Search

The purpose of this study is to determine the performances of luffa and greenhouse shading netting (which can be used as alternatives to commercial cellulose pads, that are popular for cooling greenhouses), the contribution of external shading to the evaporative cooling performance, and the energy consumption of the direct evaporative cooler. In this experiment, eight different applications were evaluated: natural ventilation (NV), natural ventilation combined with external shading net (NV + ESN), cellulose pad (CP), cellulose pad combined with external shading net (CP + ESN), luffa pad (LP), luffa pad combined with external shading net (LP + ESN), shading net pad (SNP), and shading net pad combined with external shading net (SNP + ESN). The cooling efficiencies of CP, CP + ESN, LP, LP + ESN, SNP, and SNP + ESN were found to be 37.6%, 45.0%, 38.9%, 41.2%, 24.4%, 29.1%, respectively. Moreover, their cooling capacities were 2.6 kW, 3.0 kW, 2.8 kW, 3.0 kW, 1.7 kW, 2.0 kW, respectively. The system water consumption values were 2.9, 3.1, 2.8, 3.2, 2.4, 2.4 l h−1, respectively. The performance coefficients of the system were determined to be 10.2, 12.1, 11.3, 11.9, 6.6, 7.8. The system’s electricity consumption per unit area was 0.15 kWh m−2. As a result of the study, it was determined that commercially used cellulose pads have advantages over luffa and shading net materials. However, luffa pads can be a good alternative to cellulose pads, considering their local availability, initial cost, cooling efficiency, and capacity.

To study the heat and mass transfer characteristics of an evaporative cooler for cooling high-temperature working fluids, an experimental device of the evaporative cooler was built, and a corresponding test system was constructed. Then, the experimental study was carried out based on an orthogonal experimental design, and the law and extent of the influence of water flow in the tube, the spray water flow rate, the inlet water temperature in the tube, and the air flow rate on the heat dissipation, cooling efficiency, and heat and mass transfer coefficients were obtained. The correlation equations of the heat and mass transfer coefficients were obtained by fitting the orthogonal experimental data, and the validity of the correlation equations was confirmed by the verification experiment.

Over the past decade, the integration of desiccant technology with evaporative cooling methods has proven to be highly effective and efficient in providing comfortable indoor environments. The performance of desiccant-based direct evaporative cooling (DEC) systems is strongly influenced by environmental conditions, and their output behavior varies across multiple climatic zones. It is not easy to assess the system performance in numerous climatic zones as it is a time-consuming process. The current study focuses on determining the feasibility of a solid desiccant integrated with a direct evaporative cooler (SDI-DEC) for three different climatic zones of Pakistan: Lahore (hot and humid), Islamabad (hot and semi-humid) and Karachi (moderate and humid). To serve this purpose, a specially designed controlled climate chamber with an integrated air handling unit (AHU) was installed to create multiple environmental conditions artificially. It could also provide global climatic conditions under temperature and absolute humidity ranges of 10 °C to 50 °C and 10 g/kg to 20 g/kg, respectively. The weather conditions of the selected cities were artificially generated in the climate chamber. Based on different operating conditions, such as inlet air temperature, humidity and regeneration temperature, the performance of the system was estimated using performance indicators like COP, dehumidification effectiveness, solar fraction and supply air conditions. Results showed that the maximum temperature achieved from solar collectors was about 70 °C from collectors with an area of 9.5 m2. Moreover, the observations showed that when the regeneration temperature was increased from 60 °C to 80 °C, the COP of the system decreased about 41% in a moderate and humid climate, 28% in a hot and semi-humid environment and 23% in a hot and humid climate. The results revealed that an SDI-DEC system has the potential to overcome the humidity and cooling loads of the multiple climatic scenarios of Pakistan.

There has been considerable research worldwide on desiccant-based air-conditioning during the past 30 years. The rationale for the push for this new research focus has been twofold: (a) the need to provide an alternative to conventional refrigerative air-conditioning systems which rely heavily on fossil fuels as their energy sources, and (b) the need to provide better thermal comfort in air-conditioned spaces in warm to hot and humid climates. A desiccant air-conditioning system consists of several components to cool and dehumidify the air before it is supplied to a conditioned space. Earlier research work has identified the potential advantages of this technology, which include the following: (1) working fluids that do not impact on the ozone layer, (2) reduced electricity consumption, (3) improved indoor air quality, (4) simpler construction and less maintenance, and (5) integral provision of heating and cooling for cold/temperate climates. On the other hand, the authors of this paper identified the following drawbacks: (1) inevitable heating of air while being dehumidified, (2) the need for desiccant regeneration and low thermal COP paradox, (3) limited options for regeneration heat sources, (4) limited options for reliable cooling, and (5) low electrical coefficient of performance (COP). This paper presents a critical review of the energy and thermal comfort performance of solid-desiccant rotor-based air-conditioning systems, and discusses in detail their potential advantages and drawbacks. This critical review found that the drawbacks of the systems outweigh their identified advantages. The main reason for this is the inevitable heating of air while being dehumidified and counterintuitive addition of moisture to air during the evaporative cooling process. During the past 30 years of research and development efforts, no significant innovations have been discovered to resolve these crucial issues. Unless future research and development is directed to find a breakthrough, this technology will have limited commercial application.

In this study, a novel experimental model was proposed, built, and tested to present an efficient and simple method for cooling protective helmets. The system was based on an evaporative cooling technique in which water is used as a coolant sprayed over a canvas covering the outer helmet’s surface. A solar fan was provided to enhance the evaporation rate. The experimental results were used with the main laws of heat and mass to evaluate evaporation and heat transfer rates. The proposed system was compared by other two cases, the uncovered dry helmet and the wet-covered one without using the fan. The inner and outer surface temperatures reached were characterized by a good level of stability and by being compatible with human comfort conditions. The addition of the wet cover led to a temperature drop in both the outer and inner surfaces of the helmet by about 9 degrees, and the addition of the fan led to an additional drop of about 5 degrees. There were increases in the cooling rate by 63.3% by adding the wet cover and by 131.7% after adding the fan. The system is characterized by free power consumption and simplicity in implementation.

In light of energy and climate targets, free cooling unlocks a major resource-saving potential compared to refrigeration. To fill the knowledge gap in quantifying this saving potential, we aim to specify the physical and technical limits of cooling tower applications and provide comprehensive data on electricity and water consumption. For this purpose, we distinguish six types of package-type cooling towers: dry, closed wet, open wet, and three types of hybrid systems; defining one generalized system for all types enables comparability. Subsequently, we collect data from 6730 system models of 27 manufacturers, using technical information from data sheets and additional material. The analysis reveals, for example, specific ranges of electricity demand from 0.01 to 0.06 kWel/kWth and highlights influencing factors, including type and operating point. Refrigeration systems would consume approximately ten times more electricity per cooling capacity. Furthermore, the evaluation demonstrates the functional limits, for example, the minimum cooling temperatures. Minimum outlet temperatures using evaporative cooling are up to 16 K lower than for dry cooling. The collected data have crucial implications for designing and optimizing cooling systems, including potential analysis of free cooling and efficiency assessment of cooling towers in operation.

Passive cooling for thermal comfort improvement has received extensive attention for its low energy consumption. However, most of the existing passive cooling technologies require a complex system design and supporting equipment, since they cool the ambient air. Herein, we propose a hybrid evaporative and radiative cooling membrane with a hygroscopic hydrogel sandwiched by two layers of a porous polyethylene aerogel (PEA). The hydrogel implements evaporative cooling. Combining the high solar reflection of PEA and the high infrared emissivity of hydrogel, this hybrid membrane also possesses radiative cooling. In addition, the high infrared transmittance and low thermal conductivity of PEA allow direct heat transfer between the hydrogel and human body, instead of the ambient air. Through comparative experiments and theoretical calculations, it is indicated that the net cooling power delivered by the hybrid membrane to the human body is up to 78.45 W m−2, which is much higher than that of conventional radiative cooling materials. Outdoor demonstration shows that emission below the hybrid membrane can achieve an average sub-ambient temperature drop of 6 °C, with a maximum of 14 °C, showing great potential for passive building cooling and human personal cooling.

Preservation of potatoes in a controlled cool environment (i.e., in cold storage) consumes a substantial amount of energy. The specific energy consumption in Indian cold storage has been estimated to be between 9 and 26 kWh/ton/year. In this article, the potential for minimizing the energy consumption in the refrigeration process of cold storage through passive cooling concepts (i.e., roof evaporative cooling and the earth integration of the storage building) was explored. These passive concepts of cooling have shown significant potential for lowering the cooling loads and the energy consumption in different types of buildings. Therefore, a feasibility analysis for a potato storage building, considering the effect of the passive cooling concepts, was conducted for three different climatic conditions (i.e., hot–dry, warm–humid, and composite) in India. The energy saving potentials in the cold storage were assessed by quantifying the thermal energy exchange between the indoor and outdoor environments using the modified admittance method. The effect of heat transfer through the building envelope on total energy consumption was estimated for the building having various sunken volumes (buried depths) without and with roof evaporative cooling. Further, the economic feasibility of adopting passive concepts was assessed in terms of life cycle saving compared to the base case. Results indicate that earth coupling without and with evaporative cooling has substantial potential to reduce the cooling load and can produce significant savings.

Jute is a cheap, eco-friendly, widely available material well-known for its cooling properties. In electric vehicles (EVs), dissipating a huge amount of the heat generated from lithium-ion batteries with an efficient, light, and low-power consumption battery thermal management system (BTMS) is required. In our previous study, jute fibers were proposed and investigated as a novel medium to enhance the cooling efficiency of air-based battery thermal management systems. In this paper, as the first attempt, jute was integrated with a phase change material (PCM) passive cooling system, and the thermal performance of a 50 Ah prismatic battery was studied. Temperature evolution, uniformity, and cooling efficiency were investigated. A comparison between the thermal behavior of the air-based BTMS and PCM-assisted cooling system was performed. The results indicated that adding jute to the BTMS increased the cooling efficiency and especially decreased the temperature development. Furthermore, the temperature difference (ΔT) efficiency was enhanced by 60% when integrating jute with PCM, and temperature uniformity improved by 3% when integrating jute with air-based BTMS. This article compared the integration of jute with active cooling and passive cooling; thus, it shed light on the importance of jute as a novel, eco-friendly, lightweight, cheap, available, and nontoxic material added to two strategies of BTMS. The setup was physically made and experimentally studied for the purpose of BTMS optimization.

The present study reports the development of a deep learning artificial intelligence (AI) model for predicting the thermal performance of evaporative cooling systems, which are widely used for thermal comfort in different applications. The existing, conventional methods for the analysis of evaporation-assisted cooling systems rely on experimental, mathematical, and empirical approaches in order to determine their thermal performance, which limits their applications in diverse and ambient spatiotemporal conditions. The objective of this research was to predict the thermal performance of three evaporation-assisted air-conditioning systems—direct, indirect, and Maisotsenko evaporative cooling systems—by using an AI approach. For this purpose, a deep learning algorithm was developed and lumped hyperparameters were initially chosen. A correlation analysis was performed prior to the development of the AI model in order to identify the input features that could be the most influential for the prediction efficiency. The deep learning algorithm was then optimized to increase the learning rate and predictive accuracy with respect to experimental data by tuning the hyperparameters, such as by manipulating the activation functions, the number of hidden layers, and the neurons in each layer by incorporating optimizers, including Adam and RMsprop. The results confirmed the applicability of the method with an overall value of R2 = 0.987 between the input data and ground-truth data, showing that the most competent model could predict the designated output features (Toutdb, wout, and Eoutair). The suggested method is straightforward and was found to be practical in the evaluation of the thermal performance of deployed air conditioning systems under different conditions. The results supported the hypothesis that the proposed deep learning AI algorithm has the potential to explore the feasibility of the three evaporative cooling systems in dynamic ambient conditions for various agricultural and livestock applications.

Natural ventilation, combined with a passive cooling system, can provide significant energy savings in the refrigeration of indoor spaces. The performance of these systems is highly dependent on outdoor climatic conditions. The objective of this study was to analyse the feasibility of a passive, downdraught, evaporative cooling system driven by solar chimneys in different climatic zones by using an experimentally validated simulation tool. This tool combined a ventilation model and a thermal model of the dwelling in which an empirical model of a direct evaporative system made of plastic mesh was implemented. For experimental validation of the combined model, sensors were installed in the dwelling and calibrated in the laboratory. The combined model was applied to Spanish and European cities with different climates. In the simulation, values of cooling energy per volume of air ranging between 0.53 Wh/m3 and 0.79 Wh/m3 were obtained for Alicante (hot climate with moderate humidity) and Madrid (hot and dry climate), respectively. In these locations, medium and high applicability was obtained, respectively, in comparison with Burgos (cold climate with moderate humidity) and Bilbao (cold and humid climate), which were low. The evaluation of the reference building in each location allowed establishing a classification in terms of performance, comfort and applicability for each climate.

Gas turbine inlet air-cooling (TIAC) is an established technology for augmenting gas turbine output and efficiency, especially in hot regions. TIAC using evaporative cooling is suitable for hot, dry regions; however, the cooling is limited by the ambient wet-bulb temperature. This study investigates two-stage evaporative TIAC under the harsh weather of Riyadh city. The two-stage evaporative TIAC system consists of indirect and direct evaporative stages. In the indirect stage, air is precooled using water cooled in a cooling tower. In the direct stage, adiabatic saturation cools the air. This investigation was conducted for the GE 7001EA gas turbine model. Thermoflex software was used to simulate the GE 7001EA gas turbine using different TIAC systems including evaporative, two-stage evaporative, hybrid absorption refrigeration evaporative and hybrid vapor-compression refrigeration evaporative cooling systems. Comparisons of different performance parameters of gas turbines were conducted. The added annual profit and payback period were estimated for different TIAC systems.

This study provides insights into the feasibility of a desiccant dehumidification-based Maisotsenko cycle evaporative cooling (M-DAC) system for greenhouse air-conditioning application. Conventional cooling techniques include direct evaporative cooling, refrigeration systems, and passive/active ventilation. which are commonly used in Pakistan; however, they are either not feasible due to their energy cost, or they cannot efficiently provide an optimum microclimate depending on the regions, the growing seasons, and the crop being cultivated. The M-DAC system was therefore proposed and evaluated as an alternative solution for air conditioning to achieve optimum levels of vapor pressure deficit (VPD) for greenhouse crop production. The objective of this study was to investigate the thermodynamic performance of the proposed system from the viewpoints of the temperature gradient, relative humidity level, VPD, and dehumidification gradient. Results showed that the standalone desiccant air-conditioning (DAC) system created maximum dehumidification gradient (i.e., 16.8 g/kg) and maximum temperature gradient (i.e., 8.4 °C) at 24.3 g/kg and 38.6 °C ambient air conditions, respectively. The DAC coupled with a heat exchanger (DAC+HX) created a temperature gradient nearly equal to ambient air conditions, which is not in the optimal range for greenhouse growing conditions. Analysis of the M-DAC system showed that a maximum air temperature gradient, i.e., 21.9 °C at 39.2 °C ambient air condition, can be achieved, and is considered optimal for most greenhouse crops. Results were validated with two microclimate models (OptDeg and Cft) by taking into account the optimality of VPD at different growth stages of tomato plants. This study suggests that the M-DAC system is a feasible method to be considered as an efficient solution for greenhouse air-conditioning under the climate conditions of Multan (Pakistan).

The article deals with the study on the efficiency of units for porous ammonium nitrate production. The ways which increase the effective implementation of energy resources are determined by including the ejector recycling module, heat and mass exchangers that utilize principles of regenerative indirect evaporative cooling, and the sub-atmospheric inverse Brayton cycle. Mixed exergy analysis evaluates all flows of the system contour as those of the same value. The target parameter for determining the efficiency of both systems is the ratio of the unit’s productivity to the exergy expenditures to produce the unit mass of the product. As a result, it is found that the mentioned devices and units enable to increase the efficiency of the basic scheme by 87%.

Solar photovoltaic (PV) applications are gaining a great interest worldwide and dominating the renewable energy sector. However, the solar PV panels’ performance is reduced significantly with the increase in their operating temperature, resulting in a substantial loss of energy production and poor economic scenarios. This research contributes to overcoming the PV performance degradation due to the temperature rise. This work involves experimental and theoretical studies on cooling of PV panels using the evaporative cooling (EC) principle. A new EC design to cool the bottom surface of a PV panel was proposed, fabricated, tested, and modeled. A series of experimentation readings under real conditions showed the effectiveness of the method. A steady state heat and mass transfer model was implemented and compared with the experimental data. Fair agreement between the results of the modelling and experimental work was observed. It was found that the temperature of the PV panel can be decreased by 10 °C and the power improvement achieved was 5%. Moreover, the EC helps to stabilize the panels’ temperature fluctuation, which results in a better regulation of electrical power output and reduces the uncertainty associated with solar PV systems.

Pre-cooling of inlet air using evaporative cooling is an effective approach to enhance the performance of air-cooled condensers in air conditioning applications. Ultrasonic mist generators have emerged as a promising alternative to conventional evaporative cooling systems based on cooling pads or spray cooling. This paper presents the developed numerical model of an ultrasonic mist generator for the evaporative pre-cooling of the inlet air of the condenser in air conditioning applications. The model was validated against the experimental data obtained in a wind tunnel experimental facility. A parametric analysis including some physical variables involved in the cooling process was carried out, including the main axial air velocity, the injection air velocity and the water mass flow rate of atomized water. The dimensionless groups water-to-air mass flow and air-to-air mass flow ratios were found to most affect the average evaporative cooling efficiency. A maximum value of 0.654 was found for the studied conditions. The optimization analysis carried out shows that the operational ranges leading to the best overall performance are 5 × 10 − 4 ≤ m ˙ w / m ˙ a T ≤ 0.002 and 0.035 ≤ m ˙ a i / m ˙ a T ≤ 0.05 . Under these conditions, there is a better distribution of the water mist throughout the control section and a more homogeneous and effective evaporative cooling process.

A windcatcher is a wind-driven natural ventilation system that catches the prevailing wind to bring fresh airflow into the building and remove existing stale air. This technology recently regained attention and is increasingly being employed in buildings for passive ventilation and cooling. The combination of windcatchers and evaporative cooling has the potential to reduce the amount of energy required to ventilate and cool a greenhouse in warm and hot climates. This study examined a greenhouse incorporated with a passive downdraught evaporative cooling windcatcher (PDEC-WC) system using Computational Fluid Dynamics (CFD), validated with experimental data. Different hot ambient conditions of temperature (30–45 °C) and relative humidity (15–45%) were considered. The study explored the influence of different spray heights, layouts, cone angles and mass flow rates on indoor temperature and humidity. The average error between measurements and simulated results was 5.4% for the greenhouse model and 4.6% for the evaporative spray model. Based on the results and set conditions, the system was able to reduce the air temperature by up to 13.3 °C and to increase relative humidity by 54%. The study also assessed the influence of neighbouring structures or other greenhouses that influence the flow distribution at the ventilation openings. The study showed that the windcatcher ventilation system provided higher airflow rates as compared to cross-flow ventilation when other structures surrounded the greenhouse.

The present study considers evaporative cooling and desiccant unit-based air-conditioning (AC) options for livestock AC application. In this regard, proposed systems are investigated by means of experiments and thermodynamic investigations. Air-conditioning requirements for animals are theoretically investigated and temperature-humidity index (THI) is estimated. A lab-scale heat mass exchanger based on the Maisotsenko-cycle evaporative cooling conception (MEC) is set up and its performance is evaluated at different ambient air conditions. In addition, a desiccant-based air-conditioning (DAC) unit is thermodynamically evaluated using a steady-state model available in the literature. The study focuses on the ambient conditions of Multan which is the 5th largest city of Pakistan and is assumed to be a typical hot city of southern Punjab. The study proposed three kinds of AC combination i.e., (i) stand-alone MEC, (ii) stand-alone desiccant AC, and (iii) M-cycle based desiccant AC systems. Wet bulb effectiveness of the stand-alone MEC unit resulted in being from 64% to 78% whereas the coefficient of performance for stand-alone desiccant AC and M-cycle based desiccant AC system was found to be 0.51 and 0.62, respectively. Results showed that the stand-alone MEC and M-cycle based desiccant AC systems can achieve the animals’ thermal comfort for the months of March to June and March to September, respectively, whereas, stand-alone desiccant AC is not found to be feasible in any month. In addition, the ambient situations of winter months (October to February) are already within the range of animal thermal comfort.

Irrigated agriculture has the potential to alter regional to global climate significantly. We investigate how irrigation will affect regional climate in the future in an inland irrigation area of northern China, focusing on its effects on heat fluxes and near-surface temperature. Using the Weather Research and Forecasting (WRF) model, we compare simulations among three land cover scenarios: the control scenario (CON), the irrigation scenario (IRR), and the irrigated cropland expansion scenario (ICE). Our results show that the surface energy budgets and temperature are sensitive to changes in the extent and spatial pattern of irrigated land. Conversion to irrigated agriculture at the contemporary scale leads to an increase in annual mean latent heat fluxes of 12.10 W m−2, a decrease in annual mean sensible heat fluxes of 8.85 W m−2, and a decrease in annual mean temperature of 1.3 °C across the study region. Further expansion of irrigated land increases annual mean latent heat fluxes by 18.08 W m−2, decreases annual mean sensible heat fluxes by 12.31 W m−2, and decreases annual mean temperature by 1.7 °C. Our simulated effects of irrigation show that changes in land use management such as irrigation can be an important component of climate change and need to be considered together with greenhouse forcing in climate change assessments.

Evaporative cooling systems using a combination of evaporative pads and extractor fans require greenhouses to be hermetic. The greatest concentration of greenhouses in the world is located in southeast Spain, but these tend not to be hermetic structures and consequently can only rely on fogging systems as evaporative cooling techniques. Evaporative cooling boxes provide an alternative to such systems. Using a low-speed wind tunnel, the present work has compared the performance of this system with four pads of differing geometry and thickness manufactured by two different companies. The results obtained show that the plastic packing in the cooling unit produces a pressure drop of 11.05 Pa at 2 m·s−1, which is between 51.27% and 94.87% lower than that produced by the cellulose pads. This pressure drop was not influenced by increases in the water flow. The evaporative cooling boxes presented greater saturation efficiency at the same flow, namely 82.63%, as opposed to an average figure of 65% for the cellulose pads; and also had a lower specific consumption of water, at around 3.05 L·h−1·m−2·°C−1. Consequently, we conclude that evaporative cooling boxes are a good option for cooling non-hermetic greenhouses such as those most frequently used in the Mediterranean basin.

An increased awareness of the impacts of synthetic refrigerants on the environment has prompted the refrigeration industry and researchers worldwide to seek better alternatives in terms of technical, economic and environmental performance. CO2 refrigerant, also known as R744, has re-emerged as a potential alternative to existing refrigerants with its zero ozone depletion potential (ODP) and impressively low global warming potential (GWP). A refrigeration system utilising this refrigerant, however, suffers performance degradation when it operates in warm or hot climatic regions due to its inevitable operation in the supercritical region. In addition, the CO2 refrigerant properties necessitate the need for components designed to withstand very high operating pressures. These challenges have not been let unnoticed; related industries and researchers are actively involved in research and development of various components and systems which in turn encourages increased applications of these systems. In this paper, a comprehensive review of CO2 refrigeration systems and the state of the art of the technology and its applications in various industries is presented. In particular, the paper reviews recent research and developments on various aspects of CO2 systems including cycle modifications, exergy analysis of the systems, system modelling, transcritical operation consideration and various existing and potential applications.

The shift from fossil fuel to more renewable electricity generation will require the broader implementation of Demand Side Response (DSR) into the grid. Utility processes in industry are suited for this, having a large thermal time constant or buffer, and large electricity consumption. A widespread utility system in industry is an induced draft evaporative cooling tower. Considering the safety aspect, such a process needs to maintain cooling water temperature within predefined safe boundaries. Therefore, in this paper, two modelling methods for the prediction of the basin temperature of an induced draft evaporative cooling tower are proposed. Both a white box and a black box methodology are presented, based on the physical principles of fluid dynamics and adaptive neuro-fuzzy interference system (ANFIS) modelling, respectively. By analysing the accuracy of both models with a focus to cooling tower fan state changes, i.e., DSR purposes, it is shown that the white box model performs best. Fostering the idea of using such a system for DSR purposes, the concept of design for flexibility is also touched upon, discussing the thermal mass. Pre-cooling, where the temperature of the cooling water basin is lowered before a fan switch off period, was simulated with the white box model. It was shown that beneficial pre-cooling (to lower the temperature peak) is limited in time.

The technical and economic attractiveness of a solid desiccant based evaporative cooling system depend on several factors: Configuration of the system components and their individual performance, availability of cheap but reliable regeneration heat source. In the tropical and subtropical regions, the air conditioning systems are expected to address not only the sensible loads but also, and most importantly—the loads due to higher outside humidity levels that can severely affect the thermal comfort of the building occupants. This paper reports on the dehumidification potentials of solid desiccant based evaporative cooling systems with an enthalpy exchanger operating in subtropical and tropical climates. In particular, the study presents the cooling and dehumidification capabilities of the enthalpy exchanger observed through the impact of its sensible and latent effectiveness on the thermal comfort of the conditioned space. The key performance indicators are split into two groups: (1) the thermal comfort of the conditioned space, and (2) the coefficient of performance. It was found that this cooling system with enthalpy exchanger performed better than the one without enthalpy exchanger in terms of dehumidification; however, the impact depends on the climate where the system operates.

The main purpose of this research is to analyze and compare the energy performance of two different novel air conditioning systems; one is a dedicated outdoor air system (DOAS) with a parallel system and the other is a heat-pump-integrated liquid-desiccant and evaporative-cooling-assisted 100% outdoor air system (HPLD-IDECOAS). It was assumed that office buildings served by each system were located in six cities representing four different climatic regions in China. The hourly thermal loads of the office buildings meeting the local building design codes of each selected city were predicted by the TRNSYS 18 software package. The hourly thermal load data were imported into the commercial engineering equation solver (EES) program to estimate the operating energy consumption of each system via detailed energy simulations performed using valid system simulation models. The results show that the HPLD-IDECOAS has higher energy-saving potential than the DOAS with a parallel system in climate regions with high humidity, whereas, in dry regions, the difference in energy consumption between the two systems was not significant.

Dew point cooling (DPC) is a novel indirect evaporative cooling concept capable of delivering air temperatures approaching the dew point. Coupling this technology with CO2 refrigeration is well suited to minimising transcritical operation when the coefficient of performance (COP) is dramatically reduced in hot climates. A substantial experimental program was conducted to characterise this combination by testing a 20 kW CO2 refrigeration system subject to ambient temperatures above 40 °C. It was demonstrated that DPC operation not only avoided transcritical operation during such weather conditions, but also increased the COP by up to 140% compared to the conventional system. The combination of these technologies was successfully mathematically modelled, from which the optimum condenser inlet air temperature was identified for each condenser temperature. Using this optimum condition, it was possible to maximise the COP for a range of conditions applicable to the psychometric chart. An annual case study for Adelaide, Australia was conducted which demonstrated that optimally coupling DPC with CO2 refrigeration can reduce the annual energy consumption and peak demand by 16% and 47%, respectively, compared to a conventional CO2 booster system. Furthermore, the number of hours of transcritical operation was reduced from 3278 to 27.

Air conditioning accounts for up to 50% of energy use in buildings. Increased air-conditioning-system installations not only increase total energy consumption but also raise peak load demand. Desiccant evaporative cooling systems use low-grade thermal energy, such as solar energy and waste heat, instead of electricity to provide thermal comfort. This system can potentially lead to significant energy saving, reduction in carbon emissions, and it has a low dew-point operation and large capacity range. Their light weight, simplicity of design, and close-to-atmospheric operation make them easy to maintain. This paper evaluates the applicability of this technology to the climatic conditions of Brisbane, Queensland, Australia, specifically for the residential sector. Given the subtropical climate of Brisbane, where humidity levels are not excessively high during cooling periods, the numerical study shows that such a system can be a potential alternative to conventional compression-based air-conditioning systems. Nevertheless, the installation of such a system in Brisbane’s climate zone requires careful design, proper selection of components, and a cheap heat source for regeneration. The paper also discusses the economy-cycle options for this system in such a climate and compares its effectiveness to natural ventilation.

Solar desiccant cooling is widely considered as an attractive replacement for conventional vapor compression air conditioning systems because of its environmental friendliness and energy efficiency advantages. The system performance of solar desiccant cooling strongly depends on the input parameters associated with the system components, such as the solar collector, storage tank and backup heater, etc. In order to understand the implications of different design parameters on the system performance, this study has conducted a parametric analysis on the solar collector area, storage tank volume, and backup heater capacity of a solid solar desiccant cooling system for an office building in Brisbane, Australia climate. In addition, a parametric analysis on the outdoor air humidity ratio control set-point which triggers the operation of the desiccant wheel has also been investigated. The simulation results have shown that either increasing the storage tank volume or increasing solar collector area would result in both increased solar fraction (SF) and system coefficient of performance (COP), while at the same time reduce the backup heater energy consumption. However, the storage tank volume is more sensitive to the system performance than the collector area. From the economic aspect, a storage capacity of 30 m3/576 m2 has the lowest life cycle cost (LCC) of $405,954 for the solar subsystem. In addition, 100 kW backup heater capacity is preferable for the satisfaction of the design regeneration heating coil hot water inlet temperature set-point with relatively low backup heater energy consumption. Moreover, an outdoor air humidity ratio control set-point of 0.008 kgWater/kgDryAir is more reasonable, as it could both guarantee the indoor design conditions and achieve low backup heater energy consumption.

Generally, Central Asia is typical for regions with strong solar radiation and various natural cooling sources. The heat gain from the building envelope accounts for a large part of the cooling load there. Thus, the pipe-embedded envelope is receiving attention as a semi-active system of utilizing natural energy for cooling. In this study, the performance of the pipe-embedded envelope used in Urumqi is numerically investigated. The energy saving potential regarding evaporative cooling and a ground-source heat exchanger (GSHE) is evaluated over a complete summer. The results show that the built-in pipes can reduce 80% of the solar heat gain through windows, with an effectiveness of around 60%. External windows rather than internal windows should be insulated because the air cavity is cool. With respect to the pipe-embedded wall, it becomes a radiant cooling panel absorbing the heat from the room, with an effectiveness around 83%. The seasonal cooling energy is decreased by 25%–50% in a typical office with a pipe-embedded envelope. Offices with a large window-to-wall ratio are acceptable because natural cooling is employed. GSHE performs the best among the selected sources. The effectiveness of evaporative cooling is also satisfactory, with an energy saving rate of 27%. Overall, the pipe-embedded system is suitable for climatic regions like Urumqi.

Air high in humidity leads to uncomfortable conditions and promotes the growth of different fungi and bacteria, which may cause health problems. The control of moisture content in the air using traditional air conditioning techniques is not a suitable option due to large consumption of primary energy and hence emission of greenhouse gases. The evaporative cooling technology is a cost effective and eco-friendly alternative but can provide thermal comfort conditions only under low humidity conditions. However, the evaporative cooling method can be used effectively in conjunction with desiccant dehumidifiers for better control of humidity. Such systems can control the temperature and humidity of the air independently and can effectively utilize the low-grade thermal energy resources. In this paper, the theoretical analysis of desiccant based evaporative cooling systems is carried out for five cities in Saudi Arabia (Jeddah, Jazan, Riyadh, Hail, and Dhahran). It has been observed that the coefficient of performance (COP) of the system varies from 0.275 to 0.476 for different locations. The water removal capacity of the desiccant wheel is at its maximum for the climatic conditions of Jazan and at its minimum for Hail. The effect of climatic conditions of five cities on regeneration temperature, air mass flow rate, and potential of solar energy has been evaluated using RET Screen software.