Search

State of Charge (SOC) is essential for a smart Battery Management System (BMS). Traditional SOC estimation methods of lithium-ion batteries are usually conducted using battery equivalent circuit models (ECMs) and the impact of current sensor bias on SOC estimation is rarely considered. For this reason, this paper proposes an online SOC estimation based on a simplified electrochemical model (EM) for lithium-ion batteries considering sensor bias. In EM-based SOC estimation structure, the errors from the current sensor bias are addressed by proportional–integral observer. Then, the accuracy of the proposed EM-based SOC estimation is validated under different operating conditions. The results indicate that the proposed method has good performance and high accuracy in SOC estimation for lithium-ion batteries, which facilitates the on-board application in advanced BMS.

In this paper, the concept of smart battery pack is introduced. The smart battery pack is based on wireless feedback from individual battery cells and is capable to be applied to electric vehicle applications. The proposed solution increases the usable capacity and prolongs the life cycle of the batteries by directly integrating the battery management system in the battery pack. The battery cells are connected through half-bridge chopper circuits, which allow either the insertion or the bypass of a single cell depending on the current states of charge. This consequently leads to the balancing of the whole pack during both the typical charging and discharging time of an electric vehicle and enables the fault-tolerant operation of the pack. A wireless feedback for implementing the balancing method is proposed. This solution reduces the need for cabling and simplifies the assembling of the battery pack, making also possible a direct off-board diagnosis. The paper validates the proposed smart battery pack and the wireless feedback through simulations and experimental results by adopting a battery cell emulator.

Energy storage system (ESS) technology is still the logjam for the electric vehicle (EV) industry. Lithium-ion (Li-ion) batteries have attracted considerable attention in the EV industry owing to their high energy density, lifespan, nominal voltage, power density, and cost. In EVs, a smart battery management system (BMS) is one of the essential components; it not only measures the states of battery accurately, but also ensures safe operation and prolongs the battery life. The accurate estimation of the state of charge (SOC) of a Li-ion battery is a very challenging task because the Li-ion battery is a highly time variant, non-linear, and complex electrochemical system. This paper explains the workings of a Li-ion battery, provides the main features of a smart BMS, and comprehensively reviews its SOC estimation methods. These SOC estimation methods have been classified into four main categories depending on their nature. A critical explanation, including their merits, limitations, and their estimation errors from other studies, is provided. Some recommendations depending on the development of technology are suggested to improve the online estimation.

This paper presents the analysis and design of a smart battery management system for Field Programmable Gate Array (FPGA) based portable electronic devices. It is a novel concept of incorporating the functionality of a smart battery management system into the FPGA used by portable electronic devices, which provides the following advantages. (1) It lowers cost since the conventional commercial independent battery management circuit can be eliminated; (2) It offers more flexibility because FPGA based battery management algorithms can be specifically designed for different battery chemistries of different devices and can provide the flexibility of algorithms and functionalities updating as well. Smart battery management system concepts include four aspects: (1) smart charging; (2) battery balancing; (3) smart discharging; and (4) safety operating. One novel charging algorithm, which combines the merits of multistage charging and pulse charging, is proposed to charge a Li-ion battery pack smartly. A Proportional Integral (PI) control method is introduced to achieve the current control of charging circuit with considerable close loop stability. Simulation results from the PSIM 9.0.4 software package and experimental results from the prototype built in the lab are demonstrated to verify the effectiveness of smart charging. The realizations of battery balancing, smart discharging, and safety operating are also briefly described by taking advantage of the proposed FPGA based smart battery management system topology, which verify the feasibility of the proposed FPGA based smart battery management system for portable electronic devices.

Online accurate estimation of remaining useful life (RUL) of lithium-ion batteries is a necessary feature of any smart battery management system (BMS). In this paper, a novel partial discharge data (PDD)-based support vector machine (SVM) model is proposed for RUL prediction. The proposed algorithm extracts the critical features from the voltage and temperature of PDD to train the SVM models. The classification and regression attributes of SVM are utilized to classify and predict accurate RUL. The different ranges of PDD were analyzed to find the optimal range for training the SVM model. The SVM model trained with optimal PDD features classifies the RUL into six different classes for gross estimation, and the support vector regression is used to estimate the accurate value of the last class. The classification and predictive performance of SVM model trained using the full discharge data and PDD are compared for publicly available data. Results show that the SVM classification and regression model trained with PDD features can accurately predict the RUL with low storage pressure on BMS. The PDD-based SVM model can be utilized for online RUL estimation in electric vehicles.