Search

Rising population levels exert significant pressure on available freshwater resources. Scientists and researchers from various countries are diligently seeking a long-lasting solution using solar-powered desalination. This research paper investigates the current advancements in solar desalination research by utilizing the method of "scientometrics". Scientometrics employs traditional methodologies, including bibliometrics, which entails quantifying the number of research papers published, and citation analysis, which involves examining the frequency with which other researchers cite these papers. By integrating these two approaches, scientometrics provides invaluable information about the most influential countries, institutions, and individual researchers in the field. Utilizing the software program VOSviewer, a comprehensive analysis was conducted on 1855 research papers published between 2010 and 2024. These papers were selected based on a predetermined set of ten key search terms. The results of the analysis indicate that China is the leading country in this field, as it boasts the highest number of published papers and the most citations received overall. Notably, Egyptian research institutions have been identified as the most influential in this area. Moreover, a single author has notably amassed 3419 citations for their 54 published works on solar desalination. This analysis unveiled past and contemporary advancements in the field and identified current trends through keyword analysis. It also offers recommendations based on bibliometric findings, including suggestions for addressing the challenges faced by solar-derived systems and addressing research area saturation. [ABSTRACT FROM AUTHOR]

The power sector is one of the major CO2-emitting industries in China. It is also the first key emissions control industry included in China's national carbon trading market established in 2021. Therefore, based on the data of 30 provinces and cities in China from 2015 to 2022, this study analyzes the impact of the national carbon market policy on the carbon emissions of the power industry based on the generalized Difference-in-Difference (DID) model. Based on the method of text analysis, this paper constructs the carbon market policy intensity index of each region and incorporates it into the DID model. Empirical analysis finds that the national carbon market policy can significantly inhibit the carbon emissions of the power industry. However, the heterogeneity analysis of 30 provinces and cities shows that the national carbon market policy has a significant impact on the regions that already have a carbon pilot, but not on the non-pilot regions. Therefore, this paper demonstrates the effectiveness of the national carbon market policy in the power industry emissions control, and also exposes the heterogeneity between regions, providing an important empirical basis for the inclusion of other energy-intensive industries. [ABSTRACT FROM AUTHOR]

China is currently focusing on the cooperative control of air pollution and CO2 emissions, as well as the mitigation of economic policy uncertainty (EPU). By using panel data from 282 cities spanning from 2003 to 2017 and a newly constructed city-level EPU index, a spatial Durbin, two-way fixed-effects model is employed, with the aim of estimating the impact of EPU on the synergistic emissions intensity (SEI) of air pollutants and CO2. Additionally, this paper investigates the potential channels through which EPU influences SEI. It also explores how pressures related to environmental protection and economic development affect the impact of EPU on SEI. The results indicate that a unit increase in EPU will result in a rise in the SEI of local cities, adjacent cities, and total cities by 930.9%, 69,162.7%, and 70,093.6%, respectively. Moreover, the channel analysis suggests that EPU exacerbates SEI by undermining the upgrading of the industrial structure, augmenting industrial structure distortion, and escalating labor market distortion. Furthermore, the effect of EPU on SEI may be lessened by an increase in environmental protection pressure, while an increase in economic development pressure may exert a positive influence. Finally, this paper concludes by recommending that policymakers should prioritize the maintenance and stability of economic policies, facilitate the advancement of the industrial structure, enhance the efficiency of labor resource allocation, and underscore the significance of managing urban air pollution and CO2 emissions. [ABSTRACT FROM AUTHOR]

A reasonable allocation of production schedules and savings in overall electricity costs are crucial for large manufacturing conglomerates. In this study, we develop an optimization model of off-site industrial production scheduling to address the problems of high electricity costs due to the irrational allocation of production schedules on the demand side of China's power supply, and the difficulty in promoting industrial and commercial distributed photovoltaic (PV) projects in China. The model makes full use of the conditions of different PV resources and variations in electricity prices in different places to optimize the scheduling of industrial production in various locations. The model is embedded with two sub-models, i.e., an electricity price prediction model and a distributed photovoltaic power cost model to complete the model parameters, in which the electricity price prediction model utilizes a Long Short-Term Memory (LSTM) neural network. Then, the particle swarm optimization algorithm is used to solve the optimization model. Finally, the production data of two off-site pharmaceutical factories belonging to the same large group of enterprises are substituted into the model for example analysis, and it is concluded that the optimization model can significantly reduce the electricity consumption costs of the enterprises by about 7.9%. This verifies the effectiveness of the optimization model established in this paper in reducing the cost of electricity consumption on the demand side. [ABSTRACT FROM AUTHOR]

To address the global warming issue, China is prioritizing the development of clean energy sources such as wind and solar power under its "dual carbon target". However, the expansion of these resources is constrained by their intermittency and the spatial and temporal distribution of wind and solar energy. This paper systematically reviews the evolution of wind and solar energy reserves, their development potential, and their current status in China from a geographical perspective. In conjunction with existing research, this paper anticipates future exploration in the realm of wind–solar complementary development or multi-energy complementary development, viewed through the lens of resource quantity. The anticipated findings are intended to furnish a theoretical foundation for further studies on the development and utilization of wind and solar energy resources within China. [ABSTRACT FROM AUTHOR]

On the basis of "Carbon Peak and Carbon Neutral" goals, carbon sequestration projects are increasing in China. The integrity of cement sheaths, as an important factor affecting carbon sequestration projects, has also received more attention and research. When CO2 is injected into the subsurface from sequestration wells, the cement sheath may mechanically fail due to the pressure accumulated inside the casing, which leads to the sealing of the cement sheath failing. The elasticity and strength parameters of the cement sheath are considered in this paper. The critical bottom-hole injection pressures of inclined well sections under anisotropic formation stresses at different depths were calculated for actual carbon-sealing wells in the X block—the CO2 sequestration target block. The sensitivity factors of the critical bottom-hole injection pressure were also analyzed. It was found that the cement sheath damage criterion was tensile damage. The Young's modulus and tensile strength of the cement sheath are the main factors affecting the mechanical failure of the cement sheath, with Poisson's ratio having the second highest influence. An increase in the Young's modulus, Poisson's ratio, and tensile strength of the cement sheath can help to improve the mechanical stability of cement sheaths in CO2 sequestration wells. This model can be used for the design and evaluation of cement in carbon sequestration wells. [ABSTRACT FROM AUTHOR]

Through extensive data research and analysis, this paper comprehensively summarizes the status and key insights of global carbon dioxide capture and storage (CCS) development. It aims to gain a comprehensive understanding of the relevant policies, technologies, and security measures adopted by major countries in their CCS development processes. Furthermore, it explores the existing status and limitations of China's offshore development efforts, while providing valuable recommendations for enhancing China's offshore CCS initiatives, as well as serving as a reference for other nations worldwide. Offshore CCS plays a crucial role for China to achieve the development target of carbon peak and carbon neutrality, due to its energy structure and industrial distribution. While China possesses significant offshore CCS potential, achieving commercialization still requires substantial efforts. To facilitate the process and draw insights from successful experiences in other countries, this paper illustrates the characteristics and generalizes the experience of offshore CCS industry practices in America, Europe and Japan, respectively. Furthermore, it is recommended that a new round of investigation into offshore CCS potential be conducted, while promoting integrated collaboration between geological surveying and marine scientific research. Additionally, further research on industrial policies and green financial strategies should be undertaken. [ABSTRACT FROM AUTHOR]

A predictive model for the spatiotemporal distribution of electric vehicle (EV) charging load is proposed in this paper, considering multimodal travel behavior and microscopic traffic simulation. Firstly, the characteristic variables of travel time are fitted using advanced techniques such as Gaussian mixture distribution. Simultaneously, the user's multimodal travel behavior is delineated by introducing travel purpose transfer probabilities, thus establishing a comprehensive travel spatiotemporal model. Secondly, the improved Floyd algorithm is employed to select the optimal path, taking into account various factors including signal light status, vehicle speed, and the position of starting and ending sections. Moreover, the approach of multi-lane lane change following and the utilization of cellular automata theory are introduced. To establish a microscopic traffic simulation model, a real-time energy consumption model is integrated with the aforementioned techniques. Thirdly, the minimum regret value is leveraged in conjunction with various other factors, including driving purpose, charging station electricity price, parking cost, and more, to simulate the decision-making process of users regarding charging stations. Subsequently, an EV charging load predictive framework is proposed based on the approach driven by electricity prices and real-time interaction of coupled network information. Finally, this paper conducts large-scale simulations to analyze the spatiotemporal distribution characteristics of EV charging load using a regional transportation network in East China and a typical power distribution network as case studies, thereby validating the feasibility of the proposed method. [ABSTRACT FROM AUTHOR]

In the context of China's new power system, various regions have implemented policies mandating the integration of new energy sources with energy storage, while also introducing subsidies to alleviate project cost pressures. Currently, there is a lack of subsidy analysis for photovoltaic energy storage integration projects. In order to systematically assess the economic viability of photovoltaic energy storage integration projects after considering energy storage subsidies, this paper reviews relevant policies in the Chinese photovoltaic energy storage market. It analyzes the cost and revenue composition of photovoltaic energy storage integration projects, and constructs a system dynamics model for the levelized cost of electricity (LCOE) of such projects. Taking a specific photovoltaic energy storage project as an example, this paper measures the levelized cost of electricity and the investment return rate under different energy storage scenarios. Combining energy storage allocation ratios and internal rate of return indicators, this paper analyzes the net present value of photovoltaic energy storage integration projects under different subsidy standards. The results indicate that, while the current energy storage subsidy policies positively stimulate photovoltaic energy storage integration projects, they exhibit a limited capacity to cover energy storage investment costs, thereby failing to incentivize capital market participation in the construction of such projects. Rational allocation of energy storage capacity and optimization of corresponding subsidy policies are crucial prerequisites for enhancing the economic viability and widespread adoption of photovoltaic energy storage integration projects. This study not only aids in investment decision making for photovoltaic power stations but also contributes to the formulation of energy storage subsidy policies. [ABSTRACT FROM AUTHOR]

Despite the pressure of carbon emissions and clean energy, coal remains the economic backbone of many developing countries due to its abundant resources and widespread distribution. The stable supply of coal is also vital for the global economy and remains irreplaceable in the future global energy structure. China has been a major contributor to annual coal output, accounting for nearly 50% worldwide since 2014. However, despite implementing intelligent coal mining technology, China's coal mining industry still employs over 1.5 million underground miners, posing significant safety risks associated with underground mining operations. Therefore, the introduction of coal mining robots in underground mines is an urgently needed scientific and technological solution for upgrading China's and even the world's coal energy industry. The working face needs a shearer, hydraulic support, a scraper conveyor, and other equipment for coordination. The deep integration of intelligent technology with factors such as "humans, machines, the environment, and management" in the workplace is the core content of intelligent coal mines. This paper puts forward an advanced framework for robot technology systems in coal mining, including single robots, robotized equipment, robot crowds, and unmanned systems. The framework clarifies the common key technologies of coal mining robot research and development and the cross-integration with new technologies such as 5G, the industrial internet, big data, artificial intelligence, and digital twins to improve the autonomous and intelligent application of coal mining robots. By establishing a scientific and complete standard system for coal mining robots, we aim to achieve the customized research and development and standardized production of various types of robot. A specific analysis is conducted on the research progress of common key technologies such as the explosion-proof design, mechanical system innovation, power drive, intelligent sensing, positioning and navigation, and underground communication of coal mining robots. The current research and application status of various types of coal mining robots in China are summarized. A new direction for future coal mining robot research and development is proposed. Robotic mining systems should be promoted to enhance the overall intelligence level and efficiency of mining equipment. To develop human–machine environment-integrated robots to improve the autonomy and collaboration level of coal mining robots, the digital twinning of the entire mine robot system should be accelerated; the normalized operation level of coal mine robots should be improved; research on coal mining robots, shield support robots, and transportation robots should be performed; intelligence should be achieved in fully mechanized mining faces; and equipment shield support for fully mechanized mining faces should be provided. The practical process of implementing coal mining robotization is summarized in this paper, and the technical and engineering feasibility of the coal mining machine population is verified. [ABSTRACT FROM AUTHOR]

Due to the serious problems with energy efficiency, carbon emissions, and thermal comfort of rural residences in northern China, an optimization of active and passive heating technologies for rural residences is necessary. In this paper, an optimization for rural residences in northern China is conducted with four objectives: the whole life cycle carbon emission; the annual energy consumption through heating, ventilation, and air conditioning systems; the annual cost; and thermal comfort. In addition, the optimization model with active–passive heating technology synergy is resolved by NSGA-II genetic algorithm. The active and passive design variables, including the type of air source heat pump, orientation, the type and thickness of envelope insulation, the layer of window glass, the window-to-wall area ratio, as well as sunspace parameters are preferred to obtain the optimal solution. The results indicate that the optimal solution obtained by the ideal point method gives the most outstanding performance. Compared with the prototype, the optimized carbon emissions in severe cold and cold regions decreased by 56.1% and 54.6%, respectively. The annual energy consumption decreased by 59.7% and 62.2%. Finally, the roof insulation thickness is the most sensitive design variable in Pareto-optimal solution sets. This paper offers significant guidance in the application of the optimization method of active–passive technology synergy to the energy-saving design of buildings. [ABSTRACT FROM AUTHOR]

With the increasing penetration of renewable energy resources, their variable, intermittent and unpredictable characteristics bring new challenges to the power system. These challenges require micro-meteorological data and techniques to provide more support for the power systems, including planning, dispatching, operation, and so on. This paper aims to provide readers with insights into the effects of micro-meteorology on power systems, as well as the actual improvement brought by micro-meteorology in some power system scenarios. This paper provides a review including the relevant micro-meteorological techniques such as observation, assimilation and numerical techniques, as well as artificial intelligence, presenting a relatively complete overview of the most recent and relevant micro-meteorology-related literature associated with power systems. The impact of micro-meteorology on power systems is analyzed in six different forms of power generation and three typical scenarios of different stages in the power system, as well as integrated energy systems and disaster prevention and reduction. Finally, a case study in China is provided. This case takes wind power prediction as an example in a power system to compare the performance when applying micro-meteorological data or not. The experimental results demonstrated that using the micro-meteorological reanalysis dataset with high spatial--temporal resolution for wind power prediction performed better, verifying the improvement of micro-meteorology to the power system to some extent. [ABSTRACT FROM AUTHOR]

There have been fruitful publications on thermal comfort of urban residential buildings in China. However, there is a lack of reviews on this topic to perform a comprehensive analysis and find opportunities to meet occupants' thermal comfort needs while improving building energy efficiencies. This paper addresses this issue by presenting a systematic review on the advancements in research on thermal comfort in urban residential buildings in China. Firstly, two common thermal comfort research approaches, i.e., field studies and laboratory studies, are discussed. Secondly, eleven main thermal comfort evaluation indicators are summarized. Finally, this paper analyzes the thermal comfort survey data from different researchers, discusses the impacts of adaptive behaviors on human thermal comfort, and provides recommendations for future research on urban residential thermal comfort. It was found that people have higher and higher requirements for their indoor thermal environment as time goes by, especially in the winter; the thermoneutral temperature is higher in warmer climate regions in the summer but lower in the winter than in colder climate regions; the thermoneutral temperature tends to increase with the indoor air temperature due to an adaptation to the indoor thermal environment. The outcomes of this paper provide valuable information on thermal comfort behaviors of urban residents in different climate zones in China, which can serve as a resource for the academic community conducting future research on thermal comfort and assist policymakers in enhancing building energy efficiencies without compromising the occupants' comfort. [ABSTRACT FROM AUTHOR]

Photovoltaic power generation prediction constitutes a significant research area within the realm of power system artificial intelligence. Accurate prediction of future photovoltaic output is imperative for the optimal dispatchment and secure operation of the power grid. This study introduces a photovoltaic prediction model, termed ICEEMDAN-Bagging-XGBoost, aimed at enhancing the accuracy of photovoltaic power generation predictions. In this paper, the original photovoltaic power data initially undergo decomposition utilizing the Improved Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (ICEEMDAN) algorithm, with each intrinsic mode function (IMF) derived from this decomposition subsequently reconstructed into high-frequency, medium-frequency, and low-frequency components. Targeting the high-frequency and medium-frequency components of photovoltaic power, a limiting gradient boosting tree (XGBoost) is employed as the foundational learner in the Bagging parallel ensemble learning method, with the incorporation of a sparrow search algorithm (SSA) to refine the hyperparameters of XGBoost, thereby facilitating more nuanced tracking of the changes in the photovoltaic power's high-frequency and medium-frequency components. Regarding the low-frequency components, XGBoost-Linear is utilized to enable rapid and precise prediction. In contrast with the conventional superposition reconstruction approach, this study employs XGBoost for the reconstruction of the prediction output's high-frequency, intermediate-frequency, and low-frequency components. Ultimately, the efficacy of the proposed methodology is substantiated by the empirical operation data from a photovoltaic power station in Hebei Province, China. Relative to integrated and traditional single models, this paper's model exhibits a markedly enhanced prediction accuracy, thereby offering greater applicational value in scenarios involving short-term photovoltaic power prediction. [ABSTRACT FROM AUTHOR]

In order to achieve the ambitious goal of "carbon neutrality", countries around the world are striving to develop clean energy. Against this background, this paper takes China and Italy as representatives of developing and developed countries to summarize the energy structure composition and development overview of the two countries. The paper analyzes the serious challenges facing the future energy development of both countries and investigates the possibilities of energy cooperation between the two countries, taking into account their respective advantages in energy development. By comparing the policies issued by the two governments to encourage clean energy development, this paper analyzes the severe challenges faced by the two countries' energy development in the future and combines their respective energy development advantages to look forward to the possibility of energy cooperation between the two countries in the future. This lays the foundation for China and Italy to build an "Energy Road" after the "Silk Road". [ABSTRACT FROM AUTHOR]

Since the power generation structures and load characteristics in each province in China are quite different, the distribution of peak regulating resources and demands are extremely imbalance. Restricted by a low power marketization degree, peak regulating resource shortages, and transmission channel blocks, the efficient utilization of new energy is facing greater pressures. In order to improve the mutual aid in regional power grids and to obtain more precise simulation results, this paper proposes a two-layer optimization dispatching model, considering the mutual aid of peak regulation resources between each province. It determines the optimal startup mode and the units' power output in each province and obtains the power output arrangements for all the units and the technical and economic indicators. The model and the solution method are original and innovative. And it effectively solved the unequal distribution problem between the peak regulating demands and resources of each provincial power grid. Finally, taking an actual regional power grid in China as an example, the simulation results show that the proposed model can significantly improve the utilization rate of new energy, which verifies the effectiveness and feasibility of the proposed model and methods presented in this paper. [ABSTRACT FROM AUTHOR]

The complexity and strong spatial and temporal characteristics of municipal solid waste (MSW) have made resource utilization a major challenge in establishing the life-cycle model of MSW. Based on the planning of the domestic "dual-carbon" target and the current status of the structural transformation of resource utilization, this paper summarizes the physicochemical properties of MSW in China by component, species, and region. The aim is to identify the physicochemical components of MSW in different regions of China, drawing on the research findings of various scholars. A total of 159 sets of MSW data were collected, including 90 sets of physical composition and 69 sets of elemental composition. These data were used to calculate the calorific value of MSW and determine the energy-recovery and power-generation potentials before and after MSW classification. The analysis estimates the volume of MSW requiring removal in different regions of China in 2021 and assesses the effectiveness of the energy-recovery potential (ERP) and power-generation potential (PGP) before and after MSW classification in these regions. The aim is to offer insightful guidance and recommendations for municipal waste-treatment strategies tailored to the diverse regions of China. [ABSTRACT FROM AUTHOR]

In recent years, the State Grid of China has placed significant emphasis on the monitoring of noise in substations, driven by growing environmental concerns. This paper presents a substation noise monitoring system designed based on an end-network-cloud architecture, aiming to acquire and analyze substation noise, and report anomalous noise levels that exceed national standards for substation operation and maintenance. To collect real-time noise data at substations, a self-developed noise acquisition device is developed, enabling precise analysis of acoustic characteristics. Moreover, to subtract the interfering environmental background noise (bird/insect chirping, human voice, etc.) and determine if noise exceedances are originating from substation equipment, an intelligent noise separation algorithm is proposed by leveraging the convolutional time-domain audio separation network (Conv-TasNet), dual-path recurrent neural network (DPRNN), and dual-path transformer network (DPTNet), respectively, and evaluated under various scenarios. Experimental results show that (1) deep-learning-based separation algorithms outperform the traditional spectral subtraction method, where the signal-to-distortion ratio improvement (SDRi) and the scale-invariant signal-to-noise ratio improvement (SI-SNRi) of Conv-TasNet, DPRNN, DPTNet and the traditional spectral subtraction are 12.6 and 11.8, 13.6 and 12.4, 14.2 and 12.9, and 4.6 and 4.1, respectively; (2) DPTNet and DPRNN exhibit superior performance in environment noise separation and substation equipment noise separation, respectively; and (3) 91% of post-separation data maintains sound pressure level deviations within 1 dB, showcasing the effectiveness of the proposed algorithm in separating interfering noises while preserving the accuracy of substation noise sound pressure levels. [ABSTRACT FROM AUTHOR]

This paper introduces an innovative cooperative model for energy efficiency retrofitting that incorporates carbon emission rights, addressing critical financial constraints in Energy Performance Contracting (EPC). By employing the fuzzy analytic hierarchy process (F-AHP) to evaluate risk assessment indicators and stakeholder contributions and utilizing the enhanced Shapley method for equitable benefit distribution, the model demonstrates significant improvements in financing and efficiency for energy conservation projects. The findings are as follows: (1) the energy efficiency retrofit model, which integrates carbon emission rights, effectively alleviates the financial constraints and fosters energy conservation and emission reduction in guaranteed-savings EPC projects; (2) the enhanced Shapley method is deemed appropriate for the equitable distribution of energy-saving benefits among stakeholders; (3) when compared with the traditional model and the benefit allocation-absent carbon rights, the energy-saving benefits of the energy efficiency retrofit model incorporating carbon emission rights are higher in individual and overall terms. The findings of this study offer a viable solution to financing challenges faced by stakeholders in such projects and delineate a pragmatic approach for enterprises to enhance energy efficiency and reduce emissions. [ABSTRACT FROM AUTHOR]

The conversion of coal-fired power plants to nuclear power stations is a potential method for decarbonizing coal power and offers a pathway for low-carbon development in China's power industry. This paper focuses on retrofitting China's coastal coal-fired power stations and compares the potential nuclear reactor technologies for the retrofit: China's mainstream pressurized water reactor and the commercially operated fourth-generation high-temperature gas-cooled reactor (HTGR). The analysis compares the degree of matching between the two technologies and coal-fired power stations in terms of unit capacity, thermal system parameters, unit speed, structural dimensions, and weight, which significantly impact the retrofit scheme. The results indicate that HTGR is more compatible with coal-fired power plants and is recommended as the type of nuclear reactor technology to be retrofitted. The study selected the 210 MWe High-Temperature Gas-Cooled Reactor Pebble-Bed Module (HTR-PM) as the reactor technology for retrofitting a typical 300 MW class subcritical coal-fired unit. Based on the concept of subcritical parameters upgrading, the potential analysis and strategy study of retrofit is carried out in terms of the turbine, the main heat exchange equipment, the main pumps, and the main thermal system pipelines in the conventional island. The results indicate that the conventional island of the HTR-PM nuclear power plant has significant potential for retrofitting, which can be a crucial research direction for nuclear retrofitting of coal-fired power plants. [ABSTRACT FROM AUTHOR]

The exploration of continental shale oil in China has made a breakthrough in many basins, but the pure shale type has only been found in the Qingshankou Formation, Gulong Sag, Songliao Basin, and the evaluation of shale oil occurrence and sweet spot faces great challenges. Using information about the total organic carbon (TOC), Rock-Eval pyrolysis, vitrinite reflectance (Ro), kerogen elemental composition, carbon isotopes, gas chromatography (GC), bitumen extraction, and component separation, this paper systematically studies the organic geochemical characteristics and shale oil occurrence at the Qingshankou Formation. The G1 well, which was cored through the entire section of the Qingshankou Formation in the Gulong Sag, was the object of this study. On this basis, the favorable sweet spots for shale oil exploration are predicted. It is concluded that the shale of the Qingshankou Formation has high organic heterogeneity in terms of organic matter features. The TOC content of the source rocks in the Qingshankou Formation is enhanced with the increase in the burial depth, and the corresponding organic matter types gradually changed from Ⅱ2 and Ⅱ1 types to the Ⅰ type. The distribution of Ro ranges from 1.09% to 1.67%, and it is the mature to high-mature evolution stage that generates a large amount of normal crude oil and gas condensate. The high-quality source rocks of good to excellent grade are mainly distributed in the Qing 1 member and the lower part of the Qing 2 member. After the recovery of light hydrocarbons and the correction of pyrolytic heavy soluble hydrocarbons, it is concluded that the occurrence state of shale oil in the Qingshankou Formation is mainly the free-state form, with an average value of 6.9 mg/g, and there is four times as much free oil as adsorbed oil. The oil saturation index (OSI), mobile hydrocarbon content, Ro, and TOC were selected to establish the geochemical evaluation criteria for shale oil sweet spots in the Qingshankou Formation. The evaluation results show that interval 3 and interval 5 of the Qingshankou Formation in the G1 well are the most favorable sections for shale oil exploration. [ABSTRACT FROM AUTHOR]

High-voltage heat release from batteries can cause safety issues for electric vehicles. Relevant scientific research work is carried out in the laboratory. The battery safety of laboratory experiments should not be underestimated. In order to evaluate the safety performance of batteries in the laboratory testing of driving conditions of electric vehicles, this paper simulated and compared the discharge characteristics of two common batteries (lithium iron phosphate (LFP) battery and nickel–cobalt–manganese (NCM) ternary lithium battery) in three different operating conditions. The operating conditions are the NEDC (New European Driving Cycle), WLTP (World Light Vehicle Test Procedure) and CLTC-P (China light vehicle test cycle) for normal driving of electric vehicles. LFP batteries have a higher maximum voltage and lower minimum voltage under the same initial voltage conditions, with a maximum voltage difference variation of 11 V. The maximum current of WLTP is significantly higher than NEDC and CLTC-P operating conditions (>20 A). Low current discharge conditions should be emulated in teaching simulation and experiments for safety reasons. The simulation data showed that the LFP battery had good performance in maintaining the voltage plateau and discharge voltage stability, while the NCM battery had excellent energy density and long-term endurance. [ABSTRACT FROM AUTHOR]

It is well known that the existing horizontal-well-drilling and hydraulic fracturing technology used to achieve large-scale, cost-effective production from immature to low–moderate-maturity continental shale in China, where the organic matter mainly exists in solid form, is fairly ineffective. To overcome the obstacles, in situ conversion technology seems feasible, while implementing it in the target layer along with estimating the amount of expected recoverable hydrocarbon in such shale formations seems difficult. This is because there are no guidelines for choosing the most appropriate method and selecting relevant key parameters for this purpose. Hence, based on thermal simulation experiments during the in situ conversion of crude oil from the Triassic Chang 73 Formation in the Ordos Basin and the Cretaceous Nenjiang Formation in the Songliao Basin, this deficiency in knowledge was addressed. First, relationships between the in situ-converted total organic carbon (TOC) content and the vitrinite reflectance (Ro) of the shales and between the residual oil volume and the hydrocarbon yield were established. Second, the yields of residual oil and in situ-converted hydrocarbon were measured, revealing their sensitivity to fluid pressure and crude oil density. In addition, a model was proposed to estimate the amount of in situ-converted hydrocarbon based on TOC, hydrocarbon generation potential, Ro, residual oil volume, fluid pressure, and crude oil density. Finally, a method was established to determine key parameters of the final hydrocarbon yield from immature to low–moderate-maturity organic material during in situ conversion in shales. Following the procedure outlined in this paper, the estimated recoverable in situ-converted oil in the shales of the Nenjiang Formation in the Songliao Basin was estimated to be approximately 292 × 108 tons, along with 18.5 × 1012 cubic meters of natural gas, in an area of approximately 8 × 104 square kilometers. Collectively, the method developed in this study is independent of the organic matter type and other geological and/or petrophysical properties of the formation and can be applied to other areas globally where there are no available in situ conversion thermal simulation experimental data. [ABSTRACT FROM AUTHOR]

With the energy structure transition and the development of the green power market, the role of electricity retailers in multi-market green power trading has become more and more important. Particularly in China, where aggressive green energy policies and rapid market transformations provide a distinct context for such studies, the challenges are pronounced. Under demand-side response, electricity retailers face the uncertainty of users' electricity consumption and incentives, which complicates decision-making processes. The purpose of this paper is to explore the optimization decision-making problem of multi-market green power trading for electricity retailers under demand-side response, with a special focus on the Chinese market due to its leadership in implementing substantial green energy initiatives and its potential to set precedents for global practices. We first construct a two-party benefit optimization model, which comprehensively considers the profit objectives for electricity retailers and utility maximization for users. Then, the model is solved by the Lagrange multiplier method and distributed subgradient algorithm to obtain the optimal solution. Finally, the effectiveness of the incentive optimization strategy under the multi-market to promote green power consumption and improve the profit of electricity retailers is verified by arithmetic simulation. The results of this study show that the incentive optimization strategy under multi-market, particularly within the Chinese context, is expected to provide a reference for electricity retailers to develop more flexible and effective trading strategies in the green power market and to contribute to the process of promoting green power consumption globally. [ABSTRACT FROM AUTHOR]

To qualify the risk of extreme weather events for power supply security during the long-term power system transformation process, this paper proposes a risk probability evaluation method based on probabilistic production simulation. Firstly, the internal relationship of extreme weather intensity and duration is depicted using the copula function, and the influences of extreme weather on power security are described using the guaranteed power output ability coefficient, which can provide the extreme scenario basis for probabilistic production simulation. Then, a probabilistic production simulation method is proposed, which includes a typical-year scenario and extreme weather events. Meanwhile, an index system is proposed to qualify the power security level, which applies the loss of load expectation (LOLE) and time of loss of load expectation (TOLE) under different scenarios and other indices to reveal the long-term power security trend. Finally, the long-term power supply risks for the Yunnan provincial power system are analyzed using the proposed method, validating that the proposed method is capable of characterizing the influences of extreme weather on power security. The security level of different long-term power transformation schemes is evaluated. [ABSTRACT FROM AUTHOR]

Ensuring optimal building performance is vital for enhancing student activity comfort and fostering energy-saving initiatives toward low-carbon objectives. This paper focuses on university student centers in China, aiming to diminish building energy consumption while enhancing indoor thermal comfort. Parametric modeling of typical cases is executed using the Grasshopper 1.0.0007 software package, and the simulation of building energy consumption and indoor thermal comfort relies on the Ladybug and Honeybee plug-in. Employing a multi-objective optimization design method and the Octopus multi-objective optimization algorithm, this study integrates numerical simulations and on-site surveys to analyze how factors like building form, orientation, envelope structure, and others impact the indoor and outdoor environment. A comprehensive optimization design approach is implemented for the building's exterior components, including the walls, windows, roof, and shading system. After conducting a comparative analysis of the annual comprehensive energy consumption and indoor thermal comfort before and after the optimization plan, it is determined that implementing these measures reduces the annual comprehensive energy consumption of the building under study by 58.8% and extends the duration of indoor thermal comfort by 53.0%. This study presents a practical optimization design methodology for university student center architecture in China, aiding architects in decision making and advocating for energy-efficient building designs. [ABSTRACT FROM AUTHOR]

With a significant share of renewable power generation integrated into the power supply, it is crucial to timely adjust the regulating peak load for coal-fired power plants equipped with CO2 capture to ensure the stable operation of the multi-energy supply system. In this paper, the effects of varying boiler loads on the techno-economic performance of the retrofitted power plant were studied. Furthermore, the potential for reducing the cost of CO2 capture was investigated, and early opportunities for demonstration were discussed. Results showed that when the boiler load decreased from 100% turbine heat acceptance condition to 50% turbine heat acceptance condition, the cost of CO2 capture increased from 37.0 $/t CO2 to 57.0 $/t CO2, cost contribution of energy penalty and extra capital investment also increased from 20.6 $/t-CO2 to 25.7 $/t-CO2, and from 16.4 $/t-CO2 to 31.3 $/t-CO2, respectively. Furthermore, by improving separation efficiency from 0.15 to 0.5, a 25% to 30% reduction in CO2 capture cost can be achieved. The cost of CO2 capture could decrease by 42.2–50.5% when the cumulative capacity reaches 250 GW under the high investment learning rate scenario. According to the distribution of coal prices and renewable energy sources in China, the early demonstration projects of multi-energy supply systems should prioritize the northern region. The results of this work can provide informative references for making roadmaps and policies for CO2 emission reduction toward carbon neutrality. [ABSTRACT FROM AUTHOR]

This paper takes a low-energy building in Changchun, China, as an object to test and study the characteristics of two heating modes, AC/DC (Alternative current/Direct current) switching and AC/DC synthesis, from the perspectives of temperature change, irradiation intensity, power generation, electricity consumption, etc. Firstly, the experimental research was conducted under two heating cable modes by establishing mathematical models and a test rig, and it was found that the photoelectric conversion efficiency on sunny, cloudy, and overcast days was 18%, 14.5%, and 12%, respectively. A simulation model was established by TRNSYS to run an ultra-low-energy building throughout the year. It was found that the highest and lowest monthly power generation occurred in February and July, respectively. The annual power generation of the system was 6614 kWh, and the heating season power generation was 3293.42 kWh. In the current research, the DC electricity consumption was slightly higher than the AC electricity consumption. Under conditions of similar radiation intensity and power generation, the indoor temperature of the AC/DC synthesis cable heating mode were 1.38% higher than the AC/DC switching heating able mode, and the electricity consumption were 10.9% and 4.76% higher, respectively, than those of the AC switching heating cable mode. This is of great significance for clean-energy heating, energy savings, and emissions reduction in northern China. [ABSTRACT FROM AUTHOR]

Amid China's pursuit of a green and low-carbon transition, corporate social responsibility (CSR) is facing new challenges. Our research delves into the influencing factors and mechanisms for CSR reputation under green and low-carbon transition and provides practical enlightenment for enterprises to achieve sustainable development. This paper constructs a comprehensive index system of CSR from five dimensions (innovation, coordination, sustainability, openness, and sharing), and CSR reputation of China's A-share listed companies is comprehensively estimated by using an entropy method and data from 2013 to 2021. Then, from the perspective of external supervision and internal governance, we discuss the influence factors of CSR reputation, with an emphasis on the impact of public environmental concerns. Finally, the realization mechanism of CSR is further revealed. It is found that public environmental concern and the expansion of the enterprise scale boost the enhancement of CSR reputation. However, a higher proportion of female managers tends to hinder CSR reputation. Furthermore, public environmental concern plays a more prominent role in improving CSR reputation of non-state-owned and eastern enterprises. Additionally, public environmental concern significantly enhances CSR reputation through green technology innovation and executive environmental awareness. This research provides valuable insights for improving CSR reputation and optimizing regulatory compliance and governance practices. [ABSTRACT FROM AUTHOR]

Heating buildings with solar energy is challenged by the seasonal mismatch between solar availability and heating demand. Thermochemical energy storage is a promising technology to overcome this challenge because of its high energy density. In building applications, space requirement is also an important consideration. Therefore, both the storage space and collector areas are important considerations, with only the latter often being neglected in previous studies. This paper proposes a novel two-stage thermochemical heat pump heating system based on the working pair of NaOH/H2O. We demonstrate that this system can work with a concentration difference (70% wt–30% wt) for the climate in hot summer and cold winter regions in China. The energy storage density based on the discharged solution is 363 kWh/m3. With this solar-driven thermochemical heat pump heating system, 35.13 m2 of collectors and 10.48 tons of 70% wt NaOH solution are sufficient to complete a full charge–discharge cycle and meet the heating demand of a single-family house (winter space heating + DHW: 9370 kWh, summer DHW: 2280 kWh). The theoretical maximum storage for solution (discharged + water tank) is 32.47 m3. Compared with the sensible seasonal storage alternative, the collector area is reduced by 12.5% and the storage space is reduced by 59%, with a possible further reduction through optimization. With the potential to be further optimized for space saving, the two-stage solar–NaOH heat pump heating system is an energy-efficient and space-efficient heating system for buildings in the hot summer and cold winter regions of China. [ABSTRACT FROM AUTHOR]

The renewable-dominant hybrid generation systems (HGSs) are increasingly important to the electric power system worldwide. However, influenced by uncertain meteorological factors, the operational robustness of HGSs must be evaluated to inform the associated decision-making. Additionally, the main factors affecting the HGS's robustness should be urgently identified under deep uncertainties, as this provides valuable guidance for HGS capacity configuration. In this paper, a multivariate stochastic simulation method is developed and used to generate uncertain resource scenarios of runoff, photovoltaic power, and wind power. Subsequently, a long-term stochastic optimization model of the HGS is employed to derive the optimal operating rules. Finally, these operating rules are used to simulate the long-term operation of an HGS, and the results are used to evaluate the HGS's robustness and identify its main sensitivities. A clean energy base located in the Upper Yellow River Basin, China, is selected as a case study. The results show that the HGS achieves greater operational robustness than an individual hydropower system, and the robustness becomes weaker as the total capacity of photovoltaic and wind power increases. Additionally, the operational robustness of the HGS is found to be more sensitive to the total capacity than to the capacity ratio between photovoltaic and wind power. [ABSTRACT FROM AUTHOR]

With large-scale grid-connected renewable energy, new power systems require more flexible and reliable energy storage power sources. Pumped storage stations play an important role in peak shaving, valley filling, and promoting renewable energy consumption. This paper presents the reasonable energy-abandonment operation of a combined power generation system (CPGS), in which a pumped storage station is the core control power, with an ultra-high proportion of renewable energy. Firstly, based on the seasonal characteristics of wind, solar, and load demand, typical days are selected through improved clustering analysis algorithms. Then, a daily optimal scheduling model for combined power generation systems (CPGS) is developed with the goals of economy, low-carbon, and stable operation. Finally, the correlation between the energy-abandonment rate and pumped storage station peak shaving and system optimization operation indicators is obtained by a reasonable energy-abandonment calculation method considering source-grid-load coordination. Taking the operation data of an energy base in the western region of China as an example, when the penetration rate of renewable energy is 60–70% in the future, the operating cost on the power side is greatly affected by the construction of the source side. When the system operates at a planned reasonable energy-abandonment rate of 2%, electricity regulation, load tracking, and daily operating costs all show better performance. [ABSTRACT FROM AUTHOR]

In recent years, atmospheric composite pollution has become increasingly serious, and accelerating VOC governance has become the focus of and difficulty in atmospheric governance. Volatile organic compounds (VOCs) come from a wide range of sources, and industrial sources are the main source of anthropogenic VOC emissions in China. Chemicals, oil refining, and solvents are three typical VOC-emitting industries, and their control is an important part of accelerating and optimizing VOC governance. It can be controlled by source control, process control, and pipe end treatment; among these, pipe end treatment is divided into recovery technology and destruction technology. In pipeline end treatment, with the key materials of adsorption, absorption, catalytic oxidation, and catalytic combustion, the research and development of adsorbents, absorbents and catalysts has become a hot spot in recent years. This paper summarizes the chemical materials used in typical VOC pipe end-treatment technology (including adsorbents used in the adsorption method, absorbents used in the adsorption method, and catalysts used in the catalytic oxidation and catalytic combustion methods), summarizes the advantages and disadvantages of various materials and their application range, and looks forward to the direction of future developments. [ABSTRACT FROM AUTHOR]

The demand for the power grid system's capacity to undergo peak-shaving is increasing as the proportion of renewable energy rises. In China, nuclear power units usually only provide a base load operation in the view of safety and economic considerations, but they do not provide load adjustment services, which undoubtedly increases the pressure of grid load adjustment. In this paper, a novel flexibility load adjustment strategy of the CHP nuclear unit is studied, which is achieved by introducing the thermal storage tank (TST) into the Rankine cycle without changing the output of the nuclear reactor. The AP1000 pressurized water reactor nuclear power unit for combined heat and power is taken as an example, and the thermodynamic model is established through the water vapor equation. Furthermore, the reference system is simulated for the goal of minimizing the imbalance between power supply and demand, and the flexibility–environment–economy benefits are evaluated. The results show that the heat storage/release of the TST may achieve power output flexible adjustment of the nuclear unit, and the power imbalance of the reference energy system is reduced from 1107.99 MWh to 457.24 MWh, a reduction of 58.73%. The introduction of a 600 MWh TST can enable the reference unit to contribute 335 MWh of peak electricity within the reference day. From the perspective of replacing the power generation output increment of coal-fired power units with equal amounts, it can achieve a reduction of 106.09 tons of coal consumption in the case day, which means that 277.73 tons of CO2 emissions can be reduced. The profit of the reference unit can be improved by CHY 70,125 via participating in load adjustment in the case day if following the time-of-use electricity price. [ABSTRACT FROM AUTHOR]

In pursuit of China's goals for carbon peak and carbon neutrality, wind turbines are continually evolving to achieve a lower levelized cost of energy. The primary technological focus in the wind power industry is on large-scale, lightweight designs for entire turbines to enhance cost competitiveness. However, this advancement has led to an increased risk of blade fractures under extreme operating conditions. This paper addresses this challenging issue by using geometrically exact beam theory to develop a nonlinear simulation model for long, flexible blades. The model accounts for sudden changes in blade properties at the moment of failure, covering both the extensive motions and deformations of the fractured blade. The validation of the proposed model is carried out by comparing the results from power production cases with bladed simulations and further validating the simulations of blade fracture load cases against measurement data. The methodologies and findings presented in this study offer valuable insights for diagnosing faults in wind turbines. [ABSTRACT FROM AUTHOR]

This paper presents an empirical investigation into the effects of energy transition and digitization on carbon dioxide emissions, serving as a proxy for environmental sustainability, across 28 Chinese provinces from 2000 to 2021. Utilizing both static and dynamic regression analyses, the study reveals a significant driving effect of the energy transition on environmental sustainability, primarily through a reduction in carbon dioxide emissions. Notably, this influence is more pronounced in the eastern region of China, followed by the central and western regions, indicating regional heterogeneity in the impact of the energy transition. Furthermore, digitization is found to have a substantial moderating effect, enhancing energy conservation and emission reductions. As digitization progresses, its capability to diminish the impact of energy transitions on carbon dioxide emissions becomes more apparent, particularly in the eastern region, while this effect is less marked in central and western China. The study also delves into the nonlinear relationship between energy transitions and carbon dioxide emissions, discovering that increased levels of digitization can exacerbate the negative effects of energy transitions on emissions. These findings offer valuable insights into the dynamics of energy transition and digitalization, highlighting their crucial roles in shaping environmental sustainability in China. [ABSTRACT FROM AUTHOR]

As the global demand for renewable energy continues to rise, biogas production has emerged as a promising solution for sustainable energy generation. This review article presents the advantages of biogas technologies (mainly agricultural, based on waste of animal and plant origin) and extensively discusses the main principles of biogas production in the anaerobic digestion (AD). In this respect, the main parameters of the process, which require monitoring and decisive for its efficiency are described, therefore: temperature, pH value, retention time and organic loading rate (OLR). The principles of substrate selection are also discussed and the necessity and advantages of the use of organic waste according to the model of a circular economy and the concept of sustainable development, are indicated. It is emphasized that according to the new European regulations, the crops classified as food cannot be considered energy crops. The part on biogas production is summarised with an explanation of the necessity to treat and purify biogas. Biogas purification is important from the point of view of the efficiency of its conversion into electricity. A special place in this paper is devoted to the design, construction, functioning and operation of biogas plants, based on both scientific and practical aspects. In conclusion of this chapter, the economic aspects and profitability of operating biogas plants are discussed. Cost and benefit analyses are the major tool used for the systematic evaluation of the financial costs and potential benefits associated with the operation of biogas plants. The important fact is that the return on investment can be achieved within a few years, provided the activities are well-planned and executed. In addition to the fundamental issues of the operation of biogas plants, this article presents the global situation regarding the development of biogas plants, discussing in detail the specific needs and limitations on different continents. It is a interesting and extensive part of this article. The global agricultural biogas market is at very different levels of development. Most such installations are located in Asia and Europe. China has the highest number of biogas plants, with more than 100,000 biogas plants, followed by Germany with over 10,000 plants. In addition to the 100,000 biogas plants, China also has a large number of household biogas units, which gives a total of approx. 40 million operating units. The article concludes with a discussion of opportunities and barriers to the development of biogas plants, pointing to: financial issues, access to feedstock, political regulations, public awareness and the geopolitical situation. The most frequently cited reasons for investment failure include economic problems, lack of professional knowledge. [ABSTRACT FROM AUTHOR]

The unconventional tight oil and gas resources in the Xinzhao East belt of the Hangjinqi Prospect area in the Ordos Basin of China are abundant. However, the reservoir's internal storage space is complex, and the microscopic pore throat structural features are not well recognized, which has led to some trouble in the deployment of oil and gas exploration. To reveal the microscopic characteristics of the dense sandstone gas layer in the first member of the Lower Stone Box Formation of the D-well Zone in the Xinzhao East belt of the Hangjinqi Prospect area, a three-dimensional space digital core was built, and the stored set spatial data were extracted, based on rock sheet and coring data and X-CT scanning technology. Quartz grain size was segmented and analyzed based on an adaptive approach. The microscopic characteristics of the gas layer in the studied section and the factors influencing its development were studied, combining the use of a field emission scanning electron microscope, helium porosimeter, and gas permeability meter. We found that in the studied section, the porosity is relatively high, the pore throat size is large, and the pore permeability correlation is good. The reservoir space, which consists of intergranular pores, intragranular pores, and microcracks at the grain edges in the study area, is characterized by a complex distribution pattern. Within the gas layer, isolated pores are connected by microcracks to form a network of reservoir spaces, which increases the pore throat size, enhances the connectivity of the pore throat, and makes the microscopic characteristics of the reservoir space better. The first member of the Lower Stone Box Formation could be an advantageous reservoir. Hole–throat connectivity is poor because of the gas layer having underdeveloped primary pores, the blockage of pores by unstable minerals (kaolinite, etc.), and poorly connected pore throats based on insoluble mud cementation. The high content of quartz brittle minerals and the development of natural microcracks within the gas formation are favorable conditions for fracking development. The quartz grain size within the gas layer is positively correlated with the pore throat size, which suggests that the quartz grain size somewhat influences the microscopic characteristics of the reservoir space. This comprehensive study shows that the methodology of the study is more advantageous than traditional methods in the fine and three-dimensional spatial characterization of the microstructure of dense sandstone reservoirs. The research results of this paper have certain guiding significance for further reservoir evaluation and advantageous reservoir prediction in the Hangjinqi Prospect area in the Ordos Basin. We also provide the basis for the subsequent efficient development of the gas reservoir. [ABSTRACT FROM AUTHOR]

Siliceous minerals of the Dengying Formation in the Gaoshiti–Moxi area in the central Sichuan Basin exhibit four types of quartz crystals (cryptocrystalline quartz, chalcedony, microcrystalline quartz, and megacrystalline quartz) and three structural types: cryptocrystalline, microcrystalline, and mosaic (laminated mosaic, window-hole interrupted mosaic, and arc-laminated mosaic). Siliceous minerals have a great influence on the storage performance of the reservoirs in the Dengying Formation. According to the petrophysical parameters of the Dengying Formation and porosity intersection diagrams, the siliceous dolomite and the reservoirs have low impedance characteristics, which makes it difficult to distinguish between them and leads to difficulties in the characterization and prediction of the reservoirs. The transverse wave velocity is favorable for reservoir characterization. Currently, the main method used to estimate the transverse wave velocity is petrophysical modeling, which establishes a relationship between the elastic and physical parameters of the reservoir. In this paper, the siliceous minerals in the dolomite in the study area are regarded as solid inclusions, and the calculation method of the rock matrix modulus is improved by using solid replacement. Then, an improved petrophysical model is constructed by combining the KT (Kuster–Toksöz) model, the DEM (Discrete Element Method) model, the Gassmann equation, and the Wood equation. The transverse wave velocity is estimated using the improved model under the constraint of the longitudinal wave velocity. The shapes of the transverse wave velocity curves obtained by the improved model and the deviations from the measured velocities are significantly better than those of the Xu–Payne model and other models. The results show that the improved model can effectively estimate the transverse wave velocity of the reservoir in this area, which provides a basis for future reservoir predictions in this area. [ABSTRACT FROM AUTHOR]

This study used a double machine learning model (based on the random forest algorithm) and spatial Durbin DIDs model to conduct quasi-natural experiments. The results are as follows: (1) innovation and reform policy regarding regional industrial chains as well as their resilience can significantly and positively address the development of China's impossible triangle coupling of energy; (2) implementing the innovation and reform policy for regional industrial chains in other regions can have a significant positive spatial transmission effect on the impossible triangle coupling coordinated development of energy in the region; (3) regional industrial chain resilience can produce a significant positive mediating effect between the innovation and reform policy of regional industrial chains and the safety, reliability, and economic feasibility of green and clean energy systems; (4) under the counterfactual framework, the mechanism path "innovation and reform policy of the regional industry chain→regional industry chain resilience→coordination degree of impossible triangle coupling of energy" has significantly positive direct and indirect effects in both the treatment group and the control group. However, "innovation and reform policy of the regional industrial chain→regional industrial chain resilience→the energy sector's impossible triangle coupling coordination degree" and "innovation and reform policy of the regional industrial chain→leading power of the regional industrial chain→the energy sector's impossible triangle coupling coordination degree" have significantly positive direct and indirect effects in the treatment group, but only the direct effect is significant in the control group. [ABSTRACT FROM AUTHOR]

Based on the panel data of China's 284 prefecture-level cities from 2006 to 2020, this study employs spatial econometric and geographically weighted regression models to systematically analyze the influencing factors and their spatial–temporal heterogeneity of urban transport carbon emissions. The findings reveal the following: (1) GDP per capita, population, urban road area, and private car per capita are important factors causing the increase in urban transport carbon emissions, while the improvement of urban density, public transportation effectiveness, and government environmental protection can mitigate emissions and promote low-carbon development in urban transportation. (2) The worsening impact of GDP per capita on urban transport carbon emissions shows a decreasing trend over time, forming a spatial gradient pattern of gradually increasing from southwest to northeast. However, a similar effect of population increase during the research period, which currently displays an increasing spatial differentiation from north to south in sequence. (3) As another key deteriorating urban transport carbon emission, the influencing degree of private car per capita has gradually decreased from 2006 to 2020 and represented certain spatial gradient patterns. (4) Although the urban road area is favorable to urban transport carbon reduction in the early stage, it gradually begins to change in an unfavorable direction. The urban density is the contrary, i.e., the increase in that begins to play a positive role in promoting the development of low-carbon transportation among more cities. In addition, the influence coefficient of the former also presents an increasing distribution characteristic from south to north. (5) The reduction effect of public transportation effectiveness and government environmental protection on transport carbon emissions are both gradually prominent, where the former also shows space inertia of "increasing gradient from north to south and from north to northeast". [ABSTRACT FROM AUTHOR]

In response to global climate change, China has committed to peaking carbon emissions by 2030 and achieving carbon neutrality by 2060, commonly known as the "30–60 Dual Carbon". Under the background of "30–60 Dual Carbon", this article takes the electric power industry, which is the main industry contributing to China's carbon emission, as the research object, explores the time and peak value of the carbon peak of the electric power industry, and analyzes whether carbon neutrality can be realized under the peak method, so as to get the carbon neutrality path of the electric power industry and serve as the theoretical basis for the formulation of relevant policies. The Environmental Kuznets Curve inspection and the relationship analysis are carried out, then the system dynamics model is constructed, the carbon emissions from 2020 to 2040 are simulated, and the peak time is predicted. Three different scenarios are set to explore the path of electricity carbon neutralization under the premise of a fixed peak. It is shown that Gross Domestic Product per capita index factors have the largest positive contribution, and thermal power share index factors have the largest negative contribution to electricity carbon emissions. Based on the current efforts of the new policy, carbon emissions can achieve the peak carbon emissions' target before 2030, and it is expected to peak in 2029, with a peak range of about 4.95 billion tons. After the power industry peaks in 2029, i.e., Scenario 3, from coal 44%, gas 9% (2029) to coal 15%, gas 7% (2060), where the CCUS technology is widely used, this scenario can achieve carbon neutrality in electricity by 2060. Adjusting the power supply structure, strictly controlling the proportion of thermal power, optimizing the industrial structure, and popularization of carbon capture, utilization, and storage technology will all contribute to the "dual carbon" target of the power sector. [ABSTRACT FROM AUTHOR]

The energy-consuming right trading policy (ECRTP) represents a significant initiative to promote the sustainable development of Chinese enterprises. This study employs the difference-in-differences methodology to analyze how ECRTP influences ESG performance based on data from A-share listed industrial enterprises in China from 2006 to 2020. The findings indicate that ECRTP effectively enhances corporate ESG performance, and this conclusion holds valid following a battery of robustness checks. Moreover, ECRTP improves corporate ESG performance by promoting green technological innovation and green perceptions among executives. Tests for heterogeneity show that the ECRTP exerts a more pronounced influence on ESG performance for enterprises located in regions with high public environmental awareness, heavily polluting industries, and coastal areas. This study broadens the literature on ECRTP effectiveness evaluation, providing valuable insights for refining the design of these policies, promoting their implementation, and facilitating the achievement of dual control targets for energy consumption. [ABSTRACT FROM AUTHOR]

An iterative tuning method for multi-band power system stabilizers is proposed, which utilizes the contoured controller Bode (CCBode) plot. The typical multi-band power system stabilizer, PSS4B, is conceptualized as a series connection of two filters: a band-pass filter and a phase compensator. The tuning process involves a space searching approach for the phase compensator to ensure its phase–frequency response remains within acceptable bounds. Subsequently, the CCBode plot is employed to adjust the magnitude–frequency response of the band-pass filter, thereby enhancing stability performance across a broad frequency range. The method proposed can be applied to the parameter design of the multi-band power system stabilizer PSS4B in the power system to suppress the low-frequency oscillations of the local mode and inter-regional mode in the system. The effectiveness of this proposed method is demonstrated through case studies of the four -machine/two-area system and the North China Power Grid. [ABSTRACT FROM AUTHOR]

The carbon emissions of the power industry account for over 50% of China's total carbon emissions, so achieving carbon peak and carbon neutrality in the power sector is crucial. This study aims to simulate the impacts of three energy policies—carbon constraints, the development of a high proportion of renewable energy, and carbon trading—on China's energy transition, economic development, and the power sector's energy mix. Through the construction of a dynamic computable general equilibrium (CGE) model for China and its integration with the SWITCH-China electricity model, the impact of diverse energy policies on China's energy transition, economic progress, and the power mix within the electricity industry has been simulated. The integration of the SWITCH-China model can address the limitations of the CGE model in providing a detailed understanding of the specific intricacies of the electricity sector. The results indicate that increasing the stringency of carbon restrictions compels a reduction in fossil energy use, controlling the output of coal-fired power units, and thereby reducing carbon emissions. The development of a high proportion of renewable energy enhances the cleanliness of the power sector's generation structure, further promoting the national energy transition. Implementing a carbon trading policy, where the entire industry shares the burden of carbon reduction costs, can effectively mitigate the economic losses of the power sector. Finally, the policies to further enhance the implementation of carbon trading policies, strengthen effective governmental regulation, and escalate the deployment of renewable energy sources are recommended. [ABSTRACT FROM AUTHOR]

This study investigates the application of advanced simulation and modeling technologies to optimize the performance and reliability of renewable energy systems. Given the urgent need to combat climate change and reduce greenhouse gas emissions, integrating renewable energy sources into existing infrastructure is essential. Using bibliometric methods, our research spans from 1979 to 2023, identifying key publications, institutions, and trends. The analysis revealed a significant annual growth rate of 16.78% in interest in simulation and modeling, with a notable surge in published articles, reaching 921 in 2023. This indicates heightened research activity and interest. Our findings highlight that optimization, policy frameworks, and energy management are central themes. Leading journals like Energies, Energy, and Applied Energy play significant roles in disseminating research. Key findings also emphasize the importance of international collaboration, with countries like China, the USA, and European nations playing significant roles. The three-field plot analysis demonstrated interconnections between keywords, revealing that terms like "renewable energy sources", "optimization", and "simulation" are central to the research discourse. Core funding agencies, such as the National Natural Science Foundation of China (NSFC) and the European Union, heavily support this research. This study underscores the importance of policies and sustainability indicators in promoting renewable energy technologies. These insights emphasize the need for ongoing innovation and interdisciplinary collaboration to achieve a sustainable energy future. [ABSTRACT FROM AUTHOR]

This study proposes four kinds of hybrid source–grid–storage systems consisting of photovoltaic and wind energy, and a power grid including different batteries and hydrogen storage systems for Sanjiao town. HOMER-PRO was applied for the optimal design and techno-economic analysis of each case, aiming to explore reproducible energy supply solutions for China's industrial clusters. The results show that the proposed system is a fully feasible and reliable solution for industry-based towns, like Sanjiao, in their pursuit of carbon neutrality. In addition, the source-side price sensitivity analysis found that the hydrogen storage solution was cost-competitive only when the capital costs on the storage and source sides were reduced by about 70%. However, the hydrogen storage system had the lowest carbon emissions, about 14% lower than the battery ones. It was also found that power generation cost reduction had a more prominent effect on the whole system's NPC and LCOE reduction. This suggests that policy support needs to continue to push for generation-side innovation and scaling up, while research on different energy storage types should be encouraged to serve the needs of different source–grid–load–storage systems. [ABSTRACT FROM AUTHOR]

High-efficiency and low-emissions heavy-duty (HD) internal combustion engines (ICEs) offer significant GHG reduction potential. Mild hybridization via regenerative braking and enabling the use of an electric heater component (EHC) for the aftertreatment system (ATS) warm-up extends these benefits, which can mitigate tailpipe GHG and NOx emissions simultaneously. Understanding such integrated hybrid powertrains is essential for the system optimization of real-world driving conditions. In the present work, the potential of a low engine-out NOx (1.5–2.5 g/kWh range) 'Low-NOx' HD diesel engine and EHCs were analyzed in a 48V P1 mild-hybrid system for a class 8 commercial vehicle concept and compared with those in an EPA-2010-certified HD diesel truck as a baseline under real-world driving cycles, including those from the US, Europe, India, China, as well as the world harmonized vehicle cycle (WHVC). For analysis, an integrated 1-D vehicle model was utilized that consisted of models of the 'Low-NOx' HD engine, the stock ATS, and a production EHC. For the real driving cycles, 'GT-RealDrive'-based vehicle speed profiles were generated for busy trucking routes for different markets. For each cycle, the effects of the Low-NOx and EHC performances were quantified in terms of the ATS warm-up time, engine-out NOx emissions, and net fuel consumption. Depending on the driving route, the regenerative braking fully or partly neutralized the EHC power penalty without a significant impact on the ATS thermal performance. For a two-EHC system, the fueling penalty associated with every second reduction in the warm-up time F C E H C (g/s) was several-fold higher for the real driving routes compared with the WHVC. Overall, while a multi-EHC setup accelerated the ATS warm-up, a single EHC integrated at the SCR inlet showed minimized EHC heating power, leading to a minimized fueling penalty. Finally, for the India and China routes, being highly transient, the P1 hybridization proved inadequate for GHG reduction due to the limited energy recuperation. A stronger hybridization was desirable for such driving cycles. [ABSTRACT FROM AUTHOR]

CO2 is being considered as an effective alternative working fluid for geothermal applications due to its superior fluid dynamics and heat transfer properties compared to water. Utilizing sedimentary rocks for geothermal energy recovery through a CO2-plume geothermal system, especially in carbonate reservoirs, has been shown to be a practical approach that eliminates the need for hydraulic fracturing. However, uncertainties remain regarding the thermal and hydraulic behavior, particularly the chemical interactions between CO2 and carbonate rocks. This study develops a comprehensive wellbore–reservoir coupling reactive transport model based on specific information obtained from the Ordovician limestone geothermal reservoir in Shandong, China. The model aims to assess the feasibility of heat extraction in carbonate reservoirs by evaluating the heat extraction performance and fluid–rock interaction. The results indicate a rapid temperature drop after CO2 breakthrough due to the Joule–Thomson effect. Simultaneously, the fluid transitions into and maintains a two-phase state throughout the operation. Chemical reactions within the reservoir are not aggressive since complete mixing between unsaturated water and CO2 only occurs in the vicinity of the production well, highlighting the potential of utilizing carbonate reservoirs for efficient heat extraction in geothermal systems. Further research is needed to optimize the performance of CO2-based geothermal systems in carbonate reservoirs. [ABSTRACT FROM AUTHOR]

Climate change has a significant impact on human economic and social life, and climate issues have rapidly emerged as a global hot topic. Using data from prefecture-level cities in China from 2005 to 2020 as a sample, this study explores the relationship between climate policy uncertainty (CPU) and urban green total factor energy efficiency (GTFEE). The results show that, first, the CPU can significantly improve urban GTFEE, and results are reconfirmed after various robustness tests. Second, the CPU promotes urban GTFEE by improving public environmental concerns and optimizing the energy consumption structure. Third, the promotion role of CPU in urban GTFEE is particularly significant in resource-based cities and economically developed cities. The results of this study provide a theoretical basis and practical enlightenment for the government to formulate forward-looking climate policies and promote the transformation of green development in cities. [ABSTRACT FROM AUTHOR]