, it is concluded that the occurrence state of shale oil in the Qingshankou Formation is mainly the free-state form, with an average value of 6.9 mg/g, and there is four times as much free oil as adsorbed oil. The oil saturation index (OSI), mobile hydrocarbon content, Ro, and TOC were selected to establish the geochemical evaluation criteria for shale oil sweet spots in the Qingshankou Formation. The evaluation results show that interval 3 and interval 5 of the Qingshankou Formation in the G1 well are the most favorable sections for shale oil exploration. [ABSTRACT FROM AUTHOR]

High-voltage heat release from batteries can cause safety issues for electric vehicles. Relevant scientific research work is carried out in the laboratory. The battery safety of laboratory experiments should not be underestimated. In order to evaluate the safety performance of batteries in the laboratory testing of driving conditions of electric vehicles, this paper simulated and compared the discharge characteristics of two common batteries (lithium iron phosphate (LFP) battery and nickel–cobalt–manganese (NCM) ternary lithium battery) in three different operating conditions. The operating conditions are the NEDC (New European Driving Cycle), WLTP (World Light Vehicle Test Procedure) and CLTC-P (China light vehicle test cycle) for normal driving of electric vehicles. LFP batteries have a higher maximum voltage and lower minimum voltage under the same initial voltage conditions, with a maximum voltage difference variation of 11 V. The maximum current of WLTP is significantly higher than NEDC and CLTC-P operating conditions (>20 A). Low current discharge conditions should be emulated in teaching simulation and experiments for safety reasons. The simulation data showed that the LFP battery had good performance in maintaining the voltage plateau and discharge voltage stability, while the NCM battery had excellent energy density and long-term endurance. [ABSTRACT FROM AUTHOR]

It is well known that the existing horizontal-well-drilling and hydraulic fracturing technology used to achieve large-scale, cost-effective production from immature to low–moderate-maturity continental shale in China, where the organic matter mainly exists in solid form, is fairly ineffective. To overcome the obstacles, in situ conversion technology seems feasible, while implementing it in the target layer along with estimating the amount of expected recoverable hydrocarbon in such shale formations seems difficult. This is because there are no guidelines for choosing the most appropriate method and selecting relevant key parameters for this purpose. Hence, based on thermal simulation experiments during the in situ conversion of crude oil from the Triassic Chang 73 Formation in the Ordos Basin and the Cretaceous Nenjiang Formation in the Songliao Basin, this deficiency in knowledge was addressed. First, relationships between the in situ-converted total organic carbon (TOC) content and the vitrinite reflectance (Ro) of the shales and between the residual oil volume and the hydrocarbon yield were established. Second, the yields of residual oil and in situ-converted hydrocarbon were measured, revealing their sensitivity to fluid pressure and crude oil density. In addition, a model was proposed to estimate the amount of in situ-converted hydrocarbon based on TOC, hydrocarbon generation potential, Ro, residual oil volume, fluid pressure, and crude oil density. Finally, a method was established to determine key parameters of the final hydrocarbon yield from immature to low–moderate-maturity organic material during in situ conversion in shales. Following the procedure outlined in this paper, the estimated recoverable in situ-converted oil in the shales of the Nenjiang Formation in the Songliao Basin was estimated to be approximately 292 × 108 tons, along with 18.5 × 1012 cubic meters of natural gas, in an area of approximately 8 × 104 square kilometers. Collectively, the method developed in this study is independent of the organic matter type and other geological and/or petrophysical properties of the formation and can be applied to other areas globally where there are no available in situ conversion thermal simulation experimental data. [ABSTRACT FROM AUTHOR]

With the energy structure transition and the development of the green power market, the role of electricity retailers in multi-market green power trading has become more and more important. Particularly in China, where aggressive green energy policies and rapid market transformations provide a distinct context for such studies, the challenges are pronounced. Under demand-side response, electricity retailers face the uncertainty of users' electricity consumption and incentives, which complicates decision-making processes. The purpose of this paper is to explore the optimization decision-making problem of multi-market green power trading for electricity retailers under demand-side response, with a special focus on the Chinese market due to its leadership in implementing substantial green energy initiatives and its potential to set precedents for global practices. We first construct a two-party benefit optimization model, which comprehensively considers the profit objectives for electricity retailers and utility maximization for users. Then, the model is solved by the Lagrange multiplier method and distributed subgradient algorithm to obtain the optimal solution. Finally, the effectiveness of the incentive optimization strategy under the multi-market to promote green power consumption and improve the profit of electricity retailers is verified by arithmetic simulation. The results of this study show that the incentive optimization strategy under multi-market, particularly within the Chinese context, is expected to provide a reference for electricity retailers to develop more flexible and effective trading strategies in the green power market and to contribute to the process of promoting green power consumption globally. [ABSTRACT FROM AUTHOR]

To qualify the risk of extreme weather events for power supply security during the long-term power system transformation process, this paper proposes a risk probability evaluation method based on probabilistic production simulation. Firstly, the internal relationship of extreme weather intensity and duration is depicted using the copula function, and the influences of extreme weather on power security are described using the guaranteed power output ability coefficient, which can provide the extreme scenario basis for probabilistic production simulation. Then, a probabilistic production simulation method is proposed, which includes a typical-year scenario and extreme weather events. Meanwhile, an index system is proposed to qualify the power security level, which applies the loss of load expectation (LOLE) and time of loss of load expectation (TOLE) under different scenarios and other indices to reveal the long-term power security trend. Finally, the long-term power supply risks for the Yunnan provincial power system are analyzed using the proposed method, validating that the proposed method is capable of characterizing the influences of extreme weather on power security. The security level of different long-term power transformation schemes is evaluated. [ABSTRACT FROM AUTHOR]

Studies related to oil and gas wells have attracted worldwide interest due to the increasing energy shortfall and the requirement of sustainable development and environmental protection. However, the state of oil and gas wells in terms of research characteristics, technological megatrends, article-produced patterns, leading study items, hot topics, and frontiers is unclear. This work is aimed at filling the research gaps by performing a comprehensive bibliometric analysis of 6197 articles related to oil and gas wells published between 1900 and 2021. VOSviewer and CiteSpace software were used as the main data analysis and visualization tools. The analysis shows that the annual variation of article numbers, interdisciplinary numbers, and cumulative citations followed exponential growth. Oil and gas well research has promoted the expansion of research fields such as engineering, energy and fuels, geology, environmental sciences and ecology, materials science, and chemistry. The top 10 influential studies mainly focused on shale gas extraction and its impact on the environment. More studies were produced by larger author teams and inter-institution collaborations. Elkatatny and Guo have greatly contributed to the application of artificial intelligence in oil and gas wells. The two most contributing institutions were the Southwest Petr Univ and China Univ Petr from China. The People's Republic of China, the US, and Canada were the countries with the most contributions to the development of oil and gas wells. The authoritative journal in engineering technology was J Petrol Sci Eng, in environment technology was Environ Sci Technol, in geology was Aapg Bull, and in materials was Cement Concrete Res. The keyword co-occurrence network cluster analysis indicated that oil well cement, new energy development, machine learning, hydraulic fracturing, and natural gas and oil wells are the predominant research topics. The research frontiers were oil extraction and its harmful components (1992–2016), oil and gas wells (1997–2016), porous media (2007–2016), and hydrogen and shale gas (2012–2021). This paper comprehensively and quantitatively analyzes all aspects of oil and gas well research for the first time and presents valuable information about active and authoritative research entities, cooperation patterns, technology trends, hotspots, and frontiers. Therefore, it can help governments, policymakers, related companies, and the scientific community understand the global progress in oil and gas well research and provide a reference for technology development and application. [ABSTRACT FROM AUTHOR]

With the rapid development of China's economy, China has become the world's largest carbon emitter. China not only has an obvious growth rate of industrial carbon emissions but also the intensity of agricultural carbon emissions is hovering at a high level. The development of China's agricultural economy has largely come at the expense of high emissions. Currently, under the background of global warming and difficulty in controlling greenhouse gas emissions, the development of low-carbon agriculture is an important way to realize the harmonious development of the ecological environment and economic growth and to promote the sustainable development of agriculture. The agricultural production efficiency is the main factor affecting the intensity of agricultural carbon emissions. Based on provincial panel data of China from 2010 to 2019, this paper establishes an indicator system and uses the super-efficiency SBM model to measure agricultural production efficiency. The regional agricultural carbon emissions were estimated using carbon-emission-related agricultural production activities. In order to study the nonlinear relationship between agricultural production efficiency and agricultural carbon emission intensity in the narrow sense, this paper uses a threshold regression model with agricultural carbon emissions as the threshold variable. Based on the analysis of China's agricultural production efficiency and agricultural carbon emissions from 2010 to 2019, an empirical test is conducted through a threshold regression model. The results show an "inverted U-shaped" relationship between agricultural production efficiency and agricultural carbon emission intensity. In areas with high agricultural production efficiency, the improvement of production efficiency can suppress the intensity of agricultural carbon emissions; in areas with low agricultural production efficiency, the improvement of production efficiency increases the intensity of agricultural carbon emissions. Finally, based on the research conclusions, this paper provides feasible suggestions and countermeasures for China's agricultural carbon emission reduction and improvement of agricultural production efficiency. [ABSTRACT FROM AUTHOR]

As the world becomes more concerned about carbon emissions, the Chinese government, which is a large contributor to carbon emissions, has also begun to pay attention to the issue of carbon emissions. Environmental regulatory policies have been implemented to improve the environment, but are these policies really conducive to improving firms' eco-innovation performance? This paper empirically investigates the relationship between environmental regulation policies and firms' eco-innovation performance in China and finds that: firstly, environmental regulation in China is inadequate and that manufacturing eco-innovation performance is generally low; secondly, there is a U-shaped relationship between environmental regulation policies and firms' eco-innovation performance; thirdly, there is significant industry and regional heterogeneity in the induced effects of environmental regulation tools; and fourthly, there is a mediating effect of industrial agglomeration on the promotion of firms' eco-innovation performance. The conclusions of this paper are: firstly, that the Chinese government should continue to improve environmental regulations and strictly enforce them so that green becomes the colour of 'economic recovery'; secondly, that the Chinese government should develop scientific and reasonable environmental regulatory policies according to local conditions; thirdly, that Chinese companies should increase their spending on research and development; and fourthly, that the Chinese government needs to optimise the industrial layout and support mechanisms. The Chinese government should play an active role in industrial agglomeration in technological innovation. [ABSTRACT FROM AUTHOR]

China's Yangtze River Basin has an increasingly strong demand for crude oil. As a seaborne import port for crude oil, Ningbo-Zhoushan Port is under pressure to undertake the transshipment of crude oil to various oil terminals in the Yangtze River Basin. To alleviate the stress of crude oil transportation in Ningbo-Zhoushan Port, the port operator proposed the crude oil sea–river transshipment scheme in Nantong Port. Therefore, this paper aims to verify the feasibility of this scheme. We used the discrete event system modeling and entity relationship diagram method to construct the hierarchical and concept models of the Yangtze River Basin's crude oil sea–river transportation system. Furthermore, we developed corresponding simulation modules on the Witness platform and carried out a simulation experiment of the crude oil sea–river transfer scheme. In the experiment, we analyzed the influence of the transshipment ratio on berth utilization, waiting time, and sailing time of other ports by adjusting the parameter of the transshipment ratio. The experimental results show that when the transshipment rate reaches 100%, the utilization rates of loading and unloading berth in Nantong Port are 4% and 13%, respectively, which evidences that Nantong Port has transshipment potential. At the same time, the simulation experiment's statistical indicators, such as the utilization rate of oil berths, the queuing time of oil tankers, and the sailing time, not only confirm the feasibility of the crude oil sea–river transshipment scheme of Nantong Port but also confirm that the scheme is helpful to improve crude oil transportation efficiency. The simulation results benefit the port operation decision, and the established model and simulation module can be encapsulated and reused. [ABSTRACT FROM AUTHOR]

Similar to many energy projects, the evaluation of investments in natural gas projects is influenced by technical and economic uncertainties. These uncertainties include natural resource characteristics, production, decline laws, prices, taxes, benchmark yield, and so on. In China, conventional natural gas is still the dominant energy source. The investors are mainly large state-owned energy companies. Therefore, it is necessary to include the technical and economic uncertainties, as well as the investment decision and optimization problems of the enterprises in a unified analytical framework. To this end, this paper innovatively constructs such a framework. Using numerical simulations of approaches, the process of investment decision optimization by companies based on technology assessment and price forecasting is visualized in detail. The results suggest that the investment decision of the enterprise needs to consider technical and economic uncertainties in an integrated manner. It also needs to combine the business strategy and social responsibility of the enterprise in order to construct the objective function. With the availability of data, the framework and its algorithms can be used for practical evaluation of investment plans and decision supports for conventional natural gas projects. The framework can also integrate the analytical perspective of the macroeconomic and political environment to bring in a more comprehensive range of uncertainties. [ABSTRACT FROM AUTHOR]

In power systems with high penetration of renewable energy, traditional physical model-based optimal dispatch methods suffer from modeling difficulties and poor adaptability, while data-driven dispatch methods, represented by reinforcement learning, have the advantage of fast decision making and reflecting long-term benefits. However, the performances of data-driven methods are much limited by the problem of distribution shift under insufficient power system scenario samples in the training. To address this issue, this paper proposes an improved scenario division method by integrating the power system's key physical features and the data-driven variational autoencoder (VAE)-generated features. Next, based on the scenario division results, a multi-scenario data-driven dispatch model is established. The effectiveness of the proposed method is verified by a simulation conducted on a real power system model in a province of China. [ABSTRACT FROM AUTHOR]

The highlighted energy consumption of Internet data center (IDC) in China has become a pressing issue with the implementation of the Chinese dual carbon strategic goal. This paper provides a comprehensive review of cooling technologies for IDC, including air cooling, free cooling, liquid cooling, thermal energy storage cooling and building envelope. Firstly, the environmental requirements for the computer room and the main energy consumption items for IDC are analyzed. The evaluation indicators and government policies for promoting green IDC are also summarized. Next, the traditional cooling technology is compared to four new cooling technologies to find effective methods to maximize energy efficiency in IDC. The results show that traditional cooling consumes a significant amount of energy and has low energy efficiency. The application of free cooling can greatly improve the energy efficiency of IDC, but its actual implementation is highly dependent on geographical and climatic conditions. Liquid cooling, on the other hand, has higher energy efficiency and lower PUE compared to other cooling technologies, especially for high heat density servers. However, it is not yet mature and its engineering application is not widespread. In addition, thermal energy storage (TES) based cooling offers higher energy efficiency but must be coupled with other cooling technologies. Energy savings can also be achieved through building envelope improvements. Considering the investment and recovery period for IDC, it is essential to seek efficient cooling solutions that are suitable for IDC and take into account factors such as IDC scale, climate conditions, maintenance requirements, etc. This paper serves as a reference for the construction and development of green IDC in China. [ABSTRACT FROM AUTHOR]

Since their inception with Bitcoin in the late 2000s, cryptocurrencies have grown exponentially, reshaping traditional financial paradigms. This transformative journey, while innovative, brings forth pressing concerns about their energy consumption and carbon footprint. While many studies tend to zoom in on Bitcoin, this paper broadens the perspective by evaluating energy consumption across various cryptocurrencies. We analyze nine cryptocurrency projects, chosen for their market value, technology, and data availability. These span a spectrum from pioneering to emerging digital coins, offering a holistic view of the crypto realm. To contextualize, we juxtapose the energy usage of these digital currencies with traditional payment means like Visa and Mastercard. Our analysis shows vast differences in energy use among cryptocurrencies, largely tied to their consensus algorithms. Notably, while Bitcoin stands out as highly energy-intensive, several newer digital currencies have energy footprints mirroring those of conventional payment methods. Additionally, CO2 emissions estimation presents challenges due to variances in miner locations and regional energy sources, with potential higher emissions if concentrated in carbon-intensive regions like China. Nonetheless, the silver lining emerges as many cryptocurrencies, especially those beyond Bitcoin, register considerably lower CO2 emissions. By moving the lens beyond Bitcoin, this paper paints a more nuanced picture of the environmental ramifications of the crypto world. [ABSTRACT FROM AUTHOR]

With the goal of achieving "carbon peak in 2030 and carbon neutrality in 2060", as clearly proposed by China, the transportation sector will face long–term pressure on carbon emissions, and the application of hydrogen fuel cell vehicles will usher in a rapid growth period. However, true "zero carbon" emissions cannot be separated from "green hydrogen". Therefore, it is of practical significance to explore the feasibility of renewable energy hydrogen production in the context of hydrogen refueling stations, especially photovoltaic hydrogen production, which is applied to hydrogen refueling stations (hereinafter referred to "photovoltaic hydrogen refueling stations"). This paper takes a hydrogen refueling station in Shanghai with a supply capacity of 500 kg/day as the research object. Based on a characteristic analysis of the hydrogen demand of the hydrogen refueling station throughout the day, this paper studies and analyzes the system configuration, operation strategy, environmental effects, and economics of the photovoltaic hydrogen refueling station. It is estimated that when the hydrogen price is no less than 6.23 USD, the photovoltaic hydrogen refueling station has good economic benefits. Additionally, compared with the conventional hydrogen refueling station, it can reduce carbon emissions by approximately 1237.28 tons per year, with good environmental benefits. [ABSTRACT FROM AUTHOR]

Climate change and transition risks have become major issues concerning the sustainable development of human society today. And the stranded fossil energy assets generated in this context are gradually becoming an important factor affecting corporate development and the stability of financial markets. Based on the data of China's A-share listed companies in the high-carbon industry from 1998 to 2021, a two-way fixed-effects model is used to study the determinants of corporate fossil energy asset impairment. Furthermore, a "two-stage estimation approach" is used to measure the risk of stranding corporate fossil energy assets The results show that: (1) climate transition risks are a significant cause of stranded corporate fossil energy assets; (2) the stranded risk of Chinese companies' fossil energy assets has been oscillating upward over the past two decades; (3) the stranded risk has increased significantly after the "double carbon" target. Based on the above conclusions, this paper puts forward relevant suggestions from both government and enterprise perspectives. [ABSTRACT FROM AUTHOR]

The income gap and global warming have always been topics of common concern to scholars worldwide. Internationally, there is no consensus yet about the impact of the income gap on carbon emissions, and there are few studies about that in China. To explore the effect of the income gap on carbon emissions at the provincial level in China, this paper first theoretically and qualitatively analyzes the non-linear impact of the income gap on carbon emissions. Then, the Gini coefficient of the resident income of different regions in China from 2010 to 2019 is calculated. Finally, a threshold regression model is used to quantitatively test the existence of a threshold effect between the income gap and carbon emission intensity in China. The threshold value is the per capita disposable income of residents. The results show that the income gap is positively related to carbon emission intensity in poor regions. In high-income areas, the widening income gap inhibits the increase in carbon emission intensity. Based on this, this paper proposes policy recommendations to narrow the income gap and reduce the intensity of carbon emissions. [ABSTRACT FROM AUTHOR]

The disordered access of massively distributed energy resources (DERs) brings great challenges to the operation stability of the power grid. This paper puts forward the concept of a cluster, which gathers DERs in large quantities, small capacities, dispersion and disorder to form a large, centralized and orderly whole, namely cluster, with certain incentive measures. In this paper, a multi-timescale optimization method of day-ahead planning and intra-day rolling optimization is proposed according to the characteristics of aggregated clusters and the requirements of China's power grid architecture. Specifically, the day ahead model is proposed in two steps: the first step is to establish an optimization model with the goal of optimal fitting the target load curve and maximizing the utilization of DERs; The second step is to establish a potential game model considering the reasonable distribution of cluster benefits. Taking the minimum percentage of output correction of each cluster as the objective, considering the deviation of load forecasting and the deviation of day ahead instruction execution, an intra-day rolling optimization model is established. Finally, the application scenario of cluster participation in power grid auxiliary peak shaving is simulated and verified. The simulation results show that the cluster collaborative optimization method proposed in this paper can effectively reduce the load peak valley difference and maximize the use of cluster resources. The optimization tasks can be reasonably allocated while ensuring the stable and reliable operation of the power grid. [ABSTRACT FROM AUTHOR]

Bearing in mind European Green Deal assumptions regarding a significant reduction of green house emissions, electricity generation from Renewable Energy Sources (RES) is more and more important nowadays. Besides this, accurate and reliable electricity generation forecasts from RES are needed for capacity planning, scheduling, managing inertia and frequency response during contingency events. The recent three years have proved that Machine Learning (ML) models are a promising solution for forecasting electricity generation from RES. In this review, the 8-step methodology was used to find and analyze 262 relevant research articles from the Scopus database. Statistic analysis based on eight criteria (ML method used, renewable energy source involved, affiliation location, hybrid model proposed, short term prediction, author name, number of citations, and journal title) was shown. The results indicate that (1) Extreme Learning Machine and ensemble methods were the most popular methods used for electricity generation forecasting from RES in the last three years (2020–2022), (2) most of the research was carried out for wind systems, (3) the hybrid models accounted for about a third of the analyzed works, (4) most of the articles concerned short-term models, (5) the most researchers came from China, (6) and the journal which published the most papers in the analyzed field was Energies. Moreover, strengths, weaknesses, opportunities, and threats for the analyzed ML forecasting models were identified and presented in this paper. [ABSTRACT FROM AUTHOR]

The development of renewable energy in China has made remarkable achievements, but the problem of renewable energy consumption has become increasingly prominent. This paper establishes a power market trading system for renewable energy, with the aim of promoting large-scale renewable energy consumption and increasing the enthusiasm of renewable energy producers and users to participate in market transactions. First, according to the power generation cost, the backup cost of renewable energy power plants and the possible quotation strategies of other renewable energy producers, a quotation model of renewable energy producers is established. In the clearing of the spot market by renewable energy producers, the independent market operator conducts the first-stage clearing of the electricity market with the goal of maximizing social welfare. After the announcement of the clearing results, the renewable energy producers that did not win the bid will revise their quotations and carry out the second stage clearing to realize the consumption of renewable energy. In this paper, the particle swarm algorithm combined with the CPLEX solver is used to solve the problem, and finally, different scenarios are analyzed through example analysis. The results show that, compared with the conventional power market trading mechanism, the energy abandonment rate of the power market trading mechanism for renewable energy proposed in this paper drops from 8.2% to 2.1%, and the profit margin of renewable energy producers increase by 6.6%. It is demonstrated that the proposed electricity market mechanism can effectively promote the consumption of renewable energy and increase the income of renewable energy producers. [ABSTRACT FROM AUTHOR]

Ensuring optimal building performance is vital for enhancing student activity comfort and fostering energy-saving initiatives toward low-carbon objectives. This paper focuses on university student centers in China, aiming to diminish building energy consumption while enhancing indoor thermal comfort. Parametric modeling of typical cases is executed using the Grasshopper 1.0.0007 software package, and the simulation of building energy consumption and indoor thermal comfort relies on the Ladybug and Honeybee plug-in. Employing a multi-objective optimization design method and the Octopus multi-objective optimization algorithm, this study integrates numerical simulations and on-site surveys to analyze how factors like building form, orientation, envelope structure, and others impact the indoor and outdoor environment. A comprehensive optimization design approach is implemented for the building's exterior components, including the walls, windows, roof, and shading system. After conducting a comparative analysis of the annual comprehensive energy consumption and indoor thermal comfort before and after the optimization plan, it is determined that implementing these measures reduces the annual comprehensive energy consumption of the building under study by 58.8% and extends the duration of indoor thermal comfort by 53.0%. This study presents a practical optimization design methodology for university student center architecture in China, aiding architects in decision making and advocating for energy-efficient building designs. [ABSTRACT FROM AUTHOR]

With a significant share of renewable power generation integrated into the power supply, it is crucial to timely adjust the regulating peak load for coal-fired power plants equipped with CO2 capture to ensure the stable operation of the multi-energy supply system. In this paper, the effects of varying boiler loads on the techno-economic performance of the retrofitted power plant were studied. Furthermore, the potential for reducing the cost of CO2 capture was investigated, and early opportunities for demonstration were discussed. Results showed that when the boiler load decreased from 100% turbine heat acceptance condition to 50% turbine heat acceptance condition, the cost of CO2 capture increased from 37.0 $/t CO2 to 57.0 $/t CO2, cost contribution of energy penalty and extra capital investment also increased from 20.6 $/t-CO2 to 25.7 $/t-CO2, and from 16.4 $/t-CO2 to 31.3 $/t-CO2, respectively. Furthermore, by improving separation efficiency from 0.15 to 0.5, a 25% to 30% reduction in CO2 capture cost can be achieved. The cost of CO2 capture could decrease by 42.2–50.5% when the cumulative capacity reaches 250 GW under the high investment learning rate scenario. According to the distribution of coal prices and renewable energy sources in China, the early demonstration projects of multi-energy supply systems should prioritize the northern region. The results of this work can provide informative references for making roadmaps and policies for CO2 emission reduction toward carbon neutrality. [ABSTRACT FROM AUTHOR]

This paper takes a low-energy building in Changchun, China, as an object to test and study the characteristics of two heating modes, AC/DC (Alternative current/Direct current) switching and AC/DC synthesis, from the perspectives of temperature change, irradiation intensity, power generation, electricity consumption, etc. Firstly, the experimental research was conducted under two heating cable modes by establishing mathematical models and a test rig, and it was found that the photoelectric conversion efficiency on sunny, cloudy, and overcast days was 18%, 14.5%, and 12%, respectively. A simulation model was established by TRNSYS to run an ultra-low-energy building throughout the year. It was found that the highest and lowest monthly power generation occurred in February and July, respectively. The annual power generation of the system was 6614 kWh, and the heating season power generation was 3293.42 kWh. In the current research, the DC electricity consumption was slightly higher than the AC electricity consumption. Under conditions of similar radiation intensity and power generation, the indoor temperature of the AC/DC synthesis cable heating mode were 1.38% higher than the AC/DC switching heating able mode, and the electricity consumption were 10.9% and 4.76% higher, respectively, than those of the AC switching heating cable mode. This is of great significance for clean-energy heating, energy savings, and emissions reduction in northern China. [ABSTRACT FROM AUTHOR]

Amid China's pursuit of a green and low-carbon transition, corporate social responsibility (CSR) is facing new challenges. Our research delves into the influencing factors and mechanisms for CSR reputation under green and low-carbon transition and provides practical enlightenment for enterprises to achieve sustainable development. This paper constructs a comprehensive index system of CSR from five dimensions (innovation, coordination, sustainability, openness, and sharing), and CSR reputation of China's A-share listed companies is comprehensively estimated by using an entropy method and data from 2013 to 2021. Then, from the perspective of external supervision and internal governance, we discuss the influence factors of CSR reputation, with an emphasis on the impact of public environmental concerns. Finally, the realization mechanism of CSR is further revealed. It is found that public environmental concern and the expansion of the enterprise scale boost the enhancement of CSR reputation. However, a higher proportion of female managers tends to hinder CSR reputation. Furthermore, public environmental concern plays a more prominent role in improving CSR reputation of non-state-owned and eastern enterprises. Additionally, public environmental concern significantly enhances CSR reputation through green technology innovation and executive environmental awareness. This research provides valuable insights for improving CSR reputation and optimizing regulatory compliance and governance practices. [ABSTRACT FROM AUTHOR]