Search

Historically, the long wavelength side (6–7.5 μm) of the mid‐infrared water vapor absorption band has been used for imaging from the geostationary perspective. This began with the 6.4 μm band on Europe's Meteosat‐1. While geostationary sounders for moisture profiling, including China's hyperspectral resolution infrared sounder and a planned sounder from Europe, are or will be measuring the short wavelength side of the water vapor band, this is not the case for geostationary imagers. Shorter wavelength (5–6 μm) spectral bands for imaging applications should be considered for observing moisture in the mid and lower troposphere because of several potential advantages offered by this spectral range. The short wavelength side of the water vapor band contains fewer additional absorbing gases that overlap the water vapor absorption lines. In addition, the shorter wavelengths would show less diffraction blurring which could enable finer spatial resolution for turbulence detection. This study considers some of the differences and potential advantages of the spectral information in the short wavelength side of the water vapor absorption band from the perspective of geostationary imaging. For dry conditions land heating could impact the qualitative use of observed brightness temperatures at 5.1 μm, while the solar reflection component over most clear‐sky scenes is small for a 5.1 μm band and essentially zero for a 5.6 μm band. Plain Language Summary: Long before images are sent back to Earth from satellites, the needed spectral bands have to be specified. The band specification includes attributes such as the wavelength centers, widths, and signal‐to‐noise ratio. This paper investigates the rationale for including data from a region of the electromagnetic spectrum that has not been used for imaging from geostationary orbit. If implemented, these short wavelength water vapor bands would provide unique information regarding low‐level moisture and mid‐level turbulence. This paper quantifies the expected reflected component from the sun and the influence of land heating on observations, both of which are relatively larger at shorter wavelengths. Key Points: Historically, the long wavelength side of the mid‐infrared water vapor absorption band has been used for imagingShort wavelength (near 5 μm) spectral bands should be considered, especially with finer spatial resolutionsOver most clear‐sky surfaces, the reflective component ranges from small to zero for 5.1 and 5.6 μm bands [ABSTRACT FROM AUTHOR]