Search

Increasingly stringent pollutant emission regulations and a customer demand for a high-fuel economy drive the modern automotive industry to hurriedly solve the problem of decarbonization and powertrain efficiency, leading R&D towards alternative powertrain solutions and fuels. Electrification, today, plays the biggest role in the topic, with Mild Hybrid Electrified Vehicles (MHEVs) being the most cost-effective architectures, displaying dominance in smaller markets such as Brazil. One of the biggest challenges for HEVs' development is the complexity of the hybrid control system, knowing when to actuate the electric machine, and the optimum power delivery, plus the gearshift schedule becomes a hard optimization problem that plays a key role in powertrain efficiency and cost savings for the customer. This paper proposes the implementation of a genetic algorithm (GA) as a machine learning-based control strategy to determine the torque split and the gear engaged for each driving condition of an MHEV operation, aiming to optimize fuel consumption. A quasi-static model of the vehicle was developed in Matlab/Simulink version 2022b, the virtual vehicle was then tested following the FTP75 and HWFET driving cycles. Simulation results indicate that the control decisions taken by the GA are qualitatively coherent for all operation conditions, and even quantitatively coherent in some cases, and that the software has the potential to be used as a control strategy outside the simulation environment, in future steps of development. [ABSTRACT FROM AUTHOR]

The transportation sector has the highest energy demand worldwide and bears the primary responsibility for CO2 emissions. Electromobility has emerged as the most feasible way to alleviate this problem. However, its potential depends heavily on the development of renewable energies. Island regions raise additional barriers to electromobility due to their heavy dependence on fossil fuels. This article addresses this challenge by presenting a comprehensive well-to-wheel framework to assess the levels of efficiency and CO2 emissions of electromobility options such as battery and plug-in electric vehicles (BEVs and PHEVs). The results were compared with those for internal combustion engine vehicles (ICEVs). The framework proposed takes account of various factors including the extraction, refining, and transport of oil, different segments of land vehicles, and electricity system operations. The framework is demonstrated with a case study of the Spanish Canary archipelago. The results show that BEVs improve efficiency and CO2 emissions by around 30% compared to ICEVs on islands where the share of renewable energies is higher than 21%. In contrast, limited renewable generation may lead to BEVs polluting up to 15% more than ICEVs. PHEVs should be considered as a suitable alternative if the share of renewable generation is higher than 35%. [ABSTRACT FROM AUTHOR]

Energy management in electrified vehicles is critical and directly impacts the global operating efficiency, durability, driveability, and safety of the vehicle powertrain. Given the multitude of components of these powertrains, the complexity of the proper control is significantly higher than the conventional internal combustion engine vehicle (ICEV). Hence, several control algorithms and numerical methods have been developed and implemented in order to optimize the operation of the hybrid powertrain while complying with the required boundary conditions. In this work, a model-based method is used for predicting the impacts of a set of possible control actions, choosing the one minimizing the associated costs. In particular, the energy management technique used in the present study is the equivalent consumption minimization strategy (ECMS). The novelty of this work consists of taking into account the thermal state of the ICE for optimization. This feature was implemented by means of an extensive experimental campaign at different coolant temperatures of the ICE to calibrate the additional fuel consumption due to operating the engine outside of its optimum temperature. The results showed significant gains in both WLTC and RDE cycles. [ABSTRACT FROM AUTHOR]

Hybrid electric vehicles are promising solutions to the need for cleaner transport. Their ability to drive fully electric also opens the possibility of zero local emission operation by turning off the internal combustion engine. However, prolonged periods with the engine turned off result in a cooldown of the aftertreatment system resulting in increased emissions when the engine is restarted. To remedy this problem, an emission management strategy that, based on pre-heating of the aftertreatment system, aims to reduce the impact of a prolonged engine-off event on NO x emissions is developed. The method works by locating each engine-off event and then handling each event separately using an optimization scheme that combines pre-heating and a causal heuristic emission management strategy. The individual events are linked using an equivalence factor that describes the decided trade-off between fuel and NO x . The equivalence factor can be chosen heuristically or iteratively to give the desired result in terms of NO x reduction and fuel consumption. The strategy is evaluated using simulations of a drayage drive cycle with multiple engine-off events. The results from the simulations show that for engine-off times below 0.5 h the strategy can reduce NO x compared to the baseline strategy while using the same amount of fuel. If the strategy is allowed more fuel, significant reductions in NO x can be seen for engine-off times up to 1.5 h, after which an exponential decay in the effectivity of the strategy is observed. It is also shown that the reduction in NO x is fairly linear in the equivalence factor, which gives the procedure of choosing it a predictable behavior. [ABSTRACT FROM AUTHOR]

The authors compare the energy consumption and CO2 emissions from vehicles using internal combustion engines (ICE), battery electric vehicles (BEV), fuel cell electric vehicles (FCEV), and two types of hybrid vehicles, BEV-ICE hybrid and BEV-FCEV hybrid. This paper considers several scenarios for four countries' electricity production from primary energy sources to estimate total CO2 release. Energy consumption of the vehicle per 100 km, emissions during manufacturing, battery production, and lifecycle of the vehicle are considered in the total amount evaluation of CO2 released. The results show that with current technologies for battery manufacturing, and a significant proportion of national grid electricity delivered by fossil fuels, BEV is the best choice to reduce carbon emissions for shorter driving ranges. In the case of electricity generation mainly by low-carbon sources, FCEV and BEV-FCEV hybrid vehicles end up with lower carbon dioxide emissions. In contrast, with electricity mainly generated from fossil fuels, electric vehicles do not reduce CO2 emissions compared to combustion cars. [ABSTRACT FROM AUTHOR]

Fuel consumption and emissions in parallel hybrid electric vehicles (HEVs) are directly linked to the way the load request to the wheels is managed between the internal combustion engine and the electric motor powered by the battery. A significant reduction in both consumption and emissions can be achieved by optimally controlling the power split on an entire driving mission (full horizon—FH). However, the entire driving path is often not predictable in real applications, hindering the fulfillment of the advantages gained through such an approach. An improvement can be achieved by exploiting more information available onboard, such as those derived from Advanced Driver Assistance Systems (ADAS) and vehicle connectivity (V2X). With this aim, the present work presents the design and verification, in a simulated environment, of an optimized controller for HEVs energy management, based on dynamic programming (DP) and receding horizon (RH) approaches. The control algorithm entails the partial knowledge of the driving mission, and its performance is assessed by evaluating fuel consumption related to a Worldwide harmonized Light vehicles Test Cycle (WLTC) under different control features (i.e., horizon length and update distance). The obtained results show a fuel consumption reduction comparable to that of the FH, with maximum drift from optimal consumption of less than 10%. [ABSTRACT FROM AUTHOR]