Search

A disposable electrochemical paper‐based analytical device was constructed based on use of sequential analysis with multiplexed working electrodes and applied for the determination of glucose, creatinine, and uric acid. The device was constructed with 16 microfluidic channels, with 16 working electrodes arranged in four set with four components surrounding the sample injection hole. In addition, a commercial multiplexing module was used, which allowed for multiplexing of the 16 working electrodes. This design allowed for radial and homogeneous sample elution to each sensing spot for high throughput analysis. In the multiplexed determinations, distinct electrochemical procedures were employed for each analyte. Furthermore, each working electrode spot was modified to increase the respective analytical signals. For glucose detection, the sensor was based on electron mediation by ferrocenecarboxylic acid over the modified surface with glucose oxidase. The principle for creatinine detection was based on electrochemical reduction of non‐complexed Fe3+ in excess after complex formation between Fe3+ and creatinine in the chemical step. The anodic peak current responses for uric acid detection increased due to working electrode surface modification with carbon black nanoparticles. In the multiplexed analysis, the device provided limits of detection of 0.120 mmol L−1, 0.084 mmol L−1, and 0.012 mmol L−1 for glucose, creatinine, and uric acid, respectively. The developed device was successfully applied in the analyses of real urine samples. [ABSTRACT FROM AUTHOR]

For the construction of the sensor, three different carbon black (CB) materials (VULCAN XC72R, BLACK PEARLS 4750 and CB N220) were explored as modifying nanomaterial. Firstly, the electrochemical activity of the each SPE modified was compared by cyclic voltammetry and electrochemical impedance spectroscopy technique, using [Fe(CN)6]3−/4− as redox couple. After demonstrating that electrodes modified with different types of CB were characterized by improved electrochemical performances when compared with bare electrodes, and among them, electrodes modified with CB BP4750 is characterised by slightly better electrochemical properties, this type of electrode was used for the development of the analytical method. By applying SWV technique in 0.2 mol L−1 phosphate buffer (pH 3.0), the obtained analytical curves for ACP and LVF were found linearly from 4.0 to 80.0 μmol L−1 and from 0.90 to 70.0 μmol L−1 with limit of detection of 2.6 μmol L−1 and 0.42 μmol L−1 for ACP and LVF, respectively. Finally, the quantification of these drugs in river water was evaluated using the new here‐proposed sensor by recovery method in spiked samples, obtaining satisfactory recovery values. The results achieved demonstrated that the developed analytical tool is of great analytical interest being easy to use, cost‐effective, miniaturized, and thus suitable for low cost on site analysis. [ABSTRACT FROM AUTHOR]

Abstract: Detection of traces from pharmaceutical drugs such as antibiotics in drinking water and foodstuff is essential for guaranteeing human health in some environments, and this has to be done with low cost technologies to be widely deployed in public services and industry. In this paper, we describe an ultralow cost (

Electrochemical sensor has been proposed on the base of glassy carbon electrode (GCE) modified with carbon black (CB) and pillar[5]arene (P[5]A). The characteristics of the peak currents were found to be sensitive to the incubation of the sensor in organic acid and DNA solution. The detection of n×(10−8-10−5) M of organic acid and down to (1-5)×10−18 g of DNA was attributed to the effect of the analytes on the aggregation and relative stability of oxidized and reduced forms of P[5]A. No signal interference with the alkali and alkali-earth metal ions was found. The electrochemical sensor was tested in the detection of specific DNA interactions, i.e. reactive oxygen species damage and intercalating pharmaceuticals detection. [ABSTRACT FROM AUTHOR]