Search

Background: The new frontiers of computer-based surgery, technology, and material advances, have allowed for customized 3D printed manufacturing to become widespread in guided bone regeneration (GBR) in oral implantology. The shape, structural, mechanical, and biological manufacturing characteristics achieved through 3D printing technologies allow for the customization of implant-prosthetic rehabilitations and GBR procedures according to patient-specific needs, reducing complications and surgery time. Therefore, the present narrative review aims to elucidate the 3D-printing digital radiographic process, materials, indications, 3D printed manufacturing-controlled characteristics, histological findings, complications, patient-reported outcomes, and short- and long-term clinical considerations of customized 3D printed mesh, membranes, bone substitutes, and dental implants applied to GBR in oral implantology. Methods: An electronic search was performed through MEDLINE/PubMed, Scopus, BioMed Central, and Web of Science until 30 June 2024. Results: Three-dimensionally printed titanium meshes and bone substitutes registered successful outcomes in vertical/horizontal bone defect regeneration. Three-dimensionally printed polymeric membranes could link the advantages of conventional resorbable and non-resorbable membranes. Few data on customized 3D printed dental implants and abutments are available, but in vitro and animal studies have shown new promising designs that could improve their mechanical properties and tribocorrosion-associated complications. Conclusions: While 3D printing technology has demonstrated potential in GBR, additional human studies are needed to evaluate the short- and long-term follow-up of peri-implant bone levels and volumes following prosthetic functional loading.

Background: the purpose of this systematic review was to assess the clinical and radiographic effect of subgingival-administered statins as an adjunct periodontal treatment in patients with periodontitis. Methods: Electronic literature searches in Medline/PubMed and the Cochrane Library were conducted to identify all relevant articles. Eligibility was based on inclusion criteria which included Randomized Controlled Trials (RCTs) published after 2010, where the periodontal variables were assessed before and after periodontal treatment in combination with a statin administration. The risk of bias was assessed with the ROBINS-2 tool. The outcome variables were probing depth, clinical attachment level, bleeding on probing, and bone fill in systematically healthy patients, patients with type 2 diabetes, and smokers. Results: Out of 119 potentially eligible articles, 18 randomized controlled trials were included with a total of 1171 participants. The data retrieved from the meta-analysis showed the positive effect that statins have as an adjunctive periodontal disease treatment. When comparing the different types of statins, the PD reduction in the Simvastatin group was significantly higher than the Atorvastatin group at 6 months and at 9 months, while no differences between statins were found for the rest of the outcomes. Over 66% of the articles presented an overall risk of bias with some concerns, making this a limitation of this present RCT. Conclusions: The adjunct administration of statins has proven to have a positive effect on the periodontium by improving both clinical and radiographic parameters by a considerable margin.

Background: The new frontiers of computer-based surgery, technology, and material advances, have allowed for customized 3D printed manufacturing to become widespread in guided bone regeneration (GBR) in oral implantology. The shape, structural, mechanical, and biological manufacturing characteristics achieved through 3D printing technologies allow for the customization of implant-prosthetic rehabilitations and GBR procedures according to patient-specific needs, reducing complications and surgery time. Therefore, the present narrative review aims to elucidate the 3D-printing digital radiographic process, materials, indications, 3D printed manufacturing-controlled characteristics, histological findings, complications, patient-reported outcomes, and short- and long-term clinical considerations of customized 3D printed mesh, membranes, bone substitutes, and dental implants applied to GBR in oral implantology. Methods: An electronic search was performed through MEDLINE/PubMed, Scopus, BioMed Central, and Web of Science until 30 June 2024. Results: Three-dimensionally printed titanium meshes and bone substitutes registered successful outcomes in vertical/horizontal bone defect regeneration. Three-dimensionally printed polymeric membranes could link the advantages of conventional resorbable and non-resorbable membranes. Few data on customized 3D printed dental implants and abutments are available, but in vitro and animal studies have shown new promising designs that could improve their mechanical properties and tribocorrosion-associated complications. Conclusions: While 3D printing technology has demonstrated potential in GBR, additional human studies are needed to evaluate the short- and long-term follow-up of peri-implant bone levels and volumes following prosthetic functional loading. [ABSTRACT FROM AUTHOR]

Introduction: The present study aimed to investigate the effectiveness of low-level laser therapy (LLLT) use before in-office bleaching to prevent an increase in the risk and intensity of tooth sensitivity. Methods: Thirty patients were selected. Before bleaching with 38% hydrogen peroxide, the participants were randomly divided into two groups of 15 subjects. Test group: the patients’ teeth were subjected to a preliminary LLLT procedure by an 810 nm diode laser with 0.5 W for 30 s for an energy density of 15 J/cm2 and a group placebo. All patients were instructed to report their cold sensitivity experiences immediately, 1 h, 24 h, and 48 h after the end of bleaching via a VAS score. Results: The results obtained show an increase in VAS values for both groups (290 and 490 vs. 224 and 234 of baseline time of test and placebo group, respectively); afterward, the VAS value seemingly decreases at 1 h after the end of bleaching, approaching the baseline VAS for the test group (274) in comparison to the placebo group. Conclusions: The use of preliminary diode LLLT could represent a valid possibility to reduce the occurrence of tooth sensitivity post-whitening and shorten recovery time in cases where tooth sensitivity occurs.

This study evaluates salivary immunoglobulin A (s-IgA) and interleukin 6 (IL-6) in saliva of children and its correlation to tooth decay severity. Fifty-nine patients were divided into two groups: caries free (A group) and caries active (B group). B group was investigated according to Mount and Monse indices. Mean salivary IgA rate between two groups (A 16.7 ± 4.5 mg/dL vs. B 21.8 ± 12.9 mg/dL) was not significant, while IL-6 rate (A 19.02 ± 5.3 pg/mL vs. B 30.2 ± 11.8 pg/mL) was statistically different. This study revealed that salivary IL-6 levels were significantly higher in children with active caries when compared with the caries-free group, while the s-IgA rate showed no significant differences between the two groups. [ABSTRACT FROM AUTHOR]

The aim of this study was to evaluate the correlation between marginal gingivitis, oral hygiene parameters, and interleukin-6 (IL-6) levels in gingival crevicular fluid of 40 children. The marginal periodontal pathology was evaluated by gingival index (GI). The status of oral hygiene was estimated by using patient hygiene performance (PHP), brushing frequency (BF), and plaque index (PI). IL-6 levels in gingival crevicular fluid were measured to evaluate the inflammation in marginal gingiva. PHP score showed a significant correlation with GI, BF, and PI. The groups based on PHP ranges were significantly related to IL-6 concentration in crevicular fluid.

The aim of this case report was to evaluate the use of Partsch I cystotomy in order to preserve a dental implant located in an odontogenic cyst extended from 3.2 to 4.4. A 50 year-old woman showed a circular, well-defined unilocular radiolucent area, Ø2.5 cm, in the right mandibular region with an oral implant intruding inside it. The overdenture in the mandibular right site showed no clinical mobility. The authors decided to perform a surgical treatment aimed to preserve the implant. The patient underwent Partsch I surgery followed by iodoform gauze insertion replaced weekly for one month, revision of the previous orthograde endodontic treatments, and an acrylic resin obturator prosthesis application for the following two months. The twelve month follow-up showed no clinical mobility of the right lateral mandibular implant prostheses. Radiographical analysis revealed cystic lesion healing and perimplant bone regeneration. This report highlights the opportunity to apply cystotomy when the cyst involves a dental implant and undermines its stability. This possibility is offered by the peculiar clinical scenario where the implant was stabilized by the presence of a previous prosthetic fixation. Our study led to the application of an operative protocol that allowed for the preservation of the implant.

Background: Cone beam computed tomography (CBCT) is often used in different fields of dental science, especially in complex anatomical districts like the endodontic one. The aim of this study is to propose a low-dose CBCT protocol useful in cases of endodontic lesions. Methods: The device used was a MyRay Hyperion X9-11x5; the low dose setting of the machine was 90 Kv, 27 mAs, CTDI/Vol 2.89 mGy. The absorbed organ doses have been evaluated with an anthropomorphic phantom loaded with thermoluminescent dosimeters positioned at the level of sensitive organs like brain, bone marrow, salivary glands, thyroid, esophagus, oral mucosa, extrathoracic airways, and lymph nodes. Equivalent and effective doses have been calculated; the last one has been calculated using the recommendations approved by the Main Commission of ICRP (International Commission Radiological Protection) in March 2007. For the assessment of image quality, five senior clinicians, independent and experienced clinicians, were asked to state if CBCT scans were accurate enough to assess endodontic lesions. Results: The use of a low-dose CBCT acquisition produced the lowest organ dose (5.01 microSv) at the level of the esophagus. Image quality has been considered accurate enough for endodontic diagnostic needs. Conclusions: CBCT low-dose protocol can be used over the standard one in endodontic special cases because it provides a significantly lower radiation dose to the patients while ensuring good image quality. However, further studies are necessary to evaluate the opportunity of low-dose CBCT exams in endodontic clinical practice.

The aim of this study is to evaluate the color changes and the stability at a 1-year follow-up of white spot lesions (WSLs) treated with an infiltrating technique by using etching and TEGDMA resin. The color of 22 white spot lesions and the sound adjacent enamel (SAE) were assessed with a spectrophotometer at T0 (baseline), T1 (after treatment), and T2 (1 year after). The color change ΔE (WSLs-SAE) at T0 vs. T1 were compared to evaluate the camouflage effect efficiency, and at T1 vs. T2 to assess the stability of outcomes. To evaluate the effect on the treatment outcome of gender, the presence or not of previous orthodontic treatment, WSLs onset more/less than 10 years, the age of the patient, and the ΔE WSL (T0 vs. T1) was analyzed. The difference between ΔE (WSLs-SAE) at T0 and T1 resulted in statistical significance (p < 0.01). No statistical difference was found between ΔE (WSLs-SAE) at T1 vs. T2. The variables considered showed no statistical differences in treatment outcomes. The results of our investigation show that the technique used is immediately effective and the camouflage effect keeps up and steady one year after treatment. Such results do not appear to be influenced by analyzed clinical variables.

The need for extractions in orthodontic treatment has always been a controversial topic. However, to date there is not a specific clinical guideline that can help the clinicians deciding to plan an extractive or a non-extractive orthodontic treatment. In this respect, clinicians must deal with patients’ occlusal, functional, periodontal and aesthetics characteristics before planning an orthodontic treatment including extraction. Considering the absence of specific guidelines, the choice to extract teeth or not is complicated, particularly in borderline cases. In this case report, we present a borderline case of a patient with the skeletal Class III pattern and significant crowding in both arches that could be treated with or without extraction, illustrating the diagnostic and decision-making processes that were conducted for the orthodontic treatment strategy.

This study evaluates salivary immunoglobulin A (s-IgA) and interleukin 6 (IL-6) in saliva of children and its correlation to tooth decay severity. Fifty-nine patients were divided into two groups: caries free (A group) and caries active (B group). B group was investigated according to Mount and Monse indices. Mean salivary IgA rate between two groups (A 16.7 ± 4.5 mg/dL vs. B 21.8 ± 12.9 mg/dL) was not significant, while IL-6 rate (A 19.02 ± 5.3 pg/mL vs. B 30.2 ± 11.8 pg/mL) was statistically different. This study revealed that salivary IL-6 levels were significantly higher in children with active caries when compared with the caries-free group, while the s-IgA rate showed no significant differences between the two groups.