Search

In this paper, multi-band bandstop filters (BSFs) based on mixed electric and magnetic coupling resonators are proposed. These proposed structures include a multimode resonator based on symmetrical open-circuit branches, including upper- and lower-branch filter circuits. Through this design, the center frequencies of the stopbands can be flexibly and autonomously adjusted. In addition, the filters proposed in this paper have excellent characteristics, such as miniature dimensions and abrupt roll-off skirts. Finally, these tri-band to sext-band bandstop filters were fabricated and the measured results agreed well with the simulated ones. The proposed structures can be applied in the fields of communication, information, and coal automation. [ABSTRACT FROM AUTHOR]

Digital twin technology provides a reliable paradigm to address the high trial-and-error costs and limited perception capabilities in satellite networking. However, the dynamic constellation topology and real-time twin applications remain significant challenges in satellite network design. This paper proposes a network topology simulation approach that dynamically analyzes the inter-satellite topology based on pre-calculated ephemeris and orbital information. Furthermore, the paper introduces a digital twin algorithm based on network virtualization, cloud platform management, and software-defined networking to validate and analyze the twin requirements at different stages. Finally, a low Earth orbit (LEO) constellation twin validation environment is constructed to verify the networking protocols at various stages. The experimental results demonstrate the performance of the proposed twin systems at different stages. [ABSTRACT FROM AUTHOR]

Researchers from different fields have studied the effects of the COVID-19 pandemic and published their results in peer-reviewed journals indexed in international databases such as Web of Science (WoS), Scopus, PubMed. Focusing on efficient methods for navigating the extensive literature on COVID-19 pandemic research, our study conducts a content analysis of the top 1000 cited papers in WoS that delve into the subject by using elements of natural language processing (NLP). Knowing that in WoS, a scientific paper is described by the group Paper = {Abstract, Keyword, Title}; we obtained via NLP methods the word dictionaries with their frequencies of use and the word cloud for the 100 most used words, and we investigated if there is a degree of similarity between the titles of the papers and their abstracts, respectively. Using the Python packages NLTK, TextBlob, VADER, we computed sentiment scores for paper titles and abstracts, analyzed the results, and then, using Azure Machine Learning-Sentiment analysis, extended the range of comparison of sentiment scores. Our proposed analysis method can be applied to any research topic or theme from papers, articles, or projects in various fields of specialization to create a minimal dictionary of terms based on frequency of use, with visual representation by word cloud. Complementing the content analysis in our research with sentiment and similarity analysis highlights the different or similar treatment of the topics addressed in the research, as well as the opinions and feelings conveyed by the authors in relation to the researched issue. [ABSTRACT FROM AUTHOR]

The importance of artificial intelligence in the banking industry is reflected in the speed at which financial institutions are adopting and implementing AI solutions to improve their services and adapt to new market demands. The aim of this research is to conduct a bibliometric analysis of the involvement of artificial intelligence in the banking sector to provide a comprehensive overview of the current state of research to guide future directions and support the sustainable development of this rapidly expanding field. Another important objective is to identify research gaps and underexplored areas in the field of artificial intelligence in banking. The methodology used is a bibliometric analysis using VOSviewer, analysing 1089 papers from the Web of Science database. The results of the study provide relevant information for banking professionals but also for policy makers. Thus, the study highlights key areas where banks are using artificial intelligence to gain competitive advantage, thereby guiding practitioners in strategic decision making. Moreover, by identifying emerging trends and patterns in AI adoption, the study helps banking practitioners with foresight, enabling them to anticipate and prepare for future developments in the field. In terms of governmental implications, the study can contribute to the development of more nuanced regulatory frameworks that effectively balance the promotion of AI innovation with the protection of ethical standards and consumer protection. [ABSTRACT FROM AUTHOR]

Paper recommendation systems are important for alleviating academic information overload. Such systems provide personalized recommendations based on implicit feedback from users, supplemented by their subject information, citation networks, etc. However, such recommender systems face problems like data sparsity for positive samples and uncertainty for negative samples. In this paper, we address these two issues and improve upon them from the perspective of metric learning. The algorithm is modeled as a push–pull loss function. For the positive sample pull-out operation, we introduce a context factor, which accelerates the convergence of the objective function through the multiplication rule to alleviate the data sparsity problem. For the negative sample push operation, we adopt an unbiased global negative sample method and use an intermediate matrix caching method to greatly reduce the computational complexity. Experimental results on two real datasets show that our method outperforms other baseline methods in terms of recommendation accuracy and computational efficiency. Moreover, our metric learning method that introduces context improves by more than 5% over the element-wise alternating least squares method. We demonstrate the potential of metric learning in addressing the problem of implicit feedback recommender systems with positive and negative sample imbalances. [ABSTRACT FROM AUTHOR]

This paper aims to structure and semantically describe the information within the industrial chain by constructing an Industry Chain Knowledge Graph (ICKG), enabling more efficient and intelligent information management and analysis. In more detail, this paper constructs a multi-domain industrial chain dataset and proposes a method that combines the top-down establishment of a semantic expression framework with the bottom-up establishment of a data layer to build an ICKG. In the data layer, a deep learning algorithm based on BERT-BiLSTM-CRF is used to extract industry chain entities from relevant literature and reports. The results indicate that the model can effectively identify industry chain entities. These entities and relationships populate a Neo4j graph database, creating a large-scale ICKG for visual display and aiding cross-domain applications. [ABSTRACT FROM AUTHOR]

Recently, the phenomenon of switching back from microservice to monolith has increased in frequency, leading to intense debate in the industry. In this paper, we conduct a multivocal literature review to investigate reasoning and key aspects to pay attention to when switching back and analyze other practitioners' opinions. The results show four cases of switching back from microservice to monolith: Istio control plane, Amazon Prime Video monitoring service, Segment, and InVision. The five main reasons that led to switching back are cost, complexity, scalability, performance, and organization. During the switching back process, six key aspects need to be addressed: (1) stopping the development of more services, (2) consolidating and testing paths, (3) unifying data storage, (4) implementing the message bus principle, (5) giving up diverse techniques, and (6) learning to use modular design principles. As to the practitioners' opinions, they had mixed views about the switching back phenomenon. However, most thought that switching back required consideration of the actual system situation and principles. These results pave the way for further research and guide researchers and companies through the process of switching back from microservice to monolith. [ABSTRACT FROM AUTHOR]

In the dynamic visual cabinet, the occurrence of motion blur when consumers take out commodities will reduce the accuracy of commodity detection. Recently, although Transformer-based video deblurring networks have achieved results compared to Convolutional Neural Networks in some blurring scenarios, they are still challenging for the non-uniform blurring problem that occurs when consumers pick up the commodities, such as the problem of difficult alignment of blurred video frames of small commodities and the problem of underutilizing the effective information between the video frames of commodities. Therefore, an improved Transformer video deblurring network is proposed. Firstly, a multi-scale Transformer feature extraction method is utilized for non-uniform blurring. Secondly, for the problem of difficult alignment of small-item-blurred video frames, a temporal interactive attention mechanism is designed for video frame alignment. Finally, a feature recurrent fusion mechanism is introduced to supplement the effective information of commodity features. The experimental results show that the proposed method has practical significance in improving the accuracy of commodity detection. Moreover, compared with the recent Transformer deblurring algorithm Video Restoration Transformer, the Peak Signal-to-Noise Ratio of this paper's algorithm is higher than that of the Deep Video Deblurring dataset and the Fuzzy Commodity Dataset by 0.23 dB and 0.81 dB, respectively. [ABSTRACT FROM AUTHOR]

Mobile phone backplanes are an important part of mobile phones, and are often affected by a wide range of factors during the manufacturing process, resulting in defects of various scales and similar backgrounds. Therefore, accurately identifying these defects is crucial for improving mobile phone quality. To address this challenge, this paper proposes a multi-scale and dynamic attention fusion UNet (MDAF-UNet) model. The model innovatively combines normal convolution with dilated convolution. This allows the model to capture subtle features of defects and to perceive a larger range of feature variations. Moreover, an improved attention mechanism is introduced in this paper. It fuses channel attention and spatial attention, and dynamically adjusts the feature fusion strategy with learnable weights. This allows the model to increase the attention of important features and improve the effectiveness of feature representation. Experimental results on a publicly available dataset show that the MDAF-UNet model achieves 66.9% Mean Intersection over Union (MIoU), outperforming other state-of-the-art models. This result provides an effective solution to the mobile phone backplane defect segmentation problem. [ABSTRACT FROM AUTHOR]

The video game Factorio is a popular real-time strategy game that hosts a variety of gameplay scenarios analogous to real-world problems such as factory building, pipeline optimization, and conveyor belt logistics. It also considers environmental costs such as pollution and energy consumption. This game focuses on automation and resource management within the context of creating and maintaining factories. Players are challenged to design efficient factories, automate production, control energy consumption, and balance resource utilization, all while defending against environmental challenges such as pollution and hostile enemies. Factorio is a complex software; however, studies have demonstrated its ability to enhance student satisfaction when integrated as an educational module at the university level. This paper aims to utilize the power of Petri Net theory and the practical tool GPenSIM to model and simulate several Factorio pipelines and score them against one another, exploring which pipeline configuration is optimal. The primary objective is to make a mathematical model (Petri Net) to better understand the game's complex mechanisms, identify bottlenecks within the system, and explore opportunities for optimization within the network of modules. The insights gained from this paper may find practical applications in real-world scenarios. [ABSTRACT FROM AUTHOR]

The Internet of Things (IoT) is a rapidly growing network that shares information over the Internet via interconnected devices. In addition, this network has led to new security challenges in recent years. One of the biggest challenges is the impact of denial-of-service (DoS) attacks on the IoT. The Information-Centric Network (ICN) infrastructure is a critical component of the IoT. The ICN has gained recognition as a promising networking solution for the IoT by supporting IoT devices to be able to communicate and exchange data with each other over the Internet. Moreover, the ICN provides easy access and straightforward security to IoT content. However, the integration of IoT devices into the ICN introduces new security challenges, particularly in the form of DoS attacks. These attacks aim to disrupt or disable the normal operation of the ICN, potentially leading to severe consequences for IoT applications. Machine learning (ML) is a powerful technology. This paper proposes a new approach for developing a robust and efficient solution for detecting DoS attacks in ICN-IoT networks using ML technology. ML is a subset of artificial intelligence (AI) that focuses on the development of algorithms. While several ML algorithms have been explored in the literature, including neural networks, decision trees (DTs), clustering algorithms, XGBoost, J48, multilayer perceptron (MLP) with backpropagation (BP), deep neural networks (DNNs), MLP-BP, RBF-PSO, RBF-JAYA, and RBF-TLBO, researchers compare these detection approaches using classification metrics such as accuracy. This classification metric indicates that SVM, RF, and KNN demonstrate superior performance compared to other alternatives. The proposed approach was carried out on the NDN architecture because, based on our findings, it is the most used one and has a high percentage of various types of cyberattacks. The proposed approach can be evaluated using an ndnSIM simulation and a synthetic dataset for detecting DoS attacks in ICN-IoT networks using ML algorithms. [ABSTRACT FROM AUTHOR]

With the development of communication technology, the interference from passive intermodulation to the communication system has become increasingly severe. Locating the source of passive intermodulation and then repairing or replacing the device experiencing passive intermodulation is a reliable method. Therefore, this paper proposes a dual-frequency signal localization method based on the principle of phase ranging to accurately locate the passive intermodulation sources in RF cables. This method switches the test signal frequency to obtain the phase of passive intermodulation signals at different frequencies to localize the passive intermodulation source. This paper analyzes the principle of the passive intermodulation localization method based on dual-frequency signals, establishes a localization system for experiments, and finally, analyzes the experimental error to propose an optimization strategy. Through experimental verification, this method can stabilize the positioning error of a passive intermodulation source in a transmission line less than 0.06 m. Meanwhile, this method has high positioning accuracy and the advantages of slight computational complexity, fast positioning speed, and only a small number of requirements on hardware resources. It can work in communication scenarios like satellite and base stations, providing a new technical solution for localizing passive intermodulation interference sources in 5G and 6G communication systems. [ABSTRACT FROM AUTHOR]

Landscape engineering plays a crucial role in urban construction and the development of ecological civilization in China. It actively designs and modifies natural elements, such as water and mountains, acting as the primary living infrastructure. This field continually receives great recognition and praise. Recent academic research has prioritized the use of extended reality (XR) technology to create a real-time interactive visual environment to tackle the issues presented by the dynamic nature of landscape engineering. This paper utilizes the PRISMA method to filter out 68 research documents related to XR in landscape engineering construction and management for bibliometric analysis. A comprehensive review is conducted on the precise and efficient utilization of XR to solve various issues in the field of landscape engineering. Using Cite Space 6.2.R6 (a visual bibliometric software) to visualize knowledge structures and research topics, the analysis includes temporal and spatial examination, application scenario analysis, and technological hierarchy analysis. The paper summarizes the current challenges that XR still faces in the landscape engineering field and envisions extensible application scenarios for XR, providing a reference roadmap for the implementation of XR in landscape engineering. [ABSTRACT FROM AUTHOR]

Handwriting is a biometric behavioral characteristic with evident individual distinctiveness. With the rise of the deep learning trend and demands for forensic identification, handwriting identification has become one of the focal points of research in the field of pattern recognition. Research in handwriting identification for major global languages has matured. However, in China, there is limited attention in the field of writer identification for minority languages such as Mongolian, making it challenging to resolve criminal cases involving handwriting issues. This paper initiates an initial exploration of Mongolian handwriting identification by constructing a structurally simple convolutional neural network. This convolutional neural network, consisting of 12 convolution operations and designed for Mongolian handwriting identification, is referred to as MWInet-12. In this paper, the model evaluation experiments were conducted using a dataset comprising 156,372 samples contributed by 125 writers from the MOLHW dataset. The dataset was divided into training, validation, and test sets in an 8:1:1 ratio. The final results of the experiments reveal impressive accuracy on the test set, achieving a top-1 accuracy of 89.60% and a top-5 accuracy of 97.53%. Furthermore, through comparative experiments involving Resnet50, Fragnet, GRRNN, VGG16, and VGG19 models, this paper establishes that the proposed model yields the most favorable results for Mongolian handwriting identification. The exploratory research on Mongolian handwriting identification in this paper contributes to increasing awareness of information processing for minority languages. It aids in advancing research on classifying writers of Mongolian historical texts and provides technical support for judicial authentication involving handwriting issues. [ABSTRACT FROM AUTHOR]

In high-mobility scenarios, a user's media experience is severely constrained by the difficulty of network channel prediction, the instability of network quality, and other problems caused by the user's fast movement, frequent base station handovers, the Doppler effect, etc. To this end, this paper proposes a video adaptive transmission architecture based on three-dimensional caching. In the temporal dimension, video data are cached to different base stations, and in the spatial dimension video data are cached to base stations, high-speed trains, and clients, thus constructing a multilevel caching architecture based on spatio-temporal attributes. Then, this paper mathematically models the media stream transmission process and summarizes the optimization problems that need to be solved. To solve the optimization problem, this paper proposes three optimization algorithms, namely, the placement algorithm based on three-dimensional caching, the video content selection algorithm for caching, and the bitrate selection algorithm. Finally, this paper builds a simulation system, which shows that the scheme proposed in this paper is more suitable for high-speed mobile networks, with better and more stable performance. [ABSTRACT FROM AUTHOR]

The employment of blockchain technology in electronic voting (e-voting) systems is attracting significant attention due to its ability to enhance transparency, security, and integrity in digital voting. This study presents an extensive review of the existing research on e-voting systems that rely on blockchain technology. The study investigates a range of key research concerns, including the benefits, challenges, and impacts of such systems, together with technologies and implementations, and an identification of future directions of research in this domain. We use a hybrid review approach, applying systematic literature review principles to select and categorize scientific papers and reviewing the technology used in these in terms of the above key concerns. In the 252 selected papers, aspects such as security, transparency, and decentralization are frequently emphasized as the main benefits. In contrast, although aspects like privacy, verifiability, efficiency, trustworthiness, and auditability receive significant attention, they are not the primary focus. We observed a relative lack of emphasis on aspects such as accessibility, compatibility, availability, and usability in the reviewed literature. These aspects, although acknowledged, are not as thoroughly discussed as the aforementioned key benefits in the proposed solutions for blockchain-based e-voting systems, whereas the considered studies have proposed well-structured solutions for blockchain-based e-voting systems focusing on how blockchain can strengthen security, transparency, and privacy, in particular, the crucial aspect of scalability needs attention. [ABSTRACT FROM AUTHOR]

As a key component of the measurement while drilling technology, the accuracy of attitude calculation is directly related to the efficiency of resource exploration. To reduce the influence of vibration, rotation, and other disturbances on the attitude sensor during drilling, a method based on cross-correlation extraction and the adaptive square-root unscented Kalman filter (ASRUKF) is proposed to solve the attitude of the drilling tool in this paper. Firstly, the error of the signal collected by the attitude sensor is compensated, and the unscented Kalman filter (UKF) is used for filtering. Then, the effective gravitational acceleration signal is extracted by the cross-correlation method. Finally, an experimental platform for simulating the fully rotating attitude measurement system is established, and the application effects of the UKF and ASRUKF in the attitude calculation are compared. Compared with the UKF, the root mean square error of the inclination angle calculated by the ASRUKF is reduced by 12.9%, and the variance is reduced by 27.3%; the root mean square error of the azimuth angle is reduced by 29.5%, and the variance is reduced by 39.9%. The experimental results show that the attitude calculation method proposed in this paper can stably and effectively improve the accuracy of the attitude calculation of drilling tools. [ABSTRACT FROM AUTHOR]

The limits of chip technology are constantly being pushed with the continuous development of integrated circuit manufacturing processes and equipment. Currently, chips contain several billion, and even tens of billions, of transistors, making chip testing increasingly challenging. The verification of very large-scale integrated circuits (VLSI) requires testing on specialized automatic test equipment (ATE), but their cost and size significantly limit their applicability. The current FPGA-based ATE is limited in its scalability and support for few test channels and short test vector lengths. As a result, it is only suitable for testing specific chips in small-scale circuits and cannot be used to test VLSI. This paper proposes a low-cost hardware and software solution for testing digital integrated circuits based on design for testability (DFT) on chips, which enables the functional and performance test of the chip. The solution proposed can effectively use the resources within the FPGA to provide additional test channels. Furthermore, the round-robin data transmission mode can also support test vectors of any length and it can satisfy different types of chip test projects through the dynamic configuration of each test channel. The experiment successfully tested a digital signal processor (DSP) chip with 72 scan test pins (theoretically supporting 160 test pins). Compared to our previous work, the work in this paper increases the number of test channels by four times while reducing resource utilization per channel by 37.5%, demonstrating good scalability and versatility. [ABSTRACT FROM AUTHOR]

When the electromagnetic transient simulation of a large-scale power grid is carried out, because the simulation is limited by the scale of simulation software, it is necessary to divide the grid into internal and external grids, and the external grid is modeled with equivalent simplification. Aiming at resolving the difficulties of the traditional grid equivalence method, such as a cumbersome calculation process and harsh calculation conditions, a static grid equivalence method based on the genetic algorithm is proposed in this paper. The method first constructs an external grid equivalence network, which includes coupling branches between boundary nodes, and each boundary node is connected to the external grid equivalence power supply through the branches. Then, the external grid equivalence model is used to establish an optimization model for solving the equivalence network parameters based on the information of the internal network, the difference of the power input from the external grid to the boundary nodes before and after equivalence is used as the objective function, and the genetic algorithm is used to realize the iterative optimization of the objective function to obtain a set of optimal post-equivalence network model parameters so that the state variables of the internal power grid before and after the equivalence are matched. The accuracy and effectiveness of the proposed method are verified through simulation with the CERPI36V7 node system. [ABSTRACT FROM AUTHOR]

Connected Autonomous Vehicle (CAV) dedicated lanes can spatially eliminate the disturbance from Human-Driven Vehicles (HDVs) and increase the probability of vehicle cooperative platooning, thereby enhancing road capacity. However, when the penetration rate of CAVs is low, CAV dedicated lanes may lead to a waste of road resources. This paper proposes a cooperative lane-changing control method for multiple vehicles considering Dynamic Intelligent Connected (DIC) dedicated lanes. Initially, inspired by the study of dedicated bus lanes, the paper elucidates the traffic regulations for DIC dedicated lanes, and two decision-making approaches are presented based on the type of lane-change vehicle and the target lane: CAV autonomous cooperative lane change and HDV mandatory cooperative lane change. Subsequently, considering constraints such as acceleration, speed, and safe headway, cooperative lane-change control models are proposed with the goal of minimizing the weighted sum of vehicle acceleration and lane-change duration. The proposed model is solved by the TOPSIS multi-objective optimization algorithm. Finally, the effectiveness and advancement of the proposed cooperative lane-changing method are validated through simulation using the SUMO software (Version 1.19.0). Simulation results demonstrate that compared to traditional lane-changing models, the autonomous cooperative lane-changing model for CAVs significantly improves the success rate of lane changing, reduces lane-changing time, and causes less speed disturbance to surrounding vehicles. The mandatory cooperative lane-changing model for HDVs results in shorter travel times and higher lane-changing success rates, especially under high traffic demand. The methods presented in this paper can notably enhance the lane-changing success rate and traffic efficiency while ensuring lane-changing safety. [ABSTRACT FROM AUTHOR]