Search

Abstract Carbon Xerogel electrodes' materials were prepared by polycondensation of resorcinol and formaldehyde. They show accommodation of anions in preference to cations by their porous structure. In addition, their selectivity toward anion electroadsorption was found to be pH dependent, with an increase in electrodes' capacitance in acidic solutions. This dependence of the capacitance on the pH of the solution is explained by the presence of functional carboxylic surface groups in the Xerogel carbon micropores, determined by Boehm titration to be 3.26 meq/g. These functional surface groups give rise to the Donnan exclusion effect, whereby they cause partial repulsion of anions from the microporous structure. When the pH of the electrolyte solution is acidic (<2), most of these acidic functional surface groups are in their non-ionized state, and hence anions can freely penetrate the Xerogel carbon microporous structure. The pH dependent capacitance of these carbons was utilized to examine the feasibility of energy extraction from mixing of saline and acidic solutions following the four basic steps of capacitive mixing processes – charge, solution exchange, discharge, and another solution exchange. As opposed to what we expected, a potential rise was observed when the solution was exchanged from acidic to saline, rather than during the other exchange, from saline to acidic solution. It appears that upon exchange of the solutions from saline to acidic, the expected potential rise resulting from the change in the electrodes capacitance, is cancelled by the new quinone-hydroquinone equilibrium that is established on the electrodes by their surface groups. The ability of these surface redox functional groups to store charge provides a basis for energy extraction from the neutralization of acidic solutions, as described herein. [ABSTRACT FROM AUTHOR]

Abstract In this work, we report the use of pseudocapacitive RuO 2 in a porous carbon-based substrate as a composite electrode for high-performance capacitive deionization (CDI). RuO 2 was electrodeposited onto inexpensive activated carbon (AC) via cyclic voltammetry to optimize the composite electrode (denoted as RuO 2 (20)-AC) fabrication. The electrochemical measurements indicate that the composite electrode with a specific surface area of 576 m2/g and hydrophilicity yields an improved specific capacitance and good cycling stability. The notably enhanced performance is attributed to the presence of RuO 2 , which allows rapid Faradaic charge-transfer reactions as well as pseudocapacitive charge storage. These results confirm that incorporating RuO 2 onto an AC electrode effectively reduces the electrical resistance and enhances the charge efficiency. Furthermore, batch-mode CDI experiments were conducted at 1.2 V in a 5 mM NaCl solution. As evidenced, the RuO 2 (20)-AC composite has a promising salt adsorption capacity of 11.26 mg/g, which is 3.7-fold higher than that of pristine AC. Therefore, using the RuO 2 (20)-AC composite as the cathode, an enhanced desalination performance can be achieved through a mixed capacitive-Faradaic process, resulting from two removal mechanisms of capacitive electrosorption and pseudocapacitive redox reactions. This work provides an efficient strategy to utilize RuO 2 on porous carbon-based substrates to improve CDI performance. Highlights • RuO 2 /activated carbon composite electrodes were prepared for CDI. • Electrodeposited RuO 2 showed good pseudocapacitive charge storage. • The metallic conductivity of RuO 2 ensures rapid ion transport. • The composite had a superior salt electrosorption capacity. • The combination of capacitive electrosorption and Faradaic reactions enhanced the CDI performance. [ABSTRACT FROM AUTHOR]

Capacitive deionization (CDI) is an emerging technology as a sustainable low energy process for desalination of brackish water. Activated carbon electrodes are often used in the CDI devices. Electrosorption capacity was found to be improved on asymmetric electrode configuration using activated carbon cloth doped with fluorine due to redistribution of electric potential. This led to improvement in desalination performance up to 12.4 mg/g for a desalination cycle of 6 min employing an asymmetric fluorinated electrode as cathode (ACC//F-ACC). A relatively high charge efficiency of 77 % was obtained representing 92 % charge efficiency neglecting the leakage currents. Furthermore, the ion adsorption rate was found to improve substantially due to an increased surface conductivity of the fluorinated electrode confirmed by Mott-Schottky analysis. Energy consumption during desalination of 1000 ppm sodium chloride solution of 0.71kWh/m3 for symmetric electrode configuration was found to reduce by 36 % upon employing asymmetric configuration. This study shows some of the benefits of asymmetric configuration to achieve an optimal operation of CDI device, as well as improvements related to energy consumption. Image, graphical abstract [ABSTRACT FROM AUTHOR]

CoMoO 4 with oxygen vacancy (CoMoO 4-x) porous nanosheet is prepared by hydrothermal synthesis and hydrogenation reduction method. The CoMoO 4-x porous nanosheet has a higher specific surface area together with a more diverse pore size distribution than CoMoO 4 nanosheet. The density functional theory calculation result exhibits that CoMoO 4-x has lower energy band gap (0.041 eV) than CoMoO 4 (1.683 eV). The electronic density of states plots reveals that CoMoO 4-x has more electron state distribution at Fermi energy level than CoMoO 4. CoMoO 4-x porous sheet achieves higher specific capacitance (1989 g−1) than CoMoO 4 (917 F g−1) at 2 mA cm−2. It also achieves superior capacitance retention rate (91.3%) than CoMoO 4 (83.9%) with the current density increasing from 2 to 20 mA cm−2. The introduction of oxygen vacancy can increase the carrier density, accelerate the electron transfer, promote the electrical conductivity, and accordingly strengthen the redox reactivity of CoMoO 4-x. An asymmetric supercapacitor is also constructed by using CoMoO 4-x as positive electrode and activated carbon as negative electrode. It achieves high energy density of 62.3 W h kg−1 at a power density of 800 W kg−1, together with a good cyclic life. Both experimental measurement and theorical calculation are applied to prove the promotive role of oxygen vacancy in supercapacitive performance of CoMoO 4-x. [ABSTRACT FROM AUTHOR]