Search

A mixed-polymeric electrokinetic chromatography system has been developed for the simultaneous determination of a contaminant like oversulfated condroitin sulfate (OSCS) and impurities expressed as dermatan (Der) in heparin (Hep) samples. The EKC system consisted of 0.5% w/v polymeric β-CD, 0.4% w/v tetronic(®) 1107 and 400 mM tris-phosphate buffer at pH 3.5. The optimized electrophoretic conditions included the use of an uncoated-silica capillary of 50 cm of total length and 75 μm id, an applied voltage of -7 kV, a temperature of 30°C and 200 nm UV-detection. The highly sensitive method developed showed low values of LOD, 0.07% w/w (0.07 μg/mL) (OSCS) and 0.1% w/w (0.1 μg/mL) (Der), and values of LOQ 0.2% w/w (0.2 μg/mL) (OSCS) and 0.3% w/w (0.3 μg/mL) (Der) with a concentration level of Hep sample as low as 0.1 mg/mL. Additional parameters of validation such as specificity, linearity, accuracy, and robustness were evaluated according to international guidelines. Owing to its simplicity, high sensitivity, and reliability, the proposed method can be an advantageous alternative to the traditional methodologies for the analysis of Hep in raw material and specially in finished products because of the low amounts of Hep sample required.

A new CE system based on the use of polymeric-mixed micelles (cholic acid, SDS and the poloxamine Tetronic® 1107) was developed for the simultaneous determination of nine steroids in human urine. This method allows the baseline separation and quantitation of cortisol, androstenedione, estriol, dehydroepiandrosterone sulfate, testosterone, dehydroepiandrosterone, estrone, progesterone and estradiol in less than 25 min showing to be sensitive enough to detect low concentrations of these steroids in urine samples (5–45 ng/mL). The optimized electrophoretic conditions were performed using a 50 cm×75 μm capillary, 18 kV, 25°C, with 44 mM cholic acid, 10 mM SDS, 0.05% w/v tetronic® 1107, 2.5% v/v methanol, 2.5% v/v tetrahydrofuran in 5 mM borate – 5 mM phosphate buffer (pH=8.0) as a background electrolyte and a dual 210/254 UV-detection. The method can simultaneously determine 0.1–120 μg/mL, which corresponds to 5–6000 ng/mL of steroids in 2 mL urine. The recoveries ranged between 82.4 and 101.5%. Due to its simplicity, speed, accuracy and reliability, the proposed method could be a potential alternative to the traditional methodologies used with clinical purposes. Fil: Flor, Sabrina Andrea. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Departamento de Química Analítica y Fisicoquímica; Argentina Fil: Lucangioli, Silvia Edith. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Departamento de Tecnología Farmacéutica; Argentina Fil: Contin, Mario Daniel. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Departamento de Química Analítica y Fisicoquímica; Argentina Fil: Tripodi, Valeria Paula. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Departamento de Química Analítica y Fisicoquímica; Argentina

A new analytical method for determination of coenzyme Q10 (2,3-dimethoxy-5-methyl-6-decaprenyl-1,4-benzoquinone, CoQ10) in human plasma was developed based on CE using a double tensioactive microemulsion. CoQ10 was quantitatively extracted into 1-propanol/hexane and quantified by MEEKC. The microemulsion was prepared by mixing 1.4% w/w sodium bis(2-ethylhexyl) sulfosuccinate, 4% w/w cholic acid, 1% w/w octane, 8.5% w/w butanol, 0.1% w/w PVA and 85% w/w 10 mM Tris buffer at pH 9.0. The optimized electrophoretic conditions included the use of an uncoated silica capillary of 60 cm total length and 75 mum id, an applied voltage of 20 kV, room temperature and 214 nm ultraviolet detection. Selectivity, linearity, LOD, LOQ, precision and accuracy were evaluated as the parameters of validation. Owing to its simplicity and reliability, the proposed method can be an advantageous alternative to the traditional methodology for the quantitation of CoQ10 in human plasma with good accuracy and precision.

A novel microemulsion based on sodium bis(2-ethylhexyl) sulfosuccinate (AOT) was developed for the simultaneous determination of natural and synthetic estrogens by microemulsion EKC (MEEKC). The microemulsion system consisted of 1.4% w/w AOT, 1.0% w/w octane, 7.0% w/w 1-butanol and 90.6% w/w 20 mM sodium salt of 3-(cyclohexylamino)-2-hydroxy-1-propanesulfonic acid (CAPSO) and 10 mM phosphate buffer at pH 12.5. A baseline resolution in the separation of estrone, 17beta-estradiol, estriol, estradiol 17-hemisuccinate, etinilestradiol, estradiol 3-benzoate, and estradiol 17-valerate was achieved in comparison to the traditional MEEKC system with SDS in less than 15 min. The optimized electrophoretic conditions included the use of an uncoated-silica capillary of 60 cm of total length and 75 microm id, an applied voltage of 25 kV, a temperature of 25 degrees C and 214 UV-detection. Parameters of validation such as specificity, linearity, accuracy, LOD, LOQ and robustness were evaluated according to international guidelines. Due to its simplicity, accuracy, and reliability, the proposed method can be an advantageous alternative to the traditional methodologies for the analysis of natural and synthetic estrogens in different pharmaceutical forms.

A capillary electrophoresis method using CDs for quality control of esomeprazole (ESO) in terms of enantiomeric purity and related substances in raw material and pellets was developed. ESO is the S-enantiomer of omeprazole (OMZ). Several parameters were evaluated, including type and concentration of buffer and CD, concentration of additives and electrolyte pH. Resolution between the enantiomers of OMZ obtained for each parameter tested was calculated and the presence of the main related substance such as OMZ sulfone was carefully monitored. The optimized system consisted of 100 mM Tris-phosphate buffer pH 2.5 with 20 mM 2-hydroxypropyl-β-CD, 1 mM sodium dithionite, temperature at 15°C, voltage at 28 kV, and UV detection at 301 nm. Once optimized, the electrophoretic system was validated according to ICH guidelines. The limits of detection and quantification for R-OMZ were 0.6 μg/mL (0.06% w/w of ESO) and 2.0 μg/mL (0.2% w/w of ESO), respectively. A mean concentration of R-OMZ