Search

• Two different assembled honeycomb structures were designed and studied. • The structures can be transformed by changing the length of connection plates. • The energy absorption capacity of re-entrant honeycomb was investigated. • Re-entrant honeycomb has higher energy absorption than hexagonal honeycomb. Fabricating auxetic metamaterials via an assembling process is a novel and economic method. In this work, an assembled structure that could realize the conversion of positive and negative Poisson's ratio by changing the length of the connection plates was proposed. Two different honeycomb structures of the assembled re-entrant honeycomb (ARH) and assembled hexagonal honeycomb (AHH) were designed, manufactured and studied numerically and experimentally. Dimensions of the two assembled honeycomb structures are consistent. The nominal stress–strain curves of the two assembled honeycombs have similar initial peak stresses, but the assembled re-entrant honeycomb has a higher bearing capacity and shorter stress plateau. Subsequently, the mechanical properties of ARH were studied by changing the three parameters of corrugated plates. Besides, the energy absorption and specific energy absorption of the assembled re-entrant honeycomb were investigated through the numerical method. Finally, the assembled honeycomb structure with the suitable parameter was determined. Tunable mechanical properties of the assembled auxetic structures can be obtained by varying the length of the connection plates. This strategy of assembly can reduce the costs of manufacturing and improve transportation efficiency. The proposed assembled structures are promising in civil and protective engineering. [ABSTRACT FROM AUTHOR]

• A novel composite is proposed by filling layered re-entrant honeycombs with concrete. • The mechanical properties and failure modes of two types of specimens under uniaxial compression are investigated. • The proposed auxetic composite exhibits an enhanced stiffness and shear resistance. • The effects of cell angle and cell wall thickness on the mechanical properties are investigated. Auxetic materials exhibit desirable mechanical properties, e.g., fracture resistance, shear resistance and energy dissipation due to their unique deformation characteristics. Honeycomb sandwich structures also have superior properties, e.g., energy absorption performance and low density. These desirable characteristics enable them as promising alternatives for building construction to meet the modern construction requirement which a higher safety standard is needed. In this study, a novel concrete composite with auxetic layered honeycomb was designed, manufactured and investigated for exploring the load-bearing performance of auxetic metamaterials under quasi-static compression. The layered honeycomb sandwich structure was analyzed by quasi-static compression test and its energy absorption performance was evaluated. Numerical models, validated by experimental results, were employed in parametric studies to further examine their performance. The results show that the layered structure has higher initial peak stress and stable platform stress. Moreover, it could improve the shear resistance and overall stability of the structure. These findings are beneficial to the applications of auxetic metamaterials in building construction. [ABSTRACT FROM AUTHOR]