Search

Separations of human urine by microemulsion electrokinetic chromatography (MEEKC) and micellar electrokinetic capillary chromatography (MEKC) with respect to resolution, migration times and efficiencies were optimized and compared. The optimised MEEKC and MEKC methods were simple and fast, both of which are excellent characteristics for the complex separations required in clinical and biomedical studies. However, resolution in MEKC was significantly greater than in MEEKC although migration times were 30% faster for the optimised MEEKC method. In addition, a faster analysis method (short-end injection) specifically for routine screening purposes was also investigated. With both MEEKC and MEKC modes, this provided short separations (less than 4 min for urine) with no major compromise in resolution. In conclusion, we found that MEEKC offered no real advantage over MEKC for urine analysis.

A simple but rapid capillary electrophoresis method was developed for the measurement of nitrite and nitrate in human extracellular fluids and other aqueous solutions. The capabilities of the method were demonstrated by the measurement of endogenous nitrite and nitrate in plasma and serum samples from healthy volunteers, and serum and synovial fluid samples from rheumatoid arthritis patients. Furthermore, this method was used to simultaneously measure nicotinamide adenine dinucleotide, reduced (NADH), nicotinamide adenine dinucleotide (NAD+), nitrite, and nitrate, when studying the nitrite reductase activity of xanthine oxidase. The stability of nitrite was also investigated and it was found that when whole blood was spiked with nitrite and then processed, the nitrite was more stable in the plasma than in the serum. Our findings may help to explain the variations in basal nitrite concentrations reported in the literature.

A micellar electrokinetic capillary chromatography (MECC) method when compared to free solution capillary electrophoresis (CZE) was shown to offer improved selectivity and resolution for the separation of UV-absorbing components of human urine. Some of the factors affecting MECC separation e.g. methanol concentration, sodium dodecyl sulphate (SDS) concentration, beta-cyclodextrin (beta-CD) concentration, voltage, pH, temperature and electrolyte additives (urea, beta-CD and Brij 35) were optimised using chemometric techniques. Three-level three-factor (3(3)) factorial designs and simplex optimisation were used to achieve optimised conditions with the goal of obtaining the maximum number of peaks in the shortest possible analysis time. Using a TSP CE2000 instrument with detection from 195-300 nm and fitted with a 75 microns x 44 cm (37 cm effective length) fused silica capillary the final optimum conditions were found to be, an electrolyte consisting of 30 mM sodium tetraborate, pH 10, containing 75 mM SDS and 10 mM beta-CD, 15 degrees C, 20 kV, 4 s hydrodynamic injection of filtered urine. These conditions were capable of separating 70 peaks from a normal human urine pool in less than 12 min. The separation of components in urine using the optimised MECC was simpler, more reproducible, faster and gave better resolution than gradient reversed-phase high performance liquid chromatography.

In this study both native and chemically modified cyclodextrins (CDs) were investigated as buffer additives to improve the micellar electrokinetic capillary chromatography (MEKC) separation of endogenous bioanalytes in human urine. The following CDs were investigated: alpha, beta, gamma-CDs; hydroxypropyl-alpha-CD, hydroxypropyl-beta-CD, methylated beta-CD, sulphated beta-CD, sulphobutyl ether-beta-CD and hydroxypropyl-gamma-CD. The separations were compared to MEKC without additives. The best improvement in peak resolution and separation of urine components was observed with the sulphated beta-CD. A four-factor three-level full factorial design study was conducted on voltage, temperature, pH and sulphated beta-CD molarity. The optimum conditions were 25 mM sodium tetraborate, pH 9.5, 75 mM sodium dodecyl sulphate (SDS) and 6.25 mM sulphated beta-CD and were able to resolve 70 peaks from a urine pool in 12 min. These optimum conditions have been successfully applied to a number of clinical samples.

A novel capillary zone electrophoresis method is described for the determination of taurine in plasma. The method is rapidly executed and is highly selective for taurine as separation is based on the difference in ionisation of this amino acid from that of other amino acids. Following addition of homotaurine as internal standard, plasma proteins were precipitated with acetonitrile and the supernatant was derivatised with fluorescamine in the presence of a borate buffer. Capillary electrophoresis (CE) separations were carried out in reverse polarity mode at 27.5 kV on a Beckman P/ACE MDQ CE instrument, equipped with a diode array detector (DAD) set at 266 nm. The sample tray was cooled to 5 degrees C and separations were carried out at 20 degrees C. The fused-silica capillary was 50.2 cm in length (40.2 cm to detector) with an internal diameter of 75 microm. A capillary conditioning solution was applied daily in order to suppress the residual electroosmotic flow (EOF). The method, which was validated using feline plasma as the blank matrix, was shown to be linear and reproducible over the concentration range 2.5-100 microg/mL. The coefficients of variation (CVs) of replicate analyses were less than 4.5% at 1 microg/mL taurine in feline plasma and less than 3% for 2.5 microg/mL in human plasma. Recovery was estimated at 99.2% with a CV of 4.85%. It has been demonstrated that quantitation in aqueous solution yields similar results to those obtained by interpolation on a plasma calibration curve provided that subtraction for the taurine peak in unspiked plasma is carried out and that a suitable internal standard is employed.