Search

Tectona grandis is the second most important species for reforestation in Costa Rica, and any improvement in its industrialization process is important, especially the drying process. Lumber obtained from a plantation of 12-year-old T. grandis trees was used to evaluate three drying schedules that include integrated steaming processes to determine the combined effect of the steam-drying system on the dried lumber. The variations in the moisture content (MC) and drying rate (DR) with drying time (DT) both before and after the steaming process were modeled mathematically for boards that have a flat and quarter grain pattern. For both types of boards that were dried with and without steaming, a relationship between MC and DT was observed. There was inflexion at 40%, and two mathematical models were computed. Additionally, the relationship between DR and DT for boards with flat and quarter grain patterns was not affected by the steaming process, and an inflection point was observed at 30 h (40% MC for...

Tectona grandis and Gmelina arborea are common in commercial reforestation in the tropics. However, color variations, moisture content, and drying defects are also present in dried lumber. Moisture content variations, drying defects, and color changes were evaluated in the present work for three drying methods (kiln, solar, and air drying) during three seasons (dry, rainy, and transition season) in Costa Rica. According to the results, kiln drying had the fastest drying times, regardless of the season. On the other hand, air drying had slower drying time and higher final moisture content. With regard to defects, kiln drying produced the highest number and magnitude of defects in both species, whereas air drying showed the lowest quantity and severity of defects. No variations due to the drying methods or the season were observed in check and split, though solar drying presented intermediate values in all drying defects. The seasons of the year did not present any effect on drying defects. Finally, T. gran...

Acacia mangium is an important plantation species cultivated in Costa Rica and other tropical countries worldwide. However, wood uses have been limited due to drying-related problems such as high initial moisture content (MCi) and high variability in final moisture content (MCf). The objective of this study was to investigate the causes of these problems. Climatic conditions where trees grow, tree height, grain pattern, drying schedules, distance from pith, and sapwood or heartwood presence were considered. Results showed an average MCi of 127% ranging from 58 to 186%. MCi variation was influenced by climatic conditions, tree height, and grain pattern. Average MCf was 19%, ranging from 9 to 52%. Lack of MCf uniformity after drying is influenced by tree height, drying schedule, and the interaction of both factors. Wet pockets were also found to develop during drying. Lumber from trees growing in humid tropical climates subjected to a low relative humidity drying schedule as well as rift-sawn or double rift...