Search

Inductive power transfer (IPT) systems are pivotal in various applications, relying heavily on the accurate estimation of mutual inductance to enable system interoperability discrimination and optimal efficiency tracking control. This paper introduces a novel mutual inductance estimation method for Series-Series IPT (SS-IPT) systems, utilizing time-domain modeling combined with nonlinear least squares. Initially, the time-domain model of SS-IPT systems is developed by deriving its ordinary differential equations (ODEs). Subsequently, the mutual inductance is estimated directly from these ODEs using a nonlinear least-squares approach. This approach necessitates only primary-side information, eliminating the need for communication, supplementary equipment, or frequency scanning. The simplicity and directness of using collected real-time data enhance the practical applicability of our approach. The effectiveness of the proposed method is substantiated through simulations and experimental data. Results demonstrate that the estimation accuracy of our method remains more than 95.0% in simulations and more than 92.5% in experimental data. [ABSTRACT FROM AUTHOR]

Geothermal resources have been recognized as important sources of clean renewable energy. The exploration, development, and utilization of geothermal resources, especially hot dry rock (HDR) resources, are highly important for achieving peak carbon and carbon neutrality. However, there is no comprehensive evaluation method for determining HDR target areas, and the evaluation scale and application disciplines are relatively simplistic. In this paper, we sought to optimize the identification of HDR target areas through a multiscale and multidisciplinary method and formed a set of generalized and demonstrative processes to guide the exploration of HDR resources. Through practical application to the Gonghe Basin and the Zhangzhou Basin, it was found that the comprehensive geothermal conditions of the Gonghe Basin are superior to those of the Zhangzhou Basin, and the geothermal reservoir depth, geothermal reservoir temperature, geothermal gradient, and heat flow are the four most important factors affecting hot dry rock geothermal resources. Using this method, the prioritization of target areas changes from a qualitative study to a quantitative and semiquantitative study, increasing the specificity and reliability of the decision-making process. [ABSTRACT FROM AUTHOR]

The thermal structure of the lithosphere is key to understanding its thickness, properties, evolution, and geothermal resources. Cratons are known for their low heat flow and deep lithospheric roots. However, present-day cratons in East China have geothermal characteristics that are highly complex, with variable heat flow values, diverging from the typical thermal state of cratons. In this study, we conducted a detailed analysis of the geothermal geological background of the cratons in East China, summarizing the thermal state and tectono-thermal processes of different tectonic units, calculating the temperature at various depths, and discussing differences in temperature and thermal reservoirs at different depths. The observed lithospheric thermal thickness within the North Jiangsu Basin and the Bohai Bay Basin is notably reduced in comparison to that of the Jianghan Basin and the Southern North China Basin. The phenomenon of craton destruction during the Late Mesozoic emerges as a pivotal determinant, enhancing the geothermal resource prospects of both the Bohai Bay Basin and the North Jiangsu Basin. Our findings contribute significantly to the augmentation of theoretical frameworks concerning the origins of heat sources in global cratons. Furthermore, they offer invaluable insights for the methodical exploration, evaluation, advancement, and exploitation of geothermal resources. [ABSTRACT FROM AUTHOR]

With the promotion of the dual carbon target, the scale of the wind power grid connection will significantly increase. However, wind power has characteristics such as randomness and volatility, and its grid connection challenges the pressure of system peak shaving, making it increasingly difficult to regulate the power system. To solve the problem of wind power abandonment, the positive and negative peak shaving characteristics of wind power were first analyzed. Based on this, it is proposed that demand response resources and energy storage with adjustable characteristics are used as the new means of wind power consumption. Together with the thermal power units, they participate in the optimization and scheduling of the power grid, forming a coordinated and optimized operation mode of source load storage. With the goal of minimizing system operating costs, a two-stage economic scheduling model was formed for the day-ahead and intra-day periods. Finally, optimization software was used to solve the problem, and the simulation results showed the effectiveness of the proposed economic scheduling model, which can improve the system's new energy consumption and reduce the system's operating costs. [ABSTRACT FROM AUTHOR]

Aiming at the problems of power flow fluctuation and voltage exceeding standard caused by high permeability distributed power supply access, this paper proposes a load state perception early warning method for distribution networks. Firstly, the random behavior characteristics and voltage early warning mechanisms of power supply and load in distribution networks are analyzed, the dynamic model of distribution networks based on complex network theory is established, and the risk index of voltage exceeding limits under the conditions of high permeability distributed power supply access is put forward. Secondly, the random power flow of distribution networks based on the Monte Carlo method is studied by sampling and analyzing the dynamic model of distribution networks. Then, the risk calculation and safety assessment of voltage exceeding limits are carried out on the currently extracted model, and the risk control strategy of distribution network operation is put forward. Finally, an improved IEEE30-node distribution network topology is proposed. Through simulation analysis, it is proven that the load situation awareness early warning method of distribution networks can effectively predict, improve the security of distribution networks, and provide timely early warning information for maintenance personnel. [ABSTRACT FROM AUTHOR]

The high-resolution seismic characterization of gas hydrate reservoirs plays an important role in the detection and exploration of gas hydrate. The conventional AVO (amplitude variation with offset) method is based on a linearized Zoeppritz equation and utilizes only the reflected wave for inversion. This reduces the accuracy and resolution of the inversion properties and results in incorrect reservoir interpretation. We have studied a high-resolution wave-equation-based inversion method for gas hydrate reservoirs. The inversion depends on the scattering integral wave equation that describes a nonlinear relationship between the seismic wavefield and the elastic properties of the subsurface medium. In addition to the reflected wave, it considers more wavefields including the multiple scattering and transmission during inversion to improve the subsurface illumination, so as to enhance the accuracy and resolution of the inversion properties. The results of synthetic data from Pearl River Mouth Basin, South China Sea, demonstrate the validity and advantages of the wave-equation-based inversion method. It can effectively improve the resolution of inversion results compared to the conventional AVO method. In addition, it has good performance in the presence of noise, which makes it a promising method for field data. [ABSTRACT FROM AUTHOR]

In order to mitigate the negative effects of global climate change, the Chinese government has committed to achieving peak carbon emissions by 2030 and carbon neutrality by 2060. Since municipal cities are the bottom administrative level for drawing up development plans, it is necessary and important to conduct decarbonization pathway research on municipal energy systems (MESs). However, there is little research on decarbonization at the municipal level, and the impact of development paths in each forecast scenario is mostly based on expert evaluation and qualitative assessment. Therefore, this study established a complete decarbonization framework for MESs, including general research procedures, models, and a sustainable evaluation method. The models of energy consumption and carbon emission were adapted and improved for MESs. In order to quantitatively evaluate the energy system development for each scenario, we proposed an energy–economy–environment–security (3E–S) evaluation method, in which principal component analysis (PCA) was adopted for multi-criterion decision making. According to the analysis results of the case city in Guangdong, this evaluation method was proved to be an effective way to identify the factors that may influence coordinated development. By adjusting the relevant parameters and factors in the model, the optimal decarbonization pathway can be found to promote sustainable and coordinated development, thus helping government decision makers to quantitatively evaluate planning paths. [ABSTRACT FROM AUTHOR]

For large-scale and sustainable water electrolysis, it is of great significance to develop cheap and efficient electrocatalysts that can replace platinum. Currently, it is difficult for most catalysts to combine high activity and stability. To solve this problem, we use cobalt to regulate the electronic structure of ruthenium to achieve high activity, and use carbon matrix to protect alloy nanoparticles to achieve high stability. Herein, based on the zeolitic imidazolate frameworks (ZIFs), a novel hybrid composed of RuCo alloy nano-particles and N-doped carbon was prepared via a facile pyrolysis-displacement-sintering strategy. Due to the unique porous structure and multi-component synergy, the optimal RuCo500@NC750 material in both acidic and alkaline media exhibited eminent HER catalytic activity. Notably, the 3-RuCo500@NC750 obtained a current density of 10 mA cm−2 at 22 mV and 31 mV in 0.5 M H2SO4 and 1.0 M KOH, respectively, comparable to that of the reference Pt/C catalyst. Furthermore, the Tafel slopes of the catalyst are 52 mV Dec−1 and 47 mV Dec−1, respectively, under acid and alkali conditions, and the catalyst has good stability, indicating that it has broad application prospects in practical electrolytic systems. This work contributes to understanding the role of carbon-supported polymetallic alloy in the electrocatalytic hydrogen evolution process, and provides some inspiration for the development of a high efficiency hydrogen evolution catalyst. [ABSTRACT FROM AUTHOR]

In shale gas hydraulic fracture monitoring or rock acoustic emission experiments, fracture plane identification is always a complex task. Conventional approaches typically use the source locating results derived from the micro-seismic event and then interpret the fracture plane using manual qualitative analysis. Large errors typically occur due to manual operations. On the other hand, the density-based clustering algorithm with spatial constraints is widely used in geographic information science, biological cells science and astronomy. It is an automated algorithm and can achieve good classification results. In this paper, we introduced the above-mentioned clustering algorithm with spatial constraints to fracture identification applications. Moreover, because micro-seismic events are 4D in nature, every micro-seismic event has both time and space information. Hence, we improve the conventional clustering algorithm by incorporating a time constraint. We test the proposed method using rock acoustic emissions data and compare our fracture identification results with CT scan images; the comparison clearly shows the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

This paper presents a topology of PV MVDC converter with wide output voltage range for a series DC system and its control strategy. In the series DC system, the PV MVDC converters are input-independent, and their outputs are series-connected. A high-level system voltage is achieved for power collection and transmission. This series boost system is flexible and very suitable for decentralized renewable energy application. A modular topology is present for the MVDC converter to improve its applicability. A reconfigurable topology and its modulation method are proposed for the module of the converter. By regulating of duty cycle of switches, the module can be reconfigured to step-up or step-down mode. The operating principles and theoretical derivations of the reconfigurable topology are discussed in detail in this paper. Multimode control strategy for the converter is designed to adapt to complex operation conditions in a series DC system. With the proposed topology and control strategy, the series-connected PV MVDC converter achieves wide input and output voltage range to adapt to the operating characteristics of the series DC system; 3 kV/80 kW DC–DC module and 20 kV/500 kW PV MVDC converter are developed and operating stably in practice. The operation results are presented in the paper. [ABSTRACT FROM AUTHOR]

Geothermal energy has been recognized as an important clean renewable energy. Accurate assessment of geothermal resources is an essential foundation for their development and utilization. The North Jiangsu Basin (NJB), located in the Lower Yangtze Craton, is shaped like a wedge block of an ancient plate boundary and large-scale carbonate thermal reservoirs are developed in the deep NJB. Moreover, the NJB exhibits a high heat flow background because of its extensive extension since the Late Mesozoic. In this study, we used the Monte Carlo method to evaluate the geothermal resources of the main reservoir shallower than 10 km in the NJB. Compared with the volumetric method, the Monte Carlo method takes into account the variation mode and uncertainties of the input parameters. The simulation results show that the geothermal resources of the sandstone thermal reservoir in the shallow NJB are very rich, with capacities of (6.6–12) × 1020 J (mean 8.6 × 1020 J), (5.1–16) × 1020 J (mean 9.1 × 1020 J), and (3.2–11) × 1020 J (mean 6.6 × 1020 J) for the Yancheng, Sanduo and Dai'nan sandstone reservoir, respectively. In addition, the capacity of the geothermal resource of the carbonate thermal reservoir in the deep NJB is far greater than the former, reaching (9.9–15) × 1021 J (mean 12 × 1021 J). The results indicate capacities of a range value of (1.2–1.7) × 1021 J (mean 1.4 × 1022 J) for the whole NJB (<10 km). [ABSTRACT FROM AUTHOR]

Most research about Light and elevated Temperature Induced Degradation (LeTID) is focused on multicrystalline silicon (mc-Si). In this work, the degradation kinetics of Czochralski-grown monocrystalline silicon (Cz-Si) induced by light at an elevated temperature were studied in detail. The lifetime evolutions over time during (1) light soaking (LS), (2) dark annealing–light soaking (DA–LS), and (3) DA–LS cycling experiments were analyzed. Ratios of the capture coefficients for the electrons and holes (k-values) were used to characterize the possible defects responsible for degradation. We found that the behavior of degradation and recovery under light soaking with or without a dark annealing treatment was mostly like boron–oxygen (BO)-related degradation but gave k-values from 19 to 25. In the DA–LS cycling experiment, the max degradation amplitudes hardly changed from the second cycle, and the k-values decreased with an increase in the cycling number. We then analyzed the possible reactions in Cz-Si and discuss the relationship between BO defects and LeTID. [ABSTRACT FROM AUTHOR]

Simulation of the seismic wave propagation in natural gas hydrate (NGH) is of great importance. To finely portray the propagation of seismic wave in NGH, attenuation properties of the earth's medium which causes reduced amplitude and dispersion need to be considered. The traditional viscoacoustic wave equations described by integer-order derivatives can only nearly describe the seismic attenuation. Differently, the fractional time derivative seismic wave-equation, which was rigorously derived from the Kjartansson's constant-Q model, could be used to accurately describe the attenuation behavior in realistic media. We propose a new fractional finite-difference method, which is more accurate and faster with the short memory length. Numerical experiments are performed to show the feasibility of the proposed simulation scheme for NGH, which will be useful for next stage of seismic imaging of NGH. [ABSTRACT FROM AUTHOR]

The environment for practical applications of an energy storage system (ESS) in a microgrid system is very harsh, and therefore actual operating conditions become complex and changeable. In addition, the signal of the ESS sampling process contains a great deal of system and measurement noise, the sampled current fluctuates significantly, and also has high frequency. In this case, under such conditions, it is difficult to accurately estimate the state of charge (SOC) of the batteries in the ESS by common estimation methods. Therefore, this study proposes a compound SOC estimation method based on wavelet transform. This algorithm is very suitable for microgrid systems with large current, frequent fluctuating conditions, and high noise interference. The experimental results and engineering data show that the relative error of the method is 0.5%, which is much lower than the extend Kalman filter (EKF) based on wavelet transform. [ABSTRACT FROM AUTHOR]

The knowledge of hydraulic fracture morphology is significant for the analysis of fracture mechanisms. This paper utilizes passive Ultrasonic Travel-time Tomography (UTT) to characterize the hydraulic fracture. We constructed a velocity model based on X-ray computerized tomography (X-CT) images scanned on a real hydraulically fractured shale column. Then, ray-paths and travel times corresponding to the source-receiver configuration were calculated by curved ray-tracing schemes. Lastly, we performed tomographic inversions using total variation regularization (TVR). The simulation results showed that 3D passive UTT based on TVR is an accurate, efficient, and stable method to reconstruct the velocity structures with fractures, even in the case of sparse ray-coverage or high noise level. Meanwhile, we also verified that the passive UTT is a valid alternative to X-CT in depicting the hydraulic fracturing rock via a proper interpretation method. [ABSTRACT FROM AUTHOR]