Search

This document is a contents list for the journal "Dalton Transactions: An International Journal of Inorganic Chemistry." It features a compilation of research papers covering various topics such as metal dioxo complexes, piezo-photocatalytic CO2 reduction, and carbonaceous materials for lithium-ion batteries. The journal aims to foster connections within the chemistry community and stimulate innovative ideas. Additionally, the document includes corrections to two previously published papers. [Extracted from the article]

The document is a contents list for the journal "Dalton Transactions: An International Journal of Inorganic Chemistry." It includes various articles and papers on topics such as copper complexes, lanthanide-based POMs, and coordination polymers. The journal is published by The Royal Society of Chemistry, a leading chemistry community. The document also mentions approved training courses offered by the society. The given document is a list of papers published in the journal Dalton Transactions. The papers cover a range of topics in chemistry, including catalysis, phosphors, materials synthesis, and more. Each paper is identified by its title, authors, and page number. The document also includes a correction and a retraction for two previously published papers. [Extracted from the article]

In this paper, we report a two-dimensional (2D) Hofmann-type spin-crossover coordination polymer [FeII(o-NTrz)2PtII(CN)4]·H2O (o-NTrz = 4-(o-nitrobenzyl)imino-1,2,4-triazole). Due to the remarkable configurational flexibility of triazole-based ligand, the porous structure of this compound can be reversibly regulated by the loss of guest water molecules as a consequence of rotation of o-NTrz. The 180° reorientation of the o-nitrobenzyl moiety not only induces a response of gate-closing/opening of the porous framework but also significantly modulates the spin transition temperature. The present investigation highlights the potential of Hofmann-type SCO compounds with flexible ligands in exploring unusual physical and chemical phenomena. [ABSTRACT FROM AUTHOR]

Polar cyano fragments and their isomeric isocyano counterparts have attracted great attention as stimuli-responsive luminescent materials in a wide range of fields including organic light-emitting diode devices, chemical fluorescent sensors, photoelectric semiconductors, anti-counterfeit products, etc., mainly because of their typical electron-deficient activity, noncovalent recognition ability, and variable coordination capacity. The electron-deficient and polar nature of these blocks have significant effects on the properties of the cyano/isocyano-based luminophore materials, especially concerning their condensed state-dependent electronic structures. Among them, donor–acceptor (D–A) derived unimolecular and co-assembled luminophores have attracted more attention because their large delocalized structures and noncovalent interaction recognition sites can rebuild the electronic transfer character in the aggregative state, thus endowing them with outstanding stimuli-responsive luminescent behavior via intermolecular and intramolecular charge transfer in polytropic morphologies. In this perspective paper, we give a brief introduction on stimuli-responsive organic and coordinated luminophores and the documented typical design concepts and applications in recent years. It is expected that this perspective article will not only summarize the recent developments of polar cyano/isocyano-derived luminophores and their coordination compounds via structural tailoring and self-assembly but also throw light on the future of the design of more sophisticated stimuli-responsive architectures and their versatile properties. [ABSTRACT FROM AUTHOR]

Developing high performance noble-metal-free electrocatalysts as an alternative to Pt-based catalysts for the oxygen reduction reaction (ORR) in energy conversion devices is highly desirable. We report herein the preparation of a coordination-polymer (CP)-derived Fe/CP/C composite as an electrocatalyst for the ORR with excellent activity and stability both in solution and in Zn-air batteries. The Fe/CP/C catalyst was obtained from the pyrolysis of an iron porphyrin Fe(TPP)Cl (5,10,15,20-tetraphenyl-21H, 23H-porphyrin iron(III) chloride) grafted Zn-coordination polymer with dangling functional groups 4,4'-oxybisbenzoic acid and 4,4'-bipyridine ligands. The Fe/CP/C catalyst showed much higher ORR activity with a half-wave potential (E1/2) of 0.90 V (vs. RHE) than the Fe/C catalyst (E1/2 = 0.85 V) derived from the carbon-blacksupported Fe porphyrins in 0.1 M KOH solution. When Fe/CP/C was used as the cathode electrocatalyst in Zn-air batteries (ZABs), the ZABs achieved a significantly higher open circuit voltage (OCV = 1.43 V) and maximum power density (Pmax = 142.8 mW cm-2) compared with Fe/C (OCV = 1.38 V, Pmax = 104.5 mW cm-2) and commercial 20 wt% Pt/C (OCV = 1.41 V, Pmax = 117.6 mW cm-2). Using dangling functional groups in CP to increase the loading efficiency of iron porphyrins offered a facile method to prepare high-performance noble-metal-free electrocatalysts for the ORR, which may provide promising applications to energy conversion devices. [ABSTRACT FROM AUTHOR]

A series of two-dimensional (2D) spin-crossover coordination polymers (SCO-CPs) [FeII(TPE)(NCX)2]·solv (1: X = BH3, solv = H2O·2CH3OH·DMF; 2: X = Se, solv = H2O·2CH3OH·0.5DMF; 3: X = S, solv = H2O·2CH3OH·0.5DMF) were synthesized by employing 1,1,2,2-tetra(pyridin-4-yl)ethene (TPE) and pseudohalide (NCX-) coligands. Magnetic measurements indicated that complexes 1-3 exhibited SCO behaviors with diminishing thermal hysteresis (7/4/0 K) upon decreasing the ligand-field strength. The critical temperatures (Tc) during spin transition were found to be inversely proportional to the coordination ability parameters (a™) with a linear correlation. The guest effect was also investigated in the solvent-exchanged phases 1-SE/2-SE/3-SE wherein the DMF molecules were replaced by methanol molecules. Compared with 1-3, 1-SE/2-SE/3-SE displayed more abrupt and complete single-step SCO behaviors but narrower thermal hysteretic loops. The results reported here demonstrate that the Tc values of these two families were dominated by the ligand-field strength of the NCX- anions (NCBH3 > NCSe > NCS), whereas the guest effect only modulated the kinetic factor of the SCO nature in this system. [ABSTRACT FROM AUTHOR]

A novel series of one-dimensional coordination polymers (CPs) is achieved via a facile one-pot synthesis strategy employing the nitrate salts of trivalent lanthanides, a pentadentate chelating ligand, and triphenylphosphine oxide at a controlled stoichiometry under ambient conditions. All the CPs are characterized comprehensively using spectroscopic, X-ray crystallographic and magnetometric studies. The CPs are found to be thermally stable up to a significantly high temperature and resistant to water for an indefinite time. They are photoactive and exhibit selective fluoride ion (F-) sensing with excellent efficiency both colorimetrically and fluorimetrically in the solid-state as well as in solution. The presence of F- concomitantly sensitizes the photoluminescence enhancement and visual decolourization of the CPs in solution owing to the ground-state intra-molecular proton transfer. The photophysical response of the CPs to F- in solution was found to be instantaneous (<30 s). The sensitivity of detection is observed to be significantly high over a wide range of F- concentrations, covering the beneficial and detrimental domains of F- concentrations in drinking water. The limit of detection (LoD) under ambient conditions was found to be in the micromolar (µM) range--the best being 0.22 µM found using UV-vis spectrometry and 7.5 µM using fluorimetry. In comparison, the USEPA standard cut-off for the upper limit of F- concentration in drinking water is 211 µM, and the LoD of measuring F- concentration using the USEPA standard method using a fluoride-selective electrode is 26.3 µM. The CPs display markedly high selectivity toward F- with negligible-to-no interference from the commonly abundant ions (Cl-, Br-, I-, CH3CO2-, CO32-, SO42-,HPO42-, NH4+, Na+, K+, Mg2+, and Ca2+) in terms of UV-vis spectral change. Moreover, they also exhibit solid-state IR-spectrometric sensitivity towards F- under ambient conditions. [ABSTRACT FROM AUTHOR]

The construction of sulfur-incorporated cluster-based coordination polymers was limited and underexplored due to the lack of efficient synthetic routes. Herein, we report facile mechanochemical ways toward a new series of SFe3(CO)9-based dipyridyl-Cu polymers by three-component reactions of [Et4N]2[SFe3(CO)9] ([Et4N]2[1]) and [Cu(MeCN)4][BF4] with conjugated or conjugation-interrupted dipyridyl ligands, 1,2-bis(4-pyridyl)ethylene (bpee), 1,2-bis(4-pyridyl)ethane (bpea), 4,4'-dipyridyl (dpy), or 1,3-bis (4-pyridyl)propane (bpp), respectively. X-ray analysis showed that bpee-containing 2D polymers demonstrated unique SFe3(CO)9 cluster-armed and cluster-one-armed coordination modes via the hypervalent µ5-S atom. These S-Fe-Cu polymers could undergo flexible structural transformations with the change of cluster bonding modes by grinding with stoichiometric amounts of dipyridyls or 1/[Cu(MeCN)4]+. They exhibited semiconducting behaviors with low energy gaps of 1.55-1.79 eV and good electrical conductivities of 3.26 × 10-8-1.48 × 10-6 S cm-1, tuned by the SFe3(CO)9 cluster bonding modes accompanied by secondary interactions in the solid state. The electron transport efficiency of these polymers was further elucidated by solidstate packing, X-ray photoelectron spectroscopy (XPS), X-ray absorption near-edge spectroscopy (XANES), density of states (DOS), and crystal orbital Hamilton population (COHP) analysis. Finally, the solid-state electrochemistry of these polymers demonstrated redox-active behaviors with cathodically-shifted patterns compared to that of [Et4N]2[1], showing that their efficient electron communication was effectively enhanced by introducing 1 and dipyridyls as hybrid ligands into Cu+-containing networks. [ABSTRACT FROM AUTHOR]

Reactions between 1,2-di(tetrazol-2-yl)ethane (ebtz), 1,6-di(tetrazol-2-yl)hexane (hbtz) or 1,1′-di(tetrazol-1-yl)methane (1ditz) and Fe(BF4)2 in the presence of adiponitrile (ADN), glutaronitrile (GLN) or suberonitrile (SUN) resulted in the formation of coordination polymers [Fe(μ-ebtz)2(μ-ADN)](BF4)2 (1), [Fe(μ-hbtz)2(μ-ADN)](BF4)2 (2), [Fe(μ-1ditz)2(GLN)2](BF4)2·GLN (3) and [Fe(μ-1ditz)2(μ-SUN)](BF4)2·SUN (4). It was established that the application of dinitriles allows an increase in the dimensionality of the ebtz and hbtz based systems while maintaining the structure of the polymeric units characteristic of previously studied mononitrile based analogues. In 3 and 4, regardless of the type of dinitrile coligand, the motif of 2D polymeric layers constituted by 1ditz molecules remains preserved. However, the dimensionality of 1ditz based networks is governed by the coordination modes of dinitriles. 3, based on a shorter molecule of glutaronitrile, crystallizes as a two-dimensional (2D) coordination polymer. In this compound, dinitriles coordinate monodentately or play the role of guest molecules. The substitution of glutaronitrile with suberonitrile enables the bridging of neighboring polymeric layers, resulting in a 3D network. The intentional selection of bis(tetrazoles) and dinitriles as building blocks has led, as expected, to obtaining systems with the structure of the first coordination sphere consisting of four tetrazole rings and two axially coordinated nitrile molecules. It created the conditions required for the occurrence of thermally induced spin crossover. Magnetic measurements and single crystal X-ray diffraction studies were used for the characterization of the spin crossover properties of 1–4. [ABSTRACT FROM AUTHOR]

Four salts of an anionic iron(III) bis-complex, [Fe(L L -thr)2]1−, were synthesized from water or methanol. H2L L -thr is a tridentate ligand derived from the L -threonine amino acid, and the cations used are Li+ (1), Na+ (2), K+ (3), and Ba2+ (4). Single-crystal X-ray diffraction showed that all the complexes are coordination polymers of different dimensionalities. The iron(III) complex binds to cations through its coordinated phenolate and non-coordinated carboxylate oxygen atoms. While Li+ forms a linear chain, all others have a pair of bridged cations intervening the iron(III) complexes. The 3D network of Ba2+ salt has a sizeable solvent-accessible space occupied by aquated chloride ions. The differences in circular dichroism (CD) spectra and significantly lower conductance values in water and methanol support partial retention of the polymeric nature in methanol. The visible spectra of 4 in methanol or water showed an ∼10 nm shift of the charge transfer bands from 3. However, the addition of Al3+ salt to 2 showed a significant colour shift. Further investigation confirmed that the colour shift is due to partial protonation of the complex with protons generated from salt hydrolysis. Most reports on visual aluminium detection consider aluminium's binding as the shift's source. The present results show that protonation due to hydrolysis of aluminium salt can skew the observation. [ABSTRACT FROM AUTHOR]

Herein, we report an efficient and straightforward approach for the synthesis of N-alkylated aminoquinoline derivatives by recyclable Cd-containing coordination polymer-catalyzed reactions of aminoquinolines with primary alcohols via the borrowing hydrogen strategy. In this work, a new type of coordination polymer [Cd(CIA)(phen)2(H2O)]n was successfully designed and fabricated. The molecular structure was corroborated by single-crystal X-ray diffraction and fully characterized by PXRD, FT-IR, TGA, and XPS. Importantly, this polymer revealed high catalytic activity for the N-alkylation reaction of 2-aminoquinoline and 8-aminoquinoline with inexpensive and low-toxicity alcohols as alkylating agents in excellent yields up to 95%. Interestingly, the present synthetic protocol was successfully applied for the gram-level synthesis of several biologically active compounds. In addition, several control reactions were carried out to investigate the possible mechanisms of this transformation. Finally, recycling experiments indicated that the cadmium coordination polymer showed good recovery performance for borrowing hydrogen reactions. [ABSTRACT FROM AUTHOR]

The accurate and rapid detection of antibiotics and heavy-metal-based toxic oxo-anions in water media employing coordination polymers (CPs) as luminescent probes has attracted a lot of attention. Three new Cd(II)-based ternary CPs derived from first-presented L ligands, including [Cd(DCTP)(L)(OH)]n (1), [Cd(TBTA)(L)(OH)]n (2), and [Cd(NPHT)(L)(H2O)]n (3) (L = 2-((1H-imidazol-1-yl)methyl)-5,6-dimethyl-1H-benzo[d]imidazole, H2DCTP = 2,5-dichloroterephthalic acid, H2TBTA = tetrabromoterephthalic acid and H2NPHT = 3-nitrophthalic acid), were successfully assembled and characterized. 1 and 2 show 2D hcb layers, which can be further extended into a 3D supramolecular framework via classic hydrogen bonding interactions. 3 features a 1D double chain that ultimately spreads into a 2D network through weak hydrogen bonding interactions. With the advantages of high stability and excellent luminescent properties, the three CPs display high sensitivity, selectivity, and good anti-interference for the sensing of pefloxacin (PEF) and Cr2O72− ions (LOD values toward PEF: 3.82 × 10−7 mol L−1 for 1, 4.06 × 10−7 mol L−1 for 2, and 1.36 × 10−8 mol L−1 for 3, and toward Cr2O72− ions: 5.97 × 10−7 mol L−1 for 1, 5.87 × 10−7 mol L−1 for 2, and 8.21 × 10−8 mol L−1 for 3). These CPs are the first examples of bifunctional luminescent sensors to detect PEF and Cr2O72− in aqueous solutions. The luminescence quenching mechanisms are explored in detail. [ABSTRACT FROM AUTHOR]

The adjustment of crystal symmetry and intramolecular magnetic coupling is of great importance for the construction of high-performance single-molecule magnets. By using an aggregation-induced-emission-active pyridine-carbohydrazone-based Schiff base ligand and phosphine oxides, four dinuclear and one one-dimensional DyIII-based complexes, [Dy2(TPE-pc)2(Bu3PO)2Cl2]·2CH3CN·2H2O (1), [Dy2(TPE-pc)2(Cy3PO)2Cl2] (2), [Dy2(TPE-pc)2(MePA)2Cl2]·2CH3OH (3), [Dy2(TPE-pc)2(Ph3PO)2Cl2]2 (4) and [Dy2(TPE-pc)2(DPPO)Cl2]n (5) (H2TPE-pc = (E)-N′-(2-hydroxy-5-(1,2,2-triphenylvinyl)benzylidene)picolinohydrazide, MePA = N-phenyl-N′,N′′-bis(morpholinyl) phosphoric triamide, DPPO = piperazine-1,4-diylbis(diphenyl phosphine oxide)), were isolated. All complexes are made up of an enol oxygen-bridged Dy2 unit, where DyIII ions possess a pentagonal bipyramidal geometry with pseudo D5h symmetry. Magnetic measurements reveal that intramolecular DyIII–DyIII couplings are ferromagnetic and all complexes display a significant slow magnetic relaxation phenomenon below 30 K under a zero dc field. Ab initio calculations indicate that the anisotropic magnetic axes of all DyIII ions are approximately perpendicular to the higher-order symmetric axes in all complexes, and that DyIII–DyIII magnetic couplings along the magnetic axes effectively suppress the ground state quantum tunneling effect of magnetization and promote the occurrence of slow magnetic relaxation. Raman relaxation prevails in all complexes. In addition, the H2TPE-pc ligand shows an aggregation-induced emission (AIE) effect; however, all complexes exhibit an aggregation-caused quenching (ACQ) phenomenon. [ABSTRACT FROM AUTHOR]

The construction and investigation of dual-functional coordination polymers (CPs) with proton conduction and luminescence sensing is of great significance in clean energy and agricultural monitoring fields. In this work, an Mn-based coordination polymer (Mn-CP), namely, [Mn0.5(HL)] (H2L = HOOCC6H4C6H4CH2PO(OH)OCH3), was hydrothermally synthesized. Mn-CP has a one-dimensional (1D) chain structure, in which uncoordinated –COOH groups can serve as potential sites for fluorescence sensing. Moreover, Mn-CP shows good water and pH stabilities, offering the feasibility for proton conduction and sensing applications. Mn-CP displays comparatively high proton conductivity of 1.07 × 10−4 S cm−1 at 368 K and 95% relative humidity (RH), which is promising for proton conduction materials. Moreover, it can serve as a repeatable, highly selective, and visualized fluorescence sensor for detecting oxytetracycline (OTC). More importantly, Mn-CP reveals an amazing quantitative sensing of OTC in actual samples such as seawater, aquaculture freshwater, soil infiltration solutions, and tap water. This work proves the excellent application potential of dual-functional CPs in the field of clean energy and environmental protection, especially for the fluorescence detection of antibiotics in aquaculture systems. [ABSTRACT FROM AUTHOR]

Smart chromic materials reacting to physicochemical stimuli are widely applied in optical switches, smart windows, and chemical sensors. Currently, most materials only respond to a single stimulus, but those that respond to multiple external stimuli are still in the minority. Herein, we report a novel porous zinc tungstate@metaloxoviologen framework [Zn3(Bcbpy)6(H2O)2]-[ZnW12O40]·6H2O (ZnW12@MV, H2BcbpyCl2 = 1,1′-bis(3-carboxybenzyl)-4,4′-bipyridinium dichloride), which shows multiple stimulus-responsive properties due to a combination of different functional motifs, namely, viologen electron acceptors, luminescent zinc–oxygen-clusters, porous cationic frameworks, and ZnW12O406− electron donors. Generally, the large-sized polyoxometalate (POM) anions serving as structure-directing agents can easily direct the formation of the oligomeric metaloxoviologen cations, mainly because POMs may break down some linkages leaving larger spaces for themselves. The large ZnW12O406− anions in ZnW12@MV are encapsulated into three-dimensional (3D) metaloxoviologen frameworks built up from the linkages of trinuclear zinc–oxygen clusters and Bcbpy viologens, which offer the first example of a 3D metaloxoviologen framework induced by large-sized POM anions. ZnW12@MV shows a reversible chromic response to X-ray/UV and electricity via different stimulus-induced electron transfers between electron-rich POM anions and electron-deficient metaloxoviologen frameworks, whereas the coloration changes are ascribed to the formation of radical and mixed-valence colored state ZnW12O406− species. The photochromic behavior is accompanied by photoluminescence quenching. The discriminative response to different-sized amines is attributed to the formation of viologen radicals through host–guest electron transfer. These results indicate that the multi-stimulus response ZnW12@MV can be applied in electrochromic devices, inkless erasable printing, and the detection of amines. [ABSTRACT FROM AUTHOR]

An enlarged version of the ubiquitous tetrathiafulvalene-tetrabenzoic acid is described, with 4,4′-biphenyl moieties as spacers between the coordination moieties and the electroactive core. The obtained rectangular ligand has a 14 × 22 Å2 size and is combined with Zn(II) under solvothermal conditions to yield a coordination polymer endowed with large cavities of ca. 15 × 11 Å2/10 × 10 Å2. The topology of the material is discussed in detail using the Points of Extension and Metals (PE&M) or the Straight-rod (STR) representation, and the sqc1121 or tfo topological type of the structure is observed, respectively. Its stability towards solvent removal and electrical properties are discussed. The material does not present any permanent porosity upon desolvation according to nitrogen sorption measurements at 77 K. Nevertheless, a significant increase in conductivity is observed on compressed pellets of the material upon post-synthetic oxidation with iodine. Raman spectroscopy combined with density functional theory (DFT) calculations has been used to characterize the oxidation state of tetrakis(4-carboxylic acid biphenyl)tetrathiafulvalene for coordination polymers. [ABSTRACT FROM AUTHOR]

Chemically and thermally stable permanently porous coordination cages are appealing candidates for separations, catalysis, and as the porous component of new porous liquids. However, many of these applications have not turned to microporous cages as a result of their poor solubility and thermal or hydrolytic stability. Here we describe the design and modular synthesis of iron and cobalt cages where the carboxylate groups of the bridging ligands of well-known calixarene capped coordination cages have been replaced with more basic triazole units. The resultingly higher M–L bond strengths afford highly stable cages that are amenable to modular synthetic approaches and potential functionalization or modification. Owing to the robust nature of these cages, they are highly processable and are isolable in various physical states with tunable porosity depending on the solvation methods used. As the structural integrity of the cages is maintained upon high activation temperatures, apparent losses in porosity can be mediated by resolvation and crystallization or precipitation. [ABSTRACT FROM AUTHOR]

A three-dimensional terbium(III) coordination polymer of formula [Tb(bttb)0.5(2,5-pzdc)0.5]n (1) [H4bttb = 1,2,4,5-tetrakis(4′-carboxyphenyl)benzene and H2-2,5-pzdc = 2,5-pyrazinedicarboxylic acid] was obtained under hydrothermal conditions. The bttb4− tetraanion in 1 adopts the bridging and chelating–bridging pseudo-oxo coordination modes while the 2,5-pzdc2− dianion exhibits a rather unusual bis-bidentate bridging pseudo-oxo coordination mode, both ligands being responsible for the stiffness of the resulting 3D structure. Solid-state photoluminescent measurements illustrate that 1 exhibits remarkable green luminescence emission, the most intense band occurring in the region of 550 nm (5D4 → 7F5) with lifetimes at the millisecond scale. Thermometric performances of 1 reveal a maximum relative sensitivity (Sm) of 0.76% K−1 at 295 K (δT = 0.05 K), constituting a TbIII ratiometric solid luminescent thermometer over the physiological temperature range. Variable-temperature static (dc) magnetic susceptibility measurements for 1 in the temperature range 2.0–300 K show the expected behavior for the depopulation of the splitted mJ levels of the 7F7 ground state of the magnetically anisotropic terbium(III) ion plus a weak antiferromagnetic interaction through the carboxylate bridges. No significant out-of-phase magnetic susceptibility signals were observed for 1 in the temperature range 2.0–10.0 K, either in the absence or presence of a static dc magnetic field. [ABSTRACT FROM AUTHOR]

Valence tautomerism (VT) involves the stimulated reversible intramolecular electron transfer between a redox-active metal and ligand. Dinuclear cobalt complexes bridged by bis(dioxolene) ligands can undergo thermally-induced VT with access to {CoIII-cat-cat-CoIII}, {CoIII-cat-SQ-CoII} and {CoII-SQ-SQ-CoII} states (cat2− = catecholate, SQ˙− = semiquinonate, CoIII refers to low spin CoIII, CoII refers to high spin CoII). The resulting potential for two-step VT interconversions offers increased functionality over mononuclear examples. In this study, the bis(dioxolene) ligand 3,3′,4,4′-tetrahydroxy-5,5′-dimethoxy-benzaldazine (thMH4) was paired with Mentpa (tpa = tris(2-pyridylmethyl)amine, n = 0–3 corresponds to methylation at 6-position of the pyridine rings) to afford [{Co(Mentpa)}2(thM)](PF6)2 (1a, n = 0; 2a, n = 2; 3a, n = 3). Structural, magnetic susceptibility and spectroscopic data show that 1a and 3a remain in the temperature invariant {CoIII-cat-cat-CoIII} and {CoII-SQ-SQ-CoII} forms in the solid state, respectively. In contrast, 2a exhibits incomplete thermally-induced VT between these two tautomeric forms via the mixed {CoIII-cat-SQ-CoII} tautomer. In solution, room temperature electronic absorption spectra are consistent with the assignments from the solid-state, with VT observed only for 2a. From electrochemistry, the proximity of the two 1e−-processes for the thMn− ligand indicates weak electronic communication between the two dioxolene units, supporting the potential for a two-step VT interconversion in thMn− containing complexes. Comparison of the redox potentials of the Co and thMn− processes suggests that only 2a has these processes in sufficient proximity to afford the thermally-induced VT observed experimentally. Density functional theory calculations are consistent with the prerequisite energy ordering for a two-step transition for 2a, and temperature invariant {CoIII-cat-cat-CoIII} and {CoII-SQ-SQ-CoII} states for 1a and 3a, respectively. This work presents the third example, and the first formally conjugated example, of a bridging bis(dioxolene) ligand that can afford two-step VT in a Co complex, suggesting new possibilities towards applications based on multistep switching. [ABSTRACT FROM AUTHOR]

The development and utilization of coordination polymers (CPs) have drawn interest for potential applications in different fields. Detection of metal ions in efficient and selective manners is an important field of research. It paves the way to protect human health by balancing toxic metal ions and biologically active metal ions in the atmosphere. In this regard, a new one-dimensional (1D) 4-(1-naphthylvinyl)pyridine (4-nvp) based CP [Cd(NCS)2(4-nvp)2]n (1) was synthesized and characterized structurally by single-crystal X-ray diffraction. Interestingly, this 1D CP underwent supramolecular aggregation via π⋯π stacking interactions, which specifically generated an environment for a potent "turn on" response in the presence of trivalent cations (Fe3+, Al3+, and Cr3+) in the nanomolar range but remained silent in the presence of other metal ions. Density functional theory (DFT) computations and X-ray photoelectron spectroscopy (XPS) were performed to establish the sensing phenomena. Fascinatingly, utilizing the sensitivity of 1 in an aqueous medium, a hands-on portable cotton swab kit was developed for instant identification of these three important trivalent metal cations. [ABSTRACT FROM AUTHOR]

At present, the rational design and facile synthesis of highly active and low-cost photocatalysts are still facing great challenges. Herein, a series of Zn0.5Cd0.5S/NiS (x mol%) composite photocatalysts have been synthesized via a simple and mild one-pot hydrothermal method. Compared with pure Zn0.5Cd0.5S, the NiS-loaded samples exhibit enhanced photocatalytic hydrogen generation performance, in which the Zn0.5Cd0.5S/NiS-5% sample has the highest H2 production rate of 10 855 ± 461 μmol h−1 g−1 with a quantum yield of 11.82% at 365 nm, which is almost 6.3 times higher than that of pristine Zn0.5Cd0.5S. The high activity of the Zn0.5Cd0.5S/NiS nanosheets may be attributed to their distinct nanostructure, including a short transfer distance of photoinduced charge carriers, a large number of unsaturated surface atoms, and a large surface area. Moreover, the added NiS nanoparticles served as an effective cocatalyst to promote photoinduced electron transfer and enhance the surface kinetics of H2 evolution. Our work provides a simple and effective route for the preparation of sulphur-based photocatalysts, which can significantly improve the efficiency of hydrogen production from water. [ABSTRACT FROM AUTHOR]

The inhibitory action of Schiff base complexes of 3d metals against the urease enzyme is well explored in the scientific community. However, the ability of such complexes in mimicking active metallobiosites of urease enzymes, possessing ureolytic behavior, still remains unexplored. With this aim firstly, two Zn(II)-complexes (PPR-HMB-Zn and PZ-HMB-Zn) have been developed from two different Schiff base ligands (HL1 = 2-((E)-(2-(piperidin-1-yl)ethylimino)methyl)-5-methylphenol and HL2 = 2-((E)-(2-(piperizin-1-yl)ethylimino)methyl)-5-methylphenol) and structurally characterized using single crystal XRD. The hydrolytic enzymatic activity of both complexes was demonstrated by the gradual increase in the absorption maxima at 425 nm for the formation of the p-nitrophenolate ion from catalytic hydrolysis mediated by the Zn(II) complexes with a disodium salt of p-nitrophenyl phosphate as a model substrate. Associated kinetic parameters, pH dependency and a relevant hydrolysis mechanism have also been explored. After confirming the hydrolytic ability, the complexes were exploited to mimic the hydrolytic activity of Jack bean urease that catalytically hydrolyses urea into ammonia and CO2. The change in the pH of the solution owing to the formation of ammonia under the complex catalysed hydrolytic action of urea has been monitored spectrophotometrically using the pH dependent structural change of phenol red. The amount of ammonia has been quantified using the Nessler's reagent spectrophotometric method. The ureolytic reaction mechanism has been investigated using density functional theory (DFT) calculations using the B3LYP and TPSSH methods for the systematic calculation of the interaction energy. In contrast to PZ-HMB-Zn, PPR-HMB-Zn functions more effectively as a catalyst due to the existence of a lattice-occluded water molecule in its crystal structure and the protonation of the non-terminal N to attract urea by H-bonding, which was further confirmed by AIM analysis. [ABSTRACT FROM AUTHOR]

Iron(II)-triazole coordination polymers have attracted considerable interest for their synthetic versatility, which allows tuning their spin-crossover (SCO) properties. Embedding SCO solid particles in sponge matrices is a simple, powerful, and generic approach to construct processable SCO materials. Here, we have studied a series of magnetic frameworks based on partial ligand substitution by using different chemical mixtures of two organic ligands, yielding four isostructural coordination polymers. The integration of the hygroscopic SCO material has endowed the composite sponge with the ability to capture moisture under ambient conditions. In particular, not only does a spin-crossover transition during absorption occur, but also a color variation has been achieved by varying humidity. The consequences of cooperativity and the exposed surface of the composite sponge on the spin transition were evaluated and the most promising materials among them were screened. This work provides guiding significance for the fabrication and practical application of spin-crossover-sponge materials. [ABSTRACT FROM AUTHOR]

Developing novel high-efficiency supercapacitors as energy storage devices to solve the energy crisis is of vital significance. Meanwhile, designing highly active and selective oxidation catalysts for various sulfides is desirable but still a big challenge. To work out these problems, three novel 3D POM-based coordination polymers (POMCPs), formulated as [{Ag6(pytz)4}{SiMo12O40}] (1), [{Cu3(pytz)4}{SiMo12O40}]·5.5H2O (2) and [{Cu6(pytz)6}{SiMo12O40}]·2H2O (3) (pytz = 4-(5-(4-pyridyl)-1H-tetrazole)), are successfully prepared via a one-step synthetic strategy by changing different temperatures under hydrothermal or solvothermal conditions. In compounds 1 and 2, {SiMo12}, as 9-capped and 2-capped polyoxoanions, are engaged among the 2D Ag/Cu-organic sheets to generate the novel 3D POM-based coordination polymers. In addition, 1D Cu-organic chains are combined with 3-capped {SiMo12} polyoxoanions to construct 2D POM-based coordination polymers in 3. To our delight, as electrode materials for supercapacitors, the three compounds exhibit excellent specific capacitances of 261.76 F g−1, 248.82 F g−1 and 156.47 F g−1 at 0.5 A g−1, respectively. Besides, they can effectively and selectively catalyze the oxidation of various sulfides to sulfoxides. [ABSTRACT FROM AUTHOR]

The 2,3,4,5,6-pentaphenyl-1,2-azaborinin-1-yl (PPAB) potassium complex 1 undergoes facile salt metathesis with 9,10-dibromo-9,10-dihydroboraanthracene (DBABr2), 5-bromodibenzo[b,d]borole (DBBBr), 1-chlorotetraphenylborole (TPBCl) and dibromo(phenyl)borane (BBr2Ph) to yield the corresponding N-borylated azaborinines N-DBABr-PPAB (2, which hydrolyses and dimerises to the oxo-bridged N,N′-O(DBA)2-(PPAB)2, 3), N,N′-DBA-(PPAB)2 (4), N-DBB-PPAB (5), N-PPB-PPAB (7) and N-BBrPh-PPBA (9). Stepwise reduction of 4 yields the corresponding stable radical anion 4˙− and dianion 42−. One-electron reduction of 5 with KC8 yields the purple radical anion 5˙−, which forms a highly insoluble coordination polymer. 5˙− undergoes very slow radical intramolecular ortho-C–H activation at the C4-phenyl substituent of the PPAB moiety, yielding a BN-analogue of the 5,5′-spiro-bi[dibenzoborole] anion, [6]K. Compound 7 cannot be isolated and undergoes spontaneous and diastereoselective 2,5-anti-addition of the ortho-C–H bond of the PPAB C4-phenyl substituent to yield a novel BNB-analogue of the triply fused dihydrocyclopenta[l]phenanthrene cation, compound 8. Finally the one-electron reduction of 9 results in the ortho-C–H activation of the PPAB C4-phenyl substituent at an in situ-generated dicoordinate boryl anion (10), resulting in the formation of a BNB-analogue of 9H-fluorene, the borate 11−. DFT calculations provide a rationale for the diverse C–H activations observed in these reactions. [ABSTRACT FROM AUTHOR]

This study focused on the design and synthesis of two Cu-based coordination polymers, [Cu2(4-dpye)(5-HSIP)(μ3-O)(H2O)2]·3H2O (Cu-CP-1) and [Cu(4-dpye)0.5(BCA)2] (Cu-CP-2), where 4-dpye = N,N′-bis(4-pyridinecarboxamide)-1,2-ethane, 5-H3SIP = 5-sulfoisophthalic acid, and HBCA = benzoic acid, by using a hydrothermal method. Single-crystal X-ray diffraction (SCXRD) study revealed that by adding various auxiliary ligands, the architectures of the Cu-CPs could be altered, yielding two distinct multinuclear Cu clusters. Moreover, the Cu-CPs can be used as urease inhibitors (UIs). In vitro experiments showed that the Cu-CPs had good urease inhibition effects with IC50 values of 0.53 ± 0.01 μM for Cu-CP-1 and 1.44 ± 0.01 μM for Cu-CP-2 and 98.48% (Cu-CP-1) and 96.27% (Cu-CP-2) inhibition of urease was achieved at a concentration of 100 μM, respectively. Furthermore, the inhibition effect of the tetranuclear Cu-CP was better than that of the binuclear Cu-CP. To better understand the potential mechanism of inhibition of the two copper complexes, we performed kinetic analysis using Lineweaver–Burk (L–B) plots in the presence of different concentrations of urea and different concentrations of inhibitors, and both Cu-CP-1 and Cu-CP-2 showed a non-competitive mode of inhibition. In addition, molecular docking analysis showed that the Cu-CPs were able to enter well into the urease binding pocket, thus interacting with key amino acid residues of urease to different degrees. Both kinetic and molecular docking studies theoretically explain and demonstrate the inhibition effect of both Cu-CPs on urease activity in vitro, which is expected to provide reasonable guidance and effective strategies for the development of novel, efficient, stable and safe CP-based UIs. [ABSTRACT FROM AUTHOR]

It is challenging to explore novel-structure lanthanide coordination polymers (Ln-CPs) for sensing environmental pollutants. Herein, we designed and synthesized an organic bridging linker 3-(carboxymethoxy)-1-(carboxymethyl) pyrazole-4-carboxylic acid (H3ccpc), and then successfully prepared and characterized a novel Ln-CP, namely [Tb2(ccpc)2(H2O)6]·1.5H2O (ccpcTb). Structural analysis indicates that ccpcTb exhibits a two-dimensional structure, in which Tb ions are in an eight-coordinated environment. The photoluminescence performance of ccpcTb was discussed in detail. The ccpcTb displays bright green luminescence and behaves as a multi-responsive luminescent sensor toward Fe3+ ions, Cr2O72− ions and 2,4,6-trinitrophenol with high selectivity and low detection limits. Furthermore, the possible luminescence sensing mechanisms have been addressed in detail. The luminescence quenching mechanism of sensing Fe3+ and Cr2O72− is attributed to the energy competitive absorption, while that of sensing TNP is due to the synergistic effect of energy competitive absorption and photo-induced electron transfer. [ABSTRACT FROM AUTHOR]

This document is a back cover of an article titled "Diversity of oxidation state in copper complexes with phenolate ligands" published in the journal Dalton Transactions: An International Journal of Inorganic Chemistry. The article discusses the progress made in the redox chemistry of Cu-phenolate complexes, including the discovery of various oxidation states such as Cu II -phenoxyl radical complexes, Cu III -phenolate, Cu I complexes with phenoxyl radicals, and Cu IV -phenolate complexes. The article focuses on the correlation between geometric and electronic structures of these complexes. The article also mentions the authors of the research, Tomoyuki Takeyama and Yuichi Shimazaki, and their affiliations at Sanyo-Onoda City University and Ibaraki University in Japan. [Extracted from the article]

The document is the front cover of the journal "Dalton Transactions: An International Journal of Inorganic Chemistry" published on March 7, 2024. The journal features an article titled "Intensity and lifetime ratiometric luminescent thermometer based on a Tb(III) coordination polymer" by Augusto I. Costa, Miguel Julve, Maria Vanda Marinho, and others. The journal is known for its commitment to open access, global readership, rigorous peer review, affordability, and inclusivity of scientists from all career stages and countries. [Extracted from the article]

Highly connected molecular building blocks (MBBs) have been demonstrated to play a crucial role in reticular chemistry, particularly in predicting the topologies of metal–organic frameworks. Metal phosphonate clusters exhibit considerable advantages in constructing high-connectivity MBBs, owing to the multiple coordination modes offered by phosphonic ligands. Herein, four metal (M = CoII, MnII) phosphonocarboxylate frameworks (CoPCF-1,2 and MnPCF-1,2) were successfully prepared under solvothermal conditions by utilizing the phosphonocarboxylic ligand, 4′-phosphonobiphenyl-3,5-dicarboxylic acid (H4pbpdc), and their structural characterization was performed using single-crystal X-ray diffraction (SCXRD). The structures feature a duodenary nuclear M12(µ3-OH)2(CO2)12(PO3)6(DMF)6/(CH3COO)4.5 cluster, bearing resemblance to the well-known Wells–Dawson ion from polyoxometallate chemistry. It is the first time a Wells–Dawson type cage has served as an 18-connected molecular building block, forming two kinds of porous metal phosphonocarboxylate frameworks with novel (3,18)-connected gez and gea topologies. Their permanent porosities were confirmed through N2 adsorption studies. Notably, the MBB Co12 cluster-based CoPCF-1 shows a loss and recovery process of µ3-OH through single-crystal-to-single-crystal (SCSC) transformation. The magnetic properties of the four compounds exhibit antiferromagnetic behavior. [ABSTRACT FROM AUTHOR]

A comprehensive study on the synthesis and characterization of NHC-ligated nickel(II) cyanoborates (CBs) is presented (NHC = N-heterocyclic carbene). Nickel(II) cyanoborates Ni[BH2(CN)2]2·H2O (Ib·H2O), Ni[BH(CN)3]2·0.5H2O (Ic·0.5H2O), Ni[B(CN)4]2·H2O (Id·H2O) were reacted with selected NHCs of different steric size. The reaction of the nickel cyanoborates with small to medium-sized NHCs Me2ImMe and iPr2Im (R2Im = 1,3-di-organyl-imidazolin-2-ylidene; R2ImMe = 1,3-di-organyl-4,5-dimethyl-imidazolin-2-ylidene) afforded cyanoborate salts containing the rare homoleptic fourfold NHC-ligated nickel(II) cations [Ni(NHC)4]2+ (NHC = Me2ImMe (1c–d), iPr2Im (2c–d)) and cyanoborate counter-anions. Bulkier NHCs such as Mes2Im and Dipp2Im afforded complexes trans-[Ni(NHC)2(CB)2] (trans-4b, trans-5c). For the combination of the cyanoborate anion [BH2(CN)2]− and iPr2ImMe the salt of the tris-NHC complex [Ni(iPr2ImMe)3(NC-BH2CN)][BH2(CN)2] (3b) was isolated. Salt metathesis of NHC-ligated nickel(II) halides (Ni(NHC)2X2) (X = Cl, Br) with silver(I) and alkali metal cyanoborates were used to synthesize mono- and disubstituted coordination compounds of the type cis- or trans-[Ni(NHC)2(CB)X] (cis-10c, cis-11c, trans-12b) and cis- or trans-[Ni(NHC)2(CB)2] (cis-13b, cis-14a–c, trans-14a–b, trans-15b, trans-5b). Further investigations reveal that NHC-ligated cyanoborate complexes can act as building blocks for coordination polymers, as observed for structurally characterized 1∞ {trans-[Ni(Mes2Im)2(μ2-[NC–BH2–CN])2]·2Ag(μ2-[BH2(CN)2])} (trans-5b·Ag). This study demonstrates the diverse character of cyanoborates in coordination chemistry as both, non-coordinating counter-anions, and weakly to medium coordinating anions forming novel transition metal complexes and salts. It provides evidence that a proper choice of cyanoborate and a proper choice of co-ligand can lead to a rich coordination chemistry of cyanoborate anions. [ABSTRACT FROM AUTHOR]

Studying the effect of morphology on the circularly polarized luminescence (CPL) of chiral molecular materials is important for the development of CPL-active materials for applications. Herein, we report that the morphology of Gd(NO3)3/R-,S-AnempH2 [AnempH2 = (1-anthrylethylamino)methylphosphonic acid] assemblies can be controlled by solvent modulation to form spiral bundles Gd(R-,S-AnempH)3·2H2O (R-,S-1), crystals Gd(R-,S-AnempH)3·2H2O (R-,S-2) and spindle-shaped particles Gd(R-,S-AnempH)3·3H2O·0.5DMF (R-,S-3) with similar chain structures. Interestingly, R-,S-1 are CPL active and show the highest value of dissymmetric factor among the three pairs of enantiomers (‖glum‖ = 2.1 × 10–3), which is 2.8 times larger than that of R-,S-2 , while R-,S-3 are CPL inactive with ‖glum‖ ≈ 0. This work provides a new route to control the morphology of chiral coordination polymers and improve their CPL performance. [ABSTRACT FROM AUTHOR]

A series of Ru(II) and Ir(III) based photoluminescent complexes were synthesised that incorporate an ancillary 2,2′-bipyridine ligand adorned with either one or two pendant N-methyl imidazolium groups. These complexes have been fully characterised by an array of spectroscopic and analytical techniques. One Ir(III) example was unequivocally structurally characterised in the solid state using single crystal X-ray diffraction confirming the proposed formulation and coordination sphere. These complexes were then transformed into their heterometallic, Au(I)-containing, analogues in two steps to yield either bi- or trimetallic complexes that integrate {Au(PPh3)}+ units. X-ray diffraction was used to corroborate the solid state structure of the hetero bimetallic complex, based upon a Ru(II)–Au(I) species. The heterometallic complexes all displayed red photoluminescent features (λem = 616–629 nm) that were consistent with the parent Ru(II) or Ir(III) lumophores in each case. The modulation of the emission from the Ru(II)–Au(I) complexes was much more strongly evident than for the Ir(III)–Au(I) analogues, which is ascribed to the inherent differences in the specific triplet excited state character of the emitting states within each heterometallic species. [ABSTRACT FROM AUTHOR]

We successfully synthesized a one-dimensional cobalt sulfate coordinating polymer, whose simple hydrogen bond web structure facilitated the analysis of the proton transfer process. At 175 °C, without humidity, the conductivity is 0.0311 S cm−1, which exceeds those of most of the organic inorganic hybrid materials under anhydrous conditions (world record rank 8). Based on its crystal structure and theoretical calculations, the subversive proton conduction pathway was inferred clearly. We, for the first time, found that the proton smartly chose the path with a lower energy barrier but not the one with short distance to transport avoiding short circuit. [ABSTRACT FROM AUTHOR]

Photocontrolled magnetic properties are fundamental for the applications of molecular magnets, which have the features of high time and space resolution; however, such magnetic properties are highly challenging to be achieved owing to the weak light–matter interactions. Herein, the influence of in situ light irradiation on the field-induced magnetization dynamics of two Er(III) coordination polymers 1 and 2 with the same coordination skeletons but different halogen substituents was studied. 1 and 2, and their in situ photoexcited products 1a and 2a, display field-induced magnetization dynamics based on Orbach and/or Raman processes. The magnetization dynamics are fine-modulated by the synergetic effect of light irradiation and a ligand substituent, due to the charge re-distribution of the excited states of the ligand. [ABSTRACT FROM AUTHOR]