Search

Leukocyte esterase (LE) is a useful marker that can be used in establishing a diagnosis of urinary tract infections (UTIs). The development of a UTI diagnostic method with quantitative determinations of biomarkers across all age groups is becoming more important. In this report, microfluidic resistance sensors based on silver ink (Ag ink) and silver ink mixed with ZnO nanoparticles (Ag-ZnO ink) were synthesized and coated on cellulose paper, namely LE-Ag-μPADs and LE-Ag-ZnO-μPADs, respectively, for the sensitive detection of LE. The microfluidic design increases the precision of data and further allows for quantitative determination and early detection of LE in human urine. The quantification of LE relies on the change in the resistance readout coating with Ag ink as well as Ag-ZnO ink in the detection zone. A mixture of 3-(N-tosyl- L -alaninyloxy)-5-phenylpyrrole (PE) and 1-diazo-2-naphthol-4-sulfonic acid (DAS) was deposited in the sample zone to selectively recognize LE, and the resulting nonconductive products, i.e., azo compounds, further reacted with the Ag ink and Ag-ZnO ink to increase resistance. The quantitative detectable LE concentrations between 2 to 32 (×5.2 U mL−1), i.e. ≈12 to 108 μg L−1, cover the commercial dipstick range of trace, +1 and +2. The minimum detectable concentration of LE in urine was 1 (×5.2 U mL−1). The lower concentrations of LE detectable by LE-Ag-μPADs (1–8 × 5.2 U mL−1) are below the value achieved with the ELISA LE kit. Urine samples from inpatients with indwelling urinary catheters were used, and the LE levels measured by the present device were highly correlated with those determined by a commercial urine analyser. [ABSTRACT FROM AUTHOR]

A new microfluidic paper-based analytical device, a (Ag-μPAD)-based chemiresistor composed of silver ink, has been developed for the selective, sensitive, and quantitative determination of nitrite ions in environmental analysis. The silver ink acts as an efficient transducer in terms of resistance changes due to nitrite initiating a diazo reaction and further reacting with the ink. The silver ink is synthesized onto the μPADs by pulsed light sintering from silver nanoparticles, a mixture of silver nanowires and nanoparticles. The resistance changes show two linear response ranges to nitrite in the concentration ranges of 1.0 × 10−8 M to 5.0 × 10−6 M and 1.0 × 10−5 M to 3.2 × 10−3 M, with a limit of detection of 8.5 × 10−11 M (S/N = 3). The sensor displays a wider linear range, a lower detection limit, a higher stability, high selectivity, low-volume sampling, and disposability for nitrite with respect to other nanoparticle- and paper-based sensors. The characterization of silver ink was verified by SEM, EDS, and IR studies, and the sensing mechanism is discussed. In addition, this paper-based sensor has been successfully employed to determine the nitrite content in tap, river and lake water samples. [ABSTRACT FROM AUTHOR]

In this work, we present a facile preparation of a paper-based glucose assay for rapid, sensitive, and quantitative measurement of glucose in blood plasma and urine. Two copper phosphorescent complexes [Cu(2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline)(2,6-dimethylphenylisocyanide)2][B(C6H3(CF3)2)4] (Cu1) and [Cu(2,9-dimethyl-1,10-phenanthroline)(2,6-dimethylphenylisocyanide)2][B(C6H3(CF3)2)4] (Cu2) and a new silver congener [Ag(P3)CNAg(P3)][B(C6H3(CF3)2)4] (Ag3) (P3 = PPh2C6H4-PPh-C6H4PPh2 [bis(o-diphenylphosphinophenyl)phenylphosphine]) have been synthesized and their oxygen sensing abilities were investigated. The dimetallic phosphine-based Ag3 complex, having a high oxygen sensing ability, was employed as an efficient signal transducer in enzymatic reactions to recognize blood plasma glucose and urine glucose, which provided a wide linear response for a concentration range between 1.0 and 35 mM and a rapid response, with a limit of detection (LOD) of 0.09 mM for glucose. In practical application, this Ag3 paper-based device offers great analytical reliability and accuracy upon monitoring glucose concentrations in blood plasma. [ABSTRACT FROM AUTHOR]

In this work, we present a Ag@Au nanoprism-metal–organic framework-paper based glucose sensor for rapid, sensitive, single-use and quantitative glucose determination in human serum. To achieve painless measurement of glucose with a non-invasive detection methodology, this biosensor was further tested in human urine. In this approach, a new hybrid-Ag@Au nanoprism loaded in close proximity to micrometer sized coordination polymers as phosphorescent luminophores significantly enhanced the emission intensity due to metal-enhanced phosphorescence and worked as reaction sites to support more dissolved oxygen. Reports of enhanced phosphorescence intensity are relatively rare, especially at room temperature. The true enhancement factor of Ag@Au-phosphorescent metal–organic frameworks on paper was deduced to be 110-fold, making it a better optical type glucose meter. The results demonstrate the validity of the intensity enhancement effect of the excitation of the overlap of the emission band of a luminophore with the surface plasmon resonance band of Ag@Au nanoprisms. Ag@Au nanoprisms were used not only to improve the detection limit of glucose sensing but also to extend the glucose sensing range by enhancing the oxygen oxidation efficiency. The oxidation of glucose as glucose oxidase is accompanied by oxygen consumption, which increases the intensity of the phosphorescence emission. The turn-on type paper-based biosensor exhibits a rapid response (0.5 s), a low detection limit (0.038 mM), and a wide linear range (30 mM to 0.05 mM), as well as good anti-interference, long-term longevity and reproducibility. Finally, the biosensor was successfully applied to the determination of glucose in human serum and urine. [ABSTRACT FROM AUTHOR]