Search

A key challenge in prevention of global warming is how to increase energy efficiency, to be able to deal with increased fossil CO2 emissions from rising energy usage. Increasing energy efficiency will decrease energy usage and is in a key role in emission mitigation. The focus is the pulp and paper industry, which is energy-intensive. Development of industrial energy efficiency has been studied before but the role of industrial transformation is still mostly unknown. The knowledge must be improved, to be able to predict future developments in the most effective way. In this research, impact of various production unit closures and start-ups on energy efficiency of the Finnish pulp and paper industry were studied utilizing statistical analysis. Results indicate that about 20% of the Finnish pulp and paper industry energy efficiency improvement between 2011 and 2017 is caused by the major structural changes. The rest, 80% of the progress, was mainly due to improved technology and more optimal operational modes. Additional findings suggest that modern mill start-ups have a significantly greater potential to reduce energy consumption than old mill closures. [ABSTRACT FROM AUTHOR]

Aiming at the problem of the narrow combustion stability boundary, a conical swirler was designed and constructed based on the concept of fuel distribution. The blowout performance was studied at specified low operating conditions by a combination of experimental testing and numerical simulations. Research results indicate that the technique of the fuel distribution can enhance the combustion stability and widen the boundary of flameout within the range of testing conditions. The increase of the fuel distribution ratio improves the combustion stability but leads to an increase in NOx emission simultaneously. The simulation results show the increase of the fuel distribution ratio causes contact ratio increase in the area of lower reference velocity and gas temperature increase. The increased contact ratio and temperature contribute to the blowout performance enhancement, which is identical to the analysis result of the Damkohler number. The reported work in this paper has potential application value for the development of an industrial burner and combustor with high stability and low NOx emission, especially when the combustion system is required to be stable and efficient at low working conditions. [ABSTRACT FROM AUTHOR]

This paper presents the relationship between the factors of the industrialization of oil and gas scientific and technological achievements. These have established the internal coupling model and the external coupling model among the factors of the industrialization of oil and gas scientific and technological achievements. As revealed in the process of the industrialization of oil and gas scientific and technological achievements, there is a mutual influence between the factors. The actual data is used to simulate the internal coupling and the coupling between the factors of the industrialization of oil and gas scientific and technological achievements. The results show that the degree of the internal coupling and the coupling between the factors changes from coupling dissonance to a coordination state, indicating that the coupling of the factors of the industrialization of oil and gas scientific and technological achievements are enhanced. Results are presented the degree of internal coupling and coupling coordination of each factor basically changed from coupling dissonance to coordination state, indicating that the coupling of the elements in the industrialization of oil and gas scientific and technological achievements is synergistic. In conclusion, attention was drawn to strengthen the interaction between the subject of the industrialization of oil and gas scientific and technological achievements, integrate the industrialization resources of oil and gas scientific and technological achievements, improve the environment for the industrialization of oil and gas scientific and technological achievements, and improve the management system for the industrialization of oil and gas scientific and technological achievements, which can promote the development of the industrialization of oil and gas scientific and technological achievements. [ABSTRACT FROM AUTHOR]

Industrial development cannot be separated from policy guidance and support. Scientific evaluation and analysis of wind power industrial policies can promote the sustainable and healthy development of the industry, which has great significance to accelerate the green and low-carbon transformation of energy and achieve the double carbon target. In this paper, based on 66 wind power industrial policies from 2010 to 2021 in China, the policy texts were coded and classified into policy tools. By combining the text mining technology with the Policy Modeling Consistency (PMC) index model, 10 groups of evaluation index systems were established to evaluate the industrial policies quantitatively. The results show that the use of the three types of policy tools is unbalanced. Among them, environmental policy tools are used most frequently while supply and demand policy tools are relatively few. According to the PMC score, the overall situation of wind power industrial policy has certain scientific qualities. However, there are few policy texts for ordinary residents in terms of policy recipients, and there are shortcomings in technical support and talent construction. In addition, the three types of policy tools have certain limitations in different aspects. Based on the existing problems, we put forward suggestions for policy improvement. [ABSTRACT FROM AUTHOR]

The German federal state of North Rhine-Westphalia (NRW) is home to one of the most important industrial regions in Europe, and is the first German state to have adopted its own Climate Protection Law (CPL). This paper describes the long-term (up to 2050) mitigation scenarios for NRW's main energy-intensive industrial sub-sectors which served to support the implementation of the CPL. It also describes the process of scenario development, as these scenarios were developed through stakeholder participation. The scenarios considered three different pathways (best-available technologies, break-through technologies, and CO2 capture and storage). All pathways had optimistic assumptions on the rate of industrial growth and availability of low-carbon electricity. We find that a policy of "re-industrialisation" for NRW based on the current industrial structures (assumed here to represent an average growth of NRWs industrial gross value added (GVA) of 1.6% per year until 2030 and 0.6% per year from 2030 to 2050), would pose a significant challenge for the achievement of overall energy demand and German greenhouse gas (GHG) emission targets, in particular as remaining efficiency potentials in NRW are limited. In the best-available technology (BAT) scenario CO2 emission reductions of only 16% are achieved, whereas the low carbon (LC) and the carbon capture and storage (CCS) scenario achieve 50% and 79% reduction respectively. Our results indicate the importance of successful development and implementation of a decarbonised electricity supply and breakthrough technologies in industry-such as electrification, hydrogen-based processes for steel, alternative cements or CCS-if significant growth is to be achieved in combination with climate mitigation. They, however, also show that technological solutions alone, together with unmitigated growth in consumption of material goods, could be insufficient to meet GHG reduction targets in industry. [ABSTRACT FROM AUTHOR]

The rapid economic growth after the new millennium could be characterized by the reappearance of heavy industrialization and land urbanization. In the literatures, extensive studies have examined the impact of energy and emissions on the growth quality during the heavy industrialization process, but few have paid attention to the land dimension. This paper aims at studying the role of land use in changing the total-factor efficiency (TFE) in China's regional economy, together with the energy factors. The basic conclusions obtained are as follows: (1) the land and energy factors do have a statistically significant influence on the total-factor integrated efficiency (TFIE), leading to a much lower and not improved efficiency performance in the sample period. The integrated efficiency is dominated by the land factor rather than energy ones; and (2) the total-factor land efficiency (TFLE) is lower than the energy efficiency and has more room to improve. The land factor has a statistically significant influence on the total-factor energy efficiency (TFEE) but not vice versa. As compared to single-factor efficiency, the total-factor energy/land efficiency provides us a more precise measure of factor efficiency in China. [ABSTRACT FROM AUTHOR]

Carbon sources and sinks as a result of land use and land cover changes (LUCC) are significant for global climate change. This paper aims to identify and analyze the temporal and spatial changes of land use-based carbon emission in the Hubei Province in China. We use a carbon emission coefficient to calculate carbon emissions in different land use patterns in Hubei Province from 1998 to 2009. The results indicate that regional land use is facing tremendous pressure from rapid carbon emission growth. Source:sink ratios and average carbon emission intensity values of urban land are increasing, while slow-growing carbon sinks fail to offset the rapidly expanding carbon sources. Overall, urban land carbon emissions have a strong correlation with the total carbon emissions, and will continue to increase in the future mainly due to the surge of industrialization and urbanization. Furthermore, carbon emission in regions with more developed industrial structures is much higher than in regions with less advanced industrial structures. Lastly, carbon emission per unit of GDP has declined since 2004, indicating that a series of reform measures i.e., economic growth mode transformation and land-use structure optimization, has initiated the process of carbon emission reduction. [ABSTRACT FROM AUTHOR]

The industrial sector dominates the global energy consumption and carbon emissions in end use sectors, and it faces challenges in emission reductions to reach the Paris Agreement goals. This paper analyzes and quantifies the relationship between industrialization, energy systems, and carbon emissions. Firstly, it forecasts the global and regional industrialization trends under Representative Concentration Pathway (RCP) and Shared Socioeconomic Pathway2 (SSP2) scenarios. Then, it projects the global and regional energy consumption that aligns with the industrialization trend, and optimizes the global energy supply system using the Model for Energy Supply Strategy Alternatives and their General Environmental Impact (MESSAGE) model for the industrial sector. Moreover, it develops an expanded Kaya identity to comprehensively investigate the drivers of industrial carbon emissions. In addition, it employs a Logarithmic Mean Divisia Index (LMDI) approach to track the historical contributions of various drivers of carbon emissions, as well as predictions into the future. This paper finds that economic development and population growth are the two largest drivers for historical industrial CO2 emissions, and that carbon intensity and industry energy intensity are the top two drivers for the decrease of future industrial CO2 emissions. Finally, it proposes three modes, i.e., clean supply, electrification, and energy efficiency for industrial emission reduction. [ABSTRACT FROM AUTHOR]

China's industrial sector generally relies on electricity as its main source of energy, and industrial production can be affected if there are problems with the electricity supply. In order to deal with the uncertain electricity supply and achieve the "dual carbon" target, the industrial sector needs to take effective measures to enhance carbon total factor productivity (CTFP). We use the biennial Luenberger productivity index (BLPI) to try to provide strategies for low-carbon industrial development in China. The results indicate that the overall CTFP of China's industrial sector showed an increasing trend from 2006 to 2019. Technology change was the main contributor to the change in CTFP, but fluctuations in efficiency change remained a challenge. Differences were observed between the light industry sector (LIS) and the heavy industry sector (HIS) in terms of changes in CTFP, with LIS showing more stable changes and HIS experiencing larger fluctuations. Most sub-sectors showed increased CTFP during the sample period. R&D investment and R&D personnel have a positive impact on CTFP, while energy structure is found to hinder CTFP. According to the research results of this study, we offer the corresponding policy implications. This study is the first to explore the balance between low-carbon goals and industrial production from the perspective of improving CTFP, providing a new viewpoint on the contributions of technological innovation to solving socio-economic issues. [ABSTRACT FROM AUTHOR]

Improving energy efficiency is vital for addressing climate change and reducing carbon emissions in emerging economies. Financial development (FD) is crucial for economic growth, and its environmental impact and the adjustment of the industrial structure (IND) is a crucial lever in China's economic transition period. This study explored the relationship between FD, IND, and China's green total factor productivity (GTFEE) from 2000 to 2020 using the super-efficiency SBM-undesirable model, which estimates China's GTFEE. The ARDL results suggest that FD and IND enhance GTFEE in the long term, with FD promoting GTFEE by facilitating industrial structure adjustments. The Dumitrescu–Hurlin panel causality tests supported this finding. The QRPD panel quantile regression and heterogeneity analysis revealed significant heterogeneity in the effects. With increasing GTFEE, FD exerts a restraining effect, gradually weakening and transitioning into a promoting effect, while the IND consistently plays a promoting role. [ABSTRACT FROM AUTHOR]

Currently, due to the recent unprecedented urbanization and industrialization, energy consumption in China is increasing at an enormous speed. However, this process should go hand in hand with sustainable energy development that is based on three interconnected dimensions: (i) energy security, (ii) energy affordability, and (iii) environmental sustainability. It becomes very obvious that an increase in energy efficiency leads to the increase in both energy security and environmental sustainability. Therefore, inadequate energy efficiency causes energy security and environmental sustainability issues, and thus negatively influences economic development of China (or any other country for that matter). This paper explores the intrinsic relationship among urbanization, industrialization, and energy security, as well as the influencing mechanisms of urbanization and industrialization on energy efficiency using a fixed effect model. The paper employs panel data from 30 provinces in mainland China collected in the time range from 2006 to 2015. Our results demonstrate that urbanization and industrialization can significantly improve energy efficiency. Although energy security level decreases considerably with the rise of energy consumption and population growth, the increase in urbanization and industrialization levels can increase energy security through energy efficiency improvements. Moreover, it appears that changes in disposable income and population structure do not alter the effects of industrialization and urbanization on energy security. We conclude that Chinese provinces with high and low urbanization levels should focus on technological innovation and increase industrial development and technological input, respectively. Local governments in China can formulate policies and regulations and promote urbanization according to local economic development and industrial and population structure. The paper also presents theoretical references and decision support that might help in developing local laws and regulations promoting energy efficiency during urbanization and industrialization. [ABSTRACT FROM AUTHOR]

This study examines the relationship between urbanization, economic growth, industrial transformation, technological change, public services, demographical change, urban and natural environmental changes, and carbon emissions using a dataset of 182 prefecture-level cities in China between 2001 and 2010. Specifically, this paper differs from previous studies in two aspects. First, the extant literature has focused on how economic processes accompanying rapid urbanization affect carbon emissions in urban areas but gives little attention to the other dimensions of urbanization, including social and environmental changes, which may have important effects on carbon emissions. We assessed the effects of 17 key processes accompanying urbanization in a full range of economic, social, and environmental dimensions on carbon dioxide emissions in urban areas. The results showed that social processes accompanied with rapid urbanization had distinct effects on carbon emissions, compared to economic and environmental processes. Specifically, improvement in public services, indicated by education and cultural developments, reduces the increase in carbon emissions during urbanization, while economic growth and urban construction reinforces the growth in carbon emissions. Second, we examined the impact of various urbanization processes on carbon dioxide emissions using a unique dataset of 182 prefecture-level cities that covers a wide span of regions in China. The results of our analyses on the city level have important implications for the formulation of comprehensive policies aimed at reducing carbon dioxide emission in urban areas, focusing on different urbanization processes in economic, social, and environmental phases. [ABSTRACT FROM AUTHOR]

This paper lays out the role of the first centre in the world for the integration into the electrical grid of electricity coming from renewable energy (the Spanish acronym for which is CECRE (Centro de Control de Energías Renovables; Control Centre for Renewable Energies)) and the industrial development of large energy suppliers and wind turbine manufacturers in Spain. These two initiatives enabled the development of one of the first integrated markets for this type of energy source. The key contributions were the development of two software programs (wind management and management of solar light incidence), their visual implementation, and centralized digital control. An economic and business history approach is used to show the rise and relative failure of the Spanish wind industry during the period 2004–2015, when Spain became the fourth country after China, the US, and Germany in terms of installed capacity of renewable energy and, in relative terms, the second country after Denmark. This study is unique in that it provides an integrated vision of the reasons for the relative fall of Spain in the world ranking of wind energy producers. The methodology of the economic analysis of industrial policies makes it possible to explain the fall in the relative importance of Spain in the international panorama of wind farms. [ABSTRACT FROM AUTHOR]

The development of the tertiary industry is of great significance for promoting industrial structure, optimizing and upgrading it, and achieving regional energy conservation and emission reduction goals. This study adopts a quantitative method to analyze the spatio-temporal pattern of carbon emissions from China's tertiary industry from 2004 to 2019. In order to analyze emissions from aspects such as energy structure, energy intensity, energy carrying capacity, industrial structure, level of industrial development, income level, consumption capacity, energy consumption intensity, and population size, this study establishes a hybrid factor decomposition model called the "energy-industry-consumption" research framework. The study shows that carbon emissions from China's tertiary industry have been increasing year by year from 2004 to 2019, with a growth rate of 353.10%. Transportation is the largest contributor to the increase in carbon emissions from China's tertiary industry. The carbon emissions from the tertiary industry in each province show four types: high-speed growth, low-speed growth, fluctuating growth, and stable growth. During the study period, carbon emissions produce a spatial heterogeneity with the highest emissions in the south and lowest in the northwestern part of China. The spatial pattern of per capita carbon emissions is not significant. Guangdong has the highest carbon emissions, and Shanghai and Beijing have higher per capita carbon emissions. Industrial factors and consumption factors have a positive effect on carbon emissions in China's tertiary industry, while energy factors have a negative effect. The leading factor of carbon emissions in China's tertiary industry has gradually shifted from energy to industry. [ABSTRACT FROM AUTHOR]

Post-war industrialized housing between 1955 and 1985 in Belgrade and its special form of integrated prefabrication has been analyzed with a strong interest in transformation capacity of industrialized building model (IBM) on different technical levels. Research field is massive housing up to 23 floors, 400 dwellings per building and different housing layouts—to be evaluated for potential retrofitting at the dwelling level. IBM for massive housing built with IMS construction technology represents an integration of systems' components into hierarchy assemblies by simple joints. IMS Building Technology by IMS Institute is the system for high-rise structures with prefabricated elements of the skeleton. In order to assess the current situation regarding the selection and implementation of energy savings measures and the role of industrialized technology in supporting the rehabilitation of post-war housing in Belgrade—building configuration model and IMS construction technology has been analyzed, providing in-depth information on the way building components and systems are put together into IBM. In which way retrofit may be approached? IBM is represented with graph model (GM) diagram to describe a number of value-added processes according to independent systems/components and flexible connections. This paper highlights the technological aspects of "open" prefabrication industry and building with the systems that should be assessed in the future retrofitting of massive housing based on industrialization and energy efficiency. The paper proposes an IBM that provides concrete description of massive housing buildings, the requirements for information to be provided to approving refurbishment processes. The research also addresses both: challenges as well as opportunities for advancing Building Information Modeling (BIM) standards in off-site re-construction of massive housing with new "infill" industry. [ABSTRACT FROM AUTHOR]

Researchers and practitioners argue that in the global context of the Fourth Industrial Revolution, also labelled Industry 4.0, the regional dimension of industrial development remains equally essential. A region that effectively implements the concept of Industry 4.0 can accelerate by enhancing the manufacturing energy efficiency, thus contributing to the goals of the "Green Deal" policy. Therefore, to support the policy-making process, it is necessary to develop analytical tools exploring the determinants of the Industry 4.0 development. This paper presents a methodology of strategic analysis of a region in terms of the Industry 4.0 development potential. The core of the methodology is an extended Strengths, Weaknesses, Opportunities, and Threats (SWOT) analysis. The study identifies regional strengths and weaknesses, external incentives and disincentives, internal opportunities and threats, and external opportunities and threats with regard to the development of Industry 4.0, related technologies and the potential of increasing manufacturing energy efficiency. The research procedure is exemplified by the case of Podlaskie Voivodeship in Poland. The results of this study demonstrate the robustness of the proposed approach. The elaborated methodology can be used by decision-makers in designing strategies for the development of fourth-generation industry at a regional level. [ABSTRACT FROM AUTHOR]

The global economy is moving into a new era characterized by digital and green development. To examine the impact of digital industrialization development on the energy supply chain, in relation to the sustainable development of China's energy security, we discuss the nonlinear impact and transmission mechanism of digital industrialization on the supply chain of the energy industry using a panel threshold regression model based on sample data on the development of the provincial natural gas industry in China from 2006 to 2020. We found that there are multiple threshold effects of digital industrialization level development on energy supply chain length, and the results are statistically significant, i.e., digital industrialization development positively contributes to natural gas supply chain length after digital industrialization is raised to or crosses the critical threshold. Meanwhile, the heterogeneity analysis results show that there are differences in the impact of digital industrialization on the energy supply chain from sub-sectors, regional development differences, and different development periods. Therefore, we provide some factual support and experience for achieving the construction goal of "Digital China" and accelerating the digital reform of the energy supply chain as well as transforming and upgrading the economic structure. [ABSTRACT FROM AUTHOR]

The continuous development in the field of industrial automation and electric mobility has led to the need for more efficient electrical machines with a high power density. The improvement of electrical machines' slot filling factors is one of the measures to satisfy these requirements. In recent years, this topic has aroused greater interest in the industrial sector, since the evolution of the winding technological manufacturing processes allows an economically sustainable realization of ordered winding arrangements, rather than random ones. Moreover, the manufacture of electrical machines' windings must be preceded by an accurate design phase in which it is possible to evaluate the maximum slot filling factor obtainable for a given wire shape and for its dimensions. For this purpose, this paper presents an algorithmic approach for the evaluation of maximum slot filling factors in electrical machines under an ideal geometric premise. In particular, this algorithm has a greater degree of flexibility with respect to the algorithm approaches found in the literature, since the study has been extended to round, rectangular and hexagonal wire sections. Furthermore, the slot filling factor calculation was carried out both for standard and non-standard slots. The algorithmic approach proposed can be considered as an additional useful tool for the fast design of electrical machine windings. [ABSTRACT FROM AUTHOR]

The paper describes the methodology used for developing an electric load microforecasting module to be integrated in the Energy Management System (EMS) architecture designed and tested within the "Energy Router" (ER) project. This Italian R&D project is aimed at providing non-industrial active customers and prosumers with a monitoring and control device that would enable demand response through optimization of their own distributed energy resources (DERs). The optimal control of resources is organized with a hierarchical control structure and performed in two stages. A cloud-based computation platform provides global control functions based on model predictive control whereas a closed-loop local device manages actual monitoring and control of field components. In this architecture, load forecasts on a small scale (a single residential or tertiary building) are needed as inputs of the predictive control problem. The microforecasting module aimed at providing such inputs was designed to be flexible, adaptive, and able to treat data with low time resolution. The module includes alternative forecasting techniques, such as autoregressive integrated moving average (ARIMA), neural networks, and exponential smoothing, allowing the application of the right forecasting strategy each time. The presented test results are based on a dataset acquired during a monitoring campaign in two pilot systems, installed during the ER Project in public buildings. [ABSTRACT FROM AUTHOR]

The G-7 economies comprise a few of the global, mainly economically developed countries. On the other hand, in conjunction with these high economic development performances, the ecological behaviors in G-7 anions have concurrently provoked to elevate deep apprehensions among the stakeholders. Therefore, the present research aims to empirically investigate the environmental influences of nuclear energy, industrialization, fossil fuel energy, and foreign direct investment (FDI) in the G-7 nations between 1991 and 2018. After checking the cross-sectional dependency, this study employed the first-generation ((full modified ordinary least square (FMOLS), dynamic ordinary least square (DOLS)) and second-generation (Driscoll and Kraay (D-K), feasible generalized least square (FGLS)) approaches for robust and reliable findings. The findings explore that nuclear energy production is ineffective in curbing the figure of ecological footprints in the long-run. Moreover, the industrialization process and fossil fuel energy consumption reduce environmental quality in the G-7 economies. More to the point, the empirical findings recommend that these nations can renovate their industrial production procedures in an eco-friendly behavior they can experience an unsoiled deployment of the energy transition. Similarly, the FDI also degrades environmental eminence in the long-run. This validates the pollution haven hypothesis in the G-7 countries. Based on these results, this study suggests the G-7 nations should reduce the production of nuclear energy levels, the transition from fossil fuels to renewable energy production in the industrial sector, reduce fossil fuel-based foreign investment, and assimilate ecological welfare strategies within their development planning. [ABSTRACT FROM AUTHOR]

Current research assesses the impact of industrialization and the renewable energy sector on greenhouse gas emissions, proxied by CO2 emissions in Europe and Central Asia. We rely on a two-step system GMM estimator on a sample of 48 countries over the period 2000–2018. Empirical results show that industrialization has a positive effect on CO2 emissions: a 10% increase in industry value added as % of GDP leads to an increase of 2.6% in CO2 emissions. In contrast, renewable energy mitigates CO2 emissions. Ten percentage points increase in renewable energy consumption reduces CO2 emissions per capita by 2.2%. The interaction term between renewable energy and industry value added is negative, suggesting that renewable energy consumption compensates for the negative effect of industrialization on environmental quality. Our main results also confirm the U-shaped inverted relationship between GDP per capita and CO2 emissions. Our study has a number of policy implications and avenues for future research. [ABSTRACT FROM AUTHOR]

The analysis of the implementation effect of the supply-side reform (SSR) in the industrial sector of China's provinces and the reasons behind them are of great significance for China to formulate relevant policies in the future. However, this work has not yet been carried out. Industrial development performance is closely related to energy and environmental efficiency (EEE), and the effect of the SSR implementation is directly reflected in EEE. This study fills this gap by analyzing the EEE of 30 provinces in China from 2012 to 2017 using data envelopment analysis and Malmquist index methods. The results show that the positive effect of China's implementation of SSR has emerged. This positive effect is mainly reflected in the implementation of measures such as reducing overcapacity, which has promoted the technological innovation of enterprises. However, the low management level and resource-allocation efficiency hinder the further improvement of the implementation effect of the SSR, which should be paid special attention to in China's future supply-side reform. In addition, we believe that in the context of China's high-quality development and carbon neutrality goals, the SSR should be given more connotations, which are to increase the requirements for strengthening green and low-carbon development. [ABSTRACT FROM AUTHOR]

The period of industrialization and modernization has increased energy demands around the world. As with other countries, the Taiwanese government is trying to increase the proportion of renewable energy, especially solar energy resources. Thus, there are many solar power plants built in Taiwan. One of the most important components of a solar power plant is the solar panel. The solar panel supplier selection process is a complex and multi-faceted decision that can reduce the cost of purchasing equipment and supply this equipment on time. In this research, we propose fuzzy MCDM approach that includes fuzzy analytical hierarchy process model (FAHP) and data envelopment analysis (DEA) for evaluation and selection of solar panel supplier for a photovoltaic system design in Taiwan. The main objective of this work is to design a fuzzy MCDM approach for solar panel supplier selection based on qualitative and quantitative factors. In the first step of this research, FAHP is applied to define the priority of suppliers. The AHP combined with fuzzy logic (FAHP) can be used to rank suppliers; however, the disadvantages of the FAHP model is that input data, expressed in linguistic terms, depends on experience of experts and the number of suppliers is practically limited, because of the number of pairwise comparison matrices. Thus, we applied several DEA models for ranking potential suppliers in the final stages. As the result, decision making unit 1 (DMU 1) is the optimal solar panel supplier for photovoltaic system design in Taiwan. The contribution of this research is a new fuzzy MCDM for supplier selection under fuzzy environment conditions. This paper also lies in the evolution of a new approach that is flexible and practical to the decision maker. It provides a useful guideline for solar panel supplier selection in many countries as well as a guideline for supplier selection in other industries. [ABSTRACT FROM AUTHOR]

The aim of this study is to identify the correlation between the amount of greenhouse gas emissions, added value from agriculture and economic growth in the Visegrad Group countries. Four countries of Central Europe were studied the Czech Republic, Hungary, Poland and Slovakia in 2008–2019. Due to the objectives of the article, it was decided to use the panel model. The temporal scope of the research covers the years 2008–2019, i.e., two economic periods: 2008–2014 (a downward trend, including agriculture), and 2015–2019 (an upward trend). Greenhouse gas emissions are positively correlated with value added from agriculture and economic growth. The increase in the level of these variables stimulates of the amount of greenhouse gas emissions in the countries of the Visegrad Group. The analysis of the eco-efficiency of greenhouse gas emissions in agriculture, in relation to the gross added value produced, shows that the country with the least pollution of this value was Hungary, followed by Slovakia. The Czech Republic was third, and Poland was the last. The results of the research can be treated as a premise for a strategy for the development of agriculture, limiting the negative effects of its industrial development for more sustainable development. [ABSTRACT FROM AUTHOR]

While previous studies have examined China's changing industrial energy consumption at the national level, this study argues that it is more useful, from a policy standpoint, to conduct a regional-level analysis owing to the significant regional disparity in industrialisation in the country. This study focuses particularly on Northeast China, where the implementation of the Northeast Revitalisation Strategy in 2003 has contributed to rapid reindustrialisation, which has a serious implication for industrial energy consumption. We decompose the region's energy consumption changes into activity, structure, and intensity effects. Our results show that the intensity effect is not the only negative factor impacting industrial energy consumption during 2003-2012. The structure effect also has a negative impact on industrial energy consumption between 2005 and 2012. However, the negative impact of the two factors is weakening and not strong enough to counter the positive impact of the activity effect. This result highlights the problem of uncoordinated policy-making in Northeast China. The development strategy, which still depends highly on traditional heavy industries, is in conflict with the national strategy of energy conservation. The two conflicting objectives of industrial revitalization and energy conservation must be reconciled for sustainability in the long term. The study concludes with policy recommendations on how to achieve such reconciliation. [ABSTRACT FROM AUTHOR]

The second task is securing the sustainable development of countries whose well-being is determined by mining, both environmentally and economically, with simultaneous reducing the global impact of mining on the climate. All published articles are devoted to a broad range of innovative mining technologies interfacing subsoils extraction with mining machinery, labour safety, "green mining" and post-mining development, as exemplified in Figure 1. The third issue is the reduction in the natural intensity of mining, which should be embodied post-mining and in green mining. We are talking about the convergence of mining and environmental technologies, as a result of which, land and water-saving, recycling and biodiversity restoration should become an integral part of the mining process, and be included in the "fair" price of mineral resources. [Extracted from the article]

Liquid air energy storage (LAES) is one of the most promising large-scale energy storage technologies for the decarburization of networks. When electricity is needed, the liquid air is utilized to generate electricity through expansion, while the cold energy from liquid air evaporation is stored and recovered in the air liquefaction process. The packed bed filled with rocks/pebbles for cold storage is more suitable for real-world application in the near future compared to the fluids for cold storage. A standalone LAES system with packed bed energy storage is proposed in our previous work. However, the utilization of pressurized air for heat transfer fluid in the cold storage packed bed (CSPB) is confusing, and the effect of the CSPB on the system level should be further discussed. To address these issues, the dynamic performance of the CSPB is analyzed with the physical properties of the selected cold storage materials characterized. The system simulation is conducted in an experiment scale with and without considering the exergy loss of the CSPB for comparison. The simulation results show that the proposed LAES system has an ideal round trip efficiency (RTE) of 39.38–52.91%. With the consideration of exergy destruction of the CSPB, the RTE decreases by 19.91%. Furthermore, increasing the cold storage pressure reasonably is beneficial to the exergy efficiency of the CSPB, whether it is non-supercritical (0.1 MPa–3 MPa) or supercritical (4 MPa–9 MPa) air. These findings will give guidance and prediction to the experiments of the LAES and finally promote the development of the industrial application. [ABSTRACT FROM AUTHOR]

Power-to-X is an upcoming sector-coupling technology that can play a role in the decarbonisation of energy systems. The aim of this study was to widen the current knowledge of strengths, weaknesses, opportunities, and threats (SWOT) of this innovative technology in the Danish context by utilizing the analytic hierarchy process (AHP) to evaluate and compare perception of academic and industrial experts. The results of this analysis indicate that the external factors such as current policy framework are more important than the internal technology related factors. Further, positive factors predominate negative ones, with academic experts indicating strengths as the most important category and practitioners' opportunities. All experts consider the country being a P2X knowledge hub as one of the most important factors, and in the given context of the Danish energy system, wind developments and Danish industrial environment, seizing this opportunity could be the biggest enabler for P2X success. [ABSTRACT FROM AUTHOR]

This research mainly studies the factors influencing the efficiency of energy utilization. Firstly, by calculating M o r a n ' s I and local indicators of spatial association (LISA) of energy efficiency of regions in mainland China, we found that energy efficiency shows obvious spatial autocorrelation and spatial clustering phenomena. Secondly, we established the spatial quantile autoregression (SQAR) model, in which the energy efficiency is the response variable with seven influence factors. The seven factors include industrial structure, resource endowment, level of economic development etc. Based on the provincial panel data (1998–2016) of mainland China (data source: China Statistical Yearbook, Statistical Yearbook of provinces), the findings indicate that level of economic development and industrial structure have a significant role in promoting energy efficient. Resource endowment, government intervention and energy efficiency show a negative correlation. However, the negative effect of government intervention is weakened with the increase of energy efficiency. Lastly, we compare the results of SQAR with that of ordinary spatial autoregression (SAR). The empirical result shows that the SQAR model is superior to SAR model in influencing factors analysis of energy efficiency. [ABSTRACT FROM AUTHOR]

Increasing concentrations of greenhouse gases in the atmosphere are leading to increased production and use of biofuels. The industrial development of biodiesel production and the use of biodiesel in the EU transport sector have been ongoing for almost two decades. Compared to mineral diesel production, the process of producing biodiesel is quite complex and expensive, and the search for new raw materials and advanced technologies is needed to maintain production value and expand the industrial production of biodiesel. The purpose of this article is to review the application possibilities of one of the new technologies—simultaneous extraction of oil from oily feedstock and transesterification (in situ)—and to evaluate the effectiveness of the abovementioned process under various conditions. [ABSTRACT FROM AUTHOR]

China is a large import and export economy in global terms, and the carbon dioxide emissions and carbon leakage arising from trade have great significance for China's foreign trade and its economy. On the basis of trade data for China's 20 industrial sectors, we first built a panel data model to test the effect of trade on carbon dioxide emissions and the presence of carbon leakage for all industrial sectors. Second, we derived a single-region input–output model for open economies based on the industrial sectors' diversity and carbon dioxide emissions, and performed an empirical test. We estimated the net carbon intensity embodied in export, which is 0.237tCO2/ten thousand RMB, to divide all sectors (ACSs) into high-carbon sectors (HCSs) and low-carbon sectors (LCSs). The results show that higher trade openness leads to a reduction in the intensity of CO2 emissions and gross emissions and that there are obvious structural differences in different sectors with different carbon emission intensity. The coefficient of trade openness for LCSs is −0.073 and is statistically significant at the 1% level, so higher trade openness for LCSs leads to a reduction in the CO2 emissions intensity. However, the coefficient for HCSs is 0.117 and is statistically significant at the 10% level, indicating that higher trade openness increases the CO2 emissions' intensity for HCSs. The difference is that higher trade openness in LCSs can help reduce the CO2 emissions' intensity without the problem of carbon leakage and with the existence of the environmental Kuznets curve (EKC), whereas there is no EKC for HCSs and carbon leakage may happen. We introduced dummy variables and found that a "pollution haven" effect exists in HCSs. The test results in HCSs and LCSs are exactly the opposite of each other, which shows that the carbon leakage of ACSs cannot be determined. The message that can be drawn for policy makers is that China does not need to worry about the adverse impact on the environment of trade opening up and should, in fact, increase the opening up of trade, while becoming acclimatized to environmental regulation of a new trade mode and new standards. This will help amplify the favorable impact of trade opening up on the environment and improve China's international reputation. The policies related to trade should encourage structural adjustment between the sectors via the formulation of differential policies and impose a restraint on sectors that have high levels of CO2 emissions embodied in export. [ABSTRACT FROM AUTHOR]