Search

Current commercial aircraft ventilation design focuses on space optimization and pressure-related safety parameters. It inadequately takes into account the impact of the mixing ventilation system on pathogen dispersion in an enclosed space with low humidity. Current international guidelines relating to pathogen transfer reduction, suggest a combined approach using both traditional mixing ventilation systems and personalized ventilation. The present paper studies the impact of seat-integrated personalized ventilation diffusers on the air quality in the passenger breathing zone. The study employs an experimental setup backed by numerical simulations to evaluate the system’s potential to disperse pollutants near the breathing zone. Human thermal manikins were used to simulate the passengers in a full-scale mock-up of the airplane cabin. The velocity fields of the personalized ventilation diffusers and the thermal plume have been measured using PIV techniques. The experimental results were used to validate the CFD scenarios. The numerical part of the study used exhaled CO2 accumulation in the breathing zone to assess the effectiveness of the PV diffusers. Results indicate that the presence of the PV diffusers directs the exhaled CO2 upwards and can act as a barrier preventing pathogens from entering the breathing zone.

Thermal manikins are valuable tools used in advancing our understanding of thermal comfort. This study examines the effect of varying clothing insulation on the predicted degree of thermal comfort using a thermal manikin named MONICA (MONitoring Indoor Comfort and Air quality). The experiments were conducted in a controlled climate chamber with the room temperature maintained at 24 °C. Three different clothing configurations were tested: naked, summer clothes (0.2 clo), and winter office clothes (0.7 clo). The equivalent temperature was measured for each configuration and compared to the Predicted Mean Vote (PMV) values obtained simultaneously. Additionally, the study utilized the Background Oriented Schlieren (BOS) technique to visualize the thermally driven airflow around the manikin. The findings from this study confirm the effectiveness of the thermal manikin in simulating human thermal responses and provide valuable insights into the role of clothing insulation in thermal comfort assessments. The obtained results will be useful for choosing the right clothing insulation for future thermal comfort assessments with the manikin.

Ventilated facades represent a modern solution increasingly adopted in smart, low-energy building designs. A critical consideration in the implementation of these systems is ensuring fire resistance while simultaneously minimizing the risk of fire propagation. Modern ventilated facade solutions incorporate solar energy storage using phase change materials (PCMs). This study explores the fire performance of storage mass composed of spheres integrating paraffin-based phase-change materials combined with AlO nanomaterials in order to enhance thermal conductivity (nePCM). The investigation focuses on the behavior of these composite materials under fire conditions, providing insights into their safety and efficacy in sustainable building applications.

With the increasing focus on indoor environmental quality, driven by the growing amount of time people spend in enclosed spaces, this study presents an approach to enhancing air distribution in office environments and confined spaces. A novel low-induction air diffuser is designed to deliver fresh, clean air in close proximity to occupants while maintaining their thermal comfort. Clean, unpolluted air is pivotal to healthy and productive workplaces. Yet, this paper underscores the importance of not sacrificing thermal comfort in the pursuit of improved indoor air quality. Inadequate thermal comfort may lead occupants to deactivate ventilation systems, negating the benefits of improved air quality. Inefficient temperature control can also result in discomfort, distractions, and reduced productivity. The innovative low-induction air diffuser resolves this issue, enhancing air quality near occupants without causing thermal discomfort. By directing air gently and efficiently, this solution is prepared to transform personalized ventilation systems, mitigating the discomfort associated with traditional jet flows while delivering high-quality breathable air. This research serves as a bridge between improved indoor air quality and thermal comfort, for office environments. It introduces a practical, energy-efficient solution that satisfies the core requirements of a healthy workspace—clean air and comfortable conditions.

The amount of time spent in traffic by vehicle occupants has increased dramatically over the last two decades. This is because the average commute length and time spent stuck in traffic without a way out have increased at rates far exceeding population growth. At the same time, the quality of life has increased, in many areas of this world, leading vehicle users to prefer increased thermal comfort conditions inside the cabins when they are in traffic, a better thermal comfort in the vehicle being nowadays an important parameter when choosing a new vehicle. A solution to improve the thermal comfort of vehicle users is to uniformize the airflow inside vehicle by enhancing the mixing of the freshly introduced air with the ambient air. Based on literature previous research, air mixing can be improved by passive means using innovative air diffusers which have the ability of entraining more air than regular air diffusers. A comparative numerical study between different air diffusers will be carried out in the present paper with the help of Ansys Fluent software. The results revealed that a particular air diffuser, based on the lobed shaped cross orifice was found to entertain with 35% more air than a regular air diffuser.

This study is a part of a larger experimental and numerical campaign intended to evaluate the influence of the turbulence intensity at the inlet of the terminal air distribution systems on the local draft sensation and thermal discomfort of ventilation users. In this paper we present preliminary results of CFD simulations using a realistic model of human body along with an experimental validation. The model is further used in a piston distribution scheme to evaluate the influence of turbulence intensity on the comfort indicators. The recorded velocity, turbulence and temperature fields allowed us to estimate the distributions of DR, PPD and PMV indexes. For the investigated case, the results indicated a direct correlation.

In order to achieve more realistic boundary conditions on the inlet of a ventilation system it is necessary to study the influences of the air diffuser orifices geometry on the airflow distribution in the enclosure. Integrating these orifices directly in a real scale air diffuser for a numerical study will result in a huge computational grid which will translate in huge computational resources and a much larger calculation time. The solution, in this case, was the numerical simulation of the airflow through small parts of the studied air diffuser. Later, the numerical results will be implemented as boundary conditions in the unidirectional diffuser of a numerical simulation that represents a real scale operating room (OR). In the current study two diffusers with different orifices were studied, one having circular („O”) and the other one lobbed („+”) orifices. The initial numerical model had 25 orifices on the diffuser, but because of the very large numerical grid resulted for the initial meshes (>35 million tetrahedral cells), a solution with only 4 orifices was chosen for this study. A mesh independency study was made for these two types of air diffusers. The numerical studies were made using RANS method, with SST k-ω turbulence model in steady state conditions. The numerical results obtained with the first step models showed very good agreement with the PIV stereoscopic experimental measurements.

The current concept of Crew Quarters on board of the International Space Station has several issues according to the crew member’s feedback. Major issues concern noise levels, the accumulation of CO2 and the quality of the air distribution. Our study targets the airflow distribution, to diagnose this issue, we realise a series of numerical simulations (CFD) based on a real scale replica of the Crew Quarters. Simulations were set with a zero-gravity mode and with the theoretical air parameters inside the SSI. The geometry includes a thermal manikin having the neutral posture of a body in the absence of gravity. Numerical simulations were run for the three different air flow rates provided by the current ventilation system. Results have shown that the air distribution inside the Crew Quarter is insufficient for low airflow rates but becomes acceptable for the higher airflow rate, however the higher airflow rate can potentially produce draught discomfort.

The paper presents an analysis of the solar irradiation and the stability of the solar radiative regime, available for Bucharest and the southern area of Romania. The study is based on meteorological data measured at 3.6 seconds, on several consecutive days of each season, in the years 2017 and 2018. Data acquisition was performed at Technical University of Civil Engineering Bucharest. The daily mean values for sunshine number and sunshine stability number are computed and analysed. The analyses carried out in this research are useful for applications of solar energy and conversion to thermal energy in hot air solar collectors to estimate the temperature variation at the collector air outlet as well as for photovoltaic panels to estimate the resulting electrical energy.

An attempt at improving the ventilation solution for the crew quarters aboard the International Space Station requires a thorough understanding of the flow dynamics in a microgravity environment. An experimental study is required in order to validate the numerical models. As part of this process, a small-scale model was proposed for a detailed study of the velocity field. PIV measurements in water offer high quality results and were chosen for the subject. Following certain similitude criteria, an equivalence can be found between the results of these measurements and the real ventilation scenario. This paper describes the development process of this small-scale model as well as its performance in the initial test runs. Details regarding the advantages and weaknesses of this first model are the core of the paper, with the intention of aiding researchers in their design of similar models. The conclusion presents future steps and proposed improvements to the model.

Thermal comfort evaluation for vehicle occupants is very complicated due to the transient nature and non-uniformity of the vehicle interior. The thermal sensation of an automotive occupant is affected by the surrounding environment. More than this, the actual standard is proposing three evaluation indexes and was developed for steady state and controlled conditions and some of the indexes are not adapted for this complex environment. In this article the three standardized indexes values are compared in term of thermal comfort, in a vehicle passenger in summer season. The results are showing that the mean values of PMV/PPD model calculated in a single point with Comfort Sense equipment are far from the TSV mean values which was collected in questionnaires, while the teq index which was calculated with an advanced thermal manikin are closer to the TSV comfort votes. This may be explained by the fact that the TSV and teq consider the sensation for each body part at the local level. For a correct evaluation of the thermal comfort in non-uniform and transient environments like in the vehicles, is not enough to measure in a single point and the results to be considered in all the ambiance. The main conclusion is that the PMV/PPD indexes are not very well adapted to the vehicle environment.

The main declared goal of all car manufacturers is to ensure high comfort inside the cabin and to reduce the fossil fuel. It is well-known that the time spent by the people indoor has raised in the last decade. The distance between the home and the workplace increased due to diversity of activities and hence job diversity. The thermal comfort during the travel must to be ensured to reduce the occupant’s thermal stress. The present study is investigating a comparison between the measured data and the numerical simulation results in the case when the ventilation system is functioning. It was evaluated the effect of the boundary conditions air flow and air velocity distribution in a passenger compartment in two cases: first is the general used constant inlet flow and the second is a new approach of importing the measured data obtained during the experimental measurement session as a boundary condition.CFD simulations were made taking as input the measured data obtained during experimental session. We have observed differences between initial simulation results and the measured data, therefore, for more accurate results, a new approach is needed, to impose as boundary conditions the measured data.

The present paper analyses the airflow through the lobed orifices of a transpired solar collector which acts as a solar ventilated facade element through numerical simulation. This study is part of a complex research project which analyses the implementation of phase changing materials within air solar collectors. We decided to study an elementary part of the collectors' absorbent plate with four equivalent orifices in order to obtain the velocity and temperature field at the outlet of the computing domain since the numerical simulation of the entire solar collector (more than 5000 orifices) is not feasible due to the big amount of computational resources and time needed. This paper presents the experimental validation of the numerical model, its final parameters and preliminary results. The numerical simulation was conducted using Ansys Fluent CFD software and the results were processed via Tecplot. The boundary conditions imposed were emphasised and k-ε RNG turbulence model was used according to the literature. After comparing the velocity profiles and temperature fields obtained with both experimental and numerical approaches we concluded that the numerical model reproduces real flow phenomena within acceptable limits. The numerical model thus obtained will be used in further studies in order to optimise the collectors' geometry and characteristics by means of parametrical analyses.

The aim of this study is to determine how the air flow from a unidirectional air flow (UAF) system and a local ventilation system will interact with each other. The study analyzes the air circulation near the operating table at different air flow velocities from both systems. The air flow velocities correspond to the usual range of velocities recommended by norms and guidelines. The research was approached by numerical and experimental studies. The thermal plume of the occupants (patient and surgeon) were measured by Particle Image Velocimetry (PIV) and thermography (IR). The results of the measurements were compared with the results from the numerical case. A mesh independence study was carried out for the numerical case. The study showed that velocities ≥0.2 m/s from the UAF, depending on the height of the room, can overcome the thermal plume generated by a human subject with a moderate activity (100÷120W). The velocities from the local ventilation system need to be higher with at least one step, in accordance with the distance from the ventilation system to the operating wound, in order to avoid disturbances generated from the UAF system.

This paper presents a study for two thermal plumes generated by two humanoid thermal manikins, one standing and one lying down. The research was approached from a numerical and experimental perspective. The numerical model represents an operating room (OR) with two surgeons, a patient and a unidirectional air flow (UAF) diffuser. The experimental study was made in a climatic chamber, having a similar air distribution system, using particle image velocimetry (PIV) and infrared thermography (IR) measurements. The purpose of the study was to characterize the thermal plumes of the two manikins by numerical and experimental studies. The results obtained from these different approaches were compared with each other and with the ones from the literature in order to validate our numerical models.

Quality of life on the International Space Station (ISS) has become more and more important, since the time spent by astronauts outside the terrestrial atmosphere has increased in the last years. The actual concept for the Crew Quarters (CQ) have demonstrated the possibility of a personal space for sleep and free time activities in which the noise levels are lower, but not enough, compared to the noisy ISS isle way. However, there are several issues that needs to be improved to increase the performance of CQ. Our project QUEST is intended to propose a new concept of CQ in which we will correct these issues, like the noise levels will be lower, more space for astronaut, increased thermal comfort, reduce the CQ total weight, higher efficiency for the air distribution, personalized ventilation system in CQ for the crew members in order to remove CO2 from the breathing zone. This paper presents a CFD study in which we are comparing the actual and a proposed ventilation solution for introducing the air in CQ. A preliminary numerical model of the present configuration of the air distribution system of the Crew Quarters on board of the ISS, shows the need for an improved air distribution inside these enclosures. Lower velocity values at the inlet diffuser, distributed over a larger surface, as well as diffusers with improved induction would appear to be a better choice. This was confirmed through the development of a new model including linear diffusers with a larger discharge surface. In this new configuration, the regions of possible draught are dramatically reduced. The overall distributions of the velocity magnitudes displaying more uniform, lower values, in the same time with more uniform temperatures. All these observations allow us to consider a better mixing of the air inside the enclosure.

Nowadays, thermal comfort became one of the criteria in choosing a vehicle. In last decades time spent by people in vehicles had risen substantially. During each trip, thermal comfort must to be ensured for a good psychological and physical state of the passengers. Also, a comfortable environment leads to a higher power concentration of the driver thereby to a safe trip for vehicle occupants and for all traffic participants. The present study numerically investigated the effect of human body sited in the driver's place, over the air velocity distribution and over the thermal comfort in a passenger compartment. CFD simulations were made with different angles of the left inlet grill, in both cases, with and without driver presence. In majority of the actual vehicles environment studies, are made without consideration of human body geometry, in this case, the results precision can be affected. The results show that the presence of human body, lead to global changing of the whole flow pattern inside the vehicular cabin. Also, the locations of the maximum velocities are changing with the angle of the guiding vanes. The thermal comfort PMV/PPD indexes were calculated for each case. The presence of human body leads to a more comfortable environment.

The paper focus on the air quality inside the Crew Quarters on board of the International Space Station. Several issues to improve were recorded by NASA and ESA and most important of them are the following: noise level reduction, CO2 accumulation reduction and dust accumulation reduction. The study in this paper is centred on a reduced scaled model used to provide simulations related to the air diffusion inside the CQ. It is obvious that a new ventilation system is required to achieve the three issues mentioned above, and the solutions obtained by means of numerical simulation need to be validated by experimental approach. First of all we have built a reduced scaled physical model to simulate the flow pattern inside the CQ and the equipment inside the CQ has been reproduced using a geometrical scale ratio. The flow pattern was considered isothermal and incompressible. The similarity criteria used was the Reynolds number to characterize the flow pattern and the length scale was set at value 1/4. Water has been used inside the model to simulate air. Velocity magnitude vectors have been obtained using PIV measurement techniques.

Numerical simulation of climate conditions in automotive industry for the study of thermal comfort had become more and more prominent in the last years compared with the classical approach which consists in wind tunnel measurements and field testing, the main advantages being the reduction of vehicle development time and costs. The study presented in this paper is a part of a project intended to evaluate different strategies of cabin ventilation for improving the thermal comfort inside vehicles. A virtual thermal manikin consisting of 24 parts was introduced on the driver seat in a vehicle. A heat load calculated for summer condition in the city of Cluj-Napoca, Romania was imposed as boundary condition. The purpose of this study was to elaborate a virtual thermal manikin suitable for our research, introduction of the manikin inside the vehicle and to examine his influence inside the automobile. The thermal comfort of the virtual manikin was evaluated in terms of temperature and air velocity.

The main objective of this study was to determine the effect of fire in a nonventilated corridor. A real-scale model of a corridor has been modeled in Fire Dynamics Simulator(F.D.S.) in order to determine the evolution of indoor temperatures, the visibility and the oxygen quantities during a fire. The start time of a sprinkler has also been determined. The use of sprinklers in buildings has become a necessity and a requirement imposed by technical norms. The provision of this type of installation has become a common feature in buildings with a high fire risk, with two main effects: fire extinction and protection of structural and partition elements from high temperatures[15]. The ultimate goal is to ensure optimal conditions for saving the building users, intervention teams and maintaining the stability of the building. Low temperatures and good visibility on the escape routes during a fire are the basic conditions to ensure the optimal evacuation of users.

Nowadays, there is an increasing emphasis on indoor air quality due to technological evolution and the fact that people spend most of the time in enclosed spaces. Also, energy efficiency is another related factor that gains more and more attention. Improving air distribution in an enclosure can lead to achieve these goals. This improvement can be done by adjustingthe air terminals position, theredimensions or the air diffuser perforations. The paper presents the study of 8 types of panels with different perforations shapes. The systems were characterized by flow, pressure loss and noise. Usualand special geometries were chosen, all having the same flowsurface. The perforated panels were mounted in a unidirectional air flow (UAF)diffuser, also called a laminar air flow (LAF)diffuser, that is placed in a real scale operating room (OR) in our laboratory.The purpose of this study is to determine whether changing the shape in the perforated panels can improve the technical parameters of the diffuser.

In industrial applications, heat and mass transfer can be considerably increased using impinging jets. A large number of flow phenomena will be generated by the impinging flow, such as: large scale structures, large curvature involving strong shear and normal stresses, stagnation in the wall boundary layers, heat transfer with the impinged wall, small scale turbulent mixing. All these phenomena are highly unsteady and even if nowadays a substantial number of studies in the literature are dedicated, the impinging jets are still not fully understood due to the highly unsteady nature and more over due to great difficulty of performing detailed numerical and experimental investigations.

Urban pollution represents an increasing risk to residents of urban regions, particularly in large, over-industrialized cities knowing that the traffic is responsible for more than 25% of air gaseous pollutants and dust particles. Air quality modelling plays an important role in addressing air pollution control and management approaches by providing guidelines for better and more efficient air quality forecasting, along with smart monitoring sensor networks. The advances in technology regarding simulations, forecasting and monitoring are part of the new smart cities which offers a healthy environment for their occupants.