Search

Wind power generation using an unlimited, natural energy has been getting attention regarding environmental issues in recent years, and the installed capacity of wind power generation system is increasing at a rapid pace, resulting in deterioration of power quality especially in frequency and voltage. This fact will be a big problem in restricting large capacity of wind farms. This paper proposes a new frequency converter: rotary frequency converter (RFC) to moderate the electric output from wind generation, which is to be installed between a set of wind generators and a grid, providing a smoothed electric output, promoting the wind power generation introduction. This mainly consists of a synchronous machine and the adjustable-speed machine. Independent controls of input/output voltage, active power, and reactive power offer electrical separation between the two networks. Experimental study of a prototype model and its characteristics, especially dynamic control, is discussed in this paper. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(4): 26–34, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/eej.20922 [ABSTRACT FROM AUTHOR]

Electric utility deregulation enabled PPSs (Power Producers and Suppliers) to enter the electricity market. PPSs are supposed to achieve 30-minute balancing control for stable power supply of electric power. In addition, load rejection and instantaneous voltage drops greatly affect turbine shafting, that is, torsional torque oscillation. Therefore, PPSs must consider a reduction of torsional torque in order to prevent generator shaft damage. This paper proposes a control system which allows the achievement of both 30-minute balancing control and reduction of torsional torque by using an H∞ controller. The effectiveness of the proposed controller is validated by using MATLAB. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(1): 16–25, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/eej.20868 [ABSTRACT FROM AUTHOR]

Wind power generation is expected to become more important in future distribution systems. Although several prospective reports such as IEC 61400-24 and NREL SR-500-31115 indicate an insulation scheme and grounding design for lighting protection, there still seems to be too few investigations on the problems. This paper therefore discusses lightning surge analysis using a wind farm model with 2 or 10 ideal wind turbines. Changing parameters such as grounding resistance and lightning strike points, several cases were studied. As a result of the analysis using digital simulator ARENE, it is clear that the surge tends to propagate toward the end of a distribution line in a wind farm and there is the possibility of insulation accidents at the other wind turbines when lightning attacks a wind turbine. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(2): 30– 38, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/eej.20364 [ABSTRACT FROM AUTHOR]