Search

This paper discusses the state of the art in the application of self-healing silicone-based materials for outdoor high-voltage insulation. Both the dynamic behavior of the dimethyl side groups of silicone rubber and the diffusion of a bulk siloxane to maintain low surface energy are respectively reported as intrinsic mechanisms responsible for the self-healing of silicone rubber. Localization, temporality, mobility, and the type of synthesis are the aspects defining the efficiency of the self-healing ability of silicone rubber. In addition, the deterioration of the self-healing ability with filler loaded into silicone rubber insulation housing composites is discussed. Taking the self-healing property into consideration among the other properties of silicone rubber insulators, such as tracking and erosion resistance, can be a useful design practice at the material development stage. Hydrophobicity retention, recovery, and transfer measurements are discussed as useful indicators of the self-healing ability of silicone rubber. Nevertheless, there remains a need to standardize them as design tests at the material development stage. The paper is intended to shed the light on the hydrophobicity recovery, a key material design parameter in the development of silicone rubber outdoor insulating composites, similar to the tracking and erosion resistance.

DC flashover performance of ice-covered composite insulators with a parallel air gap (CI/PAG) is an important technical consideration when such insulators are used to isolate ground wires for the purpose of DC ice-melting. Tests on tension and suspension types of CI/PAG were thus carried out in the artificial climate chamber to investigate their DC icing flashover performance. The influences of parallel air gap, ice thickness, pollution severity and air pressure on DC negative 50% flashover voltage (U50%) of CI/PAG were investigated. Test results show that the parallel air gap affected both the discharge path and U50%. With increasing ice thickness, U50% declined by up to 52%; this effect was more evident when the breakdown occurred in the air gap. The pollution severity affected U50% only when the flashover happened along insulator surface. With a decrease of atmospheric pressure, U50% decreased. U50% and the ratio of air pressure were in a power function relationship with a positive characteristic exponent which was relevant to the discharge path.