Search

Natural and synthetic esters are increasingly being chosen instead of mineral oil for environmental and fire safety reasons. However, their use in power transformers is limited due to insufficiently well-understood ageing processes affecting their properties and the properties of cellulosic materials impregnated with them. The research results presented in many scientific papers prove that the use of esters slows the ageing process of cellulosic materials. This article presents the results of research aimed at answering the question of whether the effect of slowing the ageing process will also occur in the case of insulation with very low initial moisture. The answer to this question will allow us to better understand the role of water in the ageing process of the transformer's insulation system. The thermal ageing process was carried out at a temperature of 150 °C in closed systems. The degree of cellulose polymerisation was taken as a measure of the degree of paper ageing. Great attention was paid to measuring the water content in both paper and electro-insulating liquids at various stages of their ageing. Furthermore, measurements of the properties of electro-insulating liquids were made, which are considered markers of ageing. The test results obtained indicate that in the case of a dry insulation system, corresponding to the initial moisture of the new units, the type of liquid used to impregnate the cellulosic material does not significantly affect its depolymerisation process. However, in the case of paper impregnated with natural esters, a lower dynamic of moisture increase in insulation was observed. [ABSTRACT FROM AUTHOR]

Heat pumps have the potential for several applications across various industrial sectors, showcasing significant promise, especially in sectors such as pulp and paper, food and beverage, chemical, non-metallic minerals, and machinery. Envisioning the near future, there is confidence that heat pumps can achieve temperatures above 200 °C, offering substantial potential for utilization in these sectors. Nevertheless, a crucial aspect for the advancement of high-temperature heat pumps is the selection of the fluid. Fluid selection involves considerations of both thermodynamic efficiency and environmental impact, requiring fluids with zero ODP, negligible GWP, and no PFAS. Moreover, it is essential to consider the risks to human health associated with a specific fluid. Despite extensive research, particularly in the realm of vapour compression heat pumps, choosing the most suitable working fluid for these applications is a complex undertaking. Therefore, this paper conducts a theoretical analysis to evaluate potential fluids with suitable thermodynamic properties for high-temperature heat pumps (HTHPs). The comparative results gleaned from this study provide valuable insights for the comprehensive analysis of fluids, showing promise within temperature ranges dictated by specific applications. The metrics employed in the comparison emphasise the merits of fluids in terms of the overall performance, dimensions, and operating ranges of applicable compressor, heat exchange capacity, transport properties, and safety. One noteworthy finding from the analysis is that maintaining a constant HTHP lift (at 40 K) results in having the highest COP across all fluids when the condensing temperature ranges between 85% and 90% of their respective critical temperatures. According to the results of the analysis, natural fluids, including water and alcohols like ethanol or methanol, emerge as particularly compelling candidates. [ABSTRACT FROM AUTHOR]

Aiming at the demand for subjective evaluation of driveability for fuel cell vehicles, the modeling and evaluation method of driveability for fuel cell vehicles were studied in this paper. Firstly, a real-time model of the fuel cell vehicle powertrain system was established, which included the fuel cell model, power battery model, DC/DC converter model and drive motor model. Secondly, it was integrated with the vehicle dynamics model to form a virtual prototype of a fuel cell vehicle. And a virtual subjective evaluation platform for fuel cell vehicles was built by combining the virtual prototype and high-fidelity driving simulator. Thirdly, a subjective evaluation method of driveability for fuel cell vehicles was proposed, which included the starting performance, acceleration performance, uniform speed performance and tip-in/tip-out performance. Finally, the paper used the platform and method mentioned above to conduct subjective evaluations of the fuel cell vehicles. [ABSTRACT FROM AUTHOR]

This review paper synthesizes the recent advancements in voltage regulation techniques for active distribution networks (ADNs), particularly in contexts with high renewable energy source (RES) penetration, using photovoltaics (PVs) as a highlighted example. It covers a comprehensive analysis of various innovative strategies and optimization algorithms aimed at mitigating voltage fluctuations, optimizing network performance, and integrating smart technologies like smart inverters and energy storage systems (ESSs). The review highlights key developments in decentralized control algorithms, multi-objective optimization techniques, and the integration of advanced technologies such as soft open points (SOPs) to enhance grid stability and efficiency. The paper categorizes these strategies into two main types: analytical methods and computational methods. In conclusion, this review underscores the critical need for advanced analytical and computational methods in the voltage regulation of ADNs with high renewable energy penetration levels, highlighting the potential for significant improvements in grid stability and efficiency. [ABSTRACT FROM AUTHOR]

This paper attempts to elucidate the transformative integration of computational techniques within power systems, underscoring their critical role in enhancing system modeling, control, and the efficient integration of renewable energy. It breaks down the two-sided nature of technological progress, highlighting both gains in operational efficiency and new challenges such as real-time processing, data management, and cybersecurity. Through meticulous analysis of query-based research patterns and mathematical frameworks, this study delves into the balancing act between specificity and breadth in scholarly inquiries while evaluating the impact and evolution of research trends through citation analysis. The convergence of interests and transient research trends is evident, particularly in Artificial Intelligence and optimization. This comprehensive narrative anticipates a sophisticated trajectory for power systems, advocating for continuous innovation and strategic research to foster sustainable, resilient, and intelligent energy networks. [ABSTRACT FROM AUTHOR]

The efficient utilization of low-cost carbon feedstocks, such as municipal solid waste (MSW), in biorefineries has become increasingly important for reducing GHG emissions and meeting the growing demand for renewable energy sources. However, MSW as a feedstock presents several challenges, including high moisture content, compositional variability, particle size and shape, density, and ash content. To address these challenges, the potential of mechanical dewatering and high-moisture pelleting processes for densifying MSW fractions, such as paper, cardboard, thin plastic, and thick plastic, into low-cost carbon feedstocks with improved handling and conversion properties were investigated. The effect of these preprocessing technologies on the critical quality attributes (CQAs) of the resulting pellets, including bulk density, durability, and size uniformity, were evaluated. The results showed that with these preprocessing technologies, the paper and cardboard fractions could be pelleted at moisture contents over 40% (w.b.) while achieving >99% durability and >300 kg/m3, while the high moisture plastic fractions were not suitable for pelleting. The thick plastic fraction processed in a screw press was shown to remove up to 30% of the moisture content in a single pass. These findings suggest that these mechanical preprocessing technologies can improve the physical properties of low-cost municipal solid waste fractions for biofuels production. [ABSTRACT FROM AUTHOR]

To advance carbon neutrality policies, many countries are increasingly integrating Renewable Energy Sources (RESs) into their energy mix. However, for harnessing natural energy in power generation, RESs present challenges in output control, potentially leading to power imbalances. Such imbalances, when coupled with an excessive reliance on unpredictable RES, may necessitate the curtailment of grid-integrated renewable generation, halting production despite available capacity. This paper proposes strategies to mitigate the economic and operational efficiency impacts of increased RESs on the power grid. It focuses on the optimal operation of Battery Energy Storage Systems (BESSs) and Power to Gas (P2G) technology, which flexibly converts surplus electricity into hydrogen. By employing Mixed Integer Linear Programming (MILP) for optimization and Stochastic Programming (SP) for the management of the uncertainty of renewable energy output, this paper evaluates the anticipated benefits of BESS and P2G applications. [ABSTRACT FROM AUTHOR]

High voltage connections will discharge through inductive voltage and combined transformers when they are switched off. In the past, there was a wide margin between the required capabilities and the actual capabilities of these components. Nowadays, however, this aspect is becoming more prominent due to a higher penetration by cable systems into the grid. Currently, none of the relevant international standards contain any definitions or requirements for line discharge, nor test methods which would validate the ability of the transformer to discharge a line of certain capacitance at a certain voltage. This is why the aim of this paper is to provide a foundation for how to specify, assess and verify the capacitive discharge performance of instrument transformers. This paper will present the basic theory, influencing parameters, multiple test sequences and acceptance criteria for cable discharge. It is clear that capacitive discharges present both thermal and mechanical stress to the unit, which is why this paper will detail how to guarantee both aspects. The idea is that this paper serves as a literal blueprint which can then be transferred to the relevant clauses in upcoming international standards. All conclusions within this paper are achieved through calculations and testing on actual 123 kV inductive voltage transformers and combined units. [ABSTRACT FROM AUTHOR]

Hydrothermal carbonization (HTC) of low quality, wet biogenic residues into intermediate bioenergy carriers can potentially contribute to a more flexible and stable renewable energy system and reduce environmental impacts compared to current residue disposal practices. This study quantifies the environmental impacts via life cycle assessment (LCA) of a novel hydrothermal process for the treatment on an industrial scale of application of three wet biogenic residues (paper bio-sludge, olive pomace, and orange peel) into bioenergy carriers, i.e., solid pellets and biogas. A comprehensive attributional cradle-to-gate life cycle assessment (LCA) was conducted; the life cycle impact assessment (LCIA) utilised the ReCiPe impact assessment method. A selection of 10 significant impact categories was prioritised. Reliability of this categorization was also ensured through a sensitivity analysis carried out using Monte Carlo simulation. Climate change, particulate matter formation and terrestrial acidification impact categories showed the highest reliability, while for freshwater ecotoxicity and freshwater eutrophication impact categories in the study suggest the need for more robust data and further investigation. The climate change impact category presents the following values, as kg CO2eq/tresidue: pulp and paper bio-sludge (PPB), 17.9; olive pomace (OP), −1290; orange peel (ORP), −1301. The LCA study compared electricity yields of the hydrothermal treatment process with conventional treatment processes for each of the target residue streams. The environmental performance of the proposed hydrothermal treatment benefits significantly from the combination of intermediate bioenergy carriers (pellets) from the solid fraction with biogas production from the liquid fraction. Avoided emissions due to the heat recovery provide further environmental benefits. The LCIA results show that the carbon footprint of the F-CUBED production system, as kgCO2eq/kWhe, accounts for –4.56, −0.63, and −0.25 for paper bio-sludge, olive pomace and orange peel, respectively. [ABSTRACT FROM AUTHOR]

Internal arc testing is still a controversial topic in the instrument transformer world. The main reason for that is the fact that even a fully successful test guarantees only a certain degree of transformer safety. Furthermore, the test does not cover a plethora of operational fault scenarios and has requirements which are not defined clearly enough. In addition, there are very few data available in the literature on the internal arc performance of alternative, biodegradable dielectric liquids. Some liquids (such as natural and synthetic esters) do inherently come with higher flash and fire points compared to conventional mineral oil, but there is insufficient test experience to corroborate the influence this high fire point has on the actual operation. Specifically, to the authors' knowledge, internal arc tests on instrument transformers were never performed with biodegradable dielectric liquids, making the contributions of this paper a true world premiere. In short, this paper is intended to augment the existing standards, thus providing additional insight into how to test internal arc performance, what to look out for and what level of performance to expect, which is of broad interest to researchers, utility engineers and public alike. [ABSTRACT FROM AUTHOR]