Search

Buildings are responsible for around 30 to 40% of the energy demand and greenhouse gas (GHG) emissions in European countries. Building stock energy models (BSEMs) are an established method to assess the energy demand and environmental impact of building stocks. Spatial analysis of building stock energy demand has so far been limited to cases where detailed, building specific data is available. This paper introduces two approaches of using synthetic building stock energy modelling (SBSEM) to model spatially distributed synthetic building stocks based on aggregate data. The two approaches build on different types of data that are implemented and validated for two separate case studies in Ireland and Austria. The results demonstrate the feasibility of both approaches to accurately reproduce the spatial distribution of the building stocks of the two cases. Furthermore, the results demonstrate that by using a SBSEM approach, a spatial analysis for building stock energy demand can be carried out for cases where no building level data is available and how these results may be used in energy planning. [ABSTRACT FROM AUTHOR]

The European Union is aiming at reaching greenhouse gas (GHG) emission neutrality in 2050. Austria's current greenhouse gas emissions are 80 million t/year. Renewable Energy (REN) contributes 32% to Austria's total energy consumption. To decarbonize energy consumption, a substantial increase in energy generation from renewable energy is required. This increase will add to the seasonality of energy supply and amplifies the seasonality in energy demand. In this paper, the seasonality of energy supply and demand in a Net-Zero Scenario are analyzed for Austria and requirements for hydrogen storage derived. We looked into the potential usage of hydrogen in Austria and the economics of hydrogen generation and technology and market developments to assess the Levelized Cost of Hydrogen (LCOH). Then, we cover the energy consumption in Austria followed by the REN potential. The results show that incremental potential of up to 140 TWh for hydropower, photovoltaic (PV), and wind exists in Austria. Hydropower generation and PV is higher in summer- than in wintertime, while wind energy leads to higher energy generation in wintertime. The largest incremental potential is PV, with agrivoltaic systems significantly increasing the area amenable for PV compared with PV usage only. Battery Electric Vehicles (BEV) and Fuel Cell Vehicles (FCV) use energy more efficiently than Internal Combustion Engine (ICE) cars; however, the use of hydrogen for electricity generation significantly decreases the efficiency due to electricity–hydrogen–electricity conversion. The increase in REN use and the higher demand for energy in Austria in wintertime require seasonal storage of energy. We developed three scenarios, Externally Dependent Scenario (EDS), Balanced Energy Scenario (BES) or Self-Sustained Scenario (SSS), for Austria. The EDS scenario assumes significant REN import to Austria, whereas the SSS scenario relies on REN generation within Austria. The required hydrogen storage would be 10.82 bn m3 for EDS, 13.34 bn m3 for BES, and 18.69 bn m3 for SSS. Gas and oil production in Austria and the presence of aquifers indicates that sufficient storage capacity might be available. Significant technology development is required to be able to implement hydrogen as an energy carrier and to balance seasonal energy demand and supply. [ABSTRACT FROM AUTHOR]

The European Union and the Austrian government have set ambitious plans to expand renewable energy sources and lower carbon dioxide emissions. However, the expansion of volatile renewable energy sources may affect today's energy system. To investigate future challenges in Austria's energy system, a suitable simulation methodology, temporal and spatially resolved generation and consumption data and energy grid depiction, is necessary. In this paper, we introduce a flexible multi-energy simulation framework with optimization capabilities that can be applied to a broad range of use cases. Furthermore, it is shown how a spatially and temporally resolved multi-energy system model can be set up on a national scale. To consider actual infrastructure properties, a detailed energy grid depiction is considered. Three scenarios assess the potential future energy system of Austria, focusing on the power grid, based on the government's renewable energy sources expansion targets in the year 2030. Results show that the overwhelming majority of line overloads accrue in Austria's power distribution grid. Furthermore, the mode of operation of flexible consumer and generation also affects the number of line overloads as well. [ABSTRACT FROM AUTHOR]

Efforts towards climate neutrality in Europe must prioritise manufacturing industries, particularly the energy-intensive industry (EII) subsectors. This work proposes a novel approach to assessing transformation options for EII subsectors. At the center of this approach we position a potential analysis of technologies' impact on subsector decarbonisation—an approach only known so far from the investigation of renewable energy potentials. These so-called technical climate neutrality potentials, supplemented by a set of indicators taking into account energy consumption, capital and operational expenditures, and GHG taxation programs per technology and subsector, enable cross-sector comparisons. The indicators allow the reader to compare the impact on GHG emission mitigation, energy demand, and cost for every considered technology. At the same time, we keep an open mind regarding combinations of technological solutions in the overall energy system. This ensures that the technology pathways with the greatest climate neutrality potential are easily identified. These focal points can subsequently serve in, e.g., narrative-driven scenario analyses to define comprehensive guides for action for policymakers. A case study of Austria for the proposed potential analysis demonstrates that bio-CH4 and electrolysis-derived H2 are the most economical green gases, but GHG certificate costs will be necessary for cost-competitiveness in high-temperature applications. Electrification offers advantages over conventional technologies and CO2-neutral gas alternatives in low-to-mid temperature ranges. Under the given assumptions, including GHG emission certificate costs of 250 EUR/t CO2, alternative technologies in the identified climate neutrality pathways can operate at total annual costs comparable to conventional fossil-based equivalents. [ABSTRACT FROM AUTHOR]

The Russia-Ukraine war of 2022 showed the danger of reliance on autocratic regimes for energy supply. The use of renewables is a viable opportunity to substitute energy imports. Prosumption is one of the essential pillars of the Fourth Energy Package of the EU. After the war, Ukraine will require recovery packages, among other policies, aimed at increased energy prosumption. It will spur energy generation and foster employment, as well as being one of the means to avoid CO2 emissions. Following the example of Austria, the investment grant sizes for households and energy cooperatives in Ukraine were assessed. Potential job growth was estimated using the employment factor method and the size of CO2 emissions reduction. Should investment grants of EUR 50–200/kW for households and energy cooperatives be introduced, up to EUR 359.4 million would be required in 2022–2030. Households and energy cooperatives in Ukraine will still need to invest up to EUR 988 million until 2030. About 11 thousand full-time jobs may appear by 2030. Energy generation by households in 2020–2030 would enable the avoidance of 3.39–5.94 million tons of CO2 emissions. [ABSTRACT FROM AUTHOR]

The Austrian National Energy and Climate Plan (NECP) refers to spatial planning as an important instrument to achieve 2030 targets because the technical potential of renewable energy sources (RES) are closely related to the types of land use. In Austria, land use is regulated by the spatial planning laws of the nine provinces, whereby the municipalities play an important role. It was the objective of the transFORMAT project to understand the scope for action of the municipalities with regard to promoting renewable energy use, and to understand the practical implications for renewable energy projects. To this end, the consolidated versions of spatial planning laws were analyzed and supported by a software tool (transFORMAT-Analyzer) that was developed to facilitate this process and the resulting follow-up activities. Responsible administrative departments were approached for supplementary information when deemed necessary. As a conclusion, the legal instrument (municipal ordinance), called a municipal development plan or concept, represents a long-term plan for the development of the municipality with the obligation or the option for revision under specific conditions. In theory, these revision intervals could be used to better align municipal plans with the NECP. In practice, however, significant barriers exist and opportunities for improvement have been identified, leading to recommendations on how investments in renewable energy systems can be planned more realistically and, thus, more sustainably. [ABSTRACT FROM AUTHOR]