Search

Nano- and micro-technologies can salvage drugs with very low solubility that were doomed to pre-clinical and clinical failure. A unique design approach to develop drug nanocrystals (NCs) loaded in extended release polymeric microparticles (MPs) for local treatments is presented here through the case of a potential osteoarthritis (OA) drug candidate for intra-articular (IA) administration. Optimizing a low-shear wet milling process allowed the production of NCs that can be subsequently freeze-dried (FD) and redispersed in a hydrophobic polymer-organic solvent solution to form spray-dried MPs. Results demonstrated a successful development of a ready-to-upscale formulation containing PLGA MPs with high drug NC encapsulation rates that showed a continuous and controlled drug release profile over four months. The screenings and procedures described allowed for identifying and overcoming common difficulties and challenges raised along the drug reduction to nano-size and spray-drying process. Above all, the technical knowledge acquired is intended for formulation scientists aiming to improve the therapeutic perspectives of poorly soluble drugs. [ABSTRACT FROM AUTHOR]

Polymeric microparticles are widely used as drug delivery platforms either alone or embedded in more complex structures for regenerative medicine. Emulsion-solvent evaporation is the most extensively used technique for microparticles preparation. Despite the apparent simplicity of this method, there is no general procedure for producing microparticles of predictable characteristics (particle size, size distribution, encapsulation efficiency, and drug loading). Hybrid systems such as neurofuzzy logic allow identifying relationships between inputs and outputs, expressing the generated mathematical models through rules in linguistic format. In this work, the relationships between the variables involved in the emulsion-solvent evaporation process and the quality parameters of PLGA microparticles as drug delivery systems were established. Neurofuzzy logic software was able to generate models of high predictability (> 85%) for the microspheres properties namely particle size, size distribution, encapsulation efficiency and drug loading. Moreover, the generated sets of IF-THEN rules allowed to dictate general guidelines to better select the PLGA microparticles formulation parameters. This approach would be of great interest as a starting point to set-up protocols for the development of PLGA microparticles obtained by emulsion-solvent evaporation for many applications. [ABSTRACT FROM AUTHOR]

AbstractNano- and micro-technologies can salvage drugs with very low solubility that were doomed to pre-clinical and clinical failure. A unique design approach to develop drug nanocrystals (NCs) loaded in extended release polymeric microparticles (MPs) for local treatments is presented here through the case of a potential osteoarthritis (OA) drug candidate for intra-articular (IA) administration. Optimizing a low-shear wet milling process allowed the production of NCs that can be subsequently freeze-dried (FD) and redispersed in a hydrophobic polymer-organic solvent solution to form spray-dried MPs. Results demonstrated a successful development of a ready-to-upscale formulation containing PLGA MPs with high drug NC encapsulation rates that showed a continuous and controlled drug release profile over four months. The screenings and procedures described allowed for identifying and overcoming common difficulties and challenges raised along the drug reduction to nano-size and spray-drying process. Above all, the technical knowledge acquired is intended for formulation scientists aiming to improve the therapeutic perspectives of poorly soluble drugs.

AbstractPolymeric microparticles are widely used as drug delivery platforms either alone or embedded in more complex structures for regenerative medicine. Emulsion-solvent evaporation is the most extensively used technique for microparticles preparation. Despite the apparent simplicity of this method, there is no general procedure for producing microparticles of predictable characteristics (particle size, size distribution, encapsulation efficiency, and drug loading). Hybrid systems such as neurofuzzy logic allow identifying relationships between inputs and outputs, expressing the generated mathematical models through rules in linguistic format. In this work, the relationships between the variables involved in the emulsion-solvent evaporation process and the quality parameters of PLGA microparticles as drug delivery systems were established. Neurofuzzy logic software was able to generate models of high predictability (> 85%) for the microspheres properties namely particle size, size distribution, encapsulation efficiency and drug loading. Moreover, the generated sets of IF-THEN rules allowed to dictate general guidelines to better select the PLGA microparticles formulation parameters. This approach would be of great interest as a starting point to set-up protocols for the development of PLGA microparticles obtained by emulsion-solvent evaporation for many applications.

Ulcerative colitis (UC) is a chronic disease, which can result the inflammation of the rectum, mucosa of the colon, and submucosa. The active component such as polypeptide in Periplaneta americana, which is one of the most common insects in the nature, can be extracted to treat UC. However, the active components in Periplaneta americana extract (PAE) can be degraded in the stomach due to its extreme acidic environment and enzyme. In this study, we developed a pH-dependent drug delivery method using polymer cellulose acetate (Eudragit S100) as a carrier to deliver high concentration PAE to inflamed colon. Both in vitro and in vivo results showed the PAE-Eudragit-S100 could treat UC through delivering active drug components to colon without degradation.

Chitosan glutamate (gCS) spray-dried microparticles appear promising carriers to overcome challenges associated with vaginal microbicide delivery. This study aimed at elucidating the penetration and mucoadhesive behavior of developed gCS multiunit carriers with zidovudine (ZVD) as a model antiretroviral agent in contact with excised human vaginal epithelium followed with an examination of in vitro antiherpes activity in immortal human keratinocytes HaCaT and human vaginal epithelial cells VK2-E6/E7. Both ZVD dispersion and placebo microparticles served as controls. Microparticles displayed feasible (comparable to commercial vaginal product) mucoadhesive and mucoretention characteristics to isolated human vaginal tissue. Ex vivo penetration studies revealed that gCS increased the accumulation of active agent in the vaginal epithelium but surprisingly did not facilitate its penetration across human tissue. Finally, the obtained antiviral results demonstrated the potential of gCS as an antiherpes adjunctive, whose mode of action was related to blocking viral attachment.

The present study reports the generation of 2-hydroxyethyl starch microparticles for co-delivery and controlled release of multiple agents. The obtained microparticles are characterized by using Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction analysis, energy-dispersive X-ray spectroscopy, and scanning electron microscopy. By using ofloxacin and ketoprofen as drug models, the release sustainability of the microparticles is examined at pH 1.2, 5.4, and 6.8 at 37 °C, with Fickian diffusion being found to be the major mechanism controlling the kinetics of drug release. Upon being loaded with the drug models, the microparticles show high efficiency in acting against Escherichia coli and Bacillus cereus. The results suggest that our reported microparticles warrant further development for applications in which co-administration of multiple bioactive agents is required.

Through the controlled addition of divalent cations, polyhistidine-tagged proteins can be clustered in form of chemically pure and mechanically stable micron-scale particles. Under physiological conditions, these materials act as self-disintegrating protein depots for the progressive release of the forming polypeptide, with potential applications in protein drug delivery, diagnosis, or theragnosis. Here we have explored the in vivo disintegration pattern of a set of such depots, upon subcutaneous administration in mice. These microparticles were fabricated with cationic forms of either Zn, Ca, Mg, or Mn, which abound in the mammalian body. By using a CXCR4-targeted fluorescent protein as a reporter building block we categorized those cations regarding their ability to persist in the administration site and to sustain a slow release of functional protein. Ca2+ and specially Zn2+ have been observed as particularly good promoters of time-prolonged protein leakage. The released polypeptides result is available for selective molecular interactions, such as specific fluorescent labeling of tumor tissues, in which the protein reaches nearly steady levels.

Through the controlled addition of divalent cations, polyhistidine-tagged proteins can be clustered in form of chemically pure and mechanically stable micron-scale particles. Under physiological conditions, these materials act as self-disintegrating protein depots for the progressive release of the forming polypeptide, with potential applications in protein drug delivery, diagnosis, or theragnosis. Here we have explored the in vivo disintegration pattern of a set of such depots, upon subcutaneous administration in mice. These microparticles were fabricated with cationic forms of either Zn, Ca, Mg, or Mn, which abound in the mammalian body. By using a CXCR4-targeted fluorescent protein as a reporter building block we categorized those cations regarding their ability to persist in the administration site and to sustain a slow release of functional protein. Ca2þ and specially Zn2þ have been observed as particularly good promoters of time-prolonged protein leakage. The released polypeptides result is available for selective molecular interactions, such as specific fluorescent labeling of tumor tissues, in which the protein reaches nearly steady levels. [ABSTRACT FROM AUTHOR]

Chitosan glutamate (gCS) spray-dried microparticles appear promising carriers to overcome challenges associated with vaginal microbicide delivery. This study aimed at elucidating the penetration and mucoadhesive behavior of developed gCS multiunit carriers with zidovudine (ZVD) as a model antiretroviral agent in contact with excised human vaginal epithelium followed with an examination of in vitro antiherpes activity in immortal human keratinocytes HaCaT and human vaginal epithelial cells VK2-E6/E7. Both ZVD dispersion and placebo microparticles served as controls. Microparticles displayed feasible (comparable to commercial vaginal product) mucoadhesive and mucoretention characteristics to isolated human vaginal tissue. Ex vivo penetration studies revealed that gCS increased the accumulation of active agent in the vaginal epithelium but surprisingly did not facilitate its penetration across human tissue. Finally, the obtained antiviral results demonstrated the potential of gCS as an antiherpes adjunctive, whose mode of action was related to blocking viral attachment. [ABSTRACT FROM AUTHOR]

The present study reports the generation of 2-hydroxyethyl starch microparticles for co-delivery and controlled release of multiple agents. The obtained microparticles are characterized by using Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction analysis, energy-dispersive X-ray spectroscopy, and scanning electron microscopy. By using ofloxacin and ketoprofen as drug models, the release sustainability of the microparticles is examined at pH 1.2, 5.4, and 6.8 at 37 -C, with Fickian diffusion being found to be the major mechanism controlling the kinetics of drug release. Upon being loaded with the drug models, the microparticles show high efficiency in acting against Escherichia coli and Bacillus cereus. The results suggest that our reported microparticles warrant further development for applications in which co-administration of multiple bioactive agents is required. [ABSTRACT FROM AUTHOR]

Prostate cancer is a leading cause of death in men and despite improved surgical procedures that aid tumor resection, the risk of recurrence after surgery as a result of positive resection margins remains significant. Adjuvant chemotherapy is often required but this is associated with toxicity. Improved ways of delivering highly toxic chemotherapeutic drugs in a more controlled and targeted manner after the prostate has been removed during surgery could reduce the risk of recurrence and avoid systemic toxicity. The aim of this study was to develop a novel drug-device combination tissue scaffold that can be used to deliver the chemotherapeutic agent, docetaxel, into the tissue cavity that is created following radical prostatectomy. The device component investigated consisted of highly porous, poly(dl-lactide-co-glycolide) microparticles made using thermally induced phase separation. A facile method was established for loading docetaxel with high efficiency within one hour. Sustained drug release was observed from the microparticles when placed into a dynamic system simulating tissue perfusion. The drug released from the microparticles into perfusates collected at regular time intervals inhibited colony formation and exhibited sustained cytotoxicity against 3D spheroids of PC3 prostate cancer cells over 10 days. In conclusion, this study demonstrates the concept of combining docetaxel with the biodegradable microparticles at the point of care is technically feasible for achieving an effective drug-device combination tissue scaffold. This approach could provide an effective new approach for delivering adjuvant chemotherapy following radical prostatectomy.

Nasal administration has been proposed as a potential approach for the delivery of drugs to the central nervous system. Ribavirin (RBV), an antiviral drug potentially useful to treat viral infections both in humans and animals, has been previously demonstrated to attain several brain compartments after nasal administration. Here, a powder formulation in the form of agglomerates comprising micronized RBV and spray-dried microparticles containing excipients with potential absorption enhancing properties, i.e. mannitol, chitosan, and α-cyclodextrin, was developed for nasal insufflation. The agglomerates were characterized for particle size, agglomeration yield, and ex vivo RBV permeation across rabbit nasal mucosa as well as delivery from an animal dry powder insufflator device. Interestingly, permeation enhancers such as chitosan and mannitol showed a lower amount of RBV permeating across the excised nasal tissue, whereas α-cyclodextrin proved to outperform the other formulations and to match the highly soluble micronized RBV powder taken as a reference. In vivo nasal administration to rats of the agglomerates containing α-cyclodextrin showed an overall higher accumulation of RBV in all the brain compartments analyzed as compared with the micronized RBV administered as such without excipient microparticles. Hence, powder agglomerates are a valuable approach to obtain a nasal formulation potentially attaining nose-to-brain delivery of drugs with minimal processing of the APIs and improvement of the technological and biopharmaceutical properties of micronized API and excipients, as they combine optimal flow properties for handling and dosing, suitable particle size for nasal deposition, high surface area for drug dissolution, and penetration enhancing properties from excipients such as cyclodextrins.

Surfactin, a lipopeptide produced by Bacillus species, has been used for the oral delivery of insulin. In this study, another lipopeptide of iturin was tested for its ability to orally delivery insulin alone or plus surfactin. Iturin could form co-precipitate with insulin at acidic pH values. After treatment by ultrasonification, the structure of coprecipitate was destroyed that led to a significant decrease in hypoglycemic effect after oral administration. Iturin weakly binds to (Kd = 257 μM) and induce insulin structure more compact that is favorable for insulin uptake by the intestine. After being coated with Acryl-Eze by lyophilization, the coprecipitate formed the spherical enteric-coated insulin microparticles delivered by iturin with a relative oral bioavailability of 6.84% in diabetic mice. For further improving oral hypoglycemic effect, surfactin was added to form the spherical enteric-coated insulin microparticles in a formulation containing insulin, Acryl-Eze, iturin and surfactin at a ratio of 1:1:0.5: 0.5 (w/w), with an insulin encapsulation efficiency of 66.22%. The enteric-coated insulin microparticles delivered by iturin plus surfactin showed a classical profile for controlled release in the intestine with a relative bioavailability of 7.67% after oral administration, which could effectively control the postprandial blood glucose at a level about 50% of the initial one just like the subcutaneous injection. Collectively, iturin plus surfactin is more efficient for oral delivering insulin than the sole one, and the resultant enteric-coated insulin microparticles are potential for the development of oral insulin to control postprandial blood glucose in diabetic patients.

Prostate cancer is a leading cause of death in men and despite improved surgical procedures that aid tumor resection, the risk of recurrence after surgery as a result of positive resection margins remains significant. Adjuvant chemotherapy is often required but this is associated with toxicity. Improved ways of delivering highly toxic chemotherapeutic drugs in a more controlled and targeted manner after the prostate has been removed during surgery could reduce the risk of recurrence and avoid systemic toxicity. The aim of this study was to develop a novel drug-device combination tissue scaffold that can be used to deliver the chemotherapeutic agent, docetaxel, into the tissue cavity that is created following radical prostatectomy. The device component investigated consisted of highly porous, poly(dl-lactide-co-glycolide) microparticles made using thermally induced phase separation. A facile method was established for loading docetaxel with high efficiency within one hour. Sustained drug release was observed from the microparticles when placed into a dynamic system simulating tissue perfusion. The drug released from the microparticles into perfusates collected at regular time intervals inhibited colony formation and exhibited sustained cytotoxicity against 3D spheroids of PC3 prostate cancer cells over 10 days. In conclusion, this study demonstrates the concept of combining docetaxel with the biodegradable microparticles at the point of care is technically feasible for achieving an effective drug-device combination tissue scaffold. This approach could provide an effective new approach for delivering adjuvant chemotherapy following radical prostatectomy. [ABSTRACT FROM AUTHOR]

Nasal administration has been proposed as a potential approach for the delivery of drugs to the central nervous system. Ribavirin (RBV), an antiviral drug potentially useful to treat viral infections both in humans and animals, has been previously demonstrated to attain several brain compartments after nasal administration. Here, a powder formulation in the form of agglomerates comprising micronized RBV and spray-dried microparticles containing excipients with potential absorption enhancing properties, i.e. mannitol, chitosan, and α-cyclodextrin, was developed for nasal insufflation. The agglomerates were characterized for particle size, agglomeration yield, and ex vivo RBV permeation across rabbit nasal mucosa as well as delivery from an animal dry powder insufflator device. Interestingly, permeation enhancers such as chitosan and mannitol showed a lower amount of RBV permeating across the excised nasal tissue, whereas α-cyclodextrin proved to outperform the other formulations and to match the highly soluble micronized RBV powder taken as a reference. In vivo nasal administration to rats of the agglomerates containing α-cyclodextrin showed an overall higher accumulation of RBV in all the brain compartments analyzed as compared with the micronized RBV administered as such without excipient microparticles. Hence, powder agglomerates are a valuable approach to obtain a nasal formulation potentially attaining nose-to-brain delivery of drugs with minimal processing of the APIs and improvement of the technological and biopharmaceutical properties of micronized API and excipients, as they combine optimal flow properties for handling and dosing, suitable particle size for nasal deposition, high surface area for drug dissolution, and penetration enhancing properties from excipients such as cyclodextrins. [ABSTRACT FROM AUTHOR]

Surfactin, a lipopeptide produced by Bacillus species, has been used for the oral delivery of insulin. In this study, another lipopeptide of iturin was tested for its ability to orally delivery insulin alone or plus surfactin. Iturin could form co-precipitate with insulin at acidic pH values. After treatment by ultrasonification, the structure of coprecipitate was destroyed that led to a significant decrease in hypoglycemic effect after oral administration. Iturin weakly binds to (Kd = 257 μM) and induce insulin structure more compact that is favorable for insulin uptake by the intestine. After being coated with Acryl-Eze by lyophilization, the coprecipitate formed the spherical enteric-coated insulin microparticles delivered by iturin with a relative oral bioavailability of 6.84% in diabetic mice. For further improving oral hypoglycemic effect, surfactin was added to form the spherical enteric-coated insulin microparticles in a formulation containing insulin, Acryl-Eze, iturin and surfactin at a ratio of 1:1:0.5: 0.5 (w/w), with an insulin encapsulation efficiency of 66.22%. The enteric-coated insulin microparticles delivered by iturin plus surfactin showed a classical profile for controlled release in the intestine with a relative bioavailability of 7.67% after oral administration, which could effectively control the postprandial blood glucose at a level about 50% of the initial one just like the subcutaneous injection. Collectively, iturin plus surfactin is more efficient for oral delivering insulin than the sole one, and the resultant enteric-coated insulin microparticles are potential for the development of oral insulin to control postprandial blood glucose in diabetic patients. [ABSTRACT FROM AUTHOR]

In order to target celecoxib which is a COX2 inhibitor, with potentials in the prevention and treatment of colitis and colon cancer, it was formulated as microparticles using the solvent/evaporation method and various pH-dependent Eudragit polymers. Thein-vitroevaluation of the prepared microparticles showed spherical and smooth morphology. The encapsulation efficiency and yield were high, indicating that the method used is simple and efficient at this scale. Thein-vitrorelease study showed no release in the acidic medium for 2 h followed by the release of the drug in pH 6.8 in case of Eudragit L100-55 and L100 and pH 7.4 in case of Eudragit S100. The pharmacokinetic parameters were calculated and method validation was performed to insure that it is suitable and reliable. Pharmacokinetic parameters were investigated by determining the Cmax, Tmax, AUC0–t, Kel, and t1/2of the drug as a suspension and as microparticles. There was a significant difference (p < 0.05) in Tmaxbetween the drug as a suspension and as microparticles. The effect of celecoxib on the degree of inflammation was examined on acetic acid induced colitis rat model and the drug was given as a suspension and as microparticles. The evaluation was done using macroscopical, microscopical and biochemical examination. There was a significant difference between the acetic acid control group and the treatment groups regarding all examination criteria in the order microparticles formulated using Eudragit S100 followed by Eudragit L100-55 while microparticles using Eudragit L100 and drug suspension showed almost the same results. [ABSTRACT FROM AUTHOR]

Context: Metformin hydrochloride is a biguanide derivative widely used for the treatment of type 2 diabetes, prescribed nearly to 120 million people worldwide. Metformin has a relatively low oral bioavailability (about 50–60%). Although the major effect of metformin is to decrease hepatic glucose output as an antihyperglycemic agent, its inhibitory effects on the proliferation of some cancer cells (e.g. prostate, breast, glioma cells) have been demonstrated in the cell culture studies. Development of novel formulation (e.g. microparticles, nanoparticles) strategies for metformin might be useful to improve its bioavailability, to reduce the dosing frequency, to decrease gastrointestinal side effects and toxicity and to be helpful for effective use of metformin in cancer treatment. Objective: The main aim of this review is to summarize metformin HCl-loaded micro- and nanoparticulate drug delivery systems. Method: The literature was rewieved with regard to the physicochemical, pharmacological properties of metformin, and also its mechanism of action in type 2 diabetes and cancer. In addition, micro- and nanoparticulate drug delivery systems developed for metformin were gathered from the literature and the results were discussed. Conclusion: Metformin is an oral antihyperglycemic agent and also has potential antitumorigenic effects. The repeated applications of high doses of metformin (as immediate release formulations) are needed for an effective treatment due to its low oral bioavailability and short biological half-life. Drug delivery systems are very useful systems to overcome the difficulties associated with conventional dosage forms of metformin and also for its effective use in cancer treatment. [ABSTRACT FROM PUBLISHER]

Low molecular weight heparins (LMWHs), the anticoagulant drug of choice in many indications, had been suggested as novel drug treatment for a range of diseases. Their superior pharmacokinetic properties compared to unfractionated heparin (UFH), motivated scientists to explore new delivery systems for improved therapeutic outcomes. Micro- and nano-carriers, with the versatile nature and characteristics of materials used for their fabrication, are able to surmount the challenges opposed by their native structures. The present review discusses the recent perspectives on the development of micro- and nano-particulate vectors for the delivery of LMWHs through various routes. Special focus on the application of the suggested systems, their characterization and the achieved improved bioavailability will be given throughout the review. [ABSTRACT FROM PUBLISHER]

The colon is a promising target for drug delivery owing to its long transit time of up to 78 h, which is likely to increase the time available for drug absorption. Progesterone has a short elimination half-life and undergoes extensive first-pass metabolism, which results in very low oral bioavailability (∼25%). To overcome these shortcomings, we developed an oral multiparticulate system for the colonic delivery of progesterone. Zn-pectinate/chitosan microparticles were prepared by ionotropic gelation and characterized for their size, shape, weight, drug entrapment efficiency, mucoadhesion and swelling behavior. The effect of cross-linking pH, cross-linking time and chitosan concentration on progesterone release were also studied. Spherical microparticles having a diameter of 580–720 µm were obtained. Drug entrapment efficiency of ∼75–100% was obtained depending on the microparticle composition. Microparticle mucoadhesive properties were dependent on the pectin concentration, as well as the cross-linking pH. Progesterone release in simulated gastric fluids was minimal (3–9%), followed by burst release at pH 6.8 and a sustained phase at pH 7.4. Thein vivostudy revealed that the microparticles significantly increased progesterone residence time in the plasma and increased its relative bioavailability to ∼168%, compared to the drug alone. This study confirms the potential of Zn-pectinate/chitosan microparticles as a colon-specific drug delivery system able to enhance the oral bioavailability of progesterone or similar drugs. [ABSTRACT FROM AUTHOR]

Microneedles (MNs) have been shown to enhance the penetration depths of microparticles delivered by gene gun. This study aims to investigate the penetration of model microparticle materials, namely, tungsten (<1 μm diameter) and stainless steel (18 and 30 μm diameters) into a skin mimicking agarose gel to determine the effects of particle characteristics (mainly particle size). A number of experiments have been processed to analyze the passage percentage and the penetration depth of these microparticles in relation to the operating pressures and MN lengths. A comparison between the stainless steel and tungsten microparticles has been discussed, e.g. passage percentage, penetration depth. The passage percentage of tungsten microparticles is found to be less than the stainless steel. It is worth mentioning that the tungsten microparticles present unfavourable results which show that they cannot penetrate into the skin mimicking agarose gel without the help of MN due to insufficient momentum due to the smaller particle size. This condition does not occur for stainless steel microparticles. In order to further understand the penetration of the microparticles, a mathematical model has been built based on the experimental set up. The penetration depth of the microparticles is analyzed in relation to the size, operating pressure and MN length for conditions that cannot be obtained in the experiments. In addition, the penetration depth difference between stainless steel and tungsten microparticles is studied using the developed model to further understand the effect of an increased particle density and size on the penetration depth. [ABSTRACT FROM AUTHOR]

Ulcerative colitis (UC) is a chronic disease, which can result the inflammation of the rectum, mucosa of the colon, and submucosa. The active component such as polypeptide in Periplaneta americana , which is one of the most common insects in the nature, can be extracted to treat UC. However, the active components in Periplaneta americana extract (PAE) can be degraded in the stomach due to its extreme acidic environment and enzyme. In this study, we developed a pH-dependent drug delivery method using polymer cellulose acetate (Eudragit S100) as a carrier to deliver high concentration PAE to inflamed colon. Both in vitro and in vivo results showed the PAE-Eudragit-S100 could treat UC through delivering active drug components to colon without degradation.

The study was aimed at the evaluation of N-vinyl pyrrolidone (NVP) incorporated polymethacrylic acid-chitosan microparticles for oral drug delivery applications. Poly (methacrylic acid)-chitosan (PMC) and poly(methacrylic acid-vinyl pyrrolidone)-chitosan (PMVC) microparticles were prepared by an ionic-gelation method. Mucoadhesion behaviour of these particles was evaluated by ex-vivo adhesion method using freshly excised rat intestinal tissue. Cytotoxicity and absorption enhancing property of PMC and PMVC particles were evaluated on Caco 2 cell monolayers. Protease enzyme inhibition capability and insulin loading/release properties of these hydrogel particles was evaluated under in vitro experimental conditions. Addition of NVP units enhanced the mucoadhesion behavior of PMC particles on isolated rat intestinal tissue. Both PMC and PMVC particles were found non-toxic on Caco 2 cell monolayers and PMC particles was more effective in improving paracellular transport of fluorescent dextran across Caco 2 cell monolayers as compared to PMVC particles. However, protease inhibition efficacy of PMC particles was not significantly affected with NVP addition. NVP incorporation improved the insulin release properties of PMC microparticles at acidic pH. Hydrophilic modification seems to be an interesting approach in improving mucoadhesion capability of PMC microparticles. [ABSTRACT FROM AUTHOR]

Polysaccharide microparticles for the oral administration of gentamicin were designed in order to obtain an increased drug absorption by means of microparticle transport across the intestinal epithelia. Alginate/chitosan microparticles with a size of ∼ 2 μm were developed by spray-drying a water solution containing the drug complexed with the polyanionic alginate and subsequent alginate cross-linking process by calcium ions and chitosan. The pre-formulation study, performed by changing the concentration of both cross-linkers, led to the selection of the most suitable formulation which was assayed for its capacity to be translocated across intestinal epithelia, via both M cells contained in Follicle Associated Epithelium (FAE) of Peyer's patches and enterocytes of the mucosal epithelium. An ex vivo perfusion technique of rabbit and rat intestinal tissues containing Peyer's patches combined with an in vitro method by using Caco-2 cell monolayers demonstrated the microparticulate carrier ability to be taken up by both M cells and enterocytes. However, only the endocytosis by M cells appeared to provide the microparticle transport from the epithelium toward deeper sub-epithelial regions. [ABSTRACT FROM AUTHOR]

The aim of this work was to test, evaluate, and compare the immunogenicity of the S3 malarial short synthetic model peptide in Balb/c mice when it was delivered with different adjuvants. Specifically, it studied the adjuvanticity of two different particulate delivery systems, human compatible Montanide® ISA 720 w/o emulsion and poly-lactide-co-glycolide acid microparticles, in terms of the enhancement and sub-set type of the immune response elicited following immunization. Aditionally, conventional aluminum hydroxide gel adjuvant was included as a reference. Aluminum adjuvant failed to improve the lack of immunogenicity of this antigenic peptide on its own. On the other hand, Montanide and microparticles given subcutaneously resulted in effective adjuvants and revealed mixed Th1/Th2 immune responses, with moderate antibody and lymphoproliferative responses, and higher IFN- γ secretion for Montanide. Hence, microparticles administered intradermally (not possible with Montanide) elicited superior and potent antibody levels, including higher cytophilic isotype (IgG2a), and the greatest limphoproliferation and IFN- γ levels. The results here presented support the capability and suitability of microparticle delivery systems to reach the adequate adjuvanticity necessary for future malaria vaccine development. [ABSTRACT FROM AUTHOR]

Sodium alendronate is an effective treatment for osteoporosis, but its oral administration is associated with adverse gastrointestinal effects. The aim of this work was to evaluate gastroresistant sodium alendronate-loaded microparticles prepared by spray-drying using Eudragit® S100 or a blend of Eudragit® S100/Methocel® E4M. Both formulations presented high encapsulation efficiencies, mean diameters below 17 μm, and similar collapsed shape. Dissolution experiments showed good gastro-resistance for the microparticles at pH 1.2. At pH 6.8, the blended microparticles retarded the drug release. In vivo studies showed that the formulations were able to protect the rat stomachs against ulcer formation by sodium alendronate. In conclusion, the microparticles seems to be promising oral carriers for sodium alendronate. [ABSTRACT FROM AUTHOR]

Here we describe the application of microparticles (MPs) for the delivery and release of the drug a benzopsoralen. We also evaluated the intracellular distribution and cellular uptake of the drug by using an encapsulation technique for therapeutic optimization. MPs containing the compound 3-ethoxycarbonyl-2H-benzofuro[3,2-f]-1-benzopyran-2-one (psoralen A) were prepared by the solvent evaporation technique, and parameters such as particle size, drug encapsulation efficiency, effect of the encapsulation process on the drug's photochemistry, zeta potential, external morphology, and in vitro release behavior were evaluated. The intracellular distribution of MPs as well as their uptake by tissues were monitored. Size distribution studies using dynamic ligh scattering and scanning electron microscopy revealed that the MPs are spherical in shape with a diameter of 1.4 μ m. They present low tendency toward aggregation, as confirmed by their zeta potential (+10.6 mV). The loading efficiency obtained was 75%. As a consequence of the extremely low diffusivity of the drug in aqueous medium, the drug release profile of the MPs in saline phosphate buffer (pH 7.4) was much slower than that obtained in the biological environment. Among the population of peritoneal phagocytic cells, only macrophages were able to phagocytose poly-d,l-lactic-co-glycolic acid (PLGA) MP. The use of psoralen A in association with ultraviolet light (360 nm) revealed morphological characteristics of cell damage such as cytoplasmic vesiculation, mitochondria condensation, and swelling of both the granular endoplasmatic reticulum and the nuclear membrane. These results indicate that PLGA MP could be a promising delivery system for psoralen in connection with ultraviolet irradiation therapy (PUVA). [ABSTRACT FROM AUTHOR]

Gamma (γ)-irradiation is finding increasing use in the sterilization of pharmaceutical products. However, irradiation also might affect the performance of drug delivery systems. In this study, the influence of γ-irradiation on the characteristics of chitosan microparticles was investigated. The diclofenac sodium was incorporated into chitosan microparticles by spray-drying method. The chitosan microparticles (placebo and drug-loaded) were irradiated at doses of 5, 15, and 25 kGy using a 60 Co source. Later, the microparticles were characterized by Fourier transform infrared (FTIR) spectroscopy, electron paramagnetic resonance (EPR) spectroscopy, X-ray diffraction, differential scanning calorimetry, scanning electron microscopy, and atomic force microscopy. In addition, microparticles also were evaluated for their sizes, drug content, swelling, and drug release behavior. Encapsulation efficiency of irradiated and nonirradiated microparticles was essentially the same. Notably, surface roughness (rms) of placebo microparticles decreased significantly after γ-irradiation when compared with nonirradiated placebo microparticles. FTIR spectroscopy revealed that γ-irradiation of chitosan microparticles induced neither cross-linking nor formation of new group in the chitosan matrix. EPR spectroscopy results showed that the gamma rays induced only one kind of free radical in the chitosan matrix. Size, crystallinity, and thermal properties of the chitosan microparticles did not change much after γ-irradiation. γ-irradiated microparticles, exhibited a slightly higher drug release rate and low swelling capacity than the nonirradiated microparticles. [ABSTRACT FROM AUTHOR]

The aim of this work was to encapsulate superoxide dismutase (SOD) into biodegradable microparticles by spray-drying technique. The nature of the organic solvent to dissolve the polymer, the method of incorporation of the drug in the organic phase (with or without a surfactant, namely sucrose ester of HLB = 6), the surfactant/polymer ratio, and the nature of the biodegradable polyesters were investigated as formulation variables. The polyesters investigated as matrix were poly(ℇ-caprolactone) (PCL), poly(d, l, lactide-co-glycolide) (PLG-RG756), and poly(d, l-lactide) (PLA-R207) of respective molecular weight 78.2 kDa, 84.8 kDa, and 199.8 kDa. At surfactant/polymer ratio of 1/10, the SOD-retained enzymatic activities were higher (>95%) for PLG-RG756 and PLA-R207 but relatively lower for the PCL (∼85%) probably due to the PCL relatively higher hydrophobicity. The obtained microparticles exhibited average volume mean diameter of 4-10 μm, the smaller for PCL and the larger for PLG-RG756 polymeric matrix. The in vitro release profile showed that SOD was completely (100%) released from PLA-R207 in 48 hr and from PLG-RG756 and PCL within 72 hr. These results showed that spray-drying with incorporation of surfactant such as sucrose ester may efficiently encapsulate SOD into biodegradable microparticles. Such formulations may improve the bioavailability of SOD and similar biopharmaceuticals. [ABSTRACT FROM AUTHOR]

The aim of this work was to encapsulate superoxide dismutase (SOD) in poly(ε-caprolactone) (PCL) microparticles by reverse micelle solvent evaporation. The concentration of PCL, the hydrophile-lipophile balance (HLB), and concentration of the sucrose ester used as surfactant in the organic phase were investigated as formulation variables. Relatively higher encapsulation efficiency (∼48%) and retained enzymatic activity (>90%) were obtained with microparticle formulation made from the 20% (w/v) PCL and 0.05% (w/v) sucrose ester of HLB = 6. This formulation allowed the in vitro release of SOD for at least 72 hr. These results showed that reverse micelle solvent evaporation can be used to efficiently encapsulate SOD in PCL microparticles. Such formulations may improve the bioavailability of SOD. [ABSTRACT FROM AUTHOR]

Poly(lactide) (PLA) polymer particles entrapping immunoreactive tetanus toxoid (TT) were used for generation of immune response using single point immunization. Immunization with different sizes of polymer particles encapsulating immunoreactive TT elicited anti-TT antibody titers that persisted for more than 5 months. However, antibody response generated by single point immunization of either nanoparticles or microparticles were lower than the conventional two doses of alum adsorbed TT. To overcome this limitation, alum was used with particles that improved anti-TT antibody response. Immunization with nanoparticles along with alum resulted in very high and early immune response: high anti-TT antibody titers were detected as early as 15 days postimmunization. However anti-TT antibody titers declined rapidly with time. Immunization with admixture of microparticles and alum elicited higher antibody titers than the particles alone and the antibody titers were high particularly during the later part of the postimmunization period. Single point immunization with admixture of PLA microparticles and alum resulted in an antibody response very close to that achieved by two injection of alum-adsorbed TT. Physical mixture of both a nano- and microparticles along with alum resulted in sustained anti-TT antibody response from very early days of postimmunization until 150 days. The antibody titers were maintained around 50 µg/ml for more than 5 months. These results indicated that immune response from polymer particles can be further improved by use of additional adjuvant. Furthermore, using various size particles or physical mixture of different size particles along with alum, it is possible to modulate the kinetics of immune response using polymer particles based immunization. [ABSTRACT FROM AUTHOR]

Release of immunoreactive antigen from biodegradable polymer particles in a manner mimicking the normal vaccination schedule is one of the most important requirements for the successful development of single dose vaccine formulation. Tetanus toxoid (TT) was used as a model antigen to develop single dose vaccine formulations using poly(lactide-co-glycolide) and poly(lactide)polymers. An amphiphilic stabilizer such as RSA or PVA was used at an optimal concentration in the internal aqueous phase during preparation of immunoreactive TT particles using the multiple emulsion solvent evaporation method. Particles made from different polymers released immunoreactive TT continuously for more than 4 months in vitro and release profiles were in accordance with the degradation characteristics of the polymer. Initial burst release of antigen from the particles was controlled by incorporation of different concentrations of PVA in the internal aqueous phase during particle formulation. The extent of antigen release from the particles was varied by changing the aqueous to organic phase volume during the primary emulsification stage of particles formulation. Use of above formulation variables resulted in the formulation of polymer particles having different in vitro release characteristics. Anti-TT antibody titers in vivo were also in accordance with the in vitro release characteristics of immunoreactive TT from the particles. Anti-TT antibody titers from the stabilized particles were much better than that observed from particles made without stabilizers. These results indicate the importance of stabilizers and different formulation variables for the preparation of polymer particles having desired in vitro release characteristics. [ABSTRACT FROM AUTHOR]

The present work is aimed at investigating the release of Diclofenac (DCF) from Eudragit RS100T[sup ®] (RS) microparticles to a biological model membrane consisting of dimyristoylphosphatidylcholine (DMPC) multilamellar vesicles (MLV). The microparticles were prepared by the Quasi-Emulsion Solvent Diffusion method (QESD). The drug release was monitored by Differential Scanning Calorimetry (DSC) technique, following the effects exerted by DCF on the thermotropic behaviour of DMPC multilamellar vesicles at different temperatures. DCF affects the transition temperature (T[sub m]) of phospholipid vesicles, causing a m shift towards lower values, which is modulated by the drug fraction entering into the lipid bilayer. Calorimetric measurements were performed at two different pH (4.0 and 7.4) on suspensions of blank liposomes added to weighed amounts of unloaded and DCF-loaded microspheres, as well as to the powdered free drug, after incubation at 37°C. The T[sub m] shifts, caused by the drug released from the polymeric system or by the free drug during incubation cycles, were compared to those caused by a chosen molar fractions of the free drug dispersed directly in the membrane. This in vitro study suggests as the kinetic process involved in drug release is influenced by the amount of drug loaded in the microspheres as well as by the pH value, acting on drug solubility and membrane disorder. [ABSTRACT FROM AUTHOR]

Chitosan glutamate (gCS) spray-dried microparticles appear promising carriers to overcome challenges associated with vaginal microbicide delivery. This study aimed at elucidating the penetration and mucoadhesive behavior of developed gCS multiunit carriers with zidovudine (ZVD) as a model antiretroviral agent in contact with excised human vaginal epithelium followed with an examination of in vitro antiherpes activity in immortal human keratinocytes HaCaT and human vaginal epithelial cells VK2-E6/E7. Both ZVD dispersion and placebo microparticles served as controls. Microparticles displayed feasible (comparable to commercial vaginal product) mucoadhesive and mucoretention characteristics to isolated human vaginal tissue. Ex vivo penetration studies revealed that gCS increased the accumulation of active agent in the vaginal epithelium but surprisingly did not facilitate its penetration across human tissue. Finally, the obtained antiviral results demonstrated the potential of gCS as an antiherpes adjunctive, whose mode of action was related to blocking viral attachment.