Search

Capacitive deionization (CDI) is an emerging technology that supplies deionized water to resolve the fresh water shortage. CDI electrodes are mainly made up of carbon materials, of which the deionization performance is closely related to their physical properties and structures. Hence, a rational design of electrode material structure is essentially significant. Functionalized graphene (fG) in particular has recently been regarded as characteristic CDI electrode material. However, preparation of fG based on graphene oxide usually results in serious secondary pollution due to usage of highly poisonous chemicals, and thus still cannot meet the demand of practical application. It is feasible that environmentally-friendly activated carbon (AC) and small amounts of fGs can be combined rationally, and used as CDI electrodes. Here, sono-assembled AC/m-phenylenediamine (mPEA) or p-phenylenediaminefG inter-connected network architecture has been constructed for the first time successfully. The specific capacitances of the AC/fG composites were found to be significantly higher than that of the AC electrode owing to mesoporous generation. Also, among all the samples, the AC composite with 5 wt % mPEA-fG exhibited an ultrahigh electrosorption capacity of 12.58 mg/g (or 0.22 mmol/g) in NaCl solution. These observations indicate that fG can serve as an efficient conductive bridge to decrease the aggregation of AC particles, and improve the electron transfer with the composite electrode. This work provides an effective strategy for the environmental and economical electrode architectures for general applications in CDI and energy storage. [ABSTRACT FROM AUTHOR]

Abstract: An oxygen plasma treatment was employed to modify the surface of carbon electrodes used in capacitive deionization (CDI). X-ray photoelectron spectroscopy analysis of samples showed that oxygen plasma is mainly attaching oxygenated groups on the PTFE binder used in these electrodes. By functionalizing the binder it can increase the hydrophilicity of the electrode surface and increase the available specific surface area. 2.5min of plasma treatment resulted in the largest improvement of CDI performance of electrodes. Thermodynamic study of CDI performance showed that the modified electrodes followed Langmuir and Freundlich isotherms resulting from the increased interaction between the enhanced electrodes and water. The kinetic study showed that the CDI process followed a pseudo-first order adsorption kinetics. The calculated adsorption rate constants suggested that plasma modification can accelerate ion adsorption of electrodes. [Copyright &y& Elsevier]

Capacitive deionization (CDI) is an emerging technology as a sustainable low energy process for desalination of brackish water. Activated carbon electrodes are often used in the CDI devices. Electrosorption capacity was found to be improved on asymmetric electrode configuration using activated carbon cloth doped with fluorine due to redistribution of electric potential. This led to improvement in desalination performance up to 12.4 mg/g for a desalination cycle of 6 min employing an asymmetric fluorinated electrode as cathode (ACC//F-ACC). A relatively high charge efficiency of 77 % was obtained representing 92 % charge efficiency neglecting the leakage currents. Furthermore, the ion adsorption rate was found to improve substantially due to an increased surface conductivity of the fluorinated electrode confirmed by Mott-Schottky analysis. Energy consumption during desalination of 1000 ppm sodium chloride solution of 0.71kWh/m3 for symmetric electrode configuration was found to reduce by 36 % upon employing asymmetric configuration. This study shows some of the benefits of asymmetric configuration to achieve an optimal operation of CDI device, as well as improvements related to energy consumption. Image, graphical abstract [ABSTRACT FROM AUTHOR]