Search

The paper obtained during the study was mainly obtained from wheat straw cellulose and Jerusalem artichoke cellulose, which contained chitosan of various concentrations. An increase in the mechanical properties of the obtained papers was observed in samples using the substance chitosan. A 1.0% chitosan was added to the paper, mainly based on various plant celluloses. It should be noted that the obtained paper products were used without bleaching due to the fact that it was recommended to use them for wrapping paper. The youngest results were observed in samples prepared from a composition of wheat straw and artichoke pulp. From the fiber morphology, it was observed that the sized paper fibers became stronger, denser and smoother. Keywords: chytazone, Natural polymers, fibers, cellulose. Biocomposites of chitosan (CS)/cellulose nanocrystals (CN) were prepared by using solution casting method. Influences of solution preparation method and CN content on the properties of composites were investigated. Mechanical stirring/ultrasonication or micro fluidization were used to disperse nanocrystals in the chitosan matrix. The prepared nanocomposites were characterized by FTIR, XRD, SEM, DSC, TGA, TMA and contact angle measurements.

The filter paper bio-templating method has become a promising pathway in the fabrication of MgO with tunned physicochemical features. The filter paper-templated MgO (MgO-FPT) has been subjected to several characterisation analyses, and it has revealed that filter paper templating has demonstrated a positive outcome toward an improvement of physicochemical features, i.e., improved surface reactivity and surface area compared to MgO prepared via direct thermal degradation method of magnesium salt (MgO-CT). As the evidence of the FTIR spectra, the MgO-FPT has demonstrated a surface rich CO2-associated functional group, which indicate the enhanced surface reactivity of the MgO, which increase of the adsorbent affinity toward CO2 (even from atmospheric surrounding). Together with the improved structural features compared to MgO-CT (two-fold high surface area), it has significantly refined the CO2 adsorption uptake capacity to almost 15 times higher than MgO-CT with only 0.247 mmol/g. This shows the potential filter paper bio-templating method for the metal oxide-based adsorbent fabrication for CO2 adsorption application.

A chitosan based coating was prepared where eggshell powder was added. Eggshell is a product that appears in large numbers in everyday life, so it has great potential as waste, which can be used to turn it into a valuable material. Cellulose sheets were made from secondary fiber, and after coated with the chitosan based solution to investigate the properties of the sheets. The results of the treated handsheets were compared with the results of the control sheet. The control sheets were compared with 4 different type of paper: coatings of chitosan with 5wt% and 10wt% eggshell powder, only chitosan coating, and paper where eggshell powder was added to the paper pulp. The use of the eggshell powder as an additive in the coating would be a promising material, because it can improve in a large extent the water resistance and the air barrier properties of the paper.

The Paper industry is an energy-intensive and one of the most energy-consuming industries in Indonesia. In this study, Paper Mill energy sources come from coal and renewable energy such as black liquor as a substitute for coal and on-grid 9MW PV system are reassessed by using optimization software, HOMER. This study aims to present a feasibility study of increasing the use of renewable energy sources in Paper Mill to reduce coal consumption for more sustainability. The software HOMER is used as a tool to determine the most feasible combination of component considered in the study. It is feasible to reduce 10,84% coal consumption kg per year with the optimal renewable energy mix consisting of additional 24MW rooftop PV system and 5,94kW hydrokinetic energy from Kampar River located 6 km from the plant. Renewable fraction increased to 16%. This study result is good for sustainable growth of Paper Mill business that investments in climate and nature to support the Indonesian government in achieving net zero emissions.

In this study, cellulose was extracted from Heliánthus tuberósus (Jerusalem artichoke) stems, and its quality indicators were thoroughly investigated. The isolation process involved the removal of impurities and non-cellulosic components, resulting in a purified cellulose sample suitable for further analysis and application.To explore the potential of Heliánthus tuberósus cellulose, composite paper was produced by incorporating basalt fiber into the cellulose matrix. The resulting paper was subjected to comprehensive testing to evaluate its mechanical properties, with a particular focus on tensile strength and tensile length.The tensile strength of the composite paper was determined using standardized testing methods, providing quantitative data on the material's ability to withstand applied forces without breaking or deforming. Tensile length, on the other hand, refers to the maximum elongation the paper can undergo before rupture occurs. These properties were assessed to gauge the overall performance and suitability of the composite paper for various applications.The obtained results were presented in a clear and concise manner, utilizing tables and graphs to facilitate data interpretation and comparison. Tables allowed for the tabulation of the measured tensile strength and tensile length values, providing a comprehensive overview of the material's mechanical characteristics. Graphs were employed to visualize trends, patterns, and potential correlations between different variables, aiding in a deeper understanding of the composite paper's behavior under various loading conditions.

Abstract. In this study, a composite material was successfully produced by incorporating waste paper and basalt fibers. The utilization of waste paper as a raw material contributes to sustainable practices and waste reduction. The physical and mechanical properties of the obtained composite material were comprehensively investigated to evaluate its potential for various applications.The physical parameters of the composite material, such as density and porosity, were measured to assess its structural characteristics. Density provides insights into the compactness and mass per unit volume of the composite, while porosity indicates the presence of voids or open spaces within the material. These parameters play a crucial role in determining the overall performance and suitability of the composite for specific applications.Furthermore, the mechanical properties of the composite material were examined to evaluate its strength, stiffness, and durability. Tensile strength, flexural strength, and impact resistance were among the key mechanical parameters studied. Tensile strength determines the material's ability to withstand pulling forces, while flexural strength measures its resistance to bending or deformation. Impact resistance evaluates the material's ability to absorb energy when subjected to sudden or dynamic loads.

A worldwide evaluation of the present status of renewable-energy generation, with a focus on photo-voltaic (PV) solar energy for the production of electricity. The most pertinent elements of the development and experiences of nations working to build and use these technologies are covered in this article. It also cites studies that highlight the efforts made by nations to reduce their emissions of green-house gas or to enhance the quality and accessibility of electric energy generation in light of their unique geographic and environmental circumstances. These studies focus in particular on remote communities that have limited access to the national power grid due to technological or financial constraints. This paper focusses on renewable-energy might serve as a starting point for assessing how clean energy affects the world's energy supply and demand, they are becoming an increasingly popular option in terms of cost and efficiency, which can attract new investors. By analysing recent data, case studies, and literature, this review aims to provide stakeholders with insights into the achievements and hurdles of solar energy, fostering informed decisions towards a sustainable and resilient energy future.

Capital structure is the combination or proportion of various sources. An organization can procure funds by issuing equity shares, preference shares and debentures to the public. Apart from this, they may also borrow from the banks or financial institutions. These are the various sources available for a concern for procuring or mobilizing the capital. Whether capital is needed initially or additional fund needed for the smooth function there are various sources available for mobilizing the capital or fund. While designing the financial or capital structure manager has to consider the overall cost which will incur after constructing the capital structure. Paper industry is selected for the research. Five companies listed in the Bombay Stock Exchange were selected for the study. An attempt has been made to study the components of capital structure of paper industry.

In this article the possibility of using licorice root waste as a fibrous raw material in the pulp and paper industry is investigated. It is shown it is possible to add up to 25% of bleached cellulose from licorice root waste to the paper composition for the production of writing paper.

Land degradation has a big influence for Central Asia. The territory of Central Asia is rarely discovered and it can be seen by the number of published papers in English. There is a high potential of applying remote sensing (RS) and geographical information systems (GIS) for the mapping and monitoring of degraded lands. In the present research we tried to collect all Scopus-based publications in English for 20 years using land degradation as a keyword. We analyzed the most popular journals, top authors, top-cited papers, top countries, and the role of remote sensing (RS) and geographic information systems (GIS) in the land degradation issues of Central Asia. RS and GIS technologies are good tools, but in Central Asia researchers have to spread them widely. Data-sharing systems and lack of international cooperation could bring more joint projects and publications on land degradation issues.