Search

Laminated shales are widely developed in the Dongying Sag and have attracted much attention as an oil reservoir. Macroscopically, these shales generally have multi-scale cyclicity, which is closely related to the development of laminae. Therefore, analyzing the origin of their cyclicity is helpful to understanding the formation mechanism of laminated shales and the vertical heterogeneity of shale reservoirs, which are of great significance for continental shale oil exploration and development. In this study, a gamma ray (GR) logging series, high-resolution elemental geochemical data, high-resolution core scanning photos and grayscale data, and mineralogical data were used to characterize the cyclicity of shale at different scales, and their relationship with different astronomical cycles was discussed. The results show that the Es3L and Es4U shale in the Dongying Sag has cyclicity from the meter-scale to the ten-meter scale and then to the hundred-meter scale, which is mainly manifested by periodic changes in organic matter abundance, mineral composition, element abundance, and grayscale. These cycles of different scales coincide with different astronomical periods. Specifically, the hundred-meter scale cyclicity is mainly controlled by the very long orbital period; the ten-meter scale cyclicity is mainly related to the eccentricity cycle; while the precession period is the main driver of the meter-scale cyclicity. Finally, we propose a simplified model for illustrating the formation of rhythmic organic-rich shale. This study is helpful to understanding the origin of continental organic-rich shale and predicting shale reservoir properties.

Many sets of Paleozoic marine organic-rich shale strata have developed in South China. However, the exploration and development results of these shale formations are quite different. Based on the data of core experiment analysis, drilling, fracturing test of typical wells, the reservoir differences and controlling factors of four sets of typical marine organic-rich shale in southern China are investigated. The four sets of shale have obvious differences in reservoir characteristics. Ordovician–Silurian shale mainly develops siliceous shale, mixed shale and argillaceous shale, with large pore diameter, high porosity, moderate thermal maturity, large pore volume and specific surface area. Cambrian shale mainly develops siliceous shale and mixed shale, with small pore diameter, low porosity, high thermal maturity and smaller pore volume and specific surface area than Ordovician–Silurian shale. Devonian–Carboniferous shale has similar mineral composition to Ordovician–Silurian shale, with small pore diameter, low porosity, moderate thermal maturity and similar pore volume and specific surface area to that of Cambrian shale. Permian shale has very complex mineral composition, with large pore diameter, low to medium thermal maturity and small specific surface area. Mineral composition, thermal maturity and tectonic preservation conditions are the main factors controlling shale reservoir development. Siliceous minerals in Cambrian shale and Ordovician–Silurian shale are mainly of biological origin, which make the support capacity better than Devonian–Carboniferous shale and Permian shale (siliceous minerals are mainly of terrigenous origin and biological origin). Thermal maturity of Ordovician–Silurian shale and Devonian–Carboniferous shale is moderate, with a large number of organic pores developed. Thermal maturity of Cambrian shale and Permian shale is respectively too high and too low, the development of organic pores is significantly weaker than the two sets of shale above. There are obvious differences in tectonic preservation conditions inside and outside the Sichuan Basin. Shale reservoirs inside the Sichuan Basin are characterized by overpressure due to stable tectonic activities, while shale reservoirs outside the Sichuan Basin are generally normal–pressure. Four sets of marine shale in South China all have certain resource potentials, but the exploration and development of shale gas is still constrained by complicated geological conditions, single economic shale formation, high exploration and development costs and other aspects. It is necessary for further research on shale gas accumulation theory, exploration and development technology and related policies to promote the development of China’s shale gas industry.

Coupled inductors can effectively optimize the THD, loss, current ripple, and power density of multiphase interleaved totem-pole PFC converters. However, a coupled inductor will also worsen the zero-crossing distortion process. This paper first introduces the working principle of the interleaved totem-pole PFC converter with a coupled inductor based on a detailed analysis of modes, and then analyzes the influence on the zero-crossing process caused by the coupled inductor. To eliminate the zero-crossing distortion caused by the coupled inductor, an improved control strategy and its digital realization method of the totem-pole PFC converter is presented through the system model. Finally, the validity and correctness of the proposed circuit and control are verified in the 7.7 kW interleaved totem-pole PFC converter.

Organic-rich lacustrine shales are widely developed in China, and they have long been simply regarded as homogeneous source rocks, which restricts the understanding of intrasource oil accumulation. At present, the study of the LXF (Lower Member of the Xingouzui Formation) in the Jianghan Basin as an unconventional oil reservoir is still in its infancy, and the hydrocarbon accumulation mechanism is still unclear. Geochemical and mineralogical studies were carried out on a suite of samples from the 100-m-thick sequence, i.e., LXF II Oil Bed, by using XRD, SEM, MICP, and Rock-Eval pyrolysis. The results show that the II Oil Bed is rich in carbonate and poor in clay, so it shows a good fracturing tendency. The high degree of heterogeneity in mineral composition leads to frequent interbedding of different lithofacies. In the II Oil Bed, intercrystalline pores, interparticle pores, and intraparticle pores are developed, and micro-fractures are often observed. However, the main pore types, pore size distribution, and connectivity are quite different among lithofacies, and the carbonate-rich lithofacies have better reservoir capacity. The OM (organic matter) abundance of the II Oil Bed varies greatly and generally ranges from fair to very good. Coupled with its early-mature to mature Type II OM, it is considered to have the characteristics required for oil generation. Comprehensive analysis shows that the II Oil Bed has good shale oil exploration prospects, and the enrichment of shale oil in the sequence is the result of multiple factors matching. Firstly, high organic matter abundance is the material basis for shale oil enrichment. Secondly, thermal maturity is a prerequisite, and the difference in burial depth leads to the differential enrichment of shale oil in different areas. Thirdly, pores and micro-fractures developed in shale not only provide space for hydrocarbon storage, but also form a flow-path network. Finally, multi-scale intrasource migrations are key processes ranging from the scale of lithofacies to the intervals, which further results in the differential shale oil enrichment in different lithofacies and intervals. Considering the hydrocarbon generation capacity and reservoir quality, the prospective depth for shale oil exploration in the study area is >1350 m. The findings of this study can help in the better-understanding of the shale oil enrichment mechanism, and the optimization of future exploration strategies.

The low-temperature oxidation law of coal and rock mass is the basis to study spontaneous combustion in goafs. In this paper, the low-temperature oxidation laws of coal, oil shale, and mixtures of coal and oil shale were studied by using laboratory programmed heating experiments combined with a field beam tube monitoring system. The results from the programmed heating experiments showed that the heat released from oil shale was less than that from coal. Coal had a lower carbon monoxide (CO)-producing temperature than oil shale, and the mixture showed obvious inhibiting effects on CO production with an average CO concentration of about 38% of that for coal. Index gases were selected in different stages to determine the critical turning point temperature for each stage. The field beam tube monitoring system showed that the temperature field of the 1105 co-mining face of coal and oil shale in the goaf of the Liangjia Coal Mine presented a ladder-like distribution, and CO concentration was the highest for coal and lower for the mixture of coal and oil shale, indicating that the mixture of coal with oil shale had an inhibiting effect on CO production, consistent with the results from the programmed heating experiments.